HEPA Aluminium Separator
Final or HEPA Filters H11 95%@0.3um H13 99.99%@0.3um H14 99.999%@0.3um
General Characteristics
High Efficiency Particulate Air (HEPA) Aluminium Separator
(Al-Sep) filters, also known as Absolute Filters for efficiencies more
than 99.97%@0.3um. The traditional HEPA Aluminium Separator
construction filters are used as final filters to collect most penetrating
particles sizes in the air filtration systems, air handling units of
non-directional cleanrooms and final filters to protect the terminal
modules in directional cleanrooms. They are used extensively in
industries such as pharmaceutical production, electronics, hospitals,
clean rooms, laboratories, exhaust systems, nuclear establishments,
injectable production, film production, and fall-out shelters.
+ HEPA Filtration with 95%@0.3um,
99.99%@0.3um and 99.999@0.3um efficiencies
+ Micro Fibreglass with Aluminium Separators
+ Aluminium, Particle Board Wood
or Stainless Steel Frame (HT models)
+ Extended Surface Media Area
+ Rubber gaskets at downstream of filters
+ HT model of high temperature up to 250C
Construction
Filter Media
The filter media is micro fibreglass paper which is water repellent and anti-fungicide. The
fibreglass media has graduated density coarse fibres on air in and finer fibres on the air out to
develop high dust holding capacity. High Capacity (HC) rated packed with more media area
is highly recommended for lower pressure drop, lower energy cost and longer filter lifespan.
Separators
The fibreglass paper is deep pleated with aluminum crimped spacers acting as separators.
Enclosing Frame
The filter media pack is enclosed with aluminium, galvanised steel or particle wood board
frame. High temperature models are enclosed with stainless steel frame. The standard frame
option is double-turned flange (DTF) or box C-styled (NH).
Sealant
Hotmelt or equivalent adhesive is applied to the filter pack to the enclosing frame.
Each filter is fitted with a one-jointed synthetic rubber seal downstream of filters.
Silicone is used as sealant and gasket for high temperature (HT) models.
IF
International
Filtration
HEPA Aluminium Separator
Model IF30, IF40, IF55, IF60
Filter Grade: G4, F5 , F6
Final or HEPA Filters H11 95%@0.3um H13 99.99%@0.3um H14 99.999%@0.3um
Specifications
Model
Description
Efficiency at 0.3um
Standard Capacity (SC)
High Capacity (HC)
S1BA
H4BA
H5BA
HEPA Al-Sep
HEPA Al-Sep
HEPA Al-Sep
95.0%@0.3um
99.99%@0.3um
99.999%@0.3um
SC
HC
SC
HC
SC
HC
3400*
3400*
1890
3400*
(2500 or
1.85m/s)
1890
3400*
250
200
250
333
(250)
280
370
Rated Airflow cmh 610x610x150mm
Standard cap at 1.4m/s
High Capacity at 1.25m/s
1700
1700
1000
1620
1000
1620
Inital Pressure Drop Pa for Depth 150mm
250
200
250
250
280
280
Rated Airflow cmh 610x610x292mm
Standard cap at 1.4m/s
* Rated Airflow at 2.5m/s
Inital Pressure Drop Pa for Depth 292mm
Filter Class to EN1822
H11
H13
H14
IES RP-CC-001.3
N.A
Type C
Type D
EN1822 MPPS Global/ Integral value
95.0%
99.95%
99.995%
PAO/ DOP/PSL @ 0.3um
97.0%
99.99%
99.999%
Performance data is based on IES RP-CC-001.3 and EN1822. Test method, data provided is for comparison and information
Test Report results of HEPA with the serial number will be affixed onto label on HEPA Filter.
Gasket of 5mm thickness are provided downstream of filters. Optional both sides gaskets can be requested.
Dimensions
Technical Data
Actual Size
LxWxD
Filter Media
Water-Repellant Micro Fibreglass Paper
Enclosing Frame
Aluminium (Al)
Option: Galvanised Steel (Gi), MDF (Wood),
Stainless Steel 304 (SS304)
Separator
Aluminium
Sealant
Polyurethane / Hotmelt
Continuous Operating Temperature
Relative Humidity
Recommended Final Pressure Drop
Maximum Final Pressure Drop
80C
90%
500 Pa
650 Pa
Initial Pressure Drop ( Pa )
500
450
99.99%, SC,
610x610x150mm"
350
Rated Air Flow
m3/h
Media Area
m2
Nett
Weight
Packing
per
carton
in mm
Standard Cap
0.78 m/s
High Cap
1.25 m/s
Standard Cap
0.78 m
High Cap
1.25 m/s
kg
305 x 305 x 150
305 x 610 x 150
610 x 610 x 150
1220 x 610 x 150
250
500
1000
2000
405
810
1620
3240
2.1
4.3
8.6
17.2
3.2
6.5
13.1
26.2
4.6
8.2
9.3
12.3
8
4
2
1
Actual Size
Standard Cap
1.4 m/s
High Cap
2.5 m/s
Standard Cap
1.4 m
High Cap
2.5 m/s
Nett
Weight
Per
carton
305 x 305 x 292
470
850
4.2
6.5
4.6
305 x 610 x 292
945
1700
8.5
13.0
8.2
610 x 610 x 292
1890
3400
17.0
26.1
9.3
Other sizes can be customised, rated airflow in proporational to face area of 610x610.
Gasket
Rubber
400
MPPS: Most Penetrating Particle Size
Standards for Reference
IES RP-CC-001.3 Type C PAO/P.S.L Testing 99.99% at 0.3um
1. EN1822-5 for Classes H12, H13 and H14
2. IES RP-CC-001.3 for TYPE A/B/C/D
Each single filter media roll used in production is systematically tested in accordance with standard EN 1822-3.
In accordance to Recommended Practice IES RP-CC-001, at the end of the production, individual filter element is tested by using
non-toxic aerosol of PAO/ polystrene latex spheres (PSL) challenge and leak scanned by using photometer. Filter Efficiencies or
penetrations are determined by measuring upstream and downstream concentration. For EN1822-4, the test is carried out with a
mono-dispersed Emery/ PSL aerosol to determine the local efficiency. The pressure loss is also determined.The filter test results are
recorded on labels and affixed onto the HEPA filter.
99.999% HC , 99.99%, SC,
610x610x292610x610x292mm
99.99%, HC,
610x610x150mm
99.999% HC ,
610x610x292
99.99%, HC,
610x610x292mm
300
250
200
High Temperature (HT) models up to 250C can be
requested. The filter comes with Stainless Steel 304
Frame with High Temperature Silicone as sealant and
gaskets
150
100
50
0
0
500 1000 1500 2000 2500 3000 3500 4000
Nominal Air flow ( cmh )
IF
International
Filtration
CLYDE-IFC (S) PTE LTD
9 Joo Koon Road Singapore 628973 Tel: +65 6785 0700 Fax: +65 6785 1011
Email: sales@clyde.sg http://www.clyde.sg
