Scribd
Upload
119 views6 pages

Bend Tutorial in Solidworks

The document provides 11 steps to generate a sheet metal part in SolidWorks: 1) Start in part mode and create a sketch on the top plane, 2) Make a sketch, 3) Exit the sketch and select the base flange/tab option, 4) Select the sketch and the base is generated, 5) Select the sketched bend option and bend the top face of the base along a drawn line, completing the sheet metal part generation.

Uploaded by

TalhaMahmood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
119 views6 pages

Bend Tutorial in Solidworks

The document provides 11 steps to generate a sheet metal part in SolidWorks: 1) Start in part mode and create a sketch on the top plane, 2) Make a sketch, 3) Exit the sketch and select the base flange/tab option, 4) Select the sketch and the base is generated, 5) Select the sketched bend option and bend the top face of the base along a drawn line, completing the sheet metal part generation.

Uploaded by

TalhaMahmood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

1.

Step 1
Start SolidWorks in part mode.

2. Step 2
Top plane>>Sketch.

3. Step 3
Make this sketch.

4. Step 4
Exit the sketch. Now click base flange/tab under sheet metal tab.

5. Step 5

Select the sketch and click OK.

6. Step 6
Now the base of the sheet metal has been generated.

7. Step 7
Under sheet metal tab select Sketched bend.

8. Step 8
Select the top face of the base.

9. Step 9
Draw a line across which the bend has to be done.

10.Step 10
Exit the sketch and select the fixed portion of the base.

11. Step 11
Click OK and the bend is generated.

You might also like