FOR PROFESSIONALS

FLAIL MOWERS - MULCHERS

REAR, FRONT AND SIDE
EXTENSION ARMS AND FITTINGS

TYPES OF FLAIL KNIVES

FLAIL MOWERS
KNIFE TYPE I

KNIFE TYPE II

Designation: grass shrubs, stalks,

trimming remnants, stubbles
Max. diameter of cut branches: 80 mm

Designation: grass, shoots, spikes, stalks,

shrubs, mowing remnants, hay
Max. diameter of cut branches: 35 mm

GENERAL DATA

TABLE OF CONTENTS:
FLAIL MOWERS

p. 3

GENERAL DATA

PIKO - REAR AND FRONT

p. 4

LIGHT CLASS

KB - REAR AND FRONT

KNIFE TYPE III

KNIFE TYPE IV

Designation: grass, shoots, spikes, stalks,

shrubs, mowing remnants, hay
Max. diameter of cut branches: 35 mm

Designation: grass, tobacco, shoots, spikes,

stalks, shrubs, mowing remnants, hay
Max. diameter of cut branches: 35 mm

p. 6

MIDDLE CLASS

GRINO - REAR AND FRONT

p. 6 - 7

MIDDLE CLASS

KNIFE TYPE V

KNIFE TYPE VI

Designation: grass, stubbles

cornstalks, branches, shrubs

Designation: grass, shrubs, stalks,

trimming remnants, stubbles

Max. diameter of cut branches:

KB - REAR AND FRONT

Max. diameter of cut branches:

50 mm

are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this
type are used for mowing grass, shrubs, bushes (up
to 10 cm) and cutting weeds on uncultivated areas to leave windrows. Particularly useful in mo-

80 mm

wing road shoulders, ditches, as well as slopes and

counter-slopes. Mulchers are designed for mowing
grass, shredding it into pieces and then spreading
the material all over the mowed area. This enables obtaining a natural windrow, mineralisation of

FLAIL MOWERS - MULCHERS

p. 8 - 9

MAMUT - REAR AND FRONT

LIGHT CLASS - LAMA

p. 10

133

HEAVY DUTY

KNIFE TYPE VII

KNIFE TYPE VIII

Designation: grass, plant stalks

KBK / RIO

p. 11

Max. diameter of cut branches:

108

HEAVY DUTY
Designation: grass, plant stalks,
shrubs, shoots, thin branches

20 mm

Max. diameter of cut branches:

REAR (WITH DAMPER)

108 mm

2. Mulching shrubs and bushes (up to

3. Ground following bar with diameter -

20 mm

8 cm)
133 mm

4. Fair operating conditions

AGRICULTURAL HEAVY DUTY

KBR - REAR AND SIDE

1. Drive shaft with diameter -

p. 12

MIDDLE CLASS

KNIFE TYPE X
Designation: grass, plant stalks,
small shrubs, branches
Max. diameter of cut branches: 35 mm

Max. diameter of cut branches:

35 mm

p. 14 - 15

PANTOGRAPH
HEAVY DUTY

KOLIBER - EXTENSION ARM

FLAIL KNIFE TYPES

p. 20 - 21

REAR + EQUIPMENT

KWT - EXTENSION ARM

p. 16- 17

REAR + EQUIPMENT

CAMEL - EXTENSION ARM

p. 18 - 19

REAR + EQUIPMENT

OPERATING FITTINGS

EMU - HARvESTING FLAIL

MOWER WITH bIN

HEAVY DUTY
133

KBRP - REAR SIDE ON

MIDDLE CLASS

168

MIDDLE CLASS

KNIFE TYPE IX
Designation: grass, plant stalks,
small shrubs, branches

168

p. 13

PANTOGRAPH

168

KANGU - REAR SIDE ON

p. 22 - 23

p. 24

Type

STANDARD

OPTION

PIKO

vII

vIII, X

GRINO

II, III, Iv

KB

II, III, Iv

MAMUT

vI

II, III, Iv

1. Drive shaft with diameter -

KBK

II, III, Iv

2. Mulching shrubs and bushes (up to

RIO

vI

II, III, Iv

3. Ground following bar with diameter -

KBR

II, III, Iv

KANGU

II, III, Iv

KBRP

II, III, Iv

LAMA

vII

vIII, IX

KW

II, III, Iv

EMU

4.

