Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 17
VA TECH HYDRO
PENSTOCKS & GATES
Water. Penstocks. Gates.
www.vatech-hydro.com
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 2
INNOVATION
AND EXPERIENCE
Decades of experience and a spirit of
innovation - a combination promising
success
VA TECH HYDRO is, with regard to
penstocks and gates, the legal successor
of the former companies
VOEST ALPINE /
VA TECH VOEST MCE
of Austria,
SULZER ESCHER WYSS/
SULZER HYDRO and
ACMV / HYDRO VEVEY,
both from Switzerland.
All the know-how and experience gained
in decades by these companies is now
available from one single source.
Within VA TECH HYDRO the center of
competence for penstocks and gates is in
its subsidiary in Linz, Austria, where the
fabrication of these products was already
launched in 1947.
To date, our international record lists some
770 hydropower plants worldwide
equipped with penstocks and gates from
VA TECH HYDRO.
Our design for hydraulic steel structures
guarantees state-of-the-art technology
and top quality.
The world over,
barrages, spillways, bottom
outlets, intake
structures and
locks are built
with our knowhow and stand
for save and reliable operation.
Time and again
we have also
proved our
competence in
the design,
fabrication and
installation of
penstocks.
Our program
in this field
covers exposed
penstocks, steel
tunnel linings,
bi-/trifurcators and manifold systems, pipe
bridges. With regard to penstock fabrication at site, VA TECH HYDRO is by far
market leader in this technology.
Permanent development to secure the
technological lead has always been given
top priority in VA TECH HYDRO. Needless
to say, our products are subject to the
most stringent international quality
standards.
A
d
v
L
p
p
n
k
t
l
I
b
w
n
V
B
p
G
S
l
d
v
L
p
p
n
k
t
l
I
b
w
n
V
B
p
G
S
l
-
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 3
Argentina - Australia - Austria - Bolivia - Brasilia - Cameroon - Canada - Chile - China - Colombia - Costa Rica - Ecuador - Egypt - El Salvador - Fidschi - Finland - Germany - Greece - Guatemala - Honduras
- India - Indonesia - Iraq - Iran - Ireland - Japan - Jugoslawia - Laos Lebanon - Luxembourg - Malawi - Malaysia - Mexico - Myanmar - Nepal WORLDWIDE
- Nigeria - Norway - Pakistan - Papua New Guinea - Peru - Philippines - Puerto Rico - Romania - South Africa - Spain - Sudan - Surinam - Taiwan SUCCESS
- Tanzania - Thailand - The Netherlands - Tunisia - Turkey - Uruguay - USA - Venezuela - Zaire - Zambia - Argentina - Australia - Austria - Bolivia - Brasilia - Cameroon - Canada - Chile - China
- Colombia - Costa Rica - Ecuador - Egypt - El Salvador - Fidschi - Finland - Germany - Greece - Guatemala - Honduras - India - Indonesia countries,
spread over
all conIraqIn-79Iran
- Ireland
- Japan
- Jugoslawia - Laos - Lebanon - Luxemtinents, hydro plants fitted with penbourg
- Malawi - Malaysia - Mexico - Myanmar - Nepal - Nigeria - Norstocks and gates by VA TECH HYDRO
wayare- working
Pakistan
- Papua New Guinea - Peru - Philippines - Puerto Rico
to full satisfaction
- Romania - South Africa - Spain - Sudan - Surinam - Taiwan - Tanzania One
- Thailand
TheinNetherlands
- Tunisia - Turkey - Uruguay - USA of the principal demands
our business
is
being
there:
close
to
the
market,
Venezuela - Zaire - Zambia - Argentina - Australia - Austria - Bolivia close to ourCameroon
clients. In 25 overseas
counBrasilia
- Canada
- Chile - China - Colombia - Costa Rica
tries
VA
TECH
HYDRO
holds
own
- Ecuador - Egypt - El Salvador - Fidschi - Finland - Germany - Greece
subsidiaries and sales offices.
