Mechanical seals

Magnetic couplings

Pump seals

Agitator seals

Compressor seals

Magnetic couplings

Content and other brochures

Mechanical seals

Magnetic couplings

Additional Information

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Mechanical seals for pumps . . . . . . . . . . . . . . . . . . . . 6
Agitator seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Compressor seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Materials table . . . . . . . . . . . Inside back cover

EagleBurgmann Your System Supplier

Seal supply systems

Important note

Separately available brochures offer information

about additional product lines as well as notes on the
technology and selection of mechanical seals.

Brochure 84 Pages (Code: DMS_SSE)

All the technical specifications are based on extensive

tests and our many years of experience. However, the
diversity of possible applications means that they can
serve as guide values only.

All products can be retrieved interactively from

eagleburgmann.com. Among others, you will find
current data sheets in PDF format available for
download here.

Mechanical seal technology and

selection
Brochure 58 pages (Code: DMS_TSE)
Technical principles, designation codes, API plans, notes
on installation and operation and articles covering
theory and practice are summarized in the first part.
The second part concerns choosing a seal according to
media. Recommendations for arrangement, operation,
type and materials of the required mechanical seal for
over 900 media.
With extensive additional information.

The entire product portfolio of systems and components

for the cooling, flushing, pressurization and supplying
of liquid and gas-lubricated mechanical seals, e.g.
quench and Thermosiphon systems, heat exchangers,
buffer pressure systems, leakage monitoring and
API682-compliant supply systems.

Carbon floating ring seals

Brochure 32 Pages (Code: EBES)

TotalSealCare . . . . . . . . . . . . . . . . . . Outside back cover

Company profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Additional product lines. . . . . . . . . . . . . . . . . . . . . . . 142

It should be noted that the extremal values of each

operating parameter cannot be applied at the same time
because of their interaction. Furthermore, the operating
range of each specific product depends on the
respective shaft diameter, materials used, mode of
operation and on the medium to be sealed.
A guarantee can only be given in the individual case if
the exact conditions of application are known and these
are confirmed in a special agreement. When critical
conditions of operation are involved, we recommend
consulting with our specialist engineers.
Subject to change.

Maintenance-free, compact cartridge labyrinth

seals with long service life and best performance from
EagleBurgmann-Espey. For the sealing of gases,
dust and vapors in turbines, fans, compressors,
centrifuges and mills.

Our products
as varied as our customers
EagleBurgmann products deliver safe, reliable sealing
performance in any application including oil pumping and
cracking, gas compression, process gas containment,
phase separation or synthesis of chemical substances,
pipeline sealing, dairy product filling or compensation
oftemperature expansion in flue gas systems.

The EagleBurgmann portfolio:

A product range with an unlimited horizon.
EagleBurgmann is one of the worlds leading
manufacturer of industrial sealing solutions. Our
extensive portfolio includes everything from standard
seals to one-off application-specific designs:

Our challenge is to design seals that are able to

withstand a wide range of media, different aggregate
states and varying pressure and temperature and to
provide special solutions for small installation up to seal
contact areas of several meters. Every application has its
own special requirements profile, and our job is to
provide the best sealing solution.

Mechanical seals
Magnetic couplings
Seal supply systems
Carbon floating ring seals
Compression packings
Gaskets
Expansion joints
Special products
TotalSealCare Services
Total commitment to quality excellence.
Outstanding quality is the top priority at EagleBurgmann.
Our products are designed for user-friendly installation,
optimal functionality and long service life. Our R&D
activities, advanced quality management system,
in-house test facilities and in-depth engineering expertise
ensure that our seals meet the most demanding
customer expectations. Starting right back in the
development phase, our employees continually verify the
quality of our products, and we carry out systematic
inspection and testing to guarantee that customers are
getting top quality.
Proud of the trust which our customers place
in us.
EagleBurgmann is a dependable, competent partner.
Our customers are always in total control of the media in
their pumps, agitators, compressors, blowers, turbines,
valves and pipeline systems even when operating
conditions are extremely harsh. There is good reason
why customers in the oil & gas, refinery, chemical,
energy, food processing, paper, water, marine, aerospace,
mining and other industries choose EagleBurgmann as
their sealing solutions supplier.

Mechanical seals

Mechanical seals for pumps

EagleBurgmann offers a complete range of liquid and
gaslubricated pump shaft seals including standard
and engineered seals in single and multi-seal versions.
Wealso offer a complete range of solutions for all
API682 4th edition* categories and arrangements.
Theportfolio includes abroad selection of material and
surface technologies such as DiamondFace coatings.
Mechanical seals for agitators
Sealing solutions for normal and sterile applications.
The design and selection of materials ensure that the
seals are rugged enough to deliver outstanding cost
and engineering performance in everyday applications.
Mechanical seals for compressors
A complete range of products for process gas
compressors from a single source. Single, double and
tandem versions and tandem seals with intermedia
labyrinths. Rugged, non-wearing, non-contact seals
designed to deliver outstanding performance and long
service life.
* Request our separately available API 682 printed publication
series. Additional comprehensive documents and information
are available at eagleburgmann.com/api682.

Mechanical seals for pumps

Pusher seals
M2N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
M3N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
M7N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
M74-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
H7N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HA211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LB500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
H74-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
EK700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pulace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
HRN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
H75VN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
H75VK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
HJ92N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
H12N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
H3B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
H10/H8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Standard cartridge seals
Cartex Single seals . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cartex Dual seals . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cartex ANSI Single seals . . . . . . . . . . . . . . . . . . . . . 38
Cartex ANSI Dual seals . . . . . . . . . . . . . . . . . . . . . . 40
MA290/MA390 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Unitex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Mtex Single seals. . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Mtex Dual seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
APItex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Elastomer bellows seals
eMG1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
eMG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
MG1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
MG9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
EA560 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
ED560 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
EA100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
EH700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
BT-AR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
BT-A2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
BT-PN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Metal bellows seals
MBS100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
MFL85N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
MFLWT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
MFLCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
MF95N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
YE400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
MFL65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Split seals
Splitex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
HGH201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Gas-lubricated seals
Cartex-GSDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
EM300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CGSH-K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
GSO-DN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
HRGS-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
NF992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Agitator seals
Dry-running seals
SeccoMix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
AD510/AD520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Gas-lubricated seals
AGSZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
AGSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Liquid-lubricated seals
ERB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M481 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M461 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MR-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HS-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSH-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSHLU-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

108
110
112
114
116
117
118

Shut-down seal
STD1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Compressor seals
Gas-lubricated seals
DGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PDGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MDGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TDGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NF941 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

120
122
124
126
127

Oil-lubricated seals
WRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
EBU800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Separation seals
CSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
CobaSeal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Engineered seals
EK777 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
HR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
HRC...N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
SH(V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
SHF/SHP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
SHPV/SHFV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
SAF(V) / SAP(V) . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
SHF(V)-D / SHP(V)-D . . . . . . . . . . . . . . . . . . . . . . . . 86
5

Mechanical seals Mechanical seals for pumps Pusher seals

M2N
l8

d8
l9

1)

d7

H8

H11

h6

d1

5
l 7 +0,5

M2N
Description EagleBurgmann
Product
variants
Seal face
M2
O-Ring
Rotating unit M2 with seat G4
Thrust ring
or G16 (shorter installation length)
Righthand spring
Seal face: Carbon graphite resin impregnated (B)
Lefthand spring
Seat G4: Silicon carbide (Q1),
Seat (G9)
Special cast CrMo steel (S)
O-Ring
Seat G16: Silicon carbide (Q1, Q2),
Special cast CrMo steel (S), Aluminium oxide (V)

M2N4
Rotating unit M2 with seat G6
Seal face: Carbon graphite resin impregnated (B)
Seat G6: Silicon carbide (Q1),
Special cast CrMo steel (S)
Seat alternatives

G6 (EN 12756)

l 16

l5

l6

G4
G4 EagleBurgmann

H8

d7

l 18

H11

l 19

d6

20
H7

d 12

l 14
l 12

d 11

l 28
l 10

l 15

l6

+0,1

l5

G6 (M32N4) EagleBurgmann

d6

min

Part no. to DIN 24250

472
412.1
474
478
479
475
412.2

d6

Recommended applications
Water and waste water technology
Building services industry

Item
1.1
1.2
1.3
1.4
1.4
2
3

30

Standards and approvals

EN 12756

1.1

l 1N

H11

Materials
Seal face: Carbon graphite resin impregnated (B)
Seat G9: Silicon carbide (Q1, Q2),
Special cast CrMo steel (S), Aluminium oxide (V)

l3 / l 21

d 7 H8

Operating range (see note on page 1)

Shaft diameter: d1 = 638 mm (0.25"1.5")
Pressure: p1 = 10bar (145 PSI)
Temperature: t = 20C+140C (4F+355F)
Sliding velocity: vg = 15 m/s (50 ft/s)
Axial movement: 1.0 mm

1.3 1.2

20

20

Advantages
Economical seal solution
No damage of the shaft by set screws
Short installation length possible (G16)

db

d3

1.4

Features
For plain shafts
Single seal
Unbalanced
Conical spring rotating
Dependent on direction of rotation

l6

l5

(EN 12756)
G16G16
EagleBurgmann

Dimensions in mm

d1
6
8
10
12
14
15
16
18
20
22
24
25
26
28
30
32
35
38
1) l

d3
15
18
20
22
25
27
27
30
32
35
38
40
41
43
47
48
53
56

d6

17
19
21

23
27
29
31
33
34

37

d7

21
23
25

27
33
35
37
39
40

43

d8

3
3
3

3
3
3
3
3
3

d11
11.8
15.5
15.5
17.5
20.5
20.5
22
24
29.5
29.5
32
32
34
36
39.2
42.2
46.2
49.2

d12
16
19.2
19.2
21.6
24.6
24.6
28
30
35
35
38
38
40
42
45
48
52
55

db
8
11
13
16
18
19
21
23
26
28
30
31
32
35
37
39
43
47

l1N

40
40
40

40
45
45
45
50
50

50

l 31)

17.5
17.5
17.5

19.5
20.5
22
23.5
25
26.5

26.5

l5

1.5
1.5
1.5

1.5
2
2
2
2
2

l6

4
4
4

4
5
5
5
5
5

l7

8.5
8.5
8.5

8.5
9
9
9
9
9

l8

17.5
17.5
17.5

17.5
19.5
19.5
19.5
19.5
19.5

19.5

l10

7.5
7.5
7.5

7.5
8.5
8.5
8.5
8.5
8.5

8.5

l12
6.5
8
7.5
8
8
7.5
8.5
9
8.5
8.5
8.5
8.5
9
10
11.5
13
13.5
13

l14
5.6
7
6.6
7
7
6.6
7.5
8
7.5
7.5
7.5
7.5
8
9
10.5
10.5
11
10.3

l15
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5

l16
3.8
3.8
3.8
3.8
3.8
3.8
5
5
5
5
5
5
5
5
5
5
5
5

l18

15
15
15
15
15

15
15
15
15
16

l19

7
7
7
7
7

7
7
7
7
8

l211)
10.9
15.5
15.9
16
16
17.4
19
20.5
22
23.5
25
26.5
26.5
26.5
25
28.5
28.5
32

l28

6.6
6.6
6.6

6.6
7.5
7.5
7.5
7.5
7.5

7.5

8
8
8

8
8
8
8
8
8

R
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5

valid for M2N, l21 valid for M2

Mechanical seals Mechanical seals for pumps Pusher seals

M3N

l 3 / l 21

3)

Part no. to DIN 24250

472
412.1
474
478
479
475
412.2

Operating range (see note on page 1)

Shaft diameter: d1 = 680 mm (0.24"3.15")
Pressure: p1 = 10bar (145 PSI)
Temperature: t = 20C+140C (4F+355F)
Sliding velocity: vg = 15 m/s (50 ft/s)
Axial movement: 1.0 mm

Product variants
M3
Items and description as M3N.
Seal face: Special cast CrMo steel (S)
Seat G13: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)

Materials
Seal face: CrMo special cast steel (S)
Seat G9: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)

M32
Items and descriptions as for type M3N, but with carbon
graphite seal face shrink-fitted into the seal face carrier
(Item no. 1.1).

Standards and approvals

EN 12756

Seal face: Carbon graphite antimony impregnated (A),

Carbon graphite resin impregnated (B)
Seat G4: Special cast CrMo steel (S),
Silicon carbide (Q1, Q2)
Seat G6 (M32N4): Special cast CrMo steel (S),
Silicon carbide (Q1, Q2)
Seat G9 (M32N): Silicon carbide (Q1, Q2)

H8

d8
l9

l 1N

Item
1.1
1.2
1.3
1.4
1.4
2
3

l 7 +0,5

DescriptionEagleBurgmann M3N
Seal face
O-Ring
Thrust ring
Righthand spring
Lefthand spring
Seat (G9)
O-Ring

Seat G6 also available in A, B = G30 (longer installation

length than G6)

M37G
Items and descriptions as for type M3N, but with shrink
fitted silicon carbide seal face to the seal face carrier
(Item no. 1.1)
Shaft diameter: d1 = 1680 mm (0.63"3.15")
Temperature: t = 20C+180C (4F+355F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Seal face: Silicon carbide (Q12, Q22),
Tungsten carbide (U22)
Seat G4: Silicon carbide (Q1, Q2)
Seat G13: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
Seat G6 (M37GN4): Silicon carbide (Q1, Q2)
Seat G9 (M37GN): Carbon graphite antimony impregnated
(A), Carbon graphite resin impregnated (B),
Silicon carbide (Q1, Q2)
Seat G6 also available in A, B = G30 (longer installation
length than G6)

l22

l 23
d 13

d 13

M32

M37G
M32 EagleBurgmann

20

Advantages
Universal application opportunities
Insensitive to low solids content
No damage of the shaft by set screws
Large choice of materials
Short installation lengths possible (G16)
Variants with shrink-fitted seal face available

Recommended applications
Chemical industry
Pulp and paper industry
Water and waste water technology
Building services industry
Food and beverage industry
Sugar industry
Low solids content media
Water and sewage water pumps
Submersible pumps
Chemical standard pumps
Eccentric screw pumps
Cooling water pumps
Basic sterile applications

1.1

d7

h6

d1

1.3 1.2

l6

H11

min

db

d3

Features
For plain shafts
Single seal
Unbalanced
Rotating conical spring
Dependent on direction of rotation

1.4

l5

d6

l8
b

M37G EagleBurgmann

Seat alternatives

d1
6
8
10*
12*
14*
15
16*
18*
20*
22*
24*
25*
26
28*
30*
32*
33*
35*
38*
40*
42
43*
45*
48*
50*
53*
55*
58*
60*
63*
65*
68*
70*
75*
80*

d3
14
18
19
21
23
24
26
29
31
33
35
36
37
40
43
46
47
49
53
56
59
59
61
64
66
69
71
76
78
83
84
88
90
98
100

d6

17
19
21

23
27
29
31
33
34

37
39
42
42
44
49
51

54
56
59
62
65
67
70
72
75
77
81
83
88
95

d7

21
23
25

27
33
35
37
39
40

43
45
48
48
50
56
58

61
63
66
70
73
75
78
80
83
85
90
92
97
105

d13
16
18
20
22
24
25
26
31
34
36
38
39
40
42
44
46
47
49
54
56
58
59
61
64
66
69
71
78
79
83
85
88
90
98
103

db
8
11
13
16
18
19
21
23
26
28
30
31
32
35
37
39
40
43
45
49
52
52
55
58
61
64
66
69
71
74
77
80
83
88
93

l1N

40
40
40

40
45
45
45
50
50

50
50
55
55
55
55
55

60
60
60
60
70
70
70
70
70
80
80
80
80
90

l 33)

15.5
16
16.5

18
19.5
22
21.5
23.5
26.5

26.5
26.5
28.5
28.5
28.5
33.5
36

38.5
39.5
46
45
47
49
55
55
55
55
55
57
62
61.8

l5

1.5
1.5
1.5

1.5
2
2
2
2
2

2
2
2
2
2
2
2

2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3

l6

4
4
4

4
5
5
5
5
5

5
5
5
5
5
6
6

6
6
6
6
6
6
6
6
6
6
7
7
7
7

l7

8.5
8.5
8.5

8.5
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

l8

17.5
17.5
17.5

17.5
19.5
19.5
19.5
19.5
19.5

19.5
19.5
19.5
19.5
19.5
22
22

22
22
22
23
23
23
23
23
23
23
26
26
26
26.2

l6

G13

H8

d7

l 18

H11

l 19

d6

H7

d 12

20
+0,1

d 11

d 12

l9
l10

10
7.5
10
7.5
10
7.5

10
7.5
11.5 8.5
11.5 8.5
11.5 8.5
11.5 8.5
11.5 8.5

11.5 8.5
11.5 8.5
11.5 8.5
11.5 8.5
11.5 8.5
14
10
14
10

14
10
14
10
14
10
15
10.5
15
12
15
12
15
12
15
12
15
12
15
12
18
12.5
18
12.5
18
12.5
18.2 13

l5

30
H7

d 11

R
+0,1

30
H8

d7

H8

d7
d111) d121)
11.5 16
15.5 19.2
15.5 19.2
17.5 21.6
20.5 24.6
20.5 24.6
22
28
24
30
29.5 35
29.5 35
32
38
32
38
34
40
36
42
39.2 45
42.2 48

46.2 52
49.2 55
52.2 58
53.3 62

55.3 64
59.7 68.4
60.8 69.3

66.5 75.4
69.5 78.4
71.5 80.4

76.5 85.4
82.7 91.5
83
92
90.2 99
95.2 104

l 16

l 15

l 13
l 11

G4
G4 EagleBurgmann

G6 (M32N4) EagleBurgmann

d8

3
3
3

3
3
3
3
3
3

3
3
3
3
3
4
4

4
4
4
4
4
4
4
4
4
4
4
4
4
4

l 16

l 15

l 14
l 12

G6 (EN 12756)