133 mm

1. Drive shaft with increased diameter 8 cm)

168 mm

168 mm or

203 mm (Mamut, Rio)

2. Mulching shrubs and bushes (up to

3. Ground following bar with diameter -

10 cm)
168 mm

4.
5. Sliding skids and internal cover made of Hardox
steel
6.
7. Higher durability of thick-walled drive shaft and
ground folowing bar

FLAIL MOWERS

FLAIL MOWERS

REAR AND FRONT

LIGHT CLASS

REAR AND FRONT

MIDDLE CLASS

are
perfect for mowing uncultivated areas, paths in orchards, cutting weeds, shrubs and
grass on uncultivated areas.
Durable housing and inclined
rubber shield enable safe
mowing nearby roads, parks

PIKO mower is designed for treatment of

recreational areas, squares, pitches and idle
areas. PIKO mower is perfect for aggregation
with low-power orchard tractors. Upon mowing, leaves even and smooth surface. Application of highly durable materials provides
long and reliable operation. Effectively sealed
bearings and their high durability provide
long, fault-free operation of essential subas-

living areas.

semblies. PIKO mower can be aggregated typically with tractors on a tractors 3-point linkage Cat. I (3-point linkage Cat. I). Mower can
be mounted both at tractors rear and front,

Option with hydraulic shift within

up to 40 cm - for
charge (not applicable Kb 110)

Mower is optionally equipped with hydraulic shift (H) to

which improves general comfort of operation.

provide easier passing of obstacles and adjusting the

most comfortable turning.

1.
res, pitches, road shoulders, parks of moderate
congestion.

2. Is used for levelling surfaces and molehills, mowing, shredding grass and weeds, which if scattered over the surface putrefy faster and fertilize
green areas.

1. Cross traverse by 32 cm possible (option)

2. Mounting mower both at tractors rear and front
possible
3. Innovative solution for protection of bearings
and their lubrication
4. Mower is equipped with 3 types of knives: light
of metal sheet, heavy forged and Y-type knives
5. Mowers body has casing featuring high resistance to abrasion
6. Standard PTO shaft

Type

Operating
width
[m]

Operating
output
[ha/h]

Knives
[pcs.]

1,00

~ 1,00

26

1,30

~ 1,30

34

1,50

~ 1,50

40

Cutting
shaft
diameter
[mm]

Tractor
power
[HP]*

PTO
[rpm]

3-point
linkage
Cat.

from 20
108

from 30
from 35

540

Measurements
w / l / h.
[cm]

Weight
[kg]

87 / 129 / 83

175

87 / 159 / 83

200

87 / 200 / 83

220

* Note Power values are given for municipal works (few mowing occasions per year). When mounting mower at tractors front, tractors power value
needs to be 30% bigger.

4. Perfect ground following for even mowing height

1. Mulching shrubs and bushes (up to 8 cm)
2. Mowing weeds and grasses on uncultivated are-

5. Silent cutting shaft

6. Top quality protective chains at the front and
rubber shield at the back provide more accurate
protection against thrown stones
7. PTO shaft with overruning clutch as standard

1.
precise mounting and bolt arrangement on bar imditions
2. Mounting on tractors either front or rear 3-point
linkage
3.

Type

Operating
width
[m]

Operating
Knives
output
[pcs.]
[ha/h]

1,10

~ 0,50

10

1,40

~ 0,60

12

1,60

~ 1,00

14

v-belts
[pcs.]

Cutting
shaft
diameter
[mm]

8. Mowing height adjustment from 3 to 8 cm thanks

to ground following bar
9.
Easily replacable skids made of HARDOX steel
11. Additional internal and external strenghtening
of housing with hardened HARDOX steel

Tractor
power
[HP]*

PTO
[rpm]

3-point
linkage
Cat.

from 20
4

133

from 40

540

I-II

from 60

** If Kb 140 or Kb 160 mowers are ordered for tractors front then gear 1000 rpm should be ordered as well.

Measurements
w/l/h
[cm]

Weight
[kg]

140 / 109 / 90

325

180 / 125 / 90

465

190 / 125 / 90

500

FLAIL MOWERS
REAR AND FRONT
MIDDLE CLASS

Grino can be aggregated

typically with tractors on
a tractors 3-point linkage
of Cat. I or II (Cat. II / Cat.
II). Flail shaft is powered
by tractors PTO shaft, while
the shift by tractors hydraulics. Mower can be mounted
both at tractors rear and
front, which improves general comfort of operation.
Mower is additionally equipped with transverse shift
option to provide easier
passing of obstacles and
adjusting the most comfortable turning.

