www.specialmetals.
com
Nickel ..........................................................................34.0-37.0
Chromium....................................................................17.0-20.0
Iron ...............................................................................Balance*
Carbon ........................................................................0.08 max.
Silicon..........................................................................0.75-1.50
Manganese ...................................................................2.0 max.
Phosphorus ..............................................................0.030 max.
Sulfur ........................................................................0.030 max.
*Reference to the balance of a composition does not guarantee this
is exclusively of the element mentioned but that it predominates and
others are present only in minimal quantities.
Publication Number SMC-023
Copyright Special Metals Corporation, 2004 (Sept 04)
Physical Properties
Density, lb/in3 .....................................................................0.292
g/cm3 ......................................................................8.08
Melting Range, F .....................................................2520-2590
C .....................................................1380-1420
Specific Heat (32-212F), BtulbF....................................0.11
(0-100C), J/kgC ........................................460
Poissons Ratio at 70F (20C) ..........................................0.340
Permeability at 70F (20C) & 200 oersteds (15.9 kA/m) ....1.02
INCOLOY and INCONEL are trademarks of the
Special Metals Corporation group of companies.
The data contained in this publication is for informational purposes only and
may be revised at any time without prior notice. The data is believed to be
accurate and reliable, but Special Metals makes no representation or warranty of
any kind (express or implied) and assumes no liability with respect to the
accuracy or completeness of the information contained herein. Although the
data is believed to be representative of the product, the actual characteristics or
performance of the product may vary from what is shown in this publication.
Nothing contained in this publication should be construed as guaranteeing the
product for a particular use or application.
COE, in/in/Fx10-6
10.0
9.0
8.0
7.0
200
400
600
800
1000
1200
Temperature, F
Coefficient of expansion data.
1400
1600
1800
2000
INCOLOY alloy 330
Limiting Chemical Composition, %
INCOLOY alloy 330 (UNS N08330/W. Nr. 1.4886) is
an austenitic alloy with good high-temperature strength
and corrosion resistance. It has a solid solution
composition and is not hardenable by heat treatment. Its
high nickel and chromium provide good resistance to
oxidation and carburization. Its oxidation resistance is
enhanced by the silicon content.
The alloys strength and oxidation resistance at
elevated temperatures make it a useful material for
industrial heating furnaces; for muffles, retorts,
conveyor systems, baskets and boxes, and various
fixtures.
INCOLOY alloy 330
Thermal and Electrical Properties
Thermal
Conductivity
Temperature
F
75
400
800
1200
1600
1800
Btu-in/ft2-h-F
24
204
427
649
871
982
86
108
134
162
198
216
W/m-C
Modulus of Elasticity
Electrical
Resistivity
ohm-circ mil/ft
12.4
15.6
19.3
23.4
28.6
31.2
Temperature
-m
612
649
688
721
744
749
1.017
1.079
1.144
1.199
1.237
1.245
Tensile Modulus
3
10 ksi
GPa
70
1600
1800
20
870
980
28.5
19.5
18.0
197
134
124
Room Temperature Mechanical
Properties
Yield Strength
(0.2% Offset)
Tensile Strength
Form and Condition
Plate, hot-rolled & annealed
Sheet, cold-rolled & annealed
Rod, hot-finished & annealed
Elongation
ksi
MPa
ksi
MPa
80-85
80-90
80-90
552-586
552-621
552-621
30-43
32-42
35-45
207-296
221-290
241-310
40-45
35-45
38-45
Values are composites for various product sizes and are not suitable for specification purposes.
Impact Strength
Test Temperature
Charpy V-Notch Impact Strength
Material Condition
Annealed
Exposed to 1400F (760C)
for 1000 h
ft-lbf
75
1400
75
1400
25
760
25
760
>240
167
96
130
>325
226
130
176
INCOLOY alloy 330
High Temperature Mechanical Properties
100
Temperature, C
400
600
200
800
1000
600
Tensile Strength
500
60
400
Elongation
300
40
Stress, MPa
Stress, ksi & Elongation, %
80
200
Yield Strength
(0.2% Offset)
20
100
0
Tensile Properties
of Annealed Material
200
400 600
0
800 1000 1200 1400 1600 1800 2000
Temperature, F
100
80
Hardness, Rb
60
40
20
40
Hardness at
Elevated Temperature
200
400
600
800
1000
1200
1400
1600
1800
Temperature, F
INCOLOY alloy 330
High Temperature Mechanical Properties (continued)
Stress, ksi
10
0.1
1300
1400
1500
1600
1700
1800
1900
Temperature, F
Stress to produce rupture in 10,000 hours (Mill Annealed 1120C/2050F)
2000
2100
2200
INCOLOY alloy 330
High Temperature Mechanical Properties (continued)
10
Solution Treated 1204C (2200F)
Stress, ksi
Mill Annealed 1120C (2050F)
1
0.1
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
Temperature, F
Stress to produce 0.0001%/hr secondary creep rate
INCOLOY alloy 330
Corrosion Resistance
INCOLOY alloy 330 offers a high level of corrosion resistance, particularly to oxidation, carburization and nitridation. In
aqueous environments, the alloys chromium content provides resistance to oxidizing conditions while its nickel content
imparts resistance to reducing conditions. The high nickel also gives INCOLOY alloy 330 good resistance to chloride-ion
stress-corrosion cracking.