G9 EagleBurgmann

Dimensions in mm

l 28
l 10

H11

20
H11

d6

G9 (EN 12756)

l6

l5

d6

l6

20

l5

(EN 12756)
G16G16
EagleBurgmann

G13 (M3) EagleBurgmann

l11
9
9
9
10
10
11
11.5
12.5
12.5
12.5
12.5
12.5
13
14
14
14

14.5
14.5
14.5
17

17
17
17

18
18
18

18
19
18
18
19

l12
6.5
8
7.5
6.5
6.5
7.5
8.5
9
8.5
8.5
8.5
8.5
9
10
11.5
11.5
12
12
11.3
11.8
13.2
13.2
12.8
12.8
12.8
13.5
14.5
14.5
14.5
14.2
14.2
14.9
14.2
15.2
16.2

l13
7.1
7.1
7.1
7.6
7.6
8.6
9
10
9.5
9.5
9.5
9.5
10
11
11
11

11.5
11.5
11.5
14.3

14.3
14.3
14.3

15.3
15.3
15.3

15.3
16
15.3
15.3
16.3

l14
5.6
7
6.6
5.6
5.6
6.6
7.5
8
7.5
7.5
7.5
7.5
8
9
10.5
10.5

11
10.3
10.8
12

11.6
11.6
11.6

13.3
13.3
13.3

13
13.7
13
14
15

l15
1.2
1.2
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5

1.5
1.5
1.5
2
2
2
2
2

2
2
2

2
2
2
2
2

l16
3.8
3.8
3.8
3.8
3.8
3.8
5
5
5
5
5
5
5
5
5
5

5
5
5
6

6
6
6

6
6
6

6
6
6
6
6

l18
l19

15
7
15
7
15
7
15
7
15
7

15
7
15
7
15
7
15
7
15
7
16
8
16
8

16
8
16
8
16
8
17
9.5
17
9.5
17
9.5
18
10.5
18
10.5
18
10.5
18
10.5
18.5 11
19
11.5
19
11.5
19
11.5

l213)
10.5
15.5
15.5
15.5
15.5
15.5
17.5
18.5
20
21.5
23
24.5
24.5
24.5
24.5
28

28
31
34
35

36.5
42
43

47
50
51

52
53
54
55
58

l22
11.9
16.9
16.9
17.4
17.4
17.4
19.5
20.5
22
23.5
25
26.5
26.5
26.5
25
28.5

28.5
32.2
34.7
37.3

39.2
44.7
45.7

49
52
53

54.3
55.3
56.3
56.3
59.3

l23

16.5

16.5
18
19
20.5
22
23.5
23.5
24.5
24.5
28

28
31
34
35

36.5
42
43

47
50
51

52
52.7
54
54
58

l28

6.6
6.6
6.6

6.6
7.5
7.5
7.5
7.5
7.5

7.5
7.5
7.5
7.5
7.5
9
9

9
9
9
9.5
11
11
11
11
11
11
11.3
11.3
11.3
12

b2) R
1.2
1.2
(8) 1.2
(8) 1.2
(8) 1.2

1.2
(8) 1.5
(8) 1.5
(8) 1.5
(8) 1.5
(8) 1.5
(8) 1.5

1.5
(8) 1.5
(8) 1.5
(8) 1.5
(8) 1.5
(8) 1.5
7.5 1.5
(8) 1.5

2.5
7.5 2.5
(8) 2.5
(8) 2.5
(8) 2.5
8 2.5
(8) 2.5
(8) 2.5
(8) 2.5
(8) 2.5
(8) 2.5
(8) 2.5
(10) 2.5
(10) 2.5
10 2.5

1) Fitting

dimensions d11 and d12 only apply to type M37G with d1 >16 mm
Dimensions in brackets lie either above or below l1N
3) l valid for M3...N, l valid for M3
3
21
* According to EN 12756
2)

Mechanical seals Mechanical seals for pumps Pusher seals

M7N
l3

l8
l9

1) d

>100 mm: 30
>100 mm: +0.1
3) d >100 mm: H7
1
2) d

Features
For plain shafts
Single seal
Unbalanced
Super-Sinus-spring or multiple springs rotating
Independent of direction of rotation
Pumping screw for media with higher viscosity (M7..F)
Variant with PTFE secondary seals for high chemical
resistance (M78N)
Advantages
Universal application opportunities
Efficient stock keeping
due to easily interchangeable faces
Extended selection of materials
Insensitive to low solids contents
Flexibility in torque transmissions
Self cleaning effect
Short installation length possible (G16)
Operating range (see note on page 1)
Shaft diameter: d1 = 14100 mm (0.55"3.94")
Pressure: p1 = 25bar (363 PSI)
Temperature: t = 50C+220C
(58F+428F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement:
d1 = 25 mm: 1 mm
d1 = 28 63 mm: 1.5 mm
d1 = from 65 mm: 2 mm

H8 3)

1.1

1.4

1.3

20

d7

1.2

1.5

H11 2)

1.6

d6

( >100 = h8 )

h6

d1

d3

mx

1)

d8

l5

l6

l 1k

l 7 +0,5

Materials
Item Part no. to DIN 24250 Description
M7N EagleBurgmann
Seal face: Special cast CrMo steel (S), Silicon carbide
1.1 472
Seal face
(Q1, Q2), Aluminium Oxide (V)
1.2 485
Drive collar
Seat G9: Carbon graphite antimony impregnated (A),
1.3 474
Thrust ring
Carbon graphite resin impregnated (B), Silicon carbide
1.4 412.1
O-Ring
(Q1*, Q2*)
1.5 477
Spring
Seat G4: Silicon carbide (Q1*, Q2*)
1.6 904
Set screw
Seat G6: Silicon carbide (Q1*, Q2*)
2
475
Seat (G9)
Seat G13: Carbon graphite antimony impregnated (A),
3
412.2
O-Ring
Carbon graphite resin impregnated (B)
Recommended applications
Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K) Process industry
Springs: CrNiMo steel (G)
Chemical industry
Metal parts: CrNiMo steel (G), Duplex (G1)
Pulp and paper industry
Water and waste water technology
* Cannot be combined with seal face in S
Shipbuilding
Standards and approvals
Food and beverage industry
Lube oils
EN 12756
Low solids content media
Torque transmissions
Water / sewage water pumps
Chemical standard pumps
Vertical screw pumps
Gear wheel feed pumps
Multistage pumps (drive side)
Circulation of printing colors with viscosity
500 ... 15,000 mm2/s
d1 Torque
>100transmission
mm (3,94")
Drive key
Torque transmission by
(M7S2 / M74S2)
Set screw with cone point EagleBurgmann
4 set screws with cone
Torque transmission
point. Offset: 90
Drive key EagleBurgmann

Seat alternatives

G9 (EN 12756)

10

G6 (EN 12756)

G6 (M32N4) EagleBurgmann

l5

l6

G13
G13 (M3) EagleBurgmann

H8

d7

l 18

H11

l 19

d6

20
H7

d 12

l 13
l 11

+0,1

H7

d 12

G4
G4 EagleBurgmann

l 16

d 11

+0,1

l 14
l 12

l 15

30

l 16

d 11

l 15

30
l 28
l 10

H11

H8

d7

l6

d6

H11

d6

G9 (M7N) EagleBurgmann

l5

d 7 H8

20

l6

20

l5

G16
12756, but l1k
G16 (EN
EagleBurgmann
is shorter than specified)

Product variants
M74
Dimensions, items and descriptions
as for M7N, but with multiple springs
(Item no. 1.5). Preferably for d1 >100 mm (3.94").
M7F
Shaft diameter: d1 = max. 100 mm (3.94")
Dimensions, items and descriptions
as for type M7N, but with pumping screw. Dependent on
direction of rotation! (Viscosity ISO VG10).
M74F
Shaft diameter: d1 = 14200 mm (0.55"7.87")
Dimensions, items and descriptions
as for type M7N, but with multiple springs and pumping
screw. Dependent on direction of rotation!
(Viscosity ISO VG10).

M7S2
Shaft diameter: d1 = max. 100 mm (3.94")
Dimensions, items and descriptions
as for type M7N, but with drive key.
(without item no. 1.6).
M74S2
Shaft diameter: d1 = 28200 mm (1.10"7.87")
Dimensions, items and descriptions
as for type M7N, but with multiple springs and drive key.
(without item no. 1.6).

* Cannot be combined with seal face made of silicon carbide (Q1)

M7F

M7S2

Dimensions inM74F
mm

d1
14*
16*
18*
20*
22*
24*
25*
28*
30*
32*
33*
35*
38*
40*
43*
45*
48*
50*
53*
55*
58*
60*
63*
65*
68*
70*
75*
80*
85*
90*
95*
100*
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200

d3
25
27
33
35
37
39
40
43
45
47
48
50
55
57
60
62
65
67
70
72
79
81
84
86
89
91
99
104
109
114
119
124
138
143
148
153
158
163
168
173
178
183
191
196
201
206
211
216
221
226
231
236

d6
21
23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115
122.2
128.2
136.2
138.2
142.2
146.2
152.2
156.2
161.2
168.2
173.2
178.2
183.2
188.2
193.2
207.5
212.5
217.5
222.5
227.5

d7
25
27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125
134.3
140.3
148.3
150.3
154.3
158.3
164.3
168.3
173.3
180.3
185.3
190.3
195.3
200.3
205.3
219.3
224.3
229.3
234.3
239.3

d 24 min

d s 0,05
( >100 0,1)

0,5

M74F

M78N
Shaft diameter: d1 = 18100 mm (0.71"3.94")
Temperature: t = max. 180C (356F)
Dimensions, items and description as for M7N. Design
of the seal face especially for secondary sealing element
made of PTFE (T).
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B),
Silicon carbide (Q1)*
Seat G9: Special cast CrMo steel (S)*,
Silicon carbide (Q1)

M7 S2 EagleBurgmann

EagleBurgmann

d8
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

d11
20.5
22
24
29.5
29.5
32
32
36
39.2
42.2
44.2
46.2
49.2
52.2
53.3
55.3
59.7
60.8
63.8
66.5
69.5
71.5
74.5
76.5
82.7
83
90.2
95.2
100.2
105.2
111.6
114.5

d12
24.6
28
30
35
35
38
38
42
45
48
50
52
55
58
62
64
68.4
69.3
72.3
75.4
78.4
80.4
83.4
85.4
91.5
92
99
104
109
114
120.3
123.3

d24
16
18
20
22
24
26
27
30
32
34
35
37
40
42
45
47
50
52
55
57
60
62
65
67
70
72
77
82
87
92
97
102
108
113
118
123
128
133
138
143
148
153
158
163
168
173
178
183
188
193
198
203

ds
34
36
38
40
42
44
45
47
49
51
51
54
59
61
65
66
69
71
75
76
83
85
88
95
93
95
105
109
114
119
124
129
143
148
153
158
163
168
173
178
183
188
196
201
206
211
216
221
226
231
236
241

l1k
35
35
37.5
37.5
37.5
40
40
42.5
42.5
42.5
42.5
42.5
45
45
45
45
45
47.5
47.5
47.5
52.5
52.5
52.5
52.5
52.5
60
60
60
60
65
65
65
67
67
67
67
67
67
67
67
67
69
80
80
80
80
80
84
84
84
84
84

l3
25
25
26
26
26
28.5
28.5
31
31
31
31
31
31
31
31
31
31
32.5
32.5
32.5
37.5
37.5
37.5
37.5
34.5
42
42
41.8
41.8
46.8
47.8
47.8
47
47
47
47
47
47
47
47
47
47
56
56
56
56
56
56
56
56
56
56

l5
1.5
1.5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

l6
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12

l7
8.5
8.5
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

l8
17.5
17.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22
22
22
22
22
23
23
23
23
23
23
23
26
26
26
26.2
26.2
26.2
25.2
25.2
30
30
30
30
30
30
30
30
30
32
34
34
34
34
34
38
38
38
38
38

M7F
l9 l10EagleBurgmann
l11 l12

10
10
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14
14
14
14
14
15
15
15
15
15
15
15
18
18
18
18.2
18.2
18.2
17.2
17.2
20
20
20
20
20
20
20
20
20
22
24
24
24
24
24
28
28
28
28
28

7.5
7.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
10
10
10
10
10
10.5
12
12
12
12
12
12
12.5
12.5
12.5
13
15
15
15
15

10
11.5
12.5
12.5
12.5
12.5
12.5
14
14
14
14.5
14.5
14.5
14.5
17
17
17
17
17
18
18
18
18
18
19
18
18
19
19
19
20
20

6.5
8.5
9
8.5
8.5
8.5
8.5
10
11.5
11.5
12
12
11.3
11.8
13.2
12.8
12.8
12.8
13.5
14.5
14.5
14.5
14.2
14.2
14.9
14.2
15.2
16.2
16
16
17
17

l13
7.6
9
10
9.5
9.5
9.5
9.5
11
11
11
11.5
11.5
11.5
11.5
14.3
14.3
14.3
14.3
14.3
15.3
15.3
15.3
15.3
15.3
16
15.3
15.3
16.3
16.3
16.3
17.3
17.3

l14
5.6
7.5
8
7.5
7.5
7.5
7.5
9
10.5
10.5
10.5
11
10.3
10.8
12
11.6
11.6
11.6
12.3
13.3
13.3
13.3
13.3
13
13.7
13
14
15
14.8
14.8
15.8
15.8

l15
1.2
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

l16
3.8
3.8
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

l18

15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
17
17
17
18
18
18
18
18.5
19
19
19
19
20.5
20.5
20.5

l19

7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
9.5
9.5
9.5
10.5
10.5
10.5
10.5
11
11.5
11.5
11.5
11.5
13
13
13

l28
6.6
6.6
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
9
9
9
9
9
9.5
11
11
11
11
11
11
11.3
11.3
11.3
12
14
14
14
14

4
4
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12

6
6
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12

mx
M5
M5
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

u max.
10
10
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
24
24
24
24
24
24
24
24
24
24

t
1.5
1.5
1.1
1.1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1

R
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

* EN 12756
d 1 >200 on request

11

Mechanical seals Mechanical seals for pumps Pusher seals

M74-D
l1
l3

1) d

>100 mm: 30
>100 mm: +0.1
3) d >100 mm: H7
1

l 31

2) d

1.3

1.2

1)

H8 3)

1.8

1.4

l8

l6

0,05

ds

Recommended applications
Process industry
Chemical industry
Pulp and paper industry
Low solids content and low abrasive media
Toxic and hazardous media
Media with poor lubrication properties
Adhesives
Chemical standard pumps

( >100 0,1 )

0,5

Description
Product variant
Seal faceM74 D EagleBurgmann
M74F-D
Seal face
Dimensions, items and descriptions
Thrust ring
as for M74-D, but with pumping screw.
Drive collar
(Viscosity ISO VG10).
Spring
Dependent on direction of rotation.
Set screw
O-Ring
O-Ring
Seat (G9)
O-Ring
Seat (G9)
O-Ring

M74F D EagleBurgmann

Seat alternatives

G6 (EN 12756)

G6 (M32N4) EagleBurgmann

l 16

H7

d 12

l 13
l 11

+0,1

l 15

d 11

l 14
l 12

H7

30

l 16

d 12

l 28
l 10

l 15

+0,1

l6

30

l5

d 11

Standards and approvals

EN 12756

Part no. to DIN 24250

472.1
472.2
474
485
477
904
412.1
412.2
475.1
412.3
75.2
12.4

H8

* Cannot be combined with seal face in S

Item
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2
3
4
5

d7

Materials
Seal face: Special cast CrMo steel (S),
Silicon carbide (Q1, Q2)
Seat G9: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B),
Silicon carbide (Q1*, Q2*)
Seat G4: Silicon carbide (Q1*, Q2*)
Seat G6: Silicon carbide (Q1*, Q2*)
Seat G13: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)

1.6

1.7

l5

H11

Operating range (see note on page 1)

Shaft diameter: d1 = 18200 mm (0.71"7.87")
Pressure: p1 = 25bar (363 PSI)
Temperature: t = 50C+220C
(58F+428F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement:
d1 up to 100 mm: 0.5 mm
d1 from 100 mm: 2.0 mm

1.1

1.5

d6

Advantages
Efficient stock keeping due to easily interchangeable
faces
Extended selection of materials
Flexibility in torque transmissions
EN 12756 (for connection dimensions d1 up to
100 mm (3.94"))

20

d8

20

Features
For plain shafts
Dual seal
Unbalanced
Rotating multiple springs
Independent of direction of rotation
Seal concept based on the M7 range
Variant with pumping screw available (M74F-D)

( >100 = h8 )

d1

d3

h6

mx

d7

l4

l9

H11 2)

+ 0,5

d6

l7

G13

G4
G4 EagleBurgmann

G13 (M3) EagleBurgmann

Torque transmissions

Set screw with cone point EagleBurgmann

12

d1 >100 mm (3,94")
Torque transmission by
4 set screws with cone
point. Offset: 90

d9

e8

l 35

Drehmomentbertragung
Schapper EagleBurgmann

Spring loaded drive pin

(M74-D22)