Perfect for

1. Drive transmission by belt gear functions as overload clutch

2. In order to prepare mower for operation at tractors front, re-mount upper holder at mowers opposite side and re-install it at PTO shafts opposite side.
If tractor features left-hand rears, these can be user-changed by dismounting central gear
and turning it around by 180

1. Mowing shrubs and bushes, shredding branches

of max. diameter of 5 cm
2. Cutting weeds and grass on uncultivated areas, treatment of sterile pastures and operation on
green areas (orchards, vineyards)

1.
cise mounting and arrangement of bolts on shaft
conditions
2.
168 mm) improves its stiffness and peripheral speed of knives
3. Mounting on 3-point linkage at tractors front or
rear
4.
5.

6.
height
7. Top-quality metal sheet guards at mowers front
and rubber guard at mowers rear provide effective
protection against thrown out stones
8. Standard-delivered PTO shaft
9. Adjustment of mowing height within range of 3
and 8 cm with use of ground following bar
Strengthened enclosure and enhanced bea-

3. Mower is hydraulically adjustable in relation to either tractors left or right side. Features
standard-mounted hydraulic cylinder
4. New stronger housing has been designed to provide effective protection of bearings against
dirt, while extending mowers lifespan

Type

11. Easily replaceable skids made of durable Hardox steel

12. Additional internal and side strengthening of
enclosure made of hard and durable Hardox steel
13. Standard-delivered overrunning clutch in intersecting axis gear
14. Innovative solution for protection of bearings
and their lubrication
15. Cross traverse by 50 cm possible

Operating
width
[m]

Operating
output
[ha/h]

Knives
[pcs.]

1,80

~ 1,60

24

2,00

~ 1,80

30

2,20

~ 2,00

36

Cutting
shaft
diameter
[mm]

168

Tractor
power
[HP]*

from 90

PTO
[rpm]

540 / 1000

3-point
linkage
Cat.

I/II

Measurements
w/l/h
[cm]

Weight
[kg]

205 / 115 / 104

570

225 / 115 / 104

610

245 / 115 / 104

640

* Note! Power values apply only to municipal works - few mowing occasions per year.
** Mower is standard-equipped with a 540 rpm option. For mounting mower at tractors front, change rpm amount to 1,000 rpm
by adjusting belt gear.

FLAIL MOWERS

KB 182

REAR AND FRONT

HEAvY DUTY

have new drive shafts with

increased diameter
168
applied, owing to which
overall durability of the
sub-assembly is improved.
cation enables mulching
bushes and branches with
diameter of up to 8 cm.

KB 252

4
3
1

Kb
heavy
duty
mowers
have also increased
diameter and thickness
-

8
16

1. Shift is possible thanks to hydraulic

6. Drive transmission through belt gear acts as
overload clutch

(1,5kg) with bolt arrangement are mounted ope.

7. PTO shaft with overrunning clutch as standard

8. Operating height adjustment from 3 to 8 cm
thanks to ground following bar

1. Mulching shrubs and bushes (up to 8 cm)

2. Mowing weeds and grass on uncultivated areas.

9.

cated inside to protect them against damage

through shifting of operating assembly over guides

2. Innovative construction of frame and cutting shaft make up compacted

front

3. Linkage with cutterbar suspended on tube guides

Easily replaceable skids made of HARDOX steel

11.

4.

12. Perfect ground folowing for even mowing

1.

height
13. Top quality protective chains at the front and

2. Mouting with use of 3-point linkage either on

tractors front or rear
3. Hydraulic shift of cutterbar in relation to tractors
axis
4. Internal shield of cutterbar made of HARDOX
steel
5. Solid and durable construction

rubber shield at the back provide more accurate

Type

Operating
width
[m]

Operating
output
[ha/h]

KB 182

1,80

~ 1,30

protection against thrown stones

14.

Cutting
shaft
diameter
[mm]

Tractor
power
[HP]*

PTO
[rpm]

3-point
linkage
Cat.

from 70

Dimensions
w/l/h
[cm]

Weight
[kg]

215 / 112 / 105

700

230 / 112 / 105

715

280 / 112 / 105

840

16

from rear to front upon re-installation of upper

link mounted on two pins
15. Thick-walled drive and ground following shafts

Knives
[pcs.]

