1100 Series 1104D-44TA
83 kW / 111 hp at 2200 rpm
With the success of their 1100 Series, single platform engines, Perkins have taken
development further with the introduction of the new 1100D range.
The 1100D range is the ultimate power solution. With its wide choice of build options,
plus all the features and benefits, it presents a secure future for all our customers at
Tier 3/Stage IIIA emissions legislation; and is the platform on which the long-term
solution to Tier 4/Stage IIIB legislation will be built.
Powered by your needs
Lower operating
costs
The 1100D range offers the possibility to move between
different fuel system technologies and aspirations
The 1104D mechanical range offers a class-leading choice
of aspirations. This includes turbocharged and turbo
aftercooled models for use worldwide, with the addition of a
naturally aspirated model for markets outside of the US
State of the art design
l
Latest diesel technology development used in mechanical
control system
Minimised impact on heat rejection and fuel consumption
Service intervals are
500 hours standard
Perkins comprehensive warranty
cover for two years (up to 3,000 hours). With
three years on major engine components
Low usage warranty package is also available
Product support
l
Through an experienced network of distributors and
dealers, fully trained engine experts deliver total service
support around the clock, 365 days a year. Service points
around the world have a comprehensive suite of web based
tools covering technical information, parts identification
and ordering systems, all dedicated to maximising the
productivity of your engine
Throughout the entire life of a Perkins engine, we provide
access to genuine OE specification parts giving 100%
reassurance that you receive the very best in terms of quality
for lowest possible cost... wherever your Perkins powered
machine is operating in the world
Component commonality
l
Shared front and rear ends and repeated components
pistons, con rods and valve gear
Rationalised inventory, streamlined training and consistent
serviceability
Reduced noise
l
Noise minimised at source engine sound levels have been
reduced up to 1 dBA
Reduction in noise suppression costs
Meets Tier 3, Stage IIIA emissions requirements. Tier 3 refers to
EPA (US) standards. Stage IIIA refers to European standards
Lower installation costs
l
Virtually identical hook-up points and envelope size as the
1104C model
Customer enjoys a seamless transition during the emissions
changeover process
Performance Data
Gross Intermittent (ISO 14396)
Speed (rev/min)
Power Output (kW)
Power Output (hp)
Peak Torque (Nm)
Peak Torque (lbf ft)
83.0
111.3
418.0
308.3
2200
2200
1400
1400
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1. Derating may be required for conditions outside these;
consult Perkins Engines Company Limited.
Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Publication No. PN1836/02/14 Produced in England 2014 Perkins Engines Company Limited
1100 Series 1104D-44TA
83 kW / 111 hp at 2200 rpm
663 mm
602 mm
775 mm
Engine specification
430
418.0
420
410
400
Torque (Nm)
390
380
370
360
350
340
330
83.0 83.0
80
75
70
65
60
55
50
45
40
35
30
25
20
15
800
900
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400
Engine Speed (rev/min)
Performance after 60 hours operation with fuel oil at 40C at pump inlet
Note: lower speed ratings cannot be read off this curve
General data
Number of cylinders............................................ 4 vertical in-line
Bore and stroke..............................................105 mm x 127 mm
Displacement................................................................. 4.4 litres
Aspiration........................ Turbocharged (air-to-air charge cooled)
Cycle...............................................................................4 stroke
Combustion system...............................................Direct injection
Compression ratio............................................................. 16.2:1
Rotation..................................Anti-clockwise, viewed on flywheel
Cooling system................................................................... Liquid
Dimensions Length..................................................... 663 mm
Width....................................................... 620 mm
Height...................................................... 775 mm
Dry weight........................................................................ 306 kg
Final weight and dimensions will depend on completed specification.
Photographs are for illustrative purposes only and may not
reflect final specification.
All information in this document is substantially correct at time
of printing and may be altered subsequently.
Publication No. PN1836/02/14 Produced in England
2014 Perkins Engines Company Limited
90
85
Power (kW)
Engine ratings
l SAE A or SAE B PTO drive
l Timing case and gear driven auxiliaries
l Flywheel housings
l Flywheel and starter rings
l Oil filter positions
l Adapter plates
l Starter motors
l Fan drives and locations
l Lubricating oil filters and breathers
l Front-end drives
l Alternators
l Belt driven auxiliaries
l Induction manifolds
l Exhaust manifolds
l Fuel filter positions
l Cold start aids
l Engine mountings
l Cooling packs
l Air compressor
Perkins Engines Company Limited
Peterborough PE1 5FQ
United Kingdom
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins.com
