Project:
Item#
C.S.I. Section 11400
OV851G
Revolving Tray Oven
FEATURES
Ideal for a variety of baking & cooking such as bread, pizza, bagels and pies
Digital controls
Tray position display
Timer
Splash tolerant vents
Ventilation hood accommodates Type I and Type II ventilation standards
Service accessible from front of the oven
All stainless steel front and exterior wall panels
Center controls have run, reverse and auto
Windowed loading door slides upward, out of the way, to expose a full width
12 high opening
Single point vent connection
Seam finish trim for one side
OPTIONS
Advanced controls with Auto-Start
Perforated steel trays
Hi/Low burner
Hi/Low is not available with Auto-Start option
Prison package
Side seam finish trim for both sides
Rear seam finish trim
Area Reserved For Consultant & Contractor Approvals
19220 State Route 162 East
Orting, WA 98360
www.baxterbakery.com
BX56016 (03-10) Printed In USA
Factory
(360) 893-5554
Customer Care
(800) 777-2828
or
(800) 462-2778
Customer Care Fax
(937) 332-2852
Page 1 of 2
C.S.I. Section 11400
OV851G
Revolving Tray Oven
GAS
97.1
(246.6 cm)
CONTROL
CIRCUIT
CONNECTION
EXHAUST
17.8 (45.2 cm)
HOOD
12 (30.5 cm)
DOOR
5.75
95.5
(242.6 cm)
OVERALL
HEIGHT
45 (114.3 cm)
SILL
(14.6 cm)
3.5 (8.9 cm)
SILL EXTENSION
18-pan: 92.5
24-pan: 110.5
30-pan: 128.5
36-pan: 146.5
101.4
(257.6 cm)
(114.3 cm)
(280.7 cm)
(326.4 cm)
(372.1 cm)
Requires duct and ventilator per local code.
UTILITIES
INSTALLATION
Gas Connect Point: 1 pipe size
Natural gas @ 5"-14" w.c. when firing
Propane gas @13"-14" w.c. when firing
A factory technician or factory authorized service technician MUST supervise and
approve any installation. Purchaser is responsible for all installation costs and for
providing:
Power: 120V/60 Hz/1 phase/6.6 amps
Hood: Suitable for Type I or Type II applications. Connection size and cfm
requirement vary by model. See chart below for specific information. All require
0.6"w.c. static pressure drop @ hood connection.
Type I: For grease laden vapors, products of combustion.
(See NFPA 96 and consult local building officials.)
TYPE II: For heat, steam, odors and products of combustions
Customer to supply duct and ventilator fan per local code. If accepted by local building
officials, suitable for connection to Type B pipe except when products of baking are
grease laden. Airflow proving switch is factory installed and integrated with burner
system operation. Oven provided relay with max 4.0 amp 1 6 H.P. @ 120V output for fan
operation.
Model
Description
Weight
(lbs.)
Labor to unload oven upon arrival
Installation mechanics
All local service connections per local code electricity, gas and ventilation
Disposal of packaging material
NOTE: Floor should be level within 1 8 per foot for proper installation. Slope
should not exceed 3 4 in all directions under the unit.
CLEARANCE TO COMBUSTIBLES:
Top: = 3
Sides & Back = 1
For use only on noncombustible floors.
Trays
Qty.
Venting
Size
Propane
Duct
Dia.
250,000
200,000
8"
18-Pan
5121
58.0"W x 26.0"D
24-Pan
5812
76.0"W x 26.0"D
30-Pan
6429
36-Pan
7122
BTU/Hr.
Natural
Gas
94.0"W x 26.0"D
112.0"W x 26.0"D
300,000
250,000
350,000
300,000
CFM
700
900
10"
1200
1400
Manufacturer reserves the right to make changes in sizes and specifications.
19220 State Route 162 East
Orting, WA 98360
www.baxterbakery.com
Page 2 of 2
Factory
(360) 893-5554
Customer Care
(800) 777-2828
or
(800) 462-2778
Customer Care Fax
(937) 332-2852
BX56016 (03-10) Printed In USA