KB 252

2,00

~ 1,60

2,50

~ 2,20

168
20

from 80

1000

from 90

II

for higher durability

* Note! Power values apply only to municipal works - few mowing occasions per year.

FLAIL MOWER

FLAIL MOWERS

KBK 181

REAR AND FRONT

HEAvY DUTY

REAR (WITH DAMPER) - AGRICULTURAL

HEAvY DUTY

KBK 251

Mamut can be aggregated

typically with tractors on
tractors 3-point linkage Cat.
II (3-point linkage Cat. II). Flail shaft is powered by tractors
PTO shaft, while the shift by
tractors hydraulics. Mower can
be mounted both at tractors
rear and front, which improves

general comfort of operation.

1.
soil fertalisation aiding plants (lupinus, phacelia, sias plant remains like thick stalks as corn stalks for
ploughing.
2. It is also used for treatment of sterile pastures and
maintenance of green areas which are not cultivated.

1. Flail mowers are perfect for corn, grain, tobacco

stubbles, etc.
2. Mulching corn stubble is an effecting way to

1. Cross traverse by 50 cm possible

2.
3. Mounting mower both at tractors rear and front

4.

possible
4.

diameter - KbK

203 mm) improves

the shafts lifespan

5. Innovative solution for protection of bearings

5.
6. Perfect ground following for optimal mowing
quality
7.
8. Top quality protective chains

7. Mower is equipped with new generation of hea-

KbK mowers have been equipped with an outlet

damper, which enables free windrow distribution outside the machine, what in result reduces
tractors power consumption.

quality
9.

Type

2,80

~ 2,80

36

203

9.
Drive transmission through belt gear acts as

8.

Cutting
shaft
diameter
[mm]

203 applied to extend

applied

been reduced

Knives
[pcs.]

168. RIO

its stiffness and peripheral speed of knives

steel, owing to which mowers overall weight has

Operating
output
[ha/h]

under heavy loads

inner made of HARDOX steel

6. Mowers body is made of 7 mm thick HARDOX

Operating
width
[m]

2. Strenghtened linkage designed for operation

3. Mulchers housing comprises two shields - the

plantations more frequently than ever.

and their lubrication

Mower is additionally equipped with transverse

shift option to provide easier passing of obstacles
and adjusting the most comfortable turning.

1. Outlet damper

Standard-delivered PTO shaft

overload clutch
11. PTO shaft with overrunning clutch as standard
12. Possibility of mounting hydraulic cylinder for
cutterbar shifting

11. Solid and durable construction

12.

Tractor
power
[HP]*

PTO
[rpm]

from 140

1000

3-point
linkage
Cat.

Dimensions
w/l/h
[cm]

Weight
[kg]

II

300 / 124 / 106

1040

Type

Operating
width
[m]

Operating
output
[ha/h]

KBK 181

1,80

~ 1,30

2,00

~ 1,60

2,50

~ 2,20

20

2,80

~ 2,80

36

KBK 251

Knives
[pcs.]

16

Cutting
shaft
diameter
[mm]

Tractor
power
[HP]*

PTO
[rpm]

3-point
linkage
Cat.

from 70
168

from 80
from 90

203

1000

from 140

* Note! Power values apply only to municipal works - few mowing occasions per year.

I/II

II

Dimensions
w/l/h
[cm]

Weight
[kg]

216 / 136 / 105

625

230 / 136 / 105

645

285 / 136 / 105

770

300 / 121 / 104

1050

11

FLAIL MOWERS

FLAIL MOWERS

REAR AND SIDE

MIDDLE CLASS

REAR AND SIDE ON PANTOGRAH

MIDDLE CLASS

KBR mowers are machines moun-

Kangu can be aggregated typically with tractors

on tractors 3-point linkage Cat. II (3-point linkage
Cat. II). Flail shaft is powered by tractors PTO shaft,
while the shift by tractors
hydraulics. Mower can be
mounted at rear also. Mow-

ted on tractors rear 3-point linkage. They are perfect for mowing
road shoulders, ditches, slopes,
greenery belts (inclination up to
-65, +90). Strong, thick-walled
1. Mowing weeds, grass and mulching shrubs and

shrubs and bushes up to 8 cm diameter).

