Scribd
Upload
34 views1 page

MD II Assignment 3

This document contains three questions related to rolling contact bearings and hydrodynamic lubrication. Question 1 asks about classifications of rolling contact bearings, hydrodynamic lubrication, differences between rolling contact and sliding contact bearings, rated life, and static and dynamic load capacities. Question 2 discusses how factors like load, speed, temperature, and reliability influence rolling contact bearings and defines terms like Sommerfield number, coefficient of friction, and flow variable. Question 3 involves calculations for a hydrodynamically lubricated journal bearing operating at 800 rpm under a 9 KN radial load and selecting a suitable ball bearing for a given cyclic load profile with a required life of 10,000 hours and 93% probability of survival.

Uploaded by

Harshal Kolhe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
34 views1 page

MD II Assignment 3

This document contains three questions related to rolling contact bearings and hydrodynamic lubrication. Question 1 asks about classifications of rolling contact bearings, hydrodynamic lubrication, differences between rolling contact and sliding contact bearings, rated life, and static and dynamic load capacities. Question 2 discusses how factors like load, speed, temperature, and reliability influence rolling contact bearings and defines terms like Sommerfield number, coefficient of friction, and flow variable. Question 3 involves calculations for a hydrodynamically lubricated journal bearing operating at 800 rpm under a 9 KN radial load and selecting a suitable ball bearing for a given cyclic load profile with a required life of 10,000 hours and 93% probability of survival.

Uploaded by

Harshal Kolhe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Assignment No: 03

Q.1 (Twenty Marks)


i.
ii.
iii.
iv.
v.

Write classification of rolling contact bearing.


What do you meant by hydrodynamic lubrication
Compare rolling contact bearing and sliding contact bearing.
What is rated life of rolling contact bearing
What are static and dynamic load carrying capacity

Q.2 (Twenty Marks)


i.
ii

Explain how the following factors influence the rolling contact bearing
a) Load
b) Speed c)Temperature d)Reliability
Explain the significance of the following terms in bearing
a) sommerfield Number b)coefficient of friction c)Flow Variable

iii.

What are the various terms used in hydrodynamic journal bearing analysis and design?

Q.3 (Forty Marks)


i.

A 3600 Hydrodynamically lubricated full journal baring is subjected to radial load of 9


KN at 800 rpm having diameter of 75 mm. select suitable fit and with average clearance
find operating parameters like
a) Coefficient of Friction
b) Oil temperature rise
c) Inlet pressure
d) Oil quantity Flow
Check the working of bearing for minimum clearance and comment.

ii.

A ball bearing mounted on a 90 mm shaft operates on the following work cycle


No
Radial Load (KN)
Speed (RPM)
Duration in sec
1
3
720
3
2
7
1440
4
3
5
900
3
Select suitable bearing for a life of 10000 hours with 93% probability of survival.

You might also like