Dimensions in mm
d1
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200

d3
33
35
37
39
40
43
45
47
48
50
55
57
60
62
65
67
70
72
79
81
84
86
89
91
99
104
109
114
119
124
138
143
148
153
158
163
168
173
178
183
191
196
201
206
211
216
221
226
231
236

d6
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115
122.2
128.2
136.2
138.2
142.2
146.2
152.2
156.2
161.2
168.2
173.2
178.2
183.2
188.2
193.2
207.5
212.5
217.5
222.5
227.5

d7
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125
134.3
140.3
148.3
150.3
154.3
158.3
164.3
168.3
173.3
180.3
185.3
190.3
195.3
200.3
205.3
219.3
224.3
229.3
234.3
239.3

d8
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

d9
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7

d11
24
29.5
29.5
32
32
36
39.2
42.2
44.2
46.2
49.2
52.2
53.3
55.3
59.7
60.8
63.8
66.5
69.5
71.5
74.5
76.5
82.7
83
90.2
95.2
100.2
105.2
111.6
114.5

d12
30
35
35
38
38
42
45
48
50
52
55
58
62
64
68.4
69.3
72.3
75.4
78.4
80.4
83.4
85.4
91.5
92
99
104
109
114
120.3
123.3

ds

42
44
45
47
49
51
51
54
59
61
65
66
69
71
75
76
83
85
88
95
93
95
105
109
114
119
124
129
143
148
153
158
163
168
173
178
183
188
196
201
206
211
216
221
226
231
236
241

l1
61
61
61
61
61
62
62
62
62
62
69
70
70
70
70
73
73
73
86
86
85
85
91
92
92
92.5
92.5
92.5
90.5
90.5
108
110
110
110
110
110
110
110
110
114
127
127
127
127
127
135
135
135
135
135

l3
38
38
38
38
38
39
39
39
39
39
41
42
42
42
42
43
43
43
56
56
55
55
55
56
56
56
56
56
56
56
68
70
70
70
70
70
70
70
70
70
79
79
79
79
79
79
79
79
79
79

l4
19
19
19
19
19
19.5
19.5
19.5
19.5
19.5
20.5
21
21
21
21
21.5
21.5
21.5
28
28
27.5
27.5
27.5
28
28
28
28
28
28
28
34
35
35
35
35
35
35
35
35
35
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5

l5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

l6
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12

l7
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

l8
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22
22
22
22
22
23
23
23
23
23
23
23
26
26
26
26.2
26.2
26.2
25.2
25.2
30
30
30
30
30
30
30
30
30
32
34
34
34
34
34
38
38
38
38

l9
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14
14
14
14
14
15
15
15
15
15
15
15
18
18
18
18.2
18.2
18.2
17.2
17.2
20
20
20
20
20
20
20
20
20
22
24
24
24
24
24
28
28
28
28

l10
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
10
10
10
10
10
10.5
12
12
12
12
12
12
12.5
12.5
12.5
13
15
15
15
15

l11
12.5
12.5
12.5
12.5
12.5
14
14
14
14.5
14.5
14.5
14.5
17
17
17
17
17
18
18
18
18
18
19
18
18
19
19
19
20
20

l12
9
8.5
8.5
8.5
8.5
10
11.5
11.5
12
12
11.3
11.8
13.2
12.8
12.8
12.8
13.5
14.5
14.5
14.5
14.2
14.2
14.9
14.2
15.2
16.2
16
16
17
17

l13
10
9.5
9.5
9.5
9.5
11
11
11
11.5
11.5
11.5
11.5
14.3
14.3
14.3
14.3
14.3
15.3
15.3
15.3
15.3
15.3
16
15.3
15.3
16.3
16.3
16.3
17.3
17.3

l14
8
7.5
7.5
7.5
7.5
9
10.5
10.5
10.5
11
10.3
10.8
12
11.6
11.6
11.6
12.3
13.3
13.3
13.3
13.3
13
13.7
13
14
15
14.8
14.8
15.8
15.8

l15
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

l16
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

l28
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
9
9
9
9
9
9.5
11
11
11
11
11
11
11.3
11.3
11.3
12
14
14
14
14

l 31
17
17
17
17
17
17.5
17.5
17.5
17.5
17.5
18.5
19
19
19
19
19.5
19.5
19.5
23.5
23.5
24.5
24.5
24.5
23.5
25.5
25.5
25
25.5
25
25
30.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5

l 35
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
19
19
19
19
19
19
19
19
19
19
19
19
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22

mx
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

t
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5

R
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

13

Mechanical seals Mechanical seals for pumps Pusher seals

H7N
l1k
l9

1) d

>100 mm: 2 mm x 30
>100 mm: 30
3) d >100 mm: +0.1
1
4) d >100 mm: H7
1

Operating range (see note on page 1)

Shaft diameter: d1 = 14100 mm (0.55"3.94")
(Single spring: d1 = max. 100 mm (3.94"))
Pressure:
p1 = 80bar (1.160 PSI) for d1 = 14100 mm,
p1 = 25bar (363 PSI) for d1 = 100200 mm,
p1 = 16bar (232 PSI) for d1 >200 mm
Temperature: t = 50C+220C
(58F+428F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement:
d1 22 mm: 1.0 mm
d1 24 58 mm: 1.5 mm
d1 from 60 mm: 2.0 mm
Materials
Seal face: Silicon carbide (Q1, Q2), Carbon graphite
antimony impregnated (A), Aluminium oxide (V),
Special cast CrMo steel (S)
Seat G9: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B),
Silicon carbide (Q1*, Q2*)
Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K)
Springs: CrNiMo steel (G)
Metal parts: CrNiMo steel (G), Duplex (G1)

l8

1.1

20

2)

l5

l6

l2

H8 4)

d1
1.3 R1,6

d6

1.2

1)

Recommended applications
Process industry
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Power plant technology
Pulp and paper industry
Food and beverage industry
Hot water applications
Light hydrocarbons
Boiler feed pumps
Process pumps

1)

1.4

10

1.5

d8
5
l7

+0,5

Item Part no. to DIN 24250

1.1 472
H7N EagleBurgmann
1.2 485
1.3 474
1.4 412.1
1.5 477
1.6 904
2
475
3
412.2

Product variants
H75
Shaft diameter: d1 = 28200 mm (1.10"7.87")
As H7N, but with multiple springs in sleeves (Item no. 1.5)
Axial movement: 2 ... 4 mm, dependent on diameter.

Description
Seal face
Drive collar
Thrust ring
O-Ring
Spring
Set screw
Seat (G9)
O-Ring

H7F
Shaft diameter: d1 = max. 100 mm (3.94")
Dimensions, items and descriptions as for H7N, but with
single spring and pumping screw. Dependent on direction
of rotation! (Viscosity ISO VG10).

H76
Shaft diameter: d1 = 14100 mm (0.55"3.94")
Dimensions, items and descriptions as for H7N, but with
special single spring (Item no. 1.5) for compensating large
axial movements (4 mm).

H75F
Shaft diameter: d1 = 28200 mm (1.10"7.87")
Dimensions, items and descriptions as for H7N, but
with multiple springs and pumping screw. Dependent on
direction of rotation! (Viscosity ISO VG10).
0,5

Advantages
Universal application opportunities (standardization)
Efficient stock keeping due to easily interchangeable
faces
Extended selection of materials
Flexibility in torque transmissions
Self cleaning effect
Short Installation length possible (G16)

1.6

2 ... 4 mm

4 mm

l1k

l1N

d s 0,05
( >100 0,1 )

Features
For stepped shafts
Single seal
Balanced
Super-Sinus-spring or multiple springs rotating
Independent of direction of rotation
Integrated pumping device available (H7F, H75F)
Variant with seat cooling available (H75G115)

( >100 = h8 )

h6

d2

d3

mx

H11 3)

2) d

d7

l3

... 2 mm
l 1K

* Cannot be combined with seal face in S

Standards and approvals

EN 12756

14

H75

H76

H76 EagleBurgmann

H7F/H75F

H7F + H75F EagleBurgmann

Seat alternatives

H8

d7

t 0,2

u max

min

Set screw with cone point EagleBurgmann

d1

H11

Torque transmission

d6

H8

l 18

h1

d24

20

4,1

l 19

d7

H11

d6

a
+0,1

l 40

l6

l9
10
10
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14
14
14
14
14
15
15
15
15
15
15
15
18
18
18.2
18.2
18.2
17.2
17.2
20
20
20
20
20
20
20
20
20
22
24
24
24
24
24
28
28
28
28
28

l 39

24
24.5
24.5
24.5
24.5
26
26
26
26
26
26.5
26.5
28.5
28.5
28.5
28.5
28.5
30.5
30.5
30.2
30.2
30.2
29.2
29.2
29.2
32.5
32.5
32.5
32.5
32.5
32.5
32.5
34.5
34.5
34.5
34.5
34.5
37
37
37
37
37
37
37

d1 >100 mm (3.94")
Drive key
Torque transmission by Drehmomentbertragung
(H7S2/H75S2)
Passfeder
4 set screws with cone
point. Offset: 90
EagleBurgmann

G16 EagleBurgmann

d 22 0,05

l5

d 21 +0,1

l6

20

l5

Torque transmissions

G9 (H7N) EagleBurgmann

k
h2
l 39

G9 (EN 12756)

Dimensions in mm

d1
14*
16*
18*
20*
22*
24*
25*
28*
30*
32*
33*
35*
38*
40*
43*
45*
48*
50*
53*
55*
58*
60*
63*
65*
70*
75*
80*
85*
90*
95*
100*
105*
110*
115*
120*
125*
130*
135*
140*
145*
150*
155*
160*
165*
170*
175*
180*
185*
190*
195*
200*

d2
18
20
22
24
26
28
30
33
35
38
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100
105
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210

d3
33
35
37
39
41
43
45
48
50
55
55
57
60
62
65
67
70
72
79
81
84
86
89
91
99
104
109
114
119
124
129
148
153
158
163
168
173
178
183
191
196
201
206
211
216
221
226
231
236
245
250

d6
21
23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
83
88
95
100
105
110
115
122.2
128.2
136.2
138.2
142.2
146.2
152.2
156.2
161.2
168.2
173.2
178.2
183.2
188.2
193.2
207.5
212.5
217.5
222.5
227.5

G16 (EN 12756, but l1k

and l2 are shorter than
specified)

d7
25
27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
92
97
105
110
115
120
125
134.3
140.3
148.3
150.3
154.3
158.3
164.3
168.3
173.3
180.3
185.3
190.3
195.3
200.3
205.3
219.3
224.3
229.3
234.2
239.3

d8
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

d24
20
22
24
26
28
30
32
35
37
40
40
42
45
47
50
52
55
57
60
62
65
67
70
72
77
82
87
92
97
102
107
118
123
128
133
138
143
148
153
158
163
168
173
178
183
188
193
198
203
208
213

d21

44.65
47.83
47.83
47.83
51
54.18
60.53
63.7
63.7
66.88
70.05
76.4
76.4
79.58
82.75
85.93
85.93
89.1
98.63
101.8
108.15
114.5
117.68
124.03
128.98
135.3
140.3
145.3
150.3
155.3
160.3
165.3
172.3
177.3
182.3
187.3
192.3
197.3
202.3
207.3
212.3
217.3
225.3
230.3

d22

50.57
53.75
53.75
53.75
56.92
60.1
66.45
69.62
69.62
72.8
75.97
82.32
82.32
85.5
88.67
91.85
91.85
95.02
104.55
107.72
114.07
120.42
123.6
129.95
134.9
141.2
146.2
151.2
156.2
161.2
166.2
171.2
178.2
183.2
188.2
193.2
198.2
203.2
208.2
213.2
218.2
223.2
231.2
236.2

ds
38
40
42
44
45
47
49
51
54
59
59
61
65
66
69
71
75
76
83
85
88
95
93
95
105
109
114
119
124
129
134
153
158
163
168
173
178
183
188
196
201
206
211
216
221
226
231
236
241
250
255

G115 Cooled seat

especially for hot water
applications.

G115 EagleBurgmann

l1k
42.5
42.5
45
45
45
47.5
47.5
50
50
50
50
50
52.5
52.5
52.5
52.5
52.5
57.5
57.5
57.5
62.5
62.5
62.5
62.5
70
70
70
75
75
75
75
73
73
73
73
73
73
73
73
83
85
87
87
87
87
87
91
91
91
94
94

l1N

l2 l 3
18 32.5
18 32.5
55 20 33.5
60 20 33.5
60 20 33.5
60 20 36
60 20 36
65 20 38.5
65 20 38.5
65 20 38.5
65 20 38.5
65 20 38.5
75 23 38.5
75 23 38.5
75 23 38.5
75 23 38.5
85 23 38.5
85 25 42.5
85 25 42.5
85 25 42.5
85 25 47.5
95 25 47.5
95 25 47.5
95 25 47.5
95 28 52
105 28 52
105 28 51.8
105 28 56.8
105 28 56.8
105 28 57.8
105 28 57.8

32 53

32 53

32 53

32 53

32 53

32 53

32 53

32 53

34 63

36 63

38 63

38 63

38 63

38 63

38 63

42 63

42 63

42 63

43 66

43 66

l5
1.5
1.5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

l6
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12

l7
8.5
8.5
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

l8
17.5
17.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22
22
22
22
22
23
23
23
23
23
23
23
26
26
26.2
26.2
26.2
25.2
25.2
30
30
30
30
30
30
30
30
30
32
34
34
34
34
34
38
38
38
38
38

l 40

8.5
9
9
9
9
11
11
11
11
11
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14.5
14.5
14
14
14
14
14
15.2
14.5
14.5
14.5
14.5
14.5
14.5
14.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
17.5
17.5

24
24
24
24
24
24
24
24
24
24
24
24
26
26
26
26
26
26
26
26
26
26
26
26
26
30
30
30
30
30
30
30
32
32
32
32
32
34.5
34.5
34.5
34.5
34.5
34.5
34.5

b
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12

8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9.5
9.5
9.5
9.5
9.5
9.5
9.5
10
10
10
10
10
10
10
10
10
10
10
10

f
6
6
7
5.5
8
5.5
5.5
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
14
14

h1

6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1

h2

22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
28.6
28.6
28.6
28.6
28.6
28.6
28.6
30.1
30.1
30.1
30.1
30.1
32.1
32.1
32.1
32.1
32.1
32.1
32.1

9
9
9
9
9
9
9
9
9
9
9
9
11
11
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
14
14
14
14
14
16
16
16
16
16
16
16

mx
u max.
M5
9
M5
9
M5
9
M5
9
M5
9
M6
9
M6
9
M6
12
M6
12
M6
12
M6
12
M6
12
M6
12
M6
12
M6
12
M6
12
M6
12
M6
12
M8
12
M8
12
M8
15
M8
15
M8
14
M8
15
M8
15
M8
15
M8
15
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
18
M8
22
M8
22
M8
22
M8
22
M8
22
M8
22
M8
22
M8
22
M8
22
M8
22
M10 22
M10 22

t
1.1
1.1
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1

* EN 12756

15

Mechanical seals Mechanical seals for pumps Pusher seals

HA211
l

H8

1.5 1.1 n x d 5

0,5

1.3

d4

3
H11

1.2

h7

d1

1.4

d2

min

1.6

l2

d3

l1

l3

Recommended applications
Pulp and paper industry
Water and waste water technology
High-viscosity liquids
Pulp suspensions
Process pumps
Pulp pumps

Materials
Seal face: Silicon carbide (Q1)
Seat: Silicon carbide (Q1)
Secondary seals: EPDM (E), FKM (V)
Metal parts: 1.4401 (G)

d
20
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
60
63
65
70
75
80
85
90
95
100

16

d1
34
38
39
42
44
46
47
49
54
56
59
61
64
66
69
71
78
81
84
90
95
100
107
112
119
124

d2
36
40
41
44
46
48
49
51
58
60
63
65
68
70
73
75
85
88
90
95
104
109
114
119
124
129

d3
29
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
72
75
77
83
88
95
100
105
110
115

d4
35
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
80
83
85
92
97
105
110
115
120
125

d5
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

l
51
53
53
55
55
55
55
59
64
66
66
66
66
73
74
74
76
76
80
83
87
87.5
92.5
92.5
97.5
97.5

l1
41
43
43
45
45
45
45
49
53
55
55
55
55
60
61
61
63
63
67
68
72
72
77
77
82
82

l4

Operating range (see note on page 1)

Pressure: p = 12bar (174 PSI)
Temperature: t = 20C+160C (4F+320F)
Sliding velocity:20 m/s (66 ft/s)
Viscosity:300 Pas
Solids content:7 %

Dimensions in mm

20

Features
Single seal
Unbalanced
Independent of direction of rotation
Positive torque transmission due to bayonet drive
between seal head and drive collar
O-Ring groove for ventilation prevents solids build-up
and enhances flexibility

l2
10
10
10
10
10
10
10
10
11
11
11
11
11
13
13
13
13
13
13
15
15
15.5
15.5
15.5
15.5
15.5

l3
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7

l4
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3

B
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4
4.5
4.5
4.5
5
5
5
5
5
5
5
6
6
6
6
6

HA211 EagleBurgmann

Item Description
1.1
Seal face
1.2, 1.5, 3
O-Ring
1.3
Drive collar
1.4
Spring
1.6
Set screw
2
Seat

Mechanical seals Mechanical seals for pumps Pusher seals

LB500
l
l1

8
l2

0,3

Operating range (see note on page 1)

Pressure: p = vacuum35bar (508 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg =20 m/s (66 ft/s)
Viscosity:500 mPas
Solids content:0.5 %
Materials
Seal face: Carbon graphite resin impregnated (B),
High density carbon graphite
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V)
Metal parts: 1.4401 (G)
Product variant
Configuration sample
acc. to API 682 (1CW-FX)

20

l4

l3

LB500 EagleBurgmann
Item Description

1.1
1.2
1.3
1.4, 3
1.5
1.6
2

Recommended applications
Chemical industry
Process industry
Acids
Alkaline solutions
Salt solutions
Low viscosity oils
Monomers
Hydrocarbons
Water
Seawater
Process pumps
Dimensions in mm
d
25
28
30
32
33
35
38
40
42
43
45
48
50
53
55
60
63
65
70
75
80
85
90
95
100
105
110

d1
39
42
44
46
47
49
55
57
59
60
62
65
67
70
72
77
80
82
87
92
97
102
107
112
117
122
127

d2
41
44
46
48
49
51
58
60
62
63
65
68
70
73
75
85
88
90
95
104
109
114
119
124
129
134
139

d3
29
33
34
37
37
39
42
44
49
49
51
54
56
59
62
67
70
72
77
83
88
95
100
105
110
115
120

H8

Standards and approvals

API 682/ISO 21049
ANSI

d4

n x d 6 (n = 1)

H11

d5
1.4

d3

0,5

1.6

Features
Single seal
Balanced
Independent of direction of rotation
Rotating multiple springs
Advantages
API 682 (Type A) compliant
Fits to EN and ANSI seal chambers
Optimized, narrow width seal face design

1.1

h7

d1

1.2 1.5 1.3

d2

min

l5

d4
35
39
40
43
43
45
48
50
56
56
58
61
63
66
70
75
78
80
85
92
97
105
110
115
120
125
130

d5
20
24
25
27
28
30
33
35
37
38
40
43
45
48
50
55
58
60
65
70
75
80
85
90
95
100
105

d6
44
44
44
44
44
44
45
45
48
48
48
48
48
48
50
50
50
50
50
53
53
53
53
53
53
4
4

l
34
34
34
34
34
34
35
35
37
37
37
37
37
37
37
37
37
37
37
38
38
37.5
37.5
37.5
37.5
53
53

l1
10
10
10
10
10
10
10
10
11
11
11
11
11
11
13
13
13
13
13
15
15
15.5
15.5
15.5
15.5
37.5
37.5

l2
5.5
5.5
5.5
5.5
5.5
5.5
5
5
5
5
5
5
6
6
6
6
6
6
6
7
7
7
7
7
7
15.5
15.5

Seal face
Drive collar
Thrust ring
O-Ring
Spring
Set screw
Seat

l3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
7
7

l4
24
24
24
24
24
24
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
3
3

l5
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
25
25

b
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4.5
4.5
4.5
4.5
4.5
5
5
5
5
5
5
6
6
6
6
6
6

LB50055 Cartridge EagleBurgmann

17

Mechanical seals Mechanical seals for pumps Pusher seals

H74-D
l1
l2

l7 +0,5

l31

l2

l4

1) d

1 >100 mm: 2 mm x 30
d1 >100 mm: 30
3) d >100 mm: H7
1
4) d >100 mm: +0.1
1
2

mx

2)

Features
For stepped shafts
Dual seal
Balanced
Rotating multiple springs
Independent of direction of rotation
Seal concept based on the H7 range
Variant with pumping screw available (H74F-D)