The mower is
protected against
damage
in case of driving onto an
obstacle by hydraulic
safety
device,
which
forces its retraction and at the same time lifts the machine up even
up to 50 cm thanks to hydraulic cylinder. Upon passing
by an obstacle the mower automatically returns to its
operating position - no operators action required.

Type

Operating
width
[m]

Operating
output
[ha/h]

Knives
[pcs.]

1,40

~ 0,60

12

bushes on uncultivated areas

2. Hydraulic safety device as standard
3. Adjustable mowing height from 3 to 8 cm with
use of ground following bar
4. Hydraulic cylinder as standard
5. Double shield of cutterbar where the inner is
made of HARDOX steel
6. Drive transmission through belt gear acts as
overload clutch
7. Adjustable pins enable machine shift either right
or left in relation to tractor
8.
and angular gear as standard
9. PTO shaft with overrunning clutch as standard

12

~ 1,00

14

1.

1. Flail knives of high quality

road shoulders and operation on green areas (or-

2. Large ground following roller

chards, vineyards).

3. Mowers body is made of HARDOX steel

4. Mower is mounted on a standard
tractors 3-point linkage
5. Thanks to application of a pantograph mowing
is possible in many positions
6. Standard hydraulic control

90

65

KBR mowers are machi-

7. Cross traverse by 160 cm possible

8. Innovative solution for protection of bearings

Durability, versatility and

high operating output.
Perfect for mowing slopes (inclination up to
-65, +90).

and their lubrication

9.
quality
Standard mechanical safety breakaway device
11. Standard PTO shaft

Cutting
shaft
diameter
[mm]

Tractor
power
[HP]*

PTO
[rpm]

3-point
linkage Cat.

540

II

from 50
133

1,60

er is additionally equipped
with transverse shift option
to provide easier passing of
obstacles and adjusting the
most comfortable turning.

from 70

* Note! Power values apply only to municipal works - few mowing occasions per year.

Weight
[kg]
670

Type

Operating
width
[m]

Operating
output
[ha/h]

Knives
[pcs.]

1,40

~ 1,20

26

Cutting
shaft
diameter
[mm]

Tractor
power
[HP]*

1,90

~ 1,80

34

3-point
linkage
Cat.

540

II

from 90
133

705

PTO
[rpm]

from 90

Dimensions
w/l/h
[cm]

Weight
[kg]

198 / 207 / 167

490

248 / 207 / 167

620

13

FLAIL MOWERS
REAR SIDE
ON PANTOGRAPH
HEAvY DUTY

KBRP rear

side

conditions

type

KBRP mowers are machines mounted on tractors rear. These machines are perfect for mowing road
shoulders, slopes, green division
belts (incination up to -60; +90).
Mowers equipped with type I knives are able to shred trunks with
diameter even up to 8 cm.

90

complement our offer of

heavy duty machines designed for maintenance of
green areas and roads. These are machines which meet
demands of both agricultural
as well as municipal services.

60

and
unbelivable durability of components guarantee reliable operation even with load exceeding
1,500 manhour anually.

KBRP with extension arm applied,

thanks to wide range of shifting
(172 cm), enables operation as either rear or side type mower.

may reach even 60.

2. Retracting cutterbar when driving onto an obstacle

1. Enabling lifting of cutterbar when driving over

an obstacle

cylinder enables smooth adjustment

of machines position.

D
B

6. New shaft bearing bedding bigger bearings lo1. Mulching shrubs and bushes (up to

8 cm)

2. Mowing slopes, embankment, ditches and channels

KbRP 160

205

52

289

160

140

KbRP 200

205

52

329

200

180

inst mechanical damages

7. Hydraulic control as standard
of + 90- 60

1. These mowers feature wide range of operation

9. Internal shield of cutterbar is made of HARDOX

in horizontal (up to 170 cm), which enables passing

steel - improved lifespan and wear protection

Owing to use of pantograph it is perfect for

ging tractors trajectory

heavy duty works

2. Possibility of mounting on both tractors side as

11. Mower is mounted on standard tractors 3-point

well as its rear

linkage

3. New cutterbar of thick-walled tube with diame-

12. Perfect ground following for optimal mowing

ter

quality

168 mm

cated inside linkage frame to protects them aga-

8. Possibility of mowing surfaces with inclination

by obstacles (e.g. road signs) with no need of chan-

Type

4. Mechanical safety device as standard

13. Solid wide-angle PTO shaft with overrunning

5.

clutch

on pantograph meet standards of both municpal service companies as well as individual farmers offering services of mowing
road shoulders, slopes, embankments, ditches and water channels.
bearings are placed inside lnkage frame, which protects them against
mechanical damage.