+50
Mass change, mg/cm2
Mass change, mg/cm2
+5
Ammonia
Nitrogen
-5
-10
H2-1% CH4
+40
+30
+20
+10
0
500
1000
Exposure time, h
1500
H2-5.5% CH4-4.5% CO2
500
1000
1500
2000
2500
3000
Exposure time, h
Mass change in ammonia and nitrogen at 2000F (1093C).
Mass change H2-5.5% CH4-4.5% CO2 and H2-1% CH4 at 1832F
(1000C).
Resistance to Oxidation (non-adjusted laboratory air)
Mass Change (mg/cm2) in
Temperature
F
200 h
500 h
1000 h
1600
1800
2000
871
982
1093
+0.24
+1.58
+0.14
-0.10
+1.51
-0.39
-0.37
-0.44
-43.48
1500 h
-0.44
-1.76
2000 h
-0.89
-3.32
Laboratory test results in a range of media
Environment, Temperature & Time
Air-2% SO2-5% H2O 700C (1292F), 1000 h
Air-2% SO2-5% H2O 850C (1562F), 1000 h
Air-2% SO2-5% H2O 1000C (1832F), 1000 h
Air-5% H2O Vapor Isothermal 1000C (1832F), 1000 h
Air-10% H2O, 2 h cycles 1093C (2000F), 102 h
Air-10% H2O, 2 h cycles 982C (1800F), 102 h
Air-10% H2O, 2 h cycles 816C (1500F), 102 h
Air-5% H2O Vapor Isothermal 1177C (2150F), 1000 h
N2-5% H2 Isothermal 1177C (2150F), 1000 h
Mass Change (mg/cm2) in
Undescaled
+0.27
-1.23
-2.03
+2.49
-26.49
-0.35
+0.08
-180.5
2.81
Descaled
-0.15
-3.20
-7.35
-7.69
-34.28
-2.91
-0.11
Metal Loss
Max. Attack
microns
microns
0.00
27.94
0.00
254
2.54
55.88
236.2
78.74
0.00
371
256
INCOLOY alloy 330
Welding
INCOLOY alloy 330 is weldable by conventional processes.
Shielded-metal-arc welding should be done with INCOWELD A welding electrode; gas-shielded-arc welding with
INCONEL filler metal 82. Acceptable welds have been
made in relatively heavy sections with these welding
products. For additional strength and corrosion resistance up
to 2100F (1150C), INCONEL filler metal 617 and
INCONEL welding electrode 117 may be used.
Fabrication
INCOLOY alloy 330 is readily hot- or cold-formed using
standard procedures for stainless steels and nickel alloys.
The range for hot forming is 1750 to 2100F (954 to
1149C).
Machining
Machining of INCOLOY alloy 330 requires more power
than similar operations on mild steel and should be
performed by techniques that minimize work hardening.
Available Products and Specifications
INCOLOY alloy 330 is designated as UNS N08330 and W. Nr. 1.4886. Standard product forms include tube, sheet, strip,
plate, round bar, forging stock, hexagon, wire and wire rod.
Bars and shapes - ASTM B 511, ASME SB 511
Billets and bars - ASTM B 512, ASME SB 512
Pipe and tube - ASTM B 535/ASME SB 535, ASTM B 546/ASME SB 546, ASTM B 710/ASME SB 710, ASTM B
739/ASME SB 739, ASTM B 829/ASME SB 829
Plate. sheet and strip - ASTM B 536, ASME SB 536, SAE AMS 5592
Bars, wire, forgings and rings - SAE AMS 5716
Other - ASTM B 366/ASME SB 366
www.specialmetals.com
U.S.A.