1.3 R1,6

l8

1.2

Item
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2
3
4
5

Part no. to DIN 24250

472.1
472.2
474
485
477
904
412.1
412.2
475.1
412.3
475.2
412.4

l3

l5

l6

Description
Recommended applications
Seal face
Process industry
H74 D EagleBurgmann
Seal face
Oil and gas industry
Thrust ring
Refining technology
Drive collar
Petrochemical industry
Spring
Chemical industry
Set screw
Pulp and paper industry
O-Ring
Power plant technology
O-Ring
Low solids content and low abrasive media
Seat (G9)
Toxic and hazardous media
O-Ring
Media with poor lubrication properties
Seat (G9)
Adhesives
O-Ring
Chemical standard pumps

G6 (EN12756)

G6 (M32N4) EagleBurgmann

Torque transmission

d12 105 mm Torque

transmission
by EagleBurgmann
Set screw with
cone point
4 set screws with cone
point. Offset: 90

l 16

H7

d 12

l 14
l 12

+0,1

l 15

d 11

H8

l 28
l 10

d7

30

l6

H11

l5

d6

20

Seat alternatives

G4 EagleBurgmann
G4

d3

1.5

1)

1.4 1.8

10

1.6

d1

h6

H11 4)

d6

1.7

d2

H8 3)

d7

l8

l9

Materials
Seal face: Silicon carbide (Q1, Q2), Carbon graphite
antimony impregnated (A), Aluminium oxide (V),
Special cast CrMo steel (S)
Seat G9: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B), Silicon carbide
(Q1*, Q2*)
Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K)
Springs: CrNiMo steel (G)
Metal parts: CrNiMo steel (G), Duplex (G1)

18

1.1

d8

Operating range (see note on page 1)

Shaft diameter: d1 = 14200 mm (0.55"7.87")
Pressure:
p1 = 80bar (1.160 PSI) for d1 = 14100 mm,
p1 = 25bar (363 PSI) for d1 = 100200 mm,
p1 = 16bar (232 PSI) for d1 >200 mm
Temperature: t = 50C+220C
(58F+428F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement:
d1 up to 100 mm: 0.5 mm
d1 from 100 mm: 2.0 mm

Standards and approvals

EN 12756

1)

Advantages
Efficient stock keeping due to easily interchangeable
faces
Extended selection of materials
Flexibility in torque transmissions
Insensitive to low solids contents
EN 12756
(For connection dimensions d1 up to 100 mm (3.94"))

* Cannot be combined with seal face in S

( >100 = h8 )

20

0,05

ds

Dimensions in mm
d1
14
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200

d2
18
20
22
24
26
28
30
33
35
38
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100
105
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210

d3
33
35
37
39
41
43
45
48
50
55
55
57
60
62
65
67
70
72
79
81
84
86
89
91
99
104
109
114
119
124
129
148
153
158
163
168
173
178
183
191
196
201
206
211
216
221
226
231
236
245
250

d6
21.0
23.0
27.0
29.0
31.0
33.0
34.0
37.0
39.0
42.0
42.0
44.0
49.0
51.0
54.0
56.0
59.0
62.0
65.0
67.0
70.0
72.0
75.0
77.0
83.0
88.0
95.0
100.0
105.0
110.0
115.0
122.2
128.2
136.2
138.2
142.2
146.2
152.2
156.2
161.2
168.2
173.2
178.2
183.2
188.2
193.2
207.5
212.5
217.5
222.5
227.5

H74F D EahleBurgmann
d7
d8
d11

25.0
27.0
33.0
35.0
37.0
39.0
40.0
43.0
45.0
48.0
48.0
50.0
56.0
58.0
61.0
63.0
66.0
70.0
73.0
75.0
78.0
80.0
83.0
85.0
92.0
97.0
105.0
110.0
115.0
120.0
125.0
134.3
140.3
148.3
150.3
154.3
158.3
164.3
168.3
173.3
180.3
185.3
190.3
195.3
200.3
205.3
219.3
224.3
229.3
234.3
239.3

3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

24.0
29.5
29.5
32.0
32.0
36.0
39.2
42.2
44.2
46.2
49.2
52.2
53.3
55.3
59.7
60.8
63.8
66.5
69.5
71.5
74.5
76.5
82.7
83.0
90.2
95.2
100.2
105.2
111.6
114.5

d12
30.0
35.0
35.0
38.0
38.0
42.0
45.0
48.0
50.0
52.0
55.0
58.0
62.0
64.0
68.4
69.3
72.3
75.4
78.4
80.4
83.4
85.4
91.5
92.0
99.0
104.0
109.0
114.0
120.3
123.3

ds

42
44
45
47
49
51
54
59
59
61
65
66
69
71
75
76
83
85
88
95
93
95
105
109
114
119
124
129
134
153
158
163
168
173
178
183
188
196
201
206
211
216
221
226
231
236
241
250
255

l1
73.0
73.0
76.0
76.0
76.0
77.0
77.0
77.0
77.0
79.0
79.0
80.0
85.0
85.0
85.0
84.0
84.0
93.0
97.0
97.0
104.0
104.0
109.0
98.0
112.5
112.5
112.5
112.5
112.5
110.5
110.5
122.0
122.0
122.0
122.0
122.0
122.0
122.0
122.0
133.0
137.0
141.0
141.0
141.0
141.0
141.0
149.0
149.0
149.0
151.0
151.0

( >100 0,1)

0,5

Product variant
H74F-D
Dimensions, items and descriptions as for H74-D, but with pumping screw.
Dependent on direction of rotation.

l2
18
18
20
20
20
20
20
20
20
20
20
20
23
23
23
23
23
25
25
25
25
25
25
25
28
28
28
28
28
28
28
32
32
32
32
32
32
32
32
34
36
38
38
38
38
38
42
42
42
43
43

l3
53.0
53.0
53.0
53.0
53.0
54.0
54.0
54.0
54.0
56.0
56.0
57.0
57.0
57.0
57.0
56.0
56.0
63.0
67.0
67.0
74.0
74.0
79.0
68.0
76.4
76.4
76.0
76.0
76.0
76.0
76.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
82.0
93.0
93.0
93.0
93.0
93.0
93.0
93.0
93.0
93.0
93.0
95.0
95.0

l4
26.5
26.5
26.5
26.5
26.5
27.0
27.0
27.0
27.0
28.0
28.0
28.5
28.5
28.5
28.5
28.0
28.0
31.5
33.5
33.5
37.0
37.0
39.5
34.0
38.2
38.2
38.0
38.0
38.0
38.0
38.0
41.0
41.0
41.0
41.0
41.0
41.0
41.0
41.0
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
47.5
47.5

l5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

l6
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12

l7
8.5
8.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0

l8
17.5
17.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
32.0
34.0
34.0
34.0
34.0
34.0
38.0
38.0
38.0
38.0
38.0

l9
10.0
10.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
22.0
24.0
24.0
24.0
24.0
24.0
28.0
28.0
28.0
28.0
28.0

l10
7.5
7.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
10.0
10.0
10.0
10.0
10.0
10.5
12.0
12.0
12.0
12.0
12.0
12.0
12.5
12.5
12.5
13.0
15.0
15.0
15.0
15.0

l12
6.5
8.5
9.0
8.5
8.5
8.5
8.5
10.0
11.5
11.5
12.0
12.0
11.3
11.8
13.2
12.8
12.8
12.8
13.5
14.5
14.5
14.5
14.2
14.2
14.9
14.2
15.2
16.2
16.0
16.0
17.0
17.0

l14
5.6
7.5
8.0
7.5
7.5
7.5
7.5
9.0
10.5
10.5
10.5
11.0
10.3
10.8
12.0
11.6
11.6
11.6
12.3
13.3
13.3
13.3
13.3
13.0
13.7
13.0
14.0
15.0
14.8
14.8
15.8
15.8

l15
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

l16
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

l28
6.6
6.6
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.5
11.0
11.0
11.0
11.0
11.0
11.0
11.3
11.3
11.3
12.0
14.0
14.0
14.0
14.0

l 31
17.0
17.0
17.0
17.0
17.0
17.5
17.5
17.5
17.5
18.5
18.5
19.0
19.0
19.0
19.0
19.5
19.5
19.5
23.5
23.5
24.5
24.5
24.5
23.5
25.5
25.5
25.0
25.5
25.0
25.0
25.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5

mx
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10

R
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

19

Mechanical seals Mechanical seals for pumps Pusher seals

EK700
l
l2

l1

0,3

0.05

1.1

1.2

1.8

1.3 1.4 1.5 1.7

Features
Single seal
Balanced
Independent of direction of rotation
Stationary multiple springs
Advantages
Unitized construction allows easy conversion
Springs located on the atmospheric side, no clogging
High precision rotating assembly reduces swashing of
seal head

Recommended applications
Chemical industry
Refining technology
Petrochemical industry
Lubrication oil
Light oil
Gasoline
Naphtha
Water
Process pumps

Operating range (see note on page 1)

Pressure: p =35bar (508 PSI)
Temperature: t = 160C (320F)
Sliding velocity: vg = 30 m/s (98 ft/s)
Viscosity:0.5 Pas
Solids content:0.5 %
Materials
Seal face: High density carbon graphite
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V)
Metal parts: 1.4401 (G)
Dimensions in mm
d
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150

20

d1
18
23
28
33
38
43
48
53
58
63
68
73
78
83
88
93
98
110
120
130
140
150

d2
42
47
53
58
66
71
76
81
91
96
101
110
115
120
125
130
135
145
160
170
185
200

d3
33
39
44
49
57
60
67
72
79
86
92
99
102
108
115
118
124
134
147
157
172
184

d4
36
41
46
51
60
65
70
75
85
90
95
104
109
114
119
124
129
139
150
160
175
190

l
63
65
66
66
68
68
68
69
72.5
77
79.5
79.5
79.5
80.5
81.5
81.5
81.5
84.5
91
96
98
100

l1
23
24
24
24
24
24
24
25
27.5
29
28.5
28.5
28.5
28.5
29.5
29.5
29.5
29.5
34
37
38
38

l2
40
41
42
42
44
44
44
44
45
48
51
51
51
52
52
52
52
55
57
59
60
62

l3
30
30
30
30
31
31
31
31
31
31
32
32
32
33
33
33
33
36
38
40
40
42

Item Description
1.1
Seal face
1.2, 1.8, 4, 5 O-Ring
1.3
Housing
EK700 EagleBurgmann
1.4
Thrust ring
1.5
Spring
1.6
Thrust ring
1.7, 6
Set screw
2
Seat
3
Drive collar

H7

d2

1.6
max

d1

h7

d3

6
d

d4

H11

l3

Mechanical seals Mechanical seals for pumps Pusher seals

Pulace
l

l1

0,3

Features
Single seal
Balanced
Independent of direction of rotation
Stationary multiple springs
Springs and pins not in contact with the medium
Advantages
Stationary seat and/or seal face replaceable
Can be adopted under positive pressure or under back
pressure
Operation in vacuum without additional seat locking
possible
Operating range (see note on page 1)
Pressure: p = 10bar (145 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Viscosity:100 Pas
Solids content:20 %
Materials
Seal face and seat: Silicon carbide (Q1),
Tungsten carbide (U7)
Metal parts: 1.4401 (G)
Secondary seals: EPDM (E)
Dimensions in mm
d
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

d1
46
51
56
62
69
78
78
86
91
97
102
107
112
118
128
128
135

d2
51
58
63
68
76
83
86
92
98
102
109
114
119
124
137
137
144

d3
57
64
69
74
82
89
92
98
104
108
115
120
125
130
143
143
150

l
71
71
71
75
80
80
80
80
78
81
80
82
82
85
85
85
85

2.2

1.2 1.4

1.6

1.5 1.7

H7

1.8
d3

1.3

H11

3 5

2.1 1.1

d2

2.3

h7

6
d

d1

d2

H11

20 0,05

10

Recommended applications
Sugar industry
Pulp and paper industry
Highly concentrated black water
Green water
White water
Pulp suspensions
Chemical solutions
Alkaline solutions
Slurries
Highly viscous liquids
Raw sludge pumps
Thick juice pumps
Conveying and bottling of dairy products

Item Description
Seal face
1.2, 1.4, 1.7, 2.2, 4, 5 O-Ring
1.3
Retainer
1.5
Adapter
1.6
Spring
1.8
Drive screw
2.1
Seat
2.3
Retainer
3
Drive collar
6
Set screw

L9UC EagleBurgmann
1.1

l1
34
34
34
37
38
38
38
38
37
38
38
39
40
40
42
42
42

21

Mechanical seals Mechanical seals for pumps Pusher seals

HRN
l 1k

l3
f

Advantages
Spring unit averted from the product so no sticking and
clogging of the springs
Safe operation (no fractures) because of seal face
locking by square pin
Suitable for pressure reversals
Operation in vacuum without additional seat locking
possible
No damage of the shaft by a dynamically loaded O-Ring
Small installation sizes
Best suitable for conversions, no adaptations of the pump
Insensitive to solid containing and abrasive media
Advantages of a balanced seal even with plain shafts
Insensitive to shaft movements because of the stationary
design
Operating range (see note on page 1)
Shaft diameter: d = 18100 mm (0.71"3.94")
Pressure: p1* = 25bar (363 PSI)
Temperature: t = 40C+220C
(40F+428F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement: 1.0 mm

* Additional seat locking is not needed in vacuum operation.

* For operation under vacuum it is necessary to arrange for
quenching on the atmosphere side.

22

1.2

1.4

20

l5

H8

1.5

d7

Features
Single seal
Balanced
Independent of direction of rotation
Stationary springs
Dual seals in tandem as well as back-to-back
arrangements (also in combination with H10 seal)

1.3

1.1

H11

h6

d1

d3

d 10

d6

mx

d8
l6

Materials
Item Part no. to DIN 24250
HRN EagleBurgmann
Seal face: Carbon graphite resin impregnated (B),
1.1 472
Silicon carbide (Q1)
1.2 412.1
Seat: Silicon carbide (Q1)
1.3 485
Secondary seals: FKM (V), NBR (P), FFKM (K), PTFE (T)
1.4 477
Springs: Hastelloy C-4 (M)
1.5 412.2
2
475
Metal parts: CrNiMo steel (G)
3
412.3
Standards and approvals
4
485
5
412.4
EN 12756
6
904
Recommended applications
Pulp and paper industry
Water and waste water technology
Dirty, abrasive and solid containing media
Fugitive hydrocarbons (no API seal!)
Sticky and stringy media
Chemical standard pumps
Sewage pumps

Description
Seal face
O-Ring
Retainer
Spring
O-Ring
Seat
O-Ring
Drive collar
O-Ring
Set screw

Dimensions in mm

d1
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100

d3
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125

d6
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115

d7
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125

d8
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

d10
34.7
36.7
38.7
40.7
41.7
44.7
46.7
49.7
49.7
51.7
57.7
59.7
62.7
64.7
67.7
71.7
74.7
76.7
80.5
82.5
85.5
87.5
92.5
94.5
100.5
108.5
113.5
118.5
123.5
128.5

I1k
37.5
37.5
37.5
40
40
42.5
42.5
42.5
42.5
42.5
45
45
45
45
45
47.5
47.5
47.5
52.5
52.5
52.5
52.5
52.5
60
60
60
60
65
65
65

I3
19.5
19.5
19.5
20.5
20.5
21.5
21.5
21.5
21.5
21.5
24
24
24
24
24
25
25
25
28
28
28
28
28
34
34
34
34
39
39
39

I5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3

I6
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7

f
3
3
3
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
10
10
10

mx
4
4
4
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8

23

Mechanical seals Mechanical seals for pumps Pusher seals

H75VN
l4
l5
( l6 )

l7

l11

1.1.4

1.1.6 1.1.5 1.1.3

1.1.1
2

1.2
5 1.3

13

12

d6

1.1.2 1.1.7

d3

h6

d1

d5

H7

d2

d4

11
10

Features
Single seal
Cartridge unit available
Design acc. to API 682/ISO 21049
Category 2 and 3, Type A, Arrangement 1
Independent of direction of rotation
Rotating multiple springs
Integrated pumping device available (H75VP)
Advantages
Low-Emission-Seal acc. to the American STLE-limits
Universally applicable both for retrofits or original
equipment
Efficient stock-keeping due to standardized components
Extended selection of materials
Extended field of operation in terms of temperature and
pressure
Metal parts also in special materials available
Operating range (see note on page 1)
Shaft diameter: d = 20110 mm (0.79"4.33")*
Pressure: p1 = 40bar (580 PSI)
Temperature: t = 40C+220C
(40F+428F)
Sliding velocity: vg = 23 m/s (75 ft/s)
Axial movement: 2.04.0 mm depending on diameter
and installation situation

* Other sizes on request

Materials
Item
Description
APIH75VN
Seal face: Carbon graphite antimony impregnated
(A) EagleBurgmann
1.1.1
Seal face
Seat: Silicon carbide (Q1, Q2)
1.1.2
Drive collar
Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K) 1.1.3
Thrust ring
Springs: Hastelloy C-4 (M)
1.1.4, 1.3
O-Ring
1.1.5
Sleeve
Metal parts: CrNiMo steel (G), Duplex (G1)
1.1.6
Spring
Hastelloy C-4 (M)
1.1.7, 13
Set screw
Standards and approvals
1.2
Seat
2
Shaft sleeve
API 682/ISO 21049
4
Housing
Recommended applications
5
Insert
7
Throttle ring
Process industry
9
Washer
Oil and gas industry
10
Assembly fixture
Refining technology
11
Hexagon bolt
Petrochemical industry
12
Set ring
Power plant technology
Hot water
Product variants
Light hydrocarbons
API 610/ISO 13709 pumps
H75VP
Process pumps
Dimensions, items and descriptions as H75VN, but with
pumping ring. Shorter installation length possible.
H75N
Dimensions, items and descriptions as H75VN.
Seal face: Silicon carbide (Q1, Q2)
Seat: Silicon carbide (Q1, Q2)

