SAFEMATIC Seal Water Control and Monitoring System
Safeunit
SAFEMATIC Safeunit
Complete Monitoring and Control Solution for Seals and Seal Water Systems
Installing the Safeunit seal water system will ensure
trouble free operation of process machinery in all
conditions and achieve the maximum life cycle profit of your
investment. Adjusting the seal water flow and pressure with
Safeunit will create the best possible operating environment
for seals and maximise the runnability of the process.
Save Seal Water
2 drops/second = 14 m3 / year
Safeunit seal water system dramatically
reduces water consumption by up to
80%. This means a considerable drop in
waste water load.
For example, with the water price of US
$0.50/m, the annual savings in a mill
with 300 pumps is US $300,000 (flow
reduction 4 l/min/pump).
Normal operation
2.5 l/min
2.5 l/min
Flow increases and
pressure decreases
2 l/min
6 l/min
4 l/min
Changes in the pre-set system values for flow and pressure
will indicate any possible problems in seals and system well
in advance. For automatic control, alarm sensors can be
used.
Safeunit system also detects seal water leakage in the
process resulting in extra heating and evaporation costs or
expensive quality problems such as dilution.
SAFEMATIC Safeunit
User Friendly, Compact Unit
Controls and monitors seal water flow and pressure
Detects and locates seal water line problems
Predicts seal and packing failures
Flow indicator and pressure gauge with memory pin
Reduces and pre-determines maximum seal water
Unique non-clog valves
consumption
Can be cleaned with equipment running. Alarm will
not go off with the new improved push-clean button
Available with optional electrical alarms and
LCS-leakage control system
Freeze resistant material is also available
Simplifies pump setup and service
Inductive low-flow alarm sensor (optional)
Pressure gauge with memory pin
Flow rate Indicator
Flow memory pin indicator
Improved push-clean button
Flow regulating valve
Pressure regulating valve
(for double seal applications)
Max. temperature 140F/60C
Max. pressure 360 psi(g)/25 bar(g). All rights reserved.
Mechanical Sealing Systems
Safeunit Options
Packing or single Seal Flush
Type SFP
Quench Seal
Type SFQ
Double Mechanical Seal
Type SFD
Safeunit type:
Type SFP
Type SFQ
Type SFD
Flow:
Standard Material:
Freeze Resistant Material:
0.75 gpm (3 l/min)
2 gpm (8 l/min)
4 gpm (15 l/min)
0.75 gpm (3 l/min)
2 gpm (8 l/min)
4 gpm (15 l/min)
Pressure area:
87 psi(g)/6 bar(g)
150 psi(g)/10 bar(g)
232 psi(g)/16 bar(g)
360 psi(g)/25 bar(g)
Complete hose assembly:
Yes
Seal connections:
NPT
R
1/8
1/2
1/4
Other
3/8
Alarm:
Mounting:
Bracket
AC-1 (20-250 VAC/DC)
DC-1 (10-36 VDC)
EX-1
Stand
SAFEMATIC is a registered trademark of John Crane
For your nearest John Crane facility, please contact one of the locations below.
North America
United States of America
Europe
United Kingdom
Latin America
Brazil
Middle East & Africa
United Arab Emirates
Asia Pacific
Singapore
1-800-SEALING
Tel: 1-847-967-2400
Fax: 1-847-967-3915
Tel: 44-1753-224000
Fax: 44-1753-224224
Tel: 55-11-3371-2500
Fax: 55-11-3371-2599
Tel: 971-481-27800
Fax: 971-488-62830
Tel: 65-6518-1800
Fax: 65-6518-1803
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to
their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without
prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. ISO 9001 and ISO
14001 Certified, details available on request.
2014 John Crane
Revised 11/14
[Link]
B-Safeunit/Eng