- Guatemala
- Honduras - India - Indonesia - Iraq - Iran - Ireland - JapanAssisting
- Jugoslawia
- Laos - Lebanon - Luxembourg - Malawi - Malaysia
of customers and their
- Mexico
Myanmar
- Nepal - Nigeria - Norway - Pakistan - Papua New
engineers in the
selection of optimized
Guinea
- Peru -andPhilippines
- Puerto Rico - Romania - South Africa project configuration
project
financing
is
one
of
our
main
tasks.
Spain - Sudan - Surinam - Taiwan - Tanzania - Thailand - The NetherGiving
and elaborating
cost
lands
- advice
Tunisia
- Turkey
- Uruguay - USA - Venezuela - Zaire - Zambia
budgets
are
part
of
our
routine
service,
- Argentina - Australia - Austria - Bolivia - Brasilia - Cameroon - Canaare greatly appreciated by
da -and
Chile
- China - Colombia - Costa Rica - Ecuador - Egypt - El Salthe customers.
vador - Fidschi - Finland - Germany - Greece - Guatemala - Honduras
Reference Plants
- India
- Indonesia
- Iraq - Iran - Ireland770
- Penstock
Japan &- Gate
Jugoslawia
- Laos The todays
development in the
Global
Distribution
Lebanon
- Luxembourg
- Malawi - Malaysia - Mexico - Myanmar - Neenergy sector
calls more and more
for
"Turnkey
Contractors"
and
pal - Nigeria - Norway - Pakistan - Papua New
Guinea - Peru - Philip475
"Package"
solutions.VA
TECH
HYDRO
pines - Puerto Rico - Romania - South Africa - Spain - Sudan - Surithe very few
who - Thailand - The Netherlands - Tunisia - Turnamis among
- Taiwan
- companies
Tanzania
116
offer the complete "Water to Wire"
key can
Uruguay
USA
Venezuela
Zaire
Zambia
Argentina
- Auspackage, including penstocks, gates,
10
127
tralia
- Austria - Bolivia - Brasilia - Cameroon - Canada - Chile - China
water turbines, generators, transformers,
- Colombia
- Costa
Rica
- Ecuador - Egypt - El Salvador
- Fidschi - Fin42
transmission lines
and the entire
balance
Asia
Europe
America
Africa
Australia/Oceania
landof -plant.
Germany - Greece - Guatemala - Honduras - India - Indonesia
Iraq - Iran - Ireland - Japan - Jugoslawia - Laos - Lebanon - Luxembourg - Malawi - Malaysia - Mexico - Myanmar - Nepal - Nigeria - Norway - Pakistan - Papua New Guinea - Peru - Philippines - Puerto Rico
- Romania - South Africa - Spain - Sudan - Surinam - Taiwan - Tanzania - Thailand - The Netherlands - Tunisia - Turkey- Uruguay - USA Venezuela - Zaire - Zambia - Argentina - Australia - Austria - Bolivia Brasilia - Cameroon - Canada - Chile - China - Colombia - Costa Rica
- Ecuador - Egypt - El Salvador - Fidschi - Finland - Germany - Greece
- Guatemala - Honduras - India - Indonesia - Iraq - Iran - Ireland - Japan - Jugoslawia - Laos - Lebanon - Luxembourg - Malawi - Malaysia
- Mexico - Myanmar - Nepal - Nigeria - Norway - Pakistan - Papua New
Guinea - Peru - Philippines - Puerto Rico - Romania
- South Africa 3
Spain - Sudan - Surinam - Taiwan - Tanzania - Thailand - The Netherlands - Tunisia - Turkey - Uruguay - USA - Venezuela - Zaire - Zambia
- Argentina - Australia - Austria - Bolivia - Brasilia - Cameroon - Cana-
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 4
RESEARCH AS
A DRIVING FORCE
Continuous investment in Research
and Development lies at the basis of
VA TECH HYDROs internationally
renowned technology
Hydraulic studies and model tests
The main criterion
for bifurcators is
optimum flow behaviour. To achieve
this, model tests
are performed in
our own research
labs, but also often
in cooperation with
university institutes,
to determine the
optimum hydraulic
shape, i.e. the one
showing the least
head losses.
On the basis of numerous model studies
for high-head gates and draft tube gates,
new insights into their hydrodynamic behaviour could be gained, enabling our designers to enhance the operational safety
of these structures accordingly.