24

Dimensions in mm
API/d1
20
30
40
50
60
70
80
90
100
110

API/d2
70
80
90
100
120
130
140
160
170
180

API/d 3
105
115
125
140
160
170
180
205
215
225

Dimensions in inch

API/d1
0.787
1.181
1.575
1.969
2.362
2.756
3.15
3.543
3.937
4.331

API/d2
2.756
3.15
3.543
3.937
4.724
5.118
5.512
6.299
6.693
7.087

API/d 3
4.134
4.528
4.921
5.512
6.299
6.693
7.087
8.071
8.465
8.858

API/d 4
85
95
105
115
135
145
155
175
185
195

d5
50
62
72
86
99
109
119
129
153
168

d6
138
148
158
168
188
198
208
238
248
258

l4
95
100.5
105.5
111.5
120.5
124.5
129
129
133
133

l5
94
98
98.5
99.5
102
106
106
106
109
109

l(6)
1
2.5
7
12
18.5
18
23
23
24
24

l7
76
77
77.5
78.5
81
81
81
81
81
81

l11
6
6
6
6
6
6
6
6
6
6

Overall length
100
104
125
140
160
170
180
205
215
225

API/d 4
3.346
3.74
4.134
4.528
5.315
5.709
6.102
6.89
7.283
7.677

d5
1.969
2.441
2.835
3.386
3.898
4.291
4.685
5.079
6.024
6.614

d6
5.433
5.827
6.22
6.614
7.402
7.795
8.189
9.37
9.764
10.157

l4
3.74
3.957
4.154
4.39
4.744
4.902
5.079
5.079
5.236
5.236

l5
3.701
3.858
3.878
3.917
4.016
4.173
4.173
4.173
4.291
4.291

l(6)
0.039
0.098
0.276
0.472
0.728
0.709
0.906
0.906
0.945
0.945

l7
2.992
3.031
3.051
3.091
3.189
3.189
3.189
3.189
3.189
3.189

l11
0.236
0.236
0.236
0.236
0.236
0.236
0.236
0.236
0.236
0.236

Overall length
3.937
4.094
4.921
5.512
6.299
6.693
7.087
8.071
8.465
8.858

25

Mechanical seals Mechanical seals for pumps Pusher seals

H75VK
l4
l6

l5
l7

l 10
LBO
6

Features
Dual seal
Cartridge unit
Design acc. to API 682/ISO 21049
Category 2 and 3, Type A, Arrangement 2 or 3
Bi-directional design available
Rotating multiple springs
Integrated pumping device
Suitable for pressure reversals
Advantages
Universally applicable both for retrofits or original
equipment
Efficient stock-keeping due to standardized components
Extended selection of materials
Extended field of operation in terms of temperature and
pressure
Metal parts also in special materials available
Safe operation due to metal torque transmission at the
rotating seal face
Operating range (see note on page 1)
Shaft diameter: d = 20110 mm (0.79"4.33")*
Pressure: p1 = 40bar (580 PSI)
Temperature: t = 40C+220C
(40F+428F)
Sliding velocity: vg = 23 m/s (75 ft/s)
Axial movement: 2.04.0 mm depending on diameter
and installation situation

* Other sizes on request

Materials
Seal face: Carbon graphite antimony impregnated (A),
Silicon carbide (Q1, Q2)
Seat: Silicon carbide (Q1, Q2)
Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K)
Springs: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), Duplex (G1)
Hastelloy C-4 (M)
Standards and approvals
API 682/ISO 21049

26

4 2.1.2

1.3 8

2.1.6 2.1.5

1.1.3 1.1.1 1.2

1.1.6 1.1.5

1.1.4

2.1.4 2.1.1 2.2

2.1.3

2.3

12 16

15

11

LBI

Item Description
1.1.1, 2.1.1
Seal face
1.1.2, 2.1.2
Drive collar
1.1.3, 2.1.3
Thrust ring
1.1.4, 2.1.4, 1.3, 2.3 O-Ring
1.1.5, 2.1.5
Sleeve
1.1.6, 2.1.6
Spring
1.1.7, 16
Set screw
1.2, 2.2
Seat
3
Shaft sleeve
4
Key
6
Retainer
8
Washer
9
Pin
11
Housing
12
HSH Cap screw
13
Assembly fixture
14
Hexagon bolt
15
Set ring

Recommended applications
Oil and gas industry
Refining technology
Petrochemical industry
Power plant technology
APIH75VKD EagleBurgmann
Light volatile and highly viscous hydrocarbons
API 610/ISO 13709 pumps
Process pumps

d6

1.1.7 1.1.2

d3

h6

d1

d5

H7

d2

d4

14
13

Product variant
H75VKP-D
Dual seal in back-to-back arrangement. Suitable for
API 610 table 6 seal chambers.

6
5

7
4

3
5

3
9

d6

d4

d3

H7

h6

d1

d2

d4

LBO

LBI

Dimensions in mm
API/d1
20
30
40
50
60
70
80
90
100
110

API/d2
70
80
90
100
120
130
140
160
170
180

API/d 3
105
115
125
140
160
170
180
205
215
225

API/d 4
85
95
105
115
135
145
155
175
185
195

d5
60
70
82
94
114
124
134
146
163
173

d6
l4
l5
l6
129 APIH75VKPD
144 EagleBurgmann
97
47
139
145.5
96
49.5
149
146.5
96.5
50
168
158
106.5
51.5
188
165
107.5
57.5
198
170
107.5
62.5
208
175
107.5
67.5
238
178.8
116.9
61.9
248
185
117.5
67.5
258
188
116.5
71.5

l7
81
77.5
78
88
90.2
85
85
94.4
92
91

l10
6
8
8
10.5
4.5
10
12.5
6.9
11.5
15.5

Axial movement
2.00
2.00
2.00
2.00*
2.00*
2.00*
2.00*
3.00
2.00*
3.00

l7
3.189
3.051
3.071
3.465
3.551
3.346
3.346
3.717
3.622
3.583

l10
0.236
0.315
0.315
0.413
0.177
0.394
0.492
0.272
0.453
0.61

Axial movement
0.079
0.079
0.079
0.079*
0.079*
0.079*
0.079*
0.118
0.079*
0.118

* For larger installation space an axial movement of 3.0 mm is possible

Dimensions in inch

API/d1
0.787
1.181
1.575
1.969
2.362
2.756
3.15
3.543
3.937
4.331

API/d2
2.756
3.15
3.543
3.937
4.724
5.118
5.512
6.299
6.693
7.087

API/d 3
4.134
4.528
4.921
5.512
6.299
6.693
7.087
8.071
8.465
8.858

API/d 4
3.346
3.74
4.134
4.528
5.315
5.709
6.102
6.89
7.283
7.677

d5
2.362
2.756
3.228
3.701
4.488
4.882
5.276
5.748
6.417
6.811

d6
5.079
5.472
5.866
6.614
7.402
7.795
8.189
9.37
9.764
10.157

l4
5.669
5.728
5.768
6.22
6.496
6.693
6.89
7.039
7.283
7.402

l5
3.819
3.780
3.799
4.193
4.232
4.232
4.232
4.602
4.626
4.587

l6
1.85
1.949
1.969
2.028
2.264
2.461
2.657
2.437
2.657
2.815

* For larger installation space an axial movement of 0.118" is possible

27

Mechanical seals Mechanical seals for pumps Pusher seals

HJ92N
l1k
l3

l 7 +0,5
l19

f
mx

* An integral stationary seat lock is not needed within the

permissible low pressure range. For prolonged operation under
vacuum it is necessary to arrange for quenching on the
atmospheric side.

Materials
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
Seat G16: Silicon carbide (Q1)
Standards and approvals
EN 12756

20

l5

H8

d7

d8
l6

HJ92N EagleBurgmann
Recommended applications
Item
Pharmaceutical industry
1.1
Power plant technology
1.2
Pulp and paper industry
1.3
Water and waste water technology
1.4
Mining industry
1.5
Food and beverage industry
1.6
Sugar industry
2
Contaminated, abrasive and solids containing media
3
Thick juice (70 ... 75 % sugar content)
Raw sludge, sewage slurries
Raw sludge pumps
Thick juice pumps
Conveying and bottling of dairy products

Product variants
HJ927GN
Items and description as HJ92N.
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
Seat G46: Silicon carbide (Q12)
Installations length l11 (= l3 + l39) is longer than l1k.

H11

l18

1.3

Features
For unstepped shafts
Single seal
Balanced
Independent of direction of rotation
Encapsulated rotating spring

Operating range (see note on page 1)

Shaft diameter: d1 = 18100 mm (0.71"4")
Pressure: p1* = 0.8 abs25bar (12 abs.363 PSI)
Temperature: t = 50C+220C
(58F+430F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement: 0.5 mm.

d6

1.2

Advantages
Especially designed for solids containing and highly
viscous media
Springs are protected from the product
Rugged and reliable design
No damage of the shaft by dynamically loaded O-Ring
Universal application
Variant for operation under vacuum available
Variant for sterile operation available

1.1

h6

1.5

d1

1.4

dm

d3

1.6

Part no. to DIN 24250

472/473
485
412.2
412.1
477
904
475
412.3

Description
Seal face
Drive collar
O-Ring
O-Ring
Spring
Set screw
Seat (G16)
O-Ring

HJ977GN
Items and description as HJ92N.
Seal face: Silicon carbide (Q12)
Seat G46: Silicon carbide (Q12)
Installation length l1k
Operating range:
Temperature: t = 20C+180C (4F+356F)
Sliding velocity: vg = 10 m/s (33 ft/s)

HJ97GN5
Items and description as HJ92N.
Seal face: Silicon carbide (Q12)
Seat G16: Silicon carbide (Q1)
Installations length l12 (= l13 + l19) is shorter than l1k.

HJ4
Mechanical seals with product-protected multiple springs,
for high pressure applications.
Pressure: p = max. 50bar (725 PSI)
Shaft diameter: d1 >100 mm (3,94")
Smaller diameters and higher pressure on request.
l1k

l 11

l38

l 38
l3

l 39

HJ927GN EagleBurgmann

HJ927GN

l13

l39

HJ977GN EagleBurgmann

HJ977GN

1.6
1.2

1.1

1.4
1.3

1.5

HJ4 ... (example)

HJ4 EagleBurgmann

28

Dimensions in mm
d1
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100

d3
32
34
36
38
39
42
44
47
47
49
54
56
59
61
64
66
69
71
78
80
83
85
88
90
99
104
109
114
119
124

d6
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115

d7
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125

d8
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

dm
l1k
26.0 37.5
28.0 37.5
30.0 37.5
32.5 40.0
33.5 40.0
36.5 42.5
38.5 42.5
41.5 42.5
41.5 42.5
43.5 42.5
47.5 45.0
49.5 45.0
52.5 45.0
54.5 45.0
57.5 45.0
59.5 47.5
62.5 47.5
64.5 47.5
68.5 52.5
70.5 52.5
73.5 52.5
75.5 52.5
78.5 52.5
80.5 60.0
89.0 60.0
94.0 60.0
99.0 60.0
104.0 65.0
109.0 65.0
114.0 65.0

l3
30.5
30.5
30.5
33.0
33.0
35.5
35.5
35.5
35.5
35.5
37.0
37.0
37.0
37.0
37.0
38.0
38.0
38.0
42.0
42.0
42.0
42.0
41.5
48.5
48.5
48.5
48.5
52.0
52.0
52.0

l5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l6
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7

l7
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

l18
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
16.0
16.0
17.0
17.0
17.0
18.0
18.0
18.0
18.0
18.5
19.0
19.0
19.0
19.0
20.5
20.5
20.5

l19
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
8.0
8.0
8.0
8.0
8.0
9.5
9.5
9.5
10.5
10.5
10.5
10.5
11.0
11.5
11.5
11.5
11.5
13.0
13.0
13.0

l11
39.5
39.5
39.5
42.0
42.0
45.0
45.0
45.0
45.0
45.0
47.5
47.5
47.5
47.5
47.5
50.0
50.0
50.0
55.0
55.0
55.0
55.0
55.0
62.5
62.5
62.5
62.5
67.5
67.5
67.5

l12
35.5
35.5
35.5
38.0
38.0
40.0
40.0
40.0
40.0
40.0
42.5
42.5
42.5
42.5
42.5
45.0
45.0
45.0
50.0
50.0
50.0
50.0
50.0
57.5
57.5
57.5
57.5
62.5
62.5
62.5

l13
28.5
28.5
28.5
31.0
31.0
33.0
33.0
33.0
33.0
33.0
34.5
34.5
34.5
34.5
34.5
35.5
35.5
35.5
39.5
39.5
39.5
39.5
39.0
46.0
46.0
46.0
46.0
49.5
49.5
49.5

l 38
17.0
17.0
17.0
17.0
17.0
17.5
17.5
17.5
17.5
17.5
18.5
18.5
18.5
18.5
18.5
19.5
19.5
19.5
20.5
20.5
20.5
20.5
21.0
21.5
21.5
21.5
21.5
23.0
23.0
23.0

l 39
9.0
9.0
9.0
9.0
9.0
9.5
9.5
9.5
9.5
9.5
10.5
10.5
10.5
10.5
10.5
12.0
12.0
12.0
13.0
13.0
13.0
13.0
13.5
14.0
14.0
14.0
14.0
15.5
15.5
15.5

3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4.0
4.0
4.0
4.0
4.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.0
5.5
5.5
5.5
5.5
5.5
5.5

mx
M4
M4
M4
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8

29

Mechanical seals Mechanical seals for pumps Pusher seals

H12N
l1

l9

20

Features
For Stepped shafts
Single seal
Balanced
Dependent of direction of rotation
Torque transmission via conical spring
Advantages
High flexibility due to extended selection of materials
Insensitive to low solids contents
Short Installation length possible (G16)
Economical balanced seal
Seat cooling for hot water applications available (G115)
No damage of the shaft by set screws
Operating range (see note on page 1)
Shaft diameter d1 = 1080 mm (0.4"3.125")
Pressure: p1 = 25bar (363 PSI)
Temperature: t = 50C+220C
(58F+430F)
Sliding velocity: vg = 15 m/s (50 ft/s)
Axial movement: 1.0 mm
Materials
Seal face: Carbon graphite antimony impregnated (A)
Seat G9: Silicon carbide (Q1), Special cast CrMo steel (S)
Standards and approvals
EN 12756
Recommended applications
Chemical industry
Pulp and paper industry
Water and waste water technology
Low solids content media (H17GN)
Hot water
Chemical standard pumps
Water and sewage pumps

3
l1N

Item
1.1
1.2
1.3
1.4
1.4
2
3

Part no. to DIN 24250

472/473
412.1
474
478
479
475
412.2

l5

H8

d7

h6

l8

R1
,6

H11

3
d6

1.1

d1

1.3 1.2

d2

min

db

d3

1.4

10

l3

d8
l6

l2

l7

+0,5

Description
Product variants
HN12 EagleBurgmann
Seal face
H12
O-Ring
Dimensions, items and descriptions as for H12N, but with
Thrust ring
seat G16.
Righthand spring
Lefthand spring
Seal face: Carbon graphite antimony impregnated (A)
Type G9 stationary seat Seat G16: Silicon carbide (Q1), Special cast
O-Ring
CrMo steel (S), Aluminium oxide (V)
H17GN
Dimensions, items and descriptions as for H12N,
but with shrink-fitted seal face (Q12)
(Item no. 1.1).
Temperature: t = 20C+180C (4F+356F)
Seal face: Silicon carbide (Q12)
Seat G9: Silicon carbide (Q1, Q2),
Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
H17G
Dimensions, items and descriptions as for H12N, but
with shrink-fitted seal face (Q12) and seat G16.
Temperature: t = 20C+180C (4F+356F)
Seal face: Silicon carbide (Q12)
Seat G16: Silicon carbide (Q1)

l9
l8

l3

H17GN

H17GN EagleBurgmann

30

Seat alternatives
l 40

H8

d7

4,1

G115
Cooled seat especially for hot
water applications. In this case,
the dimensions of the H12N
rotating unit are modified.
Seal designation: H127G115.
Please inquire.

h1

l18

15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
17
17
17
18
18
18
18
19
19
19

l19

7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
9.5
9.5
9.5
10.5
10.5
10.5
10.5
11.5
11.5
11.5

d1

H11

l 18

d6

l 19

a
+0,1

d 22 0,05

G16 (EN 12756 but l1k

and l2 are shorter than
specified)

d 21 +0,1

l6

20

l5

G16 EagleBurgmann

h2
l 39

Dimensions in mm

d1
10
12
14
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
70
75
80

d2
14
16
18
20
22
24
26
28
30
33
35
38
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85

d3
24
26
31
34
36
38
40
42
44
47
49
54
54
56
59
61
64
66
69
71
78
79
83
85
88
90
98
103
109

d6
17
19
21
23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
83
88
95

d7
21
23
25
27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
92
97
105

d8
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

d21

44.65
47.83
47.83
47.83
51.00
54.18
60.53
63.70
63.70
66.88
70.05
76.40
76.40
79.58
82.75
85.93
85.93
89.10
98.63
101.80

d22

50.57
53.75
53.75
53.75
56.92
60.10
66.45
69.62
69.62
72.80
75.97
82.32
82.32
85.50
88.67
91.85
91.85
95.02
104.55
107.72

db
18
21
23
26
28
30
31
35
37
40
43
45
45
49
52
55
58
61
64
66
69
71
74
77
80
83
88
93
98

l1N
50
50
55
55
55
60
60
60
60
65
65
65
65
65
75
75
75
75
85
85
85
85
85
95
95
95
95
105
105

l1
35.5
36.5
39.5
41.0
44.0
44.0
44.0
44.0
45.0
47.0
47.0
51.0
51.0
55.0
60.0
62.0
65.0
69.0
69.0
73.0
75.0
75.0
75.0
75.0
75.0
76.0
81.0
86.0
86.0

l2
18
18
18
18
20
20
20
20
20
20
20
20
20
20
23
23
23
23
23
25
25
25
25
25
25
25
28
28
28

l3
25.5
26.5
29.5
31.0
32.5
32.5
32.5
32.5
33.5
35.5
35.5
39.5
39.5
43.5
46.0
48.0
51.0
55.0
55.0
58.0
60.0
60.0
60.0
60.0
60.0
61.0
63.0
68.0
68.0

l5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0

l6 l7
l8
l9
4 G115
8.5 EagleBurgmann
17.5
10.0
4
8.5
17.5
10.0
4
8.5
17.5
10.0
4
8.5
17.5
10.0
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
5
9.0
19.5
11.5
6
9.0
22.0
14.0
6
9.0
22.0
14.0
6
9.0
22.0
14.0
6
9.0
22.0
14.0
6
9.0
22.0
14.0
6
9.0
23.0
15.0
6
9.0
23.0
15.0
6
9.0
23.0
15.0
6
9.0
23.0
15.0
6
9.0
23.0
15.0
6
9.0
23.0
15.0
6
9.0
23.0
15.0
7
9.0
26.0
18.0
7
9.0
26.0
18.0
7
9.0
26.2
18.2

l 39

24.0
24.5
24.5
24.5
24.5
26.0
26.0
26.0
26.0
26.0
26.5
26.5
28.5
28.5
28.5
28.5
28.5
30.5
30.5
30.2

l 40

8.5
9.0
9.0
9.0
9.0
11.0
11.0
11.0
11.0
11.0
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14.5
14.5
14.0

