NEW
15ppm BILGE SEPARATOR
Conforming to Type Approval Standard MEPC 107(49)
Feature & Specifications
Exclusively for marine use.
Series: USH01
Treatment capability: 0.15 m3h
Exclusive pumpmotor is provided inside, so
the Separator system occupies no space.
The product accredited for type approval by
the Ministry of Land, Infrastructure and
Transport and in accordance with the EC
Marine Equipment Directive.
IMO MEPC.107(49)
Carried on board the ships of 340 G/T or
below.
Taiko Kikai Industries Co.,Ltd, which has already sent out three
series Oily Water Separators to the market, developed USH
series this time as a compilation of its technologies on the
machine, in response to eectuation of the resolution
MEPC.107(49) (applicable to ships for which the keels are laid
down on and after January 2005).
USH series is a state-of-the-art oily water separator with a
coalescer long in service life and high in performance, providing
remarkable capability of treating not only high-specic gravity
high-viscosity oils, but also emulsions containing surface
active agents or suspended solids that have been deemed it
impossible to treat with conventional coalescers.
In addition, USH series is a customer-satisfaction-oriented oily
water separator which has been developed with maintainability
in mind. The users can operate it without feeling any stress on
themselves even during bilge treatment work on a real ship
and become convinced of its prolonged stable performance.
Apart from other USH series (treatment capability: 0.25 to 5
m3h), USH01 has been developed for use on medium- or
small-sized ships. It has high performance for its small size.
In the USH-01 series Oily Water Separator, exclusive pump
motor has been provided inside for the convenience of use.
This allows reasonable use of the Separator in any limited
installation space.
USH-01
15ppm BILGE SEPARATOR
USH-01
Structure & Dimensions
USH-01
305
190
415
Mass at empty120kg
Mass at operation154kg
Power sourceAC100V500VADC24V10A
should be for costom-made
articles of product
CoatingMunsell symbol 7.5BG7/2
163
326
No.
280
230
178
138
CL
230
min.300
Maintenance space
140
The front
370
416
AA Arrowy view
515
Treated water outlet
min.800
Maintenance space
min.800
Disassembly space
175
260
10
14
1
2
12
Waste oil
Outlet
Ball valve
780
590
RC12
11 Return line
20
Oil drain cock
Water test cock
Automatic air
vent valve
Strainer
270Inlet
290Return
Rc12Union
Bilge inlet
163
11 Three-way valve
InstallationPiping Procedures
12 Pump
Siphon breaker
Be sure to exceed a value of
discharge resistance
1/2B
Treated water
discharge line
1
1
1
1
1
1
1
1
1
1
1
STAINLESS STEEL
SUS304
14 Nameplate
Standard Fittings
Water test cock
(Periodically check treated water conditions.)
Hopper
Oil drain cock
(Periodically discharge oil)
1/2B
Three-way valve (handle position)
In horizontal direction during normal
operation or while stopped; in vertical
direction during transfer of highconcentration oil to waste oil tank, or
during pump disassembly.
urce
er so
Pow
1/2B
1/2B
Within 2 to 3 m
Light draft
13 Motor
0.3 m or more
Q'ty
1
BRASS
C3602
BRASS
C3602
STAINLESS STEEL
SUS304
BRONZE
CAC
BRASS
C3602
BRONZE
CAC
BRONZE
CAC
Constant flow
10 valve
50
155
13
135
Pressure gauge
12
70
2
5
Material
MILD STEEL
Body
SS400
Transmitting AL ALLOY CASTING
converter
ADC12
AL ALLOY CASTING
Oil level
ADC12
detector
BRONZE
Solenoid valve CAC
Name
Automatic oil drain device
(solenoid valve, oil level detector,
transmitting converter)
Automatic air vent valve
Test cock
Drain plug
Pressure gauge and cock
Constant flow valve
Exclusive pump (avoid an empty
run), motor and V-pulley, V-belt
Strainer
1/2B
Standard Spare Parts
Sea water
Waste oil tank
Suction strainer
(clean periodically.)
Bilge tank
Automatic oil drain device spare
parts (fuse)
Packing
URLhttp://www.taiko-kk.com
Head Office &
Factory
Tokyo Branch
209-1 Shimotabuse,Tabuse-cho, Kumage-gun, Yamaguchi Pref. 742-1598 Japan
ROTARY
BLOWER
OILY WATER
SEPARATOR
4th floor, Suidobashi MS Building, 3-4-9 Misaki-cho, Chiyoda-ku, Tokyo 101-0061 Japan
TEL81-3-3221-8551 FAX81-3-3221-8555 E-mail: [email protected]
Osaka Branch
VACUUM
PUMP
TEL81-820-52-3114 FAX81-820-53-1001 E-mail: [email protected]
SEWAGE
TREATMENT
DEVICE
SCREW PUMP
8th floor, KC Building, 3-4-7 Kawara-machi, Chuo-ku, Osaka 541-0048 Japan
TEL81-6-6231-6241 FAX81-6-6222-3295 E-mail:
[email protected]GEAR PUMP
CENTRIFUGAL
PUMP
The dimensions and specifications of the products included in this catalogue may be subject to change without notice for purposes of improvement in their performance. 2005/MUTSUMI
