Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
806 960
X
65
0 8
set by hand or by optional RCU (Remote Control Unit)
XPol Panel 806960 65 17.5dBi 08T
800 10305
Type No.
Frequency range
Polarization
Average gain (dBi)
Tilt
806 866 MHz
806960
824 894 MHz
+45, 45
+45, 45
+45, 45
16.8 ... 17 ... 16.7
0 ... 4 ... 8
16.9 ... 17.1 ... 16.9
0 ... 4 ... 8
17.2 ... 17.4 ... 17.1
0 ... 4 ... 8
880 960 MHz
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0
60
69
67
65
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 25 dB
Typically: > 10 dB
Vertical Pattern:
Half-power beam width
9.1
8.8
Electrical tilt
8.5
0 8, continuously adjustable
Sidelobe suppression for first 0 ... 2 ... 4 ... 8 T
0 ... 2 ... 4 ... 8 T
0 ... 2 ... 4 ... 8 T
sidelobe above main beam 17 ... 16 ... 15 ... 14 dB 17 ... 16 ... 15 ... 14 dB 20 ... 18 ... 17 ... 15 dB
Impedance
50
VSWR
< 1.5
Isolation, between ports
> 30 dB
Intermodulation IM3
< 150 dBc (2 x 43 dBm carrier)
Max. power per input
500 W (at 50 C ambient temperature)
880 960 MHz: +45/ 45 Polarization
122
65
8.5
dB
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0 8 electrical downtilt
824 894 MHz: +45/ 45 Polarization
130
806 960
45
806 960
+45
7-16
7-16
67
8.8
dB
dB
Input
0
0
Horizontal Pattern
Vertical Pattern
0 8 electrical downtilt
806 866 MHz: +45/ 45 Polarization
Connector position
Adjustment
mechanism
2 x 7-16 female
Rearside, pointing downwards
1x, Position bottom
continuously adjustable
Weight
936.3398
135
Wind load
69
9.1
dB
Max. wind velocity
10
10
dB
Subject to alteration.
Mechanical specifications
10
10
0
0
Horizontal Pattern
Internet: http://www.kathrein.de
Packing size
Height/width/depth
12,6 kg
Frontal:
Lateral:
Rearside:
400 N (at 150 km/h)
260 N (at 150 km/h)
890 N (at 150 km/h)
200 km/h
2536 x 292 x 192 mm
2254 / 259 / 99 mm
Vertical Pattern
0 8 electrical downtilt
800 10305
Page 1 of 3
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories
General Information
Type No.
Description
Remarks
Weight
approx.
Units per
antenna
738 546
1 clamp
Mast: 50 115 mm diameter
1.0 kg
850 10002
1 clamp
Mast: 110 220 mm diameter
2.7 kg
850 10003
1 clamp
Mast: 210 380 mm diameter
4.8 kg
737 977
1 downtilt kit
Downtilt angle: 0 9
2.8 kg
Accessories (order separately)
72
64
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
979
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
2324
Reflector screen: Weather-proof aluminum.
Fiberglass radome: The grey fiberglass radomes of these antennas
are very stable and extraordinarily stiff. They are resistant to ultraviolet
radiation and can also be painted to match their surroundings.
All screws and nuts: Stainless steel.
2284
Material:
2254
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Adjustment mechanism
with integrated scale
44
25
175
259
112
Kathrein antennas have passed environmental tests as recommended
in ETS 300 019-2-4. The homogenous design of Kathreins antenna
families use identical modules and materials. Extensive tests have been
performed on typical samples and modules.
99
Environmental tests:
Bottom view
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which
includes the static mechanical load imposed on an antenna by wind at maximum velocity.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by
oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground.
These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 3
800 10305
Internet: http://www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Subject to alteration.
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
936.3398
Please note:
General Instructions
for Adjustment Mechanism
Description of the adjustment mechanism (protective cap removed):
2
2
Adjustment wheel with twist-lock
function.
Downtilt spindle with integrated
scale.
Thread for fixing the protective
cap or the RCU (Remote Control
Unit).
Gearwheel for RCU power drive.
To set the downtilt angle exactly,
you must look horizontally at the
scale. The lower edge of the gearwheel must be used for alignment.
Manual adjustment procedure:
0 max.
max. 0
Remove the protective cap.
Set downtilt angle by rotating the
adjustment wheel.
Screw on the protective cap again.
936.3398
Subject to alteration.
Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:
For a description of RCU installation please refer to the respective data sheet.
Internet: http://www.kathrein.de
800 10305
Page 3 of 3
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