24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0

b
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
10
10

8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0

h1

6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6

h2

22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
22.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6

9
9
9
9
9
9
9
9
9
9
9
9
11
11
11
11
11
11
11
11

b*
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
7.5
7.5
8.0
7.5
8.0
8.0
(8)
8.0
8.0
8.0
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0

* l1N acc. to EN 12756 is exceeded

31

Mechanical seals Mechanical seals for pumps Pusher seals

H3B
9 min

0,5

1.1 2

l3

d4

n x d6

20

l4

Advantages
Excellent torque transmission due to clutch drive between
seal head and drive collar.
Operating range (see note on page 1)
Pressure: p = 12bar (174 PSI)
Temperature: t = 20C+160C (4F+320F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Viscosity:300 mPas
Solids content:7 %

Standards and approvals

ISO 3096
Recommended applications
Process industry
Oil and gas industry
High viscous media (tar, heavy oils)
Process pumps

Materials
Seal face and seat: Silicon carbide (Q1),
Tungsten carbide (U7)
Metal parts: 1.4401 (G)
Secondary seals: FKM (V)
Dimensions in mm
d
24
26
28
30
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100
105

32

d1
20
22
24
25
28
30
33
35
38
40
43
45
48
50
53
55
58
60
63
65
70
75
80
85
90
95
100

d2
38
40
42
44
47
49
54
56
59
61
64
66
69
71
76
78
81
84
87
90
95
100
107
112
119
124
129

d3
40
42
44
46
49
51
58
60
63
65
68
70
73
75
83
85
88
90
93
95
104
109
114
119
124
129
134

d4
29
31
33
34
37
39
42
44
50
52
55
57
60
62
65
67
70
72
75
77
83
88
96
101
106
111
116

l5

Features
Single Seal
Balanced
Independent of direction of rotation

d5
35
37
39
40
43
45
48
50
56
58
61
63
66
68
71
73
79
81
84
86
92
97
105
110
115
120
125

d6
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

l
62
62
64
64
64
68
71
73
76
76
76
80
80
82
84
84
84
88
88
89
94
94
100
100
105
105
105

l1
49
49
51
51
51
55
58
60
61
61
61
65
65
65
68
68
68
72
72
73
75
75
81
82
87
87
87

l2
13
13
13
13
13
13
13
13
15
15
15
15
15
17
16
16
16
16
16
16
19
19
19
18
18
18
18

l3
42
42
44
44
44
48
51
53
53
53
53
57
57
57
59
59
59
63
63
64
66
66
72
72
77
77
77

l4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
7
7
7
7
7
7
7
7
7
7
7

l5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

Item Description
1.1 Seal face
1.2, 3 O-Ring
H3B EagleBurgmann
1.3 Spring
1.4 Drive collar
1.5 Set screw
2
Seat

H7

1.2

d5

1.3

30

1.4

l2

d1

h7

1.5

d2

d3

min

l1

H11

Mechanical seals Mechanical seals for pumps Pusher seals

H10/H8
l

0,1

H7

d3

1.2

d6

1.4

min

d5

d4

d1

1.3

+0,3

1.1

d2

l1

Features
Single seal
Balanced
Independent of direction of rotation
Stationary multiple springs
Advantages
Insensitive to solids in the medium
Very short axial installation length (analog lip seals)
combined with high pressurre capability
No damage of the shaft by dynamically loaded O-Ring
Due to the stationary design insensitive to shaft
misalignements
Compact ready-to-install unit

H10 EagleBurgmann

Item Part no. to DIN 24250

1.1 472

473
1.2 485
1.3
1.4 477
2
475
3
412.2

Description
Seal face
Seal face housing
Drive collar
O-Ring
Spring
Rotating seat*
O-Ring

Product variant
H8
Dimensions, items and decription as H10. Drive collars
and housings for item 1.2 are made of deep-drawn
stainless steel sheet.
l1

* The stationary seat design is chosen according to the specific

requirements and conditions of operation.

Operating range (see note on page 1)

Shaft diameter: d1 = 15100 mm (0.6"3.9")
Pressure: p1 = 25bar (363 PSI)
Temperature: t = 40C+180C
(40F+356F)
Sliding velocity: vg = 35 m/s (115 ft/s)

d2

1.2

Materials
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
Recommended applications
Process industry
Chemical industry
Water and waste water technology
Lube oils
Roller seal
Bearing seal
All seal chambers with a very short axial
installation length

Dimensions in mm

d1
d2
d2
d3
d4
15
16
17
42
22.6
18
19

45
25.6
20
21
22
48
27.6
22
23
24
50
29.6
25
26
27
52
32.8
28
29

55
35.8
30
31
32
58
37.8
32
33
34
60
39.8
35
36
37
62
42.8
38
39
40
65
45.9
40
41
42
68
47.9
42
43
44
72
49.9
45
46
47
75
52.9
48
49

80
55.9
50
51
52
80
58.2
52
53

82
60.2
55
56
57
85
63.2
58
59

90
66.7
60
61
62
90
68.7
65
66
67
95
73.7
68
69
70
100
76.7
70
71
72
100
78.7
75
76
77
108
83.7
80
81
82
112
88.7
85
86
87
118
93.7
90
91
92
122
99.5
95
96
97
128
104.5
100
101
102
132
109.5
Axial tolerances: l 0.5 H10, l 0.2 H8

d5
21
24
26
28
31
34
36
38
41
44
46
48
51
54
56
58
61
64
66
71
74
76
81
86
91
96
101
106

d6
34
37
40
42
44
47
50
52
54
57
60
64
67
72
72
74
77
82
82
87
92
92
100
104
110
114
120
124

l
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
19
19
19
19
19
19
19
19
19

l1
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5
16.5

l1
16

16
16
16

16
16
16
16
16
16
16

16

16

16
18
18
18
18
18
18
18
18
18

H8 EagleBurgmann

33

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Cartex Single seals

l1
l2

Cartex-SN

l4

l3

15

13
12

Operating range (see note on page 1)

Cartex-SN, -SNO, -QN, -TN, -Vario

Sliding face material combination BQ1

Pressure: p1 = 25bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)
Sliding face material combination Q1Q1 or U2Q1
Pressure: p1 = 12bar (174 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 1.0 mm, d1 75 1.5 mm

34

14 11

Item Description
45
45
1
Seal face
A
Cartex EagleBurgmann
2, 5, 7 O-Ring
3
Spring
4
Seat
6
Shaft sleeve
8
Drive collar
da
9
Set screw
10
Snap ring
11
Housing
12
Assembly fixture
13
Screw
14
Gasket
15
Screw plug
Machined cover version
16
Lip seal (-QN), throttle ring (-TN)
CARTEX_cover_mach EagleBurgmann
Materials
Seal face: Silicon carbide (Q1), Carbon graphite resin
impregnated (B), Tungsten carbide (U2)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K),
Perflourocarbon rubber/PTFE (U1)
Springs: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)
Recommended applications
Process industry
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Food and beverage industry
Sugar industry
Universally applicable
Centrifugal pumps
Eccentric screw pumps
Process pumps

45

45

da

a1

Shaft diameter:
d1 = 25100 mm (1.000"4.000")
Other sizes on request
Temperature: t = 40C+220C
(40F+428F)
(Check O-Ring resistance)

10

a1

Advantages
Ideal seal for standardizations
Universal applicable for packings conversions, retrofits or
original equipment
No dimensional modification of the seal chamber
(centrifugal pumps) necessary, small radial installation
height
No damage of the shaft by dynamically loaded O-Ring
Extended service life
Installation faults are avoided, cost-effective
No damage caused by dirt entered during assembly
Straightforward and easy installation due to
pre-assembled unit (reduced down-times)
Individual adaptation to pump design possible
Customer specific versions available

Features
Single seal
Cartridge
Balanced
Independent of direction of rotation
Single seals without connections (-SNO), with flush (-SN)
and with quench combined with lip seal (-QN) or throttle
ring (-TN)
Additional variants available for ANSI pumps
(e.g.-ABPN) and eccentric screw pumps (-Vario)

h6

5 4

d1

d2

d3

Cast cover versionCARTEX_cover_cast EagleBurgmann

Product variants
Cartex-SNO
Single seal without connections, for dead-end operation.

Cartex-QN
Single seal for operation with unpressurized quench. Same
as -SN version but with outboard lip seal (item 16). The
cover has auxiliary connections for flushing and quench.
Lip seal: NBR (P), PTFE carbon reinforced (T3)

Cartex-TN
Single seal, same as Cartex-SN but with throttle ring
(item16). The cover has auxiliary connections for flushing
and quench. Throttle ring: PTFE carbon-graphite reinforced.
l 15

l 12

l 13

l 15
l 16

l 17

l 14

l 17

l 16

15

Cartex-SNO
CARTEXSNO EagleBurgmann
Dimensions in
mm

d1
25
28
30
32
33
35
38
40
42
43
45
48
50
53
55
60
65
70
75
80
85
90
95
100

d2
43.0
46.0
48.0
49.8
49.8
53.0
56.0
58.0
60.5
60.5
62.5
65.6
68.0
72.0
73.0
78.0
84.8
93.0
100.0
106.4
109.5
115.9
119.1
125.4

d 3min.
44.0
47.0
49.0
51.0
51.0
54.0
57.0
59.0
61.5
61.5
64.0
67.0
69.0
73.0
74.0
79.0
85.7
95.0
101.6
108.0
111.1
117.5
120.7
127.0

Dimensions in inch

d1
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000
3.125
3.250
3.375
3.500
3.625
3.750
4.000

d2
1.693
1.811
1.969
2.087
2.205
2.344
2.461
2.583
2.677
2.835
2.961
3.071
3.213
3.339
3.661
3.937
3.937
4.189
4.189
4.311
4.437
4.563
4.689
4.937

d 3min.
1.750
1.850
2.008
2.126
2.244
2.375
2.520
2.638
2.717
2.875
3.000
3.110
3.250
3.338
3.740
4.000
4.000
4.252
4.252
4.374
4.500
4.626
4.752
5.000

Cartex-Vario
Cartridge seals with modified cover for eccentric screw
pumps.
For e.g. Seepex BN,
Netzsch NM S, NM B, NE (P),
Allweiler AE, AEB, AED,
Robbins & Myers/Moyno 2000 CC and Mono E-Range.
Please inquire.

15

16

16

Cartex-TN

Cartex-QN

CartexTN EagleBurgmann

CartexQN EagleBurgmann

d 3max.
51.5
52.0
56.0
57.0
57.0
61.5
66.0
68.0
69.5
70.5
73.0
75.0
78.0
87.0
83.0
91.0
98.5
108.0
118.0
124.0
128.0
135.0
138.0
144.0

l1
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
84
84
84
84
84
84

l2
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
57.4
57.4
57.4
57.4
57.4
57.4

l3
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
24.6
26.6
26.6
26.6
26.6
26.6
26.6

l4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
28.0
28.0
28.0
28.0
28.0
28.0

l12
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
46.1
46.1
46.1
46.1
46.1
46.1

l13
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
37.9
37.9
37.9
37.9
37.9
37.9

l14
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
22.0
22.0
22.0
22.0
22.0
22.0

l15
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
79.5
98.0
98.0
98.0
98.0
98.0
98.0

d 3max.
2.008
2.047
2.244
2.421
2.589
2.700
2.874
2.953
3.071
3.425
3.560
3.583
3.800
3.937
4.252
4.646
4.646
4.882
4.882
5.039
5.157
5.315
5.433
5.669

l1
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
2.640
3.307
3.307
3.307
3.307
3.307
3.307
3.307
3.307
3.307

l2
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
2.260
2.260
2.260
2.260
2.260
2.260
2.260
2.260
2.260

l3
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
1.047
1.047
1.047
1.047
1.047
1.047
1.047
1.047
1.047

l4
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.100
1.100
1.100
1.100
1.100
1.100
1.100
1.100

l12
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.815
1.815
1.815
1.815
1.815
1.815
1.815
1.815
1.815

l13
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.492
1.492
1.492
1.492
1.492
1.492
1.492
1.492
1.492

l14
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.689
0.866
0.866
0.866
0.866
0.866
0.866
0.866
0.866
0.866

l15
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130
3.130

3.858
3.858
3.858

3.858

Cartex-Vario

l16
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
63.9
63.9
63.9
63.9
63.9
63.9

l17
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
26.1
34.1
34.1
34.1
34.1
34.1
34.1

a1
62
62
65
67
67
70
75
75
80
80
81
84
87
97
90
102
109
118
129
135
139
145
148
154

da
105
105
105
108
108
113
123
123
133
133
138
138
148
148
148
157
163
178
190
195
198
205
208
218

s
13.2
13.2
13.2
13.2
13.2
13.2
13.2
14.2
14.2
14.2
14.2
14.2
14.2
18.0
18.0
18.0
18.0
18.0
18.0
18.0
22.0
22.0
22.0
22.0

l16
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102

2.516
2.516
2.516

2.516

l17
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028

1.343
1.343
1.343

1.343

a1
2.441
2.441
2.640
2.756
2.953
3.031
3.189
3.307
3.425
3.819
3.940
4.016
4.173
4.291
4.646
5.079
5.079
5.315
5.315
5.472
5.591
5.709
5.827
6.063

da
4.134
4.134
4.252
4.449
4.843
4.843
5.433
5.433
5.827
5.827
6.181
6.181
6.417
6.417
7.008
7.480
7.480
7.677
7.677
7.795
7.795
8.071
8.189
8.583

s
0.520
0.520
0.520
0.520
0.520
0.559
0.559
0.559
0.559
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.866
0.866
0.866
0.866
0.866

35

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Cartex Dual seals

l5
( l6 )

l7

Cartex-DN

l4
21
8
20

Operating range (see note on page 1)

Shaft diameter:
d1 = 25100 mm (1.000"4.000")
Other sizes on request
Temperature: t = 40C+220C
(40F+428F)
(Check O-Ring resistance)
Sliding face material combination BQ1
Pressure: p1 = 25bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)
Sliding face material combination Q1Q1 or U2Q1
Pressure: p1 = 20bar (290 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)
Barrier fluid circulation system:
p3max. = 25bar (363 PSI)
p (p3 - p1)ideal = 23bar (2944 PSI),
7bar (102 PSI) for barrier media with poor lubricating
properties
Pump startup:
p (p3 p1)max. = 25bar (363 PSI) allowed
Recommended supply medium: max. ISO VG 5
Axial movement: 1.0 mm, d1 = 75 mm 1.5 mm
36

10

9 15 14 17

d1

h6

2 11 3

12 13 16

Materials
Seal face: Silicon carbide (Q1), Carbon graphite resin
impregnated (B), Tungsten carbide (U2)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K),
Perfluorocarbon rubber/PTFE (U1)
Springs: Hastelloy (M)
Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)
Recommended seal supply
The EagleBurgmann QFT1000 buffer system and QFT2000
vessels are suitable for Cartex-DN in back-to-back
arrangement. The EagleBurgmann TS1016 and TS2000
thermosiphon systems support double and back-to-back
seal configurations.

Description
CartexDN EagleBurgmann
45
Seal face
45
IN
OUT
O-Ring
Spring
Seat
22
Shaft sleeve
Cover
21
da
Seal face
Spring
Seat
Drive collar
OUT
IN
Set screw
Snap ring
Assembly fixture (remove after
Cast cover version
installation)
CARTEX DN EagleBurgmann
HSH Cap screw
Version: Gussdeckel
Gasket
45
45
Screw plug
a2

Advantages
Ideal seal for standardizations
Universal applicable for packings conversions, retrofits
or OEM
No dimensional modification of the seal chamber
(centrifugal pumps) necessary, small radial installation
height
No damage of the shaft by dynamically loaded O-Ring
Extended service life
Installation faults are avoided, cost-effective
No damage caused by dirt entered during assembly
Straightforward and easy installation due to preassembled unit (reduced down-times)
Individual adaptation to pump design possible
Customer specific versions available

Item
1
2, 5, 7, 10, 13, 15
3
4
6
8
9
11
12
14
16
17
18

19
20, 22
21

5 4

OUT

IN

22
21

da

a2

IN

OUT

Features
Dual seal
Cartridge
Balanced
Independent of direction of rotation
Double pressure balanced
Integrated pumping device
Variants available: for eccentric screw pumps (-Vario)
and gas-lubricated version (-GSDN)

d2

d3

19
18

Machined cover version

CARTEX
DN EagleBurgmann
Recommended
applications
Version Drehdeckel
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Mining industry
Food and beverage industry
Sugar industry
Centrifugal pumps
Eccentric screw pumps
Universally applicable

Dimensions in mm

d1
25
28
30
32
33
35
38
40
42
43
45
48
50
53
55
60
65
70
75
80
85
90
95
100

d2
43.0
46.0
48.0
49.8
49.8
53.0
56.0
58.0
60.5
60.5
62.5
65.6
68.0
72.0
73.0
78.0
84.8
93.0
100.0
106.4
109.5
115.9
119.1
125.4

d 3min.
44.0
47.0
49.0
51.0
51.0
54.0
57.0
59.0
61.5
61.5
64.0
67.0
69.0
73.0
74.0
79.0
85.7
95.0
101.6
108.0
111.1
117.5
120.7
127.0