Type

Operating
width
[m]

Operating
output
[ha/h]

1,60

~ 1,00

2,00

~ 1,60

Hedge
trimming

Road
shoulder
mowin

Knives
[pcs.]

Cutting
shaft
diameter
[mm]

14
090

060

Tractor
power
[HP]*

PTO
[rpm]

Linkage
hitch Cat.

from 70
168

16

760
540

from 80

Weight
[kg]

II
825

* Note! Power values apply only to municipal works - few mowing occasions per year.

14

15

EXTENSION
ARMS
REAR

IN

TIO
VA
O
N

N!

KOLIbER 400 extension arm with

LAMA 120 [cm] mowing head

1. Low machines weight enables extension

arm to be mounted on a light tractor,
2. Innovative construction,
3. High mounted main boom enables safe
drive over mileage poles.

410

310

270

120

455

220

Control panel with electric control

PTO 1,000 rpm
on main cylinder
along with adjustable choke valve.

Machine
type

and distributor - solid and ef-

16

Transport position - visible

rear bumper with lights.

Operating
reach of arm
[m]
4,0
4,5

Tractor
power
[HP]

Control

PTO rpm*
[rpm]

55

link

540

* As an option: PTO 1,000 rpm and electric control on order

Min. tractors
weight
[kg]

Transport
width
[m]

Transport
height
[m]

Weight
[kg]

2 400

2,65

1,75

530

2 900

2,90

1,85

550

17

EXTENSION
ARM
REAR

For
hard to
reach

KWT Extension arm

is available in two versions -

1.

with range of 5.5 m and 6.5 m,

2. Own reliable hydraulics,

and is mounted on tractors rear

3. Mounting on tractors standard 3- point linkage Cat. II,

3-point linkage Cat. II. On con-

4. Hydraulic safety device as standard,

trast to KWT 550, KWT 650 has

3
2

5. Application of choke valves enables smooth and precise

adjustment of operating arm speed,

telescopic arm. Extension arm

6. Strenghtened construction of arms and links made of

is equipped with branded inde-

hard steel,

pendent hydraulics and cooler

7. Integrated temperature and oil gauges,

with 150-liter oil tank.

8. Wide range of operation up to 6.65 m ( KWT 650 with KW

140 head).

b
Head

E
D
F

Hydraulic pump - hydraulic engine assembly has

installed to protect hydraulics
from overaheating.

with integral impurity gauge, installed in hydraulics

protect engine against damage.

18

340

110

640

290

190

570

450

340

130

640

290

190

580

450

350

150

650

290

190

580

450

350

120

650

290

190

660

530

430

110

720

300

190

660

530

430

130

720

300

190

675

540

440

150

730

300

190

670

540

440

150

730

300

190

Type

on lifting cylinder protects the arm from

falling even if hydraulic hose is
broken.

B
440

protects
machine against damage - in
the event of driving onto an obstacle extension arm is retracted.

A
570

As standard, arm control is possible owing to

from tractors cabin equipped with a handle and a joystick.

As an option, installation of
electric control is possible.

Operating range
Tractors weight
of arm
[kg]
[m]
5,70

4000

6,50

4500

PTO rpm
[rpm]*

Control

Transport
width/height/length
[m]

Weight
[kg]
1 320
1 400

540

link

3,5 / 1,95 / 0,95

5,80

3 700

1 250

6,70

4 000

1 320

* As an option: PTO 1,000 rpm and electric control on order

19

EXTENSION
ARMS
REAR

IN

TIO
VA
O
N

N!

of operation

Reach

[cm]

900

690

660

120

960

520

CAMEL 900
extension arm with LAMA 120 [cm]
mowing head

stem with an optional

multi-joystick.

