MEMB 123
MECHANICS 1: STATICS
SEM 2 2013/2014
Lecture 17
Chapter 5
Equilibrium of a rigid body
DR.GRACE PUA
OFFICE: BN-3-012
DEPARTMENT OF MECHANICAL ENGINEERING
COLLEGE OF ENGINEERING, UNITEN
Chapter Outline:
5.1
5.2
5.3
5.4
5.5
5.6
5.7
Conditions for rigid body equilibrium
Equilibrium in two dimensions
Free body diagrams
Equations of equilibrium
Two- and three-force members
Equilibrium in three dimensions
Free body diagrams
Equations of equilibrium
Constraints for a rigid body
5.5 Free-Body Diagrams
Support Reactions
As in the two-dimensional case:
A force is developed by a support
A couple moment is developed when rotation of the
attached member is prevented
The forces orientation is defined by the coordinate
angles , and
Table 5-2 Supports for rigid bodies subjected to 3D
force systems
Example 01
Several examples of objects along with their associated free-body
diagrams are shown. In all cases, the x, y and z axes are established
and the unknown reaction components are indicated in the positive
sense. The weight of the objects is neglected.
Solution
Solution
Solution
Bearings
Single Journal Bearing
Single thrust bearing
5.6 Equations of Equilibrium
Vector Equations of Equilibrium
For two conditions for equilibrium of a rigid body in vector form,
F = 0 MO = 0
Scalar Equations of Equilibrium
If all external forces and couple moments are expressed in
Cartesian vector form
F = Fxi + Fyj + Fzk = 0
MO = Mxi + Myj + Mzk = 0
Applications
Ball-and-socket joints and journal bearings are often used in
mechanical systems.
How can we determine the support reactions at these joints for a
given loading?
SUPPORT REACTIONS IN 3-D (Table 5-2)
A few examples are shown above. Other support
reactions are given in your text book (Table 5-2).
As a general rule, if a support prevents translation of a body in a
given direction, then a reaction force acting in the opposite
direction is developed on the body. Similarly, if rotation is
prevented, a couple moment is exerted on the body by the
support.
IMPORTANT NOTE
A single bearing or hinge can prevent rotation by providing
a resistive couple moment. However, it is usually preferred
to use two or more properly aligned bearings or hinges.
Thus, in these cases, only force reactions are generated and
there are no moment reactions created.
EXAMPLE
Given: The cable of the tower crane
is subjected to 840 N force.
A fixed base at A supports
the crane.
Find: Reactions at the fixed base
A.
a) Establish the x, y and z axes.
b) Draw a FBD of the crane.
c) Write the forces using Cartesian vector notation.
d) Apply the equations of equilibrium (vector version) to solve
for the unknown forces.
r BC = {12 i + 8 j 24 k} m
F [uBC ] N
= 840 [12 i +
8 j 24 k] / (122 + 82
= {360 i + 24 j 720 k} N
FA =
{AX i
+ AY j
+ AZ k } N
+ ( 242 ))
From Equation of Equilibrium, we get, F + FA = 0
{(360 + AX) i + (240 + AY) j + (-720 + AZ ) k} = 0
Solving each component equation (simultaneous eqn) yields :
AX = 360 N ,
AY = 240 N , and AZ = 720 N.
Sum the moments acting at point A.
M = MA +
rAC F = 0
MAX i + MAY j + MAZ k +
i
15
360
j
k
10
0 =0
240 -720
MAX i + MAY j + MAZ k - 7200 i + 10800 j = 0
MAX = 7200 N m, MAY = -10800 N m, and MAZ = 0
Note: For simpler problems, one can directly use three scalar moment
equations, MX = MY = MZ = 0
Example 02:
Given: A rod is supported by
a ball-and-socket joint at A,
a journal bearing at B and a
short link at C. Assume the
rod is properly aligned.
Find: The reactions at all
the supports for the loading
shown.
a) Draw a FBD of the rod.
b) Apply Scalar Equations of Equilibrium to solve for
the unknowns.
A FBD of the rod:
Solution
AZ
BZ
Ay
1 kN
AX
X
BX
2 kN
Applying scalar equations of equilibrium in appropriate order, we get
MY = 2 (0.2) FC ( 0.2) = 0 ;
F Y = AY + 1 = 0 ;
FC = 2 k N
AY = 1 k N
M Z = 2 (1.4) BX ( 0.8 ) = 0 ; BX = 3.5 kN
FC
PROBLEM (continued)
A FBD of the rod:
AZ
BZ
Y
Ay
1 kN
AX
BX
2 kN
FX = AX 3.5 + 2 = 0 ;
MX = 2 ( 0.4 ) + BZ ( 0.8) + 1 (0.2) = 0 ;
FZ = AZ + 0.75 2 = 0 ;
AX = 1.5 kN
BZ = 0.75 kN
AZ = 1.25 kN
FC
Thank you for your attentions!