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Beyond mere theory
For VA TECH HYDRO the verification of
computational methods plays an important role. Thus, for example, the calculated stresses in complex geometrical
Seite 5
critical buckling pressure of ring-stiffened
pipes, we were able
to achieve a major
contribution to this
aspect of science,
which resulted into an
improvement of components in terms of
economy and safety.
Optimized
manufacturing
technologies
structures such as bifurcators are routinely
checked by strain gauge measurements,
on the prototype or on a model.
The measured data are then used to
improve our stress analysis programs.
In another series of theoretical studies
and model tests to verify the theory of
In penstock construction, the right welding
technique is of particular importance.
The welding of steels
having a yield point of
up to 800 MPa poses
no problem for
VA TECH HYDRO,
even under the most
difficult conditions;
the relevant technology
was developed in the
companys own
welding laboratories.
VA TECH HYDRO is
also able to offer an
automated welding
process for in-situ
circumferential welds
on penstocks; this process (TIG Hot
Wire) has been specially adapted for this
application by our engineers and it can
be used for all material grades
including Q&T steels.
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 6
SAFETY THAT FLOWS
FROM EXPERIENCE
Safety and efficiency are the hallmarks
of VA TECH HYDROs mechanical
equipment for dams
Dams for hydropower purpose have to
meet extremely stringent safety requirements.
VA TECH HYDRO supplies spillway gates,
intake and outlet equipment, as well as
bottom outlet and diversion gates, fully
conforming to these demands.
The ability of VA TECH HYDRO to take
on even the most demanding orders is
proved, among others, by our high-head
gates; our references in this respect
include equipment designed for operating
heads of more than 190 mWC.
Numerous orders from the past few years
document the international reputation of
VA TECH HYDRO as a manufacturer of
high-head gates.
Our gates are equipped either with
hydraulic (servomotors) or mechanical
hoisting devices. Automated circuits and
remote-control systems offer safe operation while at the same time limiting operating and personnel costs to a minimum.
28.01.2002
13:13 Uhr
Seite 7
Highlights from High-Head Gates
Operating Head (mWC)
Penstocks & Gates16-Seiter
Fixed Wheel Gate
Sliding Gate
Radial Gate
Caterpillar Gate
Net Gate Area (m2)
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 8
RUNNING
TO PERFECTION
Sophisticated equipment to back up
operational safety and easy maintenance of run-of-the-river plants
The scope of supply of VA TECH HYDRO
includes also components for run-of-theriver plants, such as radial gates with/
without flap and double hook gates, intake
trashracks, trashrack raking machines,
stoplogs and draft tube gates.
Moreover, the programme caters to all
requirements of river locks.
Trash racks are designed to embody the
optimum hydraulic solution, while minimizing the risk of clogging by floating debris.
For instrumentation purposes, hardware by
internationally renowned manufacturers is
used, while the software necessary for
operation and control of these installations
comes from our own technical offices, and
is fully tested by our specialists in the
course of commissioning.
Low-maintenance rack raking machines by
VA TECH HYDRO are on standby to avoid
any hitch in the running of the plants.
In line with customer wishes, the cranes
necessary to move our hydraulic steel
structures are also designed and provided
by VA TECH HYDRO.
28.01.2002
13:13 Uhr
Seite 9
Highlights from Low-Head Gates
Wheel Gate
Gate Height (m)
Penstocks & Gates16-Seiter
Double Hook Gate
Radial Gate
Radial Gate w. Flap
Flap Gate
Gate Width (m)
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 10
HIGH STANDARDS IN
PENSTOCK CONSTRUCTION
13.26 m diameter 2,070 m head
6,210 P x D ... characteristic data sure
to impress
Depending on the actual project setting,
we design, manufacture and erect pressure
conduits both as exposed and embedded
penstocks, as pipe bridges or steel tunnel
linings.
We have also acquired long and competent experience in the design and construction of manifolds and bifurcations.
Besides the optimization of hydraulic conditions, the choice of suitable materials is
a major concern in penstock construction.
The know-how developed in more than
50 years in the production and processing
of high-strength steel benefits the engineers
at VA TECH HYDRO, and especially in the
penstock design department.
The employment of state-of-the-art and
thermomechanically rolled steels as well
as quenched and tempered steels enables
us to offer our customers attractive
solutions.