Dimensions in inch

d1
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000
3.125
3.250
3.375
3.500
3.625
3.750
4.000

d2
1.693
1.811
1.961
2.087
2.205
2.343
2.461
2.582
2.677
2.835
2.961
3.071
3.213
3.339
3.661
3.937
3.937
4.189
4.189
4.311
4.437
4.563
4.689
4.937

d 3min.
1.732
1.875
2.008
2.126
2.244
2.375
2.520
2.638
2.717
2.874
3.000
3.125
3.300
3.374
3.740
4.000
4.000
4.252
4.252
4.375
4.500
4.625
4.752
5.000

d 3max.
51.5
52.0
56.0
57.0
57.0
61.5
66.0
68.0
69.5
70.5
73.0
75.0
78.0
87.0
83.0
91.0
98.5
108.0
118.0
124.0
128.0
135.0
138.0
144.0

l4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
28.0
28.0
28.0
28.0
28.0
28.0

l5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
86.5
108.0
108.0
108.0
108.0
108.0
108.0

l6
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
63.9
63.9
63.9
63.9
63.9
63.9

l7
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
33.1
44.1
44.1
44.1
44.1
44.1
44.1

a2
62
61
67
70
70
72
75
77
80
80
82
85
87
97
92
102
109
118
129
135
139
145
148
154

da
105
105
105
108
108
113
123
123
133
133
138
138
148
148
148
157
163
178
190
195
198
205
208
218

s
13.2
13.2
13.2
13.2
13.2
13.2
13.2
14.2
14.2
14.2
14.2
14.2
14.2
18.0
18.0
18.0
18.0
18.0
18.0
18.0
22.0
22.0
22.0
22.0

d 3max.
2.008
2.050
2.244
2.421
2.598
2.700
2.874
2.953
3.071
3.425
3.560
3.583
3.800
3.937
4.252
4.646
4.646
4.882
4.882
5.039
5.157
5.315
5.433
5.669

l4
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.102

l5
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
3.400
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250

l6
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.102
2.516
2.516
2.516
2.516
2.516
2.516
2.516
2.516
2.516

l7
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.736
1.736
1.736
1.736
1.736
1.736
1.736
1.736
1.736

a2
2.440
2.402
2.760
2.840
2.950
3.090
3.230
3.350
3.430
3.819
3.940
4.020
4.180
4.303
4.660
5.079
5.079
5.315
5.315
5.472
5.591
5.709
5.827
6.063

da
4.134
4.134
4.330
4.449
4.843
4.842
5.433
5.433
5.827
5.827
6.181
6.181
6.417
6.417
7.008
7.480
7.480
7.677
7.677
7.795
7.795
8.071
8.189
8.583

s
0.520
0.520
0.520
0.520
0.520
0.559
0.559
0.559
0.559
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.709
0.866
0.866
0.866
0.866
0.866

37

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Cartex ANSI Single seals

l1
l2
l3

Cartex-ABPN

l4
15

10

h6

d1

min

d3

5 4

7
d2

max

d3

13
12

14 11

Features
Single seal
Available for standard (Cartex-ASPN) and big bore
(Cartex-ABPN) seal chambers
Cartridge
Balanced
Independent of direction of rotation
Single seals with flush (-ASPN, -ABPN) and with quench
combined with lip seal (-ASQN, -ABQN) or throttle ring
(-ASTN, -ABTN)

Operating range (see note on page 1)

Cartex-ASPN, - ABPN, -ASTN, -ABTN, -ASQN, -ABQN
Shaft diameter: d1 = 1.000"3.750"
Other sizes on request
Temperature: t = 40C+220C
(40F+428F)
(Check O-Ring resistance)

Sliding face material combination Q1Q1 or U2Q1

Pressure: p1 = 12bar (174 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 1.0 mm, d1 75 1.5 mm

38

Materials
Seal face: Silicon carbide (Q1), Carbon graphite resin
impregnated (B), Tungsten carbide (U2)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K),
Perflourocarbon rubber/PTFE (U1)
Springs: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G)
Standards and approvals
ANSI
Recommended applications
Process industry
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Food and beverage industry
Universally applicable
ANSI process pumps

45

45

da

a1

Sliding face material combination BQ1

Pressure: p1 = 25bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)

CARTEXABPN EagleBurgmann
Item Description
45
45
1
Seal face
A
2, 5, 7 O-Ring
3
Spring
4
Seat
6
Shaft sleeve
8
Drive collar
da
9
Set screw
10
Snap ring
11
Cover
a1
s
12
Assembly fixture
13
Screw
14
Gasket
15
Screw plug
Machined cover
version
Cartex
ANSISeite 1 EagleBurgmann
16
Lip seal (-QN), throttle ring (-TN)

Advantages
Ideal for use in ANSI process pumps
Universal applicable for packings conversions, retrofits or
original equipment
Seal for standardizations
No dimensional modification of the seal chamber
necessary, small radial installation height
No damage of the shaft by dynamically loaded O-Ring
Extended service life
Installation faults are avoided, cost-effective
No damage caused by dirt entered during assembly
Straightforward and easy installation due to
pre-assembled unit (reduced down-times)

Cast cover version

CartexANSISeite-2 EagleBurgmann

Product variants
Cartex-ASTN and -ABTN
Single seal standard (S) and big bore (B) seal chambers.
Same as Cartex-ASPN and -ABPN but with throttle ring
(item 16) at the atmospheric side. The cover has auxiliary
connections for flushing and quench.
Throttle ring: PTFE carbon-graphite reinforced (T12)

Cartex-ASQN and -ABQN

Single seal for operation with unpressurized quench for
standard (S) and big bore (B) seal chambers. Same as
Cartex-ASPN and -ABPN version but with lip seal (item
16) at the atmospheric side. The cover has auxiliary
connections for flushing and quench.
Lip seal: NBR (P), PTFE carbon reinforced (T3)
l 15

l 15
l 17

l 16

l 17

l 16

max

min

16

d3

min

d3

15

d3

max

d3

15

Cartex-ASTN

Cartex-ASQN

CartexASQN EagleBurgmann

CartexASTN EagleBurgmann

Big bore - Dimensions in inch

d1
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.500
2.625
2.750
3.000
3.250

d2

1.713

1.960

2.461
2.583
2.677
2.834
2.960
3.212
3.338
3.660
3.937

d 3min.

1.752

2.000

2.500
2.661
2.756
2.913
3.093
3.299
3.417
3.740
4.016

d 3max.

2.795

3.189

4.055
3.937
4.567
4.528
4.409
5.276
5.118
5.236
5.512

l1

2.638

2.638

2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
3.307

Standard bore - Dimensions in inch

d1
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
3.000
3.250
3.750

d2
1.693
1.713
1.969
1.961
2.200
2.340
2.461
2.583
2.677
2.834
2.960
3.070
3.212
3.338
3.660
3.937
4.189
4.689

d 3min.
1.732
1. 752
2.008
2.000
2.244
2.421
2.500
2.661
2.756
2.913
3.039
3.125
3.291
3.417
3.740
4.016
4.268
4.750

d 3max.
2.205
2.205
2.402
2.402
2.717
2.795
2.953
3.070
3.189
3.583
3.583
3.590
3.937
4.016
4.370
4.724
4.921
5.433

l1
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
2.638
3.307
3.307
3.307

16

l2

1.669

1.669

1.669
1.669
1.929
1.669
1.945
1.919
1.919
1.945
2.276

l3

0.969

0.969

0.969
0.969
0.709
0.969
0.693
0.719
0.719
0.693
1.031

l4

1.000

1.000

1.000
1.000
1.260
1.000
1.276
1.250
1.250
1.276
1.276

l15

2.937

2.947

3.012
3.071
3.130
3.012
3.130
3.130
3.130
3.130
3.858

l16

1.909

1.919

1.984
2.059
2.102
1.984
2.120
2.120
2.120
2.120
2.516

l17

1.028

1.028

1.028
1.012
1.028
1.028
1.028
1.028
1.028
1.028
1.343

a1

3.311

3.543

4.567
4.409
4.882
5.276
4.685
5.512
5.354
5.512
5.906

da

4.500

5.118

6.496
5.984
6.260
6.890
6.417
7.795
6.890
7.480
8.228

0.437

0.437

0.559
0.551
0.551
0.709
0.709
0.709
0.709
0.630
0.650

l2
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.669
1.929
2.260
2.260
2.260

l3
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.709
1.047
1.047
1.047

l4
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.122
1.250
1.260
1.260
1.260
1.000

l15
2.937
2.937
3.130
2.947
3.130
3.130
3.012
3.071
3.130
3.012
3.130

3.130
3.130
3.130
3.858
3.858

l16
1.909
1.909
2.102
1.919
2.102
2.102
1.984
2.043
2.102
1.984
2.102

2.102
2.102
2.102
2.516
2.516

l17
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028
1.028

1.028
1.028
1.028
1.343
1.343

a1
2.756
2.440
2.638
2.760
2.950
3.030
3.228
3.190
3.430
3.820
3.858
4.020
4.528
4.528
4.646
5.000
5.315
5.827

da
0.433
0.437
0.433
0.437
0.551
0.551
0.559
0.551
0.630
0.650
0.650
0.709
0.709
0.630
0.709
0.709
0.709
0.866

s
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

Connection

1/4 NPT

1/4 NPT

3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

Connection
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

39

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Cartex ANSI Dual seals

l5
( l6 )

l7

Cartex-ABDN

l4
21
8
20

h6

d2

min

d3

9 15 14 17

10

5 4 1

7
d1

max

d3

19
18

12 13 16

2 11 3

Features
Dual seal
Available for standard (Cartex-ASDN) and big bore
(Cartex-ABDN) seal chambers
Cartridge
Balanced
Independent of direction of rotation
Double pressure balanced
Integrated pumping device

Sliding face material combination BQ1

Pressure: p1 = 25bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)

Barrier fluid circulation system:

p3max. = 25bar (363 PSI)
p (p3 - p1)ideal = 23bar (2944 PSI),
7bar (102 PSI) for barrier media with poor lubricating
properties
Pump startup:
p (p3 p1)max. = 25bar (363 PSI) allowed
Recommended supply medium: max. ISO VG 5
Axial movement: 1.0 mm, ab d1 = 75 mm 1.5 mm

40

CARTEXABDN EagleBurgmann

Materials
Seal face: Silicon carbide (Q1), Carbon graphite resin
impregnated (B), Tungsten carbide (U2)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K),
Perfluorocarbon rubber/PTFE (U1)
Springs: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)
Standards and approvals
ANSI
Recommended applications
Process industry
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Food and beverage industry
Universally applicable
ANSI process pumps

45

45
OUT

IN

22
da

21
IN

OUT

Machined cover version

45
CARTEXANSI
45 EagleBurgmann
IN
OUTDrehdeckel
Version

22
21

da

a2

Sliding face material combination Q1Q1 or U2Q1

Pressure: p1 = 20bar (290 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)

Description
Seal face
O-Ring
Spring
Seat
Shaft sleeve
Cover
Seat
Drive collar
Set screw
Snap ring
Assembly fixture
HSH Cap screw
Gasket
Screw plug

Operating range (see note on page 1)

Shaft diameter: d1 = 25100 mm (1.000"4.000")
Other sizes on request
Temperature: t = 40C+220C
(40F+428F)
(Check O-Ring resistance)

Item
1, 9
2, 5, 7, 10, 13, 15
3, 11
4
6
8
12
14
16
17
18
19
20, 22
21

a2

Advantages
Ideal for use in ANSI process pumps
Universal applicable for packings conversions, retrofits or
OEM
Ideal seal for standardizations
No dimensional modification of the seal chamber
necessary, small radial installation height
No damage of the shaft by dynamically loaded O-Ring
Extended service life
Installation faults are avoided, cost-effective
No damage caused by dirt entered during assembly
Straightforward and easy installation due to
pre-assembled unit (reduced down-times)

IN

OUT

Cast cover version

CARTEX DN EagleBurgmann
Version: Gussdeckel

Big bore - Dimensions in inch

d1
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.500
2.625
2.750
3.000
3.250

d2

1.713

1.960

2.461
2.583
2.677
2.834
2.960
3.212
3.338
3.660
3.937

d 3min.

1.752

2.000

2.500
2.661
2.756
2.913
3.093
3.299
3.417
3.740
4.016

d 3max.

2.795

3.189

4.055
3.937
4.567
4.528
4.409
5.276
5.118
5.236
5.512

l4

1.000

1.000

1.000
1.000
1.260
1.000
1.276
1.250
1.250
1.276
1.276

Standard bore - Dimensions in inch

d1
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
3.000
3.250
3.750

d2
1.693
1.713
1.969
1.961
2.200
2.340
2.461
2.583
2.677
2.834
2.960
3.070
3.212
3.338
3.660
3.937
4.189
4.689

d 3 min.
1.732
1. 752
2.008
2.000
2.244
2.421
2.500
2.661
2.756
2.913
3.039
3.125
3.291
3.417
3.740
4.016
4.268
4.750

d 3 max.
2.205
2.205
2.402
2.402
2.717
2.795
2.953
3.070
3.189
3.583
3.583
3.590
3.937
4.016
4.370
4.724
4.921
5.433

l4
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.122
1.250
1.260
1.260
1.260
1.000

l5

3.228

3.406

3.406
3.406
3.406
3.406
3.406
3.406
3.406
3.406
3.406

l6

1.886

2.083

2.083
2.083
2.102
2.102
2.102
2.102
2.102
2.102
2.516

l7

1.343

1.323

1.323
1.323
1.303
1.303
1.303
1.303
1.303
1.303
1.303

a2

3.311

3.543

4.567
4.409
4.882
5.276
4.685
5.512
5.354
5.512
5.906

da

4.500

5.118

6.496
5.984
6.260
6.890
6.417
7.795
6.890
7.480
8.228

0.437

0.437

0.559
0.551
0.551
0.709
0.709
0.709
0.709
0.630
0.650

Connection

1/4 NPT

1/4 NPT

3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

l5
3.406
3.228
3.406
3.406
3.406
3.406
3.406
3.406
3.406
3.406
3.406

3.406
3.406
3.406
4.252
4.252

l6
2.102
3.228
2.102
2.083
2.102
2.102
2.102
2.102
2.102
2.102
2.102

2.102
2.102
2.102
2.516
2.516

l7
1.303
1.343
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303
1.303

1.303
1.303
1.303
1.736
1.736

a2
2.441
2.441
2.756
2.756
2.953
3.091
3.228
3.307
3.425
3.819
3.858

4.528
4.528
4.646
5.000
5.315

da
3.937
4.134
4.252
4.213
4.488
4.921
5.118
5.118
5.472
5.512
5.866
6.181
6.693
6.378
7.441
7.835
7.830
8.189

s
0.433
0.437
0.433
0.437
0.551
0.551
0.559
0.551
0.630
0.650
0.650
0.709
0.709
0.630
0.709
0.709
0.709
0.866

Connection
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

41

Mechanical seals Mechanical seals for pumps Standard cartridge seals

MA290 / MA390
l1
23
12

9
10

h7

max.

min.

d1
d1

d2

d3

Standards and approvals

EN 12756
ISO 3096
Recommended applications
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Building services industry
Food and beverage industry
Universally applicable
Centrifugal pumps
Eccentric screw pumps
Process pumps

42

Product variant
MA390 (MA391)
Axially downsized type of MA290 (MA291).

MA290 MA291 EagleBurgmann

l2

45
l3

Item Description
1
Seal face
2, 5, 7 O-Ring
3 Spring
4
Seat
6
Drive collar
8
Set screw
9
Seal cover
10
Gasket
11
Assembly fixture
12
HSH Cap screw

D ,Q

D, Q

D Q

Seal cover MA290 (MA291)

MA290MA291 EagleBurgmann

Splung

45
6l

Materials
Seal face (MA290, MA390): High density carbon graphite
Seal face (MA291, MA391): Silicon carbide (Q1)
Seat (MA290/291, MA390/391): Silicon carbide (Q1)
Metal parts: 1.4401 (G)
Secondary seals: FKM (V)

12

l7

MA291 / MA391:
Pressure: p =10bar (145 PSI)
Temperature: t = 20C ...+160C (4F+320F)
(oil), 0C+60C (+32F+140F) (water)
Sliding velocity: vg = max. 20 m/s (66 ft/s)
Viscosity: 3 Pas
Solids content: 10 %

11
12

Features
Cartridge
Balanced
Independent of direction of rotation
Stationary multiple springs
Springs and pin located on the atmospheric side
Operating range (see note on page 1)
MA290 / MA390:
Pressure: p =16bar
Temperature: t = 20C ...+160C (4F+320F)
(oil), 0C+60C (+32F+140F) (water)
Sliding velocity: vg = max. 20 m/s (66 ft/s)
Viscosity: 0.5 Pas
Solids content: 0.3 %

D, Q

D, Q
Quench
oder Verschlussschraube

D Q
Quench AUS
oder Drainage

Seal cover MA390 (MA391)

MA390 MA391 EagleBurgmann

Quench
oder Verschlussschraube

Dimensions in mm

d
20
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
70
75
80
85
90
95
100

d1min.
30
34
35
38
40
42
43
45
48
50
53
55
58
60
63
65
68
70
73
75
80
85
90
95
100
105
110

d1max.
51
51
51
54
56
56
66
66
66
66
71
71
81
81
81
81
96
96
96
96
102
114
114
124
124
134
134

d2
58
58
58
63
63
63
73
73
73
73
78
78
88
88
88
88
103
103
103
103
109
121
121
131
131
141
141

d3
104
104
104
108
108
108
118
118
118
118
128
128
138
138
138
138
164
164
164
164
178
193
193
208
208
218
218

l1
42
42
42
42
42
42
42
42
42
42
42
42
44
44
44
44
46
46
46
46
46
49
49
49
49
49
49

l2
60
60
60
65
65
65
75
75
75
75
80
80
90
90
90
90
105
105
105
105
111
123
123
133
133
143
143

l3
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
18
18
18
18
18
18
18
20
20
20
20

43

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Unitex
l1
l2

l3

20

15

5 1.2

1.1

11

12

h6

1.3

1.4

dN

d2

d3

d9

10

13

Recommended applications
Chemical industry
Pulp and paper industry
Water and waste water technology
Cold and hot water
Cooling fluids
Beverages
Diluted lyes and acids
Suspensions with low solids content
Circulating pumps
Water and waste water pumps
Production of pressure oils for bio diesel fuels

44

l6

l 28
l 10

H8

l5

d7

Standards and approvals

Material approvals: e.g. FDA, KTW, WRAS, W270, NSF,
ACS

Seat alternative

H11

Materials
Seal face: Carbon graphite resin impregnated (B),
Silicon carbide (Q1)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E)
Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)

G6 (EN 12756)

G6 (M32N4) EagleBurgmann

Unitex EagleBurgmann

Item Description
1.1 Seal face
1.2 Bellows
1.3 Drive collar
1.4 L-ring (Spring collar)
2
Spring
3
Seat (G60)
4
O-Ring or corner sleeve
5
Spacer ring
6
Shaft sleeve
7
O-Ring
8
Cover
9
Gasket
10 Drive collar
11
Set screw
12 Snap ring
13 Assembly fixture
14 HSH Cap screw
15 Screw plug

d6

Operating range (see note on page 1)

Shaft diameter: dN = 2575 mm (1"2.625")
Pressure: p1 = 12bar (174 PSI)
Temperature: t = 20C+140C (4F+284F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 0.5 mm

l4

Advantages
Straightforward and easy installation
Fits into any installation space due to smallest outer
diameter
Important material certifications available
Universal application opportunities (standardization)
No modifications of the pump's installation chamber
necessary
Economical cartridge solution
Comes with flush connection acc. to API 682, Plan 11 for
seal chamber cleaning and cooling

