Flatpack2 48/4000 Dual
Rectifier Module
Versatile and powerful solution for any application
The combination of cost-effective design, power density and
reliability makes the Flatpack2 a product family that truly stands
outs and provides unparalleled network availability. The versatility
of the Flatpack2 rectifier means that it can be used in a wide
variety of 48VDC and 24VDC applications across the globe.
Applications
Key Features
Wireless, fiber and fixed line communication
Todays communications demand state of the art, cost
effective and compact DC power systems. Flatpack2
delivers an industry leading power density of 22W/in3 and
superb reliability at lowest lifetime cost
Highest efficiency in minimum space
Resonant topology makes the module efficiency industry
leading and contributes to the rectifiers ultra compact
dimensions.
Digital controllers
Primary and secondary controls are digitalized, enabling
excellent monitoring and regulation characteristics. Thus,
the number of component has been reduced by 40% - for
highly reliable, long life, trouble free DC power systems.
Heat management
Front-to-back air flow with chassis-integrated heat sinks
gives the module the most suitable working environment
and no limitations in the scalability of the desired system
solution.
Unique connection
A true plug-and-play connection system: time-to-install and
cost-reducing solution.
Global approvals
Flatpack2 is CE marked, UL recognized for worldwide
installation.
Broadband and network access
Increasing network speed demands flexible and expandable
DC power solutions. The Flatpack2 rectifiers are your key
building blocks for future needs.
Small and large
Due to the high power density, cost competitive design and
a highly flexible system communication interface, Flatpack2
rectifiers are used in system solutions from 5kW to 96kW.
Product Description
The Flatpack2 is a battery charger and rectifier for standalone use or for working in parallel as part of a DC power
system controlled and monitored by the Smartpack.
Flatpack2 is optimized for a wide range of system sizes.
Digital communication over CAN bus with Smartpack
simplifies system design and enhances flexibility.
Realization of Flatpack2 systems is possible by fitting 2
rectifiers across 19 shelf.
See reverse side for specifications
www.eltekvalere.com
Flatpack2 48/4000 Dual
Additional Technical Specifications
AC Input
Other Specifications
Voltage
85-300 VAC (Nominal 185 275 VAC)
Efficiency
Typical 92%, min. 91% at 40-90% load
Frequency
45 to 66Hz
Isolation
Maximum Current
25 Arms maximum at nominal input
and full load
3.0 KVAC input and output
1.5 KVAC input earth
0.5 KVDC output earth
Power Factor
> 0.99 at 20% load or more
Alarms:
Input Protection
o Varistors for transient protection
o Mains fuse in both lines
o Disconnect above 300 VAC
o
o
o
o
o
o
o
Warnings:
o
o
o
o
Visual
indications
o Green LED: ON, no faults
o Red LED: rectifier failure
o Yellow LED : rectifier warning
Operating
temp
-40 to +75C (-40 to +158F), derating
above +45C (+113F)
Storage temp
-40 to +85C (-40 to +185F)
4 fans (front to back airflow)
DC Output
Voltage
53.5 VDC (adj. range: 43.5-57.6 VDC)
Output Power
4000 W at nominal input
Maximum Current
74.8 Amps at 53.5 VDC and nominal
input
Current Sharing
3% of maximum current from 10%
to 100% load
Static voltage
regulation
0.5% from 10% to 100% load
Low mains shutdown
High temperature shutdown
Rectifier Failure
Overvoltage shutdown on output
Fan failure, one or two fans.
Low voltage alarm at 43.5V
CAN bus failure
Low temperature shutdown
Rectifier in power derate mode
Remote battery current limit activated
Input voltage out of range, flashing at
overvoltage
o Loss of CAN communication with
control unit, stand alone mode
Dynamic voltage
regulation
5.0% for 10-90% or 90-10% load
variation, regulation time < 50ms
Cooling
Fan Speed
Temperature and current regulated
Hold up time
> 20ms; output voltage > 43.5 VDC
at 3000W load
MTBF
> 150, 000 hours Telcordia SR-332 Issue I,
method III (a) (Tambient : 25C)
Ripple and Noise
o < 100 mV peak to peak,
o 30 MHz bandwith
o < 0.96 mV rms psophometric
Acoustic
Noise
< 55dBA at nominal input and full load
(Tambient < 30C)
Output Protection
Humidity
o
o
o
o
Operating: 5% to 95% RH non-condensing
Storage: 0% to 99% RH non-condensing
Dimensions
218 x 41.5 x 327mm (wxhxd)
(8.5 x 1.69 x 13)
Weight
3.8 kg (8.4lbs)
Overvoltage shutdown
Blocking diode
Short circuit proof
High temperature protection
Applicable Standards
Electrical safety
IEC 60950-1
UL 60950-1
CSA 22.2
EMC
ETSI EN 300 386 V.1.3.2 (telecommunication network)
EN 61000-6-1 (immunity, light industry)
EN 61000-6-2 (immunity, industry)
EN 61000-6-3 (emission, light industry)
EN 61000-6-4 (emission, industry)
Mains Harmonics
EN 61000-3-2
Environment
ETSI EN 300 019-2 (-1, -2, -3)
ETSI EN 300 132-2
RoHS compliant
Specifications are subject to change without notice
241115.500.DS3 v3
Ordering Information
Part no.
Description
241115.500 Flatpack2 48/4000 Dual
www.eltekvalere.com
Headquarters:
Eltek Valere
1303 E. Arapaho Rd, Richardson, TX. 75081, USA
Phone: +1 (469) 330-9100 Fax: +1 (469) 330-9101
Eltek Valere
Grterudv. 8, PB 2340 Strms, 3003 Drammen, Norway
Phone: +47 32 20 32 00 Fax: +47 32 20 32 10