France
Affiliated Companies
Special Metals Services SA
17 Rue des Frres Lumire
69680 Chassieu (Lyon)
Phone
+33 (0) 4 72 47 46 46
Fax
+33 (0) 4 72 47 46 59
Special Metals Welding
Products
Special Metals Corporation
Billet, rod & bar, flat
& tubular products
3200 Riverside Drive
Huntington, WV 25705-1771
Phone
+1 (304) 526-5100
+1 (800) 334-4626
Fax
+1 (304) 526-5643
Billet & bar products
4317 Middle Settlement Road
New Hartford, NY 13413-5392
Phone
+1 (315) 798-2900
+1 (800) 334-8351
Fax
+1 (315)798-2016
Atomized powder products
100 Industry Lane
Princeton, KY 42445
Phone
+1 (270) 365-9551
Fax
+1 (270) 365-5910
Shape Memory Alloys
4317 Middle Settlement Road
New Hartford, NY 13413-5392
Phone
+1 (315) 798-2939
Fax
+1 (315) 798-6860
United Kingdom
Special Metals Wiggin Ltd.
Holmer Road
Hereford HR4 9SL
Phone
+44 (0) 1432 382200
Fax
+44 (0) 1432 264030
Germany
Special Metals Deutschland Ltd.
Postfach 20 04 09
40102 Dsseldorf
Phone
+49 (0) 211 38 63 40
Fax
+49 (0) 211 37 98 64
Hong Kong
Special Metals Pacific Pte. Ltd.
Unit A, 17th Floor, On Hing Bldg
1 On Hing Terrace
Central, Hong Kong
Phone
+852 2439 9336
Fax
+852 2530 4511
Canada House
Bidavon Industrial Estate
Waterloo Road
Bidford-On-Avon
Warwickshire B50 4JN, U.K.
Phone
+44 (0) 1789 491780
Fax
+44 (0) 1789 491781
Controlled Products Group
590 Seaman Street, Stoney Creek
Ontario L8E 4H1, Canada
Phone
+1 (905) 643-6555
Fax
+1 (905) 643-6614
A-1 Wire Tech, Inc.
India
Special Metals Services Ltd.
No. 60, First Main Road, First
Block
Vasantha Vallabha Nagar
Subramanyapura Post
Bangalore 560 061
Phone
+91 (0) 80 2666 9159
Fax
+91 (0) 80 2666 8918
Italy
Special Metals Wire Products
Holmer Road
Hereford HR4 9SL
Phone
+44 (0) 1432 382556
Fax
+44 (0) 1432 352984
Special Metals Services SpA
Via Assunta 59
20054 Nova Milanese (MI)
Phone
+390 362 4941
Fax
+390 362 494224
China
The Netherlands
Special Metals Pacific Pte. Ltd.
Room 1802, Plaza 66
1266 West Nanjing Road
Shanghai 200040
Phone
+86 21 3229 0011
Fax
+86 21 6288 1811
Special Metals Service BV
Postbus 8681
3009 AR Rotterdam
Phone
+31 (0) 10 451 44 55
Fax
+31 (0) 10 450 05 39
Singapore
Special Metals Pacific Pte. Ltd.
Room 910, Ke Lun Mansion
12A Guanghua Road
Chaoyang District
Beijing 100020
Phone
+86 10 6581 8396
Fax
+86 10 6581 8381
1401 Burris Road
Newton, NC 28658, U.S.A.
Phone
+1 (828) 465-0352
+1 (800) 624-3411
Fax
+1 (828) 464-8993
Special Metals Pacific Pte. Ltd.
24 Raffles Place
#27-04 Clifford Centre
Singapore 048621
Phone
+65 6532 3823
Fax
+65 6532 3621
A Special Metals Company
4550 Kishwaukee Street
Rockford, IL 61109, U.S.A.
Phone
+1 (815) 226-0477
+1 (800) 426-6380
Fax
+1 (815) 226-0537
Rescal SA
A Special Metals Company
200 Rue de la Couronne des Prs
78681 Epne Cdex, France
Phone
+33 (0) 1 30 90 04 00
Fax
+33 (0) 1 30 90 02 11
DAIDO-SPECIAL METALS
Ltd.
A Joint Venture Company
Daido Shinagawa Building
6-35, Kohnan 1-chome
Minato-ku, Tokyo 108-0057, Japan
Phone
+81 (0) 3 5495 7237
Fax
+81 (0) 3 5495 1853