10
Many years experience in the treatment
of these materials, combined with the
permanent training of our welding staff,
guarantee maximum safety in operation.
In penstock construction VA TECH
HYDRO can exercise its strength in
engineering and project management to
full effect. Since more and more penstocks
are being manufactured directly at site,
professional management under the
supervision of VA TECH HYDROs
specialists is gaining increasing importance.
28.01.2002
13:13 Uhr
Seite 11
Highlights from Penstock References
Design Head (mWC)
Penstocks & Gates16-Seiter
Penstock
Penstock & Manifold
Manifold / Bifurcation
Internal Diameter D (m)
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 12
WORLD CLASS
IN SITE FABRICATION
Maximum utilization of local resources
- under our full responsibilty
The demand of know-how transfer as well
as making maximum use of local resources,
but also the cost factor, require the
increasing outplacement of activities to
the project countries.
The largest project in terms of volume was
the Mingtan pumped storage power station in Taiwan, involving 26,000 tonnes of
steel conduits and penstocks.
For the 3rd extension of the Tarbela Dam
in Pakistan not only the penstocks were
fabricated at site, but also, and this was
an absolute novelty, the bifurcations - the
largest unit having an inlet diameter of no
less than 13.26 m and a total weight of
800 tonnes.
VA TECH HYDRO started to fabricate
penstocks directly on site already some
30 years ago. A temporary field workshop
is set up to house all the necessary machinery for production and testing, so that
deliveries to site are limited to unmachined
and flat plates only.
Out of 310,000 tons of penstocks fabricated and erected by VA TECH HYDRO
resp. by its predecessor company
VA TECH VOEST MCE, some 151,000 tons
were fabricated directly on site. So far, site
fabrication for 37 contracts have been
successfully completed by this technology,
in 16 countries under most diverse and
adverse conditions of climate and terrain.
12
But no matter how large the share of
local supplies and services is, the overall
responsibility for the project lies with
VA TECH HYDRO.
28.01.2002
13:13 Uhr
Seite 13
Penstock Record (Total and Site Fabricated)
Cumulative Tons
Penstocks & Gates16-Seiter
Penstocks - Total
Site-Fabricated Penstocks
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 14
MEETING THE
CHALLENGE
First-class equipment takes rough
ground in its stride
Smaller components, pipes up to 10 tons,
are erected with mobile cableway systems,
especially in steep mountains or sites in
remote areas.
Climbing cranes and temporary erection
bridges are also among the not-so-quiteusual methods, all of them perfectly
mastered by VA TECH HYDRO.
Hydro power plants are often located in
areas where access is difficult; handling
heavy components provides an additional
challenge for erection crews.
Well-considered solutions and special
equipment help us to master the even
most difficult situations.
Specially developed pipe carriages take
large pipes from the field shop to the
place of erection.
It copes with units up to 80 tons and even
allows access into narrow tunnels.
The heaviest erection units in
VA TECH HYDRO history weighed
285 tons, also moved by purpose-built
equipment from our own source.
14
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 15
Penstocks & Gates16-Seiter
28.01.2002
13:13 Uhr
Seite 16
VA TECH HYDRO worldwide
VA TECH HYDRO
e-mail: [email protected]
Penzinger Strasse 76
A-1141 Vienna, Austria
Phone: (++43/1) 89 100 - 2963
Fax: (++43/1) 89 100 - 3821
www.vatech-hydro.com
Lunzerstrasse 78
A-4031 Linz, Austria
Phone: (++43/70) 6987 - 8805
Fax: (++43/70) 6980 - 8826
Escher-Wyss-Strasse 25
D-88212 Ravensburg, Germany
Phone: (++49/751) 83 - 2941
Fax: (++49/751) 83 - 3280
eHYD.LH.22.5000.L.D01
Set ups in Argentina, Austria, Australia, Brazil, Canada, Chile, China, Columbia, Egypt, France, Germany, Hungary, India, Indonesia, Iran, Italy,
Korea, Malaysia, Mexico, Norge, Peru, Philippines, Poland, South-Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey,
United Arab Emirates, United Kingdom, Ukraine, USA, Venezuela and Vietnam.