Transport positions:

(Lama 120 head)

operating arm speed, owing to choke

valves

Machine type

strengthening links
Optionally:

Operating
reach [m]

Control

PTO rpm*
[rpm]

Transport
width [m]

Transport
width [m]

Transport
height [m]

Weight
[kg]

9,0

link

540

6 500

2,25

4,0

1370

PTO shaft rpm - 1000 rpm

Electrical control

Proportional control system

21

OPERATING
FITTINGS

OPERATING
FITTINGS

Mowing head is designed for grass trimming. It features low weight to considerably improve operation comfort.

Designed for cleaning ditches of sludge,

plants and blanket sand.

Type
Working width [m]
Knives [pcs.]

1,20

1,40

20

24

Required pump output

[L/min.]

Quick and simple replacement of mohave to do is to unscrew 6 bolts and

screw them back again.

210

210

Weight [kg]

185

205

Type

KW 125

Working width [m]

Knives [pcs.]

1,10

1,25

1,40

10

10

12

Required pump
output [L/min.]

Designed for washing and cleaning such

posts, road lighting, vehicle guardrails.

210

210

210

Weight [kg]

265

305

330

Type
Working width [m]
Nominal pressure [MPa]
Required pump delivery [L/min]
Drive type
Number of washing brushes [pcs.]
Weight [kg]

1,00

22

Hydraulic pressure [bar]

210
hydraulic

Perfect for both vertical and horizontal trimming of branches, bushes and hedges.

225

Type
Operating width [m]

1,50

2,00

Thickness of cut
branches max [mm]

100

100

45-60

45-60

Required pump output

[L/min]
Hydraulic pressure [bar]
Weight [kg]

shoulders to provide proper drainage from

road into ditch.

160
200

240

Type
1,10

20

Rotors diameter [mm]

420

40

Required pump output

[L/min]

70 -100

hydraulic
2
160

Designed for grinding trunks after cut down

Type

Weight [kg]

80-100

Weight [kg]

trees.

3-point linkage category

Operating width [m]

A 1000 l tank cooperating with Road sign washer Roller 1000.

Capacity [l]

80 cm

Required pump output

[L/min.]

Drive and control

90 - 100

Hydraulic
pressure [bar]

Operating width [max]

Knives [pcs.]

90 - 100

Hydraulic pressure [bar]

Type

1000
II
170

Following wheel

Yes

Hydraulic pressure [bar]

210

Weight [kg]

255

Type
L / H / W [cm]

60 / 47 / 50

Hydraulic pressure [bar]

210

Required pump output

[L/min]

70-100

Grinding wheel [mm]

370 x 12

Tooth count on wheel [pcs.]

16

Weight [kg]

90

23

SELF - COLLECTING
FLAIL MOWER WITH
CONTAINER

Strong and durable construction of

mower guaran-

tees long lasting and defect free operation related to maintenance of municipal infrastructure. It has 1.5 m3 container,
which is emptied with use of two cylinders tractors hydraulics (with no need of operator leaving tractor). For easier and
more comfortable operation of cutterbar, the mower is equipped with access panel.
Thanks to lowering container for mowed grass
cabin. Has 1.2 m3 container which is emptied with use of
tractors hydraulics.
allows long lasting and defect free operation related
to maintenance of municipal infrastructure. Has container with

1. Strong and durable construction

2. Hydraulics allows emptying collected material from container
3. Cutterbars shell is made of HARDOX hard wearing steel
4.
height
5.
de, which protects them from damaging
6. Mowing and collecting grass at the same time on uncultivated terrain
7. Mowing shrubs, bushes and collecting leaves in autumn
season

capacity of 1.4 m3. The mowers main advantage is possibility of

emptying the container directly onto a trailer up to 2m.

8. Standard PTO shaft

9. Adjustable mowing height
High unload up to 2 m (EMU 160 Up)
Operating
output
[ha/h]

Knives
[pcs]

Container
volume
[m3]

Cutting
shaft
diameter
[mm]

Tractor
power
[HP]*

PTO
[rpm]

3-point
linkage
Cat.

1,50
1,60

~ 1,00

14

1,20
1,40

SaMASZ Sp. z o.o.

tel. +48 85 664 70 31
fax. +48 85 664 70 41
email: [email protected]

ul. Trawiasta 15
Poland
www.samasz.com

168

60

540

II

Dimensions
w/l/h
[cm]

Weight
[kg]

196 / 125 / 190

735

196 / 150 / 190

710

196 / 165 / 190

905

Edition 1 / 2013 / 32

Type

Operating
width
[m]