14

20

Features
Single cartridge seal
Elastomer bellows
Unbalanced
Independent of direction of rotation
Stationary seat, rotating spring
Bellows and spring free from torsion
Metric and inch sizes available

da

45

Seal cover

45

Unitex EagleBurgmann

Dimensions in mm

dN
25
28
30
33
35
38
40
43
45
48
50
53
55
60
65
70
75

d2
38.4
42.4
42.4
45.0
49.1
51.3
54.3
56.3
59.8
61.8
64.8
66.8
71.0
76.5
83.0
88.0
93.4

d 3min.
41.5
44.5
45.5
48.0
50.8
54.5
57.5
59.5
63.0
65.0
68.0
70.0
73.0
79.0
85.7
94.0
98.4

Dimensions in inch

dN
1.000
1.125
1.250
1.375
1.500
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625

d2
1.512
1.669
1.772
1.933
2.020
2.354
2.433
2.551
2.795
2.874
3.012
3.209
3.268

d 3min.
1.634
1.750
1.890
2.000
2.146
2.480
2.559
2.677
2.875
2.992
3.110
3.287
3.374

d 3max.
51.0
52.0
56.0
57.0
61.5
66.0
68.0
70.5
73.0
75.0
78.0
87.0
83.0
91.0
98.5
108.0
118.0

d9
60
60
63
65
68
73
75
78
79
82
85
95
90
100
108
116
125

da
105
105
105
110
107
123
123
133
130
130
148
148
148
157
162
178
190

a
62
62
67
67
70
75
77
80
82
84
87
97
92
102
110
118
127

s
13.2
13.2
13.2
13.2
13.2
14.7
14.7
14.7
14.2
14.2
14.7
17.5
17.5
17.5
17.5
17.5
17.5

l1
65.5
68.0
68.0
69.5
72.5
72.5
75.5
76.5
76.5
78.0
80.5
81.5
83.5
85.5
88.0
92.0
93.5

l2
41.0
41.5
41.5
42.0
44.0
44.0
44.5
44.5
44.5
45.0
47.0
47.0
47.0
47.0
48.5
48.5
49.0

l3
24.5
26.5
26.5
27.5
28.5
28.5
31.0
32.0
32.0
33.0
33.5
34.5
36.5
38.5
39.5
43.5
44.5

l4
23
23
23
23
26
26
26
26
26
26
28
28
28
28
28
28
28

t
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

d 3max.
2.000
2.050
2.250
2.420
2.625
2.812
2.940
3.190
3.437
3.560
3.590
3.800
3.937

d9
2.362
2.362
2.559
2.677
2.874
3.110
3.228
3.346
3.740
3.780
3.937
4.173
4.252

da
4.134
4.134
4.331
4.213
4.843
5.118
5.118
5.827
5.512
6.181
6.181
6.693
6.378

a
2.440
2.441
2.638
2.756
2.950
3.230
3.307
3.430
3.820
3.858
4.020
4.252
4.331

s
0.520
0.520
0.520
0.520
0.579
0.559
0.559
0.579
0.689
0.689
0.689
0.689
0.689

l1
2.579
2.677
2.736
2.854
2.854
3.012
3.071
3.169
3.287
3.287
3.366
3.465
3.465

l2
1.614
1.634
1.654
1.732
1.732
1.752
1.772
1.850
1.850
1.850
1.850
1.909
1.909

l3
0.965
1.043
1.083
1.122
1.122
1.260
1.299
1.319
1.437
1.437
1.516
1.555
1.555

l4
0.906
0.906
0.906
1.024
1.024
1.024
1.024
1.102
1.102
1.102
1.102
1.102
1.102

t
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
1/4 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT

45

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Mtex Single seals

l1
l2

15

16

Mtex-QN

11

12

d1

d3

d2

l3

10

13
14

Operating range (see note on page 1)

Shaft diameter: d1 = 2580 mm (1"3.15")
Temperature: t* = 40C+220C (40F+428F)
Pressure: p = 25bar (363 PSI)
Sliding velocity: vg = 20 m/s (66 ft/s)

* Operating limits of O-Rings to be observed

Materials
Seal face: Carbon graphite antimony impregnated (A),
Silicon carbide (Q1)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K)
Bellows: Inconel 718 (M6)
Metal parts: CrNiMo steel (G), Duplex (G1)
Throttle ring: PTFE carbon graphite reinforced (T12)
Lip seal: NBR (P), PTFE carbon reinforced (T3)

46

Recommended applications
Process industry
Chemical industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment

Mtex EagleBurgmann

45

45

Seal cover

Item Description
1
Bellows unit
2, 5, 7 O-Ring
3, 11
Set screw
4
Seat
6
Shaft sleeve
8
Cover
9
Lip seal or throttle ring
10
Drive collar
12
Snap ring
13
Assembly fixture
14
HSH Cap screw
15
Gasket
16
Screw plug

a1

Advantages
Ideal seal for standardizations
Universal applicable for packings conversions, retrofits or
OEM
Suitable for high temperature
No dimensional modification of the seal chamber
necessary, small radial installation height
Trouble-free running due to bellows unit with vibration
dampers (essential in case of dry-running)
No dynamically loaded O-Ring
Self cleaning effect of the bellows
Installation faults are avoided, cost-effective
No damage caused by dirt entered during assembly
Straightforward and easy installation due to
preassembled unit (reduced down-times)
Individual adaptation to pump design possible

l4

da

Features
Single seal
Cartridge
Balanced
Independent of direction of rotation
Metal bellows
Single seal with quench and lip seal (-QN) or
throttle ring (-TN)
Version available with multipoint injection ring
(-QNM, -TNM)
Supply connections for flush (A) and quench (B)

Mtex EagleBurgmann

Product variants
Mtex-QNM
Single seal, as Mtex-QN
with additional multipoint injection ring (item B).

Mtex-TNM
Single seal, as Mtex-TN
with additional multipoint injection ring (item B).

Dimensions in mm

d1
25
30
32
33
35
38
40
43
45
48
50
53
55
60
65
70
75
80

d2
45.0
49.4
52.3
52.3
54.8
57.5
58.8
61.9
65.0
68.4
70.0
71.9
74.6
83.9
87.5
93.0
96.8
104.7

d 3min.
47.0
52.0
54.5
54.5
58.0
60.0
62.0
64.5
68.5
71.0
73.0
75.0
77.0
87.0
90.0
98.0
101.6
108.0

Mtex TNM EagleBurgmann

Mtex QNM EagleBurgmann

d 3max.
51.0
56.0
57.0
57.0
61.5
66.0
68.0
70.5
73.0
75.0
78.0
87.0
83.0
91.0
98.5
108.0
118.0
124.0

l1
79.5
78.4
78.4
78.4
78.4
78.4
78.2
78.4
78.4
78.7
79.1
77.8
78.9
80.1
80.0
81.5
94.4
94.4

l2
26.1
25.0
25.0
25.0
25.0
25.0
24.8
25.0
25.0
25.3
25.7
24.4
25.5
26.7
26.6
28.1
30.5
30.4

l3
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
63.9
64.0

l4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
28.0
28.0

da
105.0
105.0
108.0
108.0
113.0
123.0
123.0
133.0
138.0
138.0
148.0
148.0
148.0
157.0
163.0
178.0
190.0
195.0

a1
62.0
67.0
70.0
70.0
72.0
75.0
77.0
80.0
82.0
85.0
87.0
97.0
92.0
102.0
109.3
118.3
129.0
135.0

s
13.2
13.2
13.2
13.2
13.2
13.2
14.2
14.2
14.2
14.2
14.2
18.0
18.0
18.0
18.0
18.0
18.0
18.0

47

Mechanical seals Mechanical seals for pumps Standard cartridge seals

Mtex Dual seals

l5
l7

l6

d2

Operating range (see note on page 1)

Shaft diameter: d1 = 2580 mm (1"3.15")
Temperature: t* = 40C+220C (40F+428F)
Pressure: p1 = 25bar (232 PSI)
Sliding velocity: vg = 20 m/s (66 ft/s)

API Plan 52 (53/54)

Pump startup:
p (p3 p1)max. 16bar (232 PSI) allowed

* Operating limits of O-Rings to be observed

48

9 15

16 17

11 8 12 13 14

18
19

l4

Item Description
1
Bellows unit
2, 5, 7, 10, 13, 15 O-Ring
3, 16
Set screw
4, 12
Seat
6
Shaft sleeve
8
Housing
9
Seal face
11
Spring
14
Drive collar
17
Snap ring
18
Assembly fixture
19
HSH Cap screw
20, 22
Gasket
23
Screw plug

Product variant
Mtex DN EagleBurgmann

Recommended seal supply

EagleBurgmann TS2000 Thermosiphon system
Recommended applications
Process industry
Chemical industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment
Materials
Seal face: Carbon graphite (A), Silicon carbide (Q1)
Seat: Silicon carbide (Q1), Tungsten carbide (U2)
Secondary seals: FPM (V), EPDM (E), FFKM (K)
Bellows: Inconel 718 (M6)
Springs: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), Duplex (G1)

Mtex9-DN
Dimensions, items and descriptions as for Mtex-DN,
but with optimized seal face geometry for pressurized
operation according to API Plan 53/54. A barrier fluid
system (e.g. EagleBurgmann TS2000) is necessary.
Pressure: p1 = 10bar (145 PSI)
Sliding velocity: vg = 20 m/s (66 ft/s)

Barrier fluid circulation system:

p3max. = 16bar (232 PSI)
p (p3 p1)ideal = 23bar (2944 PSI)
p (p3 p1)max. = 16bar (232 PSI)
API Plan 53/54
Pump startup:
p (p3 p1)max. = 16bar (232 PSI) allowed

45

45
OUT

IN

22

da

23
IN

OUT

a2

Barrier fluid circulation system:

p3max. = 16bar (232 PSI)
p (p3 p1)ideal = 23bar (2944 PSI)
p (p3 p1)max. 10bar (145 PSI) at <120C (<248F)
5bar (73 PSI) at 220C ( 232 PSI)

10

Seal cover

Features
Double seal
Mtex-DN: API Plan 52 (53/54)
Mtex9-DN: API Plan 53/54
Cartridge
Balanced
Independent of direction of rotation
Metal bellows
Stationary O-Ring
Pumping device independent of direction of rotation

Advantages
Ideal seal for standardizations
Universal applicable for packings conversions, retrofits or
OEM
Suitable for high temperature
No dimensional modification of the seal chamber
necessary, small radial installation height
Trouble-free running due to bellows unit with vibration
dampers (essential in case of dry-running)
No damage of the shaft by dynamically loaded O-Ring
Self cleaning effect of the bellows
Installation faults are avoided, cost-effective
No damage caused by dirt entered during assembly
Straightforward and easy installation due to
preassembled unit (reduced down-times)
Individual adaptation to pump design possible

20 4

d1

d3

Dimensions in mm

d1
25
30
32
33
35
38
40
43
45
48
50
53
55
60
65
70
75
80

d2
45.0
49.4
52.3
52.3
54.8
57.5
58.8
61.9
65.0
68.4
70.0
71.9
74.6
83.9
87.5
93.0
96.8
104.7

d 3min.
47.0
52.0
54.5
54.5
58.0
60.0
62.0
64.5
68.5
71.0
73.0
75.0
77.0
87.0
90.0
98.0
101.6
108.0

d 3max.
51.0
56.0
57.0
57.0
61.5
66.0
68.0
70.5
73.0
75.0
78.0
87.0
83.0
91.0
98.5
108.0
118.0
124.0

l4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
28.0
28.0

l5
87.0
86.5
86.5
86.5
86.5
86.5
86.3
86.5
86.5
86.8
87.2
87.4
87.0
88.2
88.1
89.6
107.4
106.8

l6
33.6
33.1
33.1
33.1
33.1
33.1
32.9
33.1
33.1
33.4
33.8
34.0
33.6
34.8
34.7
36.2
43.5
42.9

l7
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
53.4
63.9
63.9

da
105.0
105.0
108.0
108.0
113.0
123.0
123.0
133.0
138.0
138.0
148.0
148.0
148.0
157.0
163.0
178.0
190.0
195.0

a2
62.0
67.0
70.0
70.0
72.0
75.0
77.0
80.0
82.0
85.0
87.0
97.0
92.0
102.0
109.3
118.3
129.0
135.0

s
13.2
13.2
13.2
13.2
13.2
14.0
14.2
14.2
14.2
14.2
14.2
18.0
18.0
18.0
18.0
18.0
18.0
18.0

49

Mechanical seals Mechanical seals for pumps Standard cartridge seals

APItex-S
l2

l1
Q

Advantages
Insensitive to shaft deflections and process
fluctuations
Good heat dissipation
Pre-assembled unit, ready to install
Low space requirements
Springs protected from the product
Operating range (see note on page 1)
Shaft diameter: d1 = 20110 mm (0.79"4.33")
Pressure: p1 = 22bar (319 PSI)
Temperature: t = -40C+176C
(-40F+349F)
(>176C (349F) please inquire)
Sliding velocity: vg = 23 m/s (75 ft/s)
Materials
Seal ring: Blister resistant carbon,
Silicon carbide SSiC (Q12)
Mating ring: Silicon carbide SSiC (Q1)
Secondary seals:
EPDM (E), NBR (P), FKM (V), FFKM (K)
Springs: Hastelloy C-4 (M)* and C-276 (M5)
Metal parts: CrNiMo steel 316 (G) or equivalent,
optional materials on request.

* EagleBurgmann standard

d5

d4

3 8

20 24
h6

1 4 5

21

Recommended applications
Item Description
APITEXSC EagleBurgmann
Process industry
1
Seal ring
Oil and gas industry
2, 5, 7, 16
O-Ring
Refining technology
3 Spring
Petrochemical industry
4
Mating ring
Chemical industry
6
Seal sleeve
Highly volatile hydrocarbons
8
Gland plate
Toxic and hazardous media
9
Flow distributor
Media with poor lubrication properties
20
Set ring
Low solids content and low abrasive media
21, 24
Set screw
Vertical and horizontal ANSI chemical standard pumps
22
Setting device
23
Hexagon bolt
Standards and approvals
API 682 / ISO 21049
F Flush
API 682 4th ed. Cat. 1 - 1CW-FX
Q Quench
D Drain
Dimensions in mm

d1
20
25
30
35
40
45
50
55
60
65
70
75
80
85
85
90
95
100
105
110

d2
50.4
55.4
60.4
65.4
70.4
75.4
80.4
85.4
96
101
106
111
116
123.5
123.5
128.5
133.5
138.5
143.5
152.5

d3
58
63
68
73
78
83
88
93
105
110
115
120
125
136
136
141
146
151
156
161

d4
105
110
115
120
125
135
140
145
160
165
170
175
185
190
190
195
200
205
210
215

d5
127
132
137
142
147
162
167
172
187
192
197
202
218
223
223
228
233
238
243
248

l
70.5
70.5
70.5
70.5
70.5
70.5
72.5
72.5
87
87
87
87
87
86
86
86
86
86
86
86

* Immersion depth of seal sleeve into the stuffing box.

50

d1
16

Features
Single seal
Cartridge unit
Category 1, Type A, Arrangement 1
Balanced
Independent direction of rotation
Shrink-fitted seal faces
Solid mating ring

7
d2

d3

H7

(h)

23
22

l1
66.5
66.5
66.5
66.5
66.5
66.5
68.5
68.5
83
83
83
83
83
71.5
71.5
71.5
71.5
71.5
71.5
71.5

l2
4
4
4
4
4
4
4
4
4
4
4
4
4
14.5*
14.5*
14.5*
14.5*
14.5*
14.5*
14.5*

d
13.5
13.5
13.5
13.5
13.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
22
22
22
22
22
22
22
22

Qty.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

Acc. ASME B73.1 (h min.)

19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
22.22
22.22
22.22
22.22
22.22
25.4
25.4
25.4
25.4
25.4
25.4
25.4

Mechanical seals Mechanical seals for pumps Standard cartridge seals

APItex-T
l1

l2

LBO

19
23

3 16

13

24
d1

18

11 20

21

h6

8 17 15

d5

1 4 5 10 14 9 12

d4

h6

7
d2

d3

H7

(h)

22

d1

Features
Dual seal
Cartridge unit
Category 1, Type A, Arrangement 2 or 3
Balanced
Independent of direction of rotation
Shrink-fitted seal faces
Solid mating rings

Advantages
Suitable for pressure reversal
Insensitive to shaft deflections and process fluctuations
Cover distortion cannot cause mating ring misalignment
Good heat dissipation
No external pump necessary
Pre-assembled unit, ready to install
Low space requirements
Security due to proofed design
Springs protected from the product

Materials
Item Description
Seal ring: Blister resistant carbon,
1, 9
Seal ring
APITEXTC EagleBurgmann
Silicon carbide SSiC (Q12)
2, 5, 7, 10, 13, 15, 16, 17 O-Ring
Mating ring: Silicon carbide SSiC (Q1)
3, 11
Spring
Secondary seals:
4, 12
Mating ring
EPDM (E), NBR (P), FKM (V), FFKM (K)
6
Seal sleeve
Springs: Hastelloy C-4 (M)* and C-276 (M5)
8, 18
Gland plate
14 Driver
Metal parts: CrNiMo steel 316 (G) or equivalent,
19
HSH Cap screw
optional materials on request.
20
Set ring
* EagleBurgmann standard
21, 24
Set screw
Recommended applications
22
Setting device
23
Hexagon bolt
Process industry
Oil and gas industry
LBO Liquid buffer/barrier OUT
Refining technology
LBI Liquid buffer/barrier IN
Petrochemical industry
Chemical industry
Standards and approvals
Highly volatile hydrocarbons
API 682 / ISO 21049
Toxic and hazardous media
API 682 4th ed. Cat. 1 - 2CW-CW
Media with poor lubrication properties
API 682 4th ed. Cat. 1 - 3CW-FB
Low solids content and low abrasive media
Vertical and horizontal ANSI chemical standard pumps

Operating range (see note on page 1)

Shaft diameter: d1 = 20110 mm (0.79"4.33")
Pressure: p1 = 22bar (319 PSI)
Temperature: t = -40C+176C
(-40F+349F)
(>176C (349F) please inquire)
Sliding velocity: vg = 23 m/s (75 ft/s)

Dimensions in mm

d1
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110

d2
50.4
55.4
60.4
65.4
70.4
75.4
80.4
85.4
96
101
106
111
116
123.5
128.5
133.5
138.5
143.5
152.5

d3
58
63
68
73
78
83
88
93
105
110
115
120
125
136
141
146
151
156
161

d4
105
110
115
120
125
135
140
145
160
165
170
175
185
190
195
200
205
210
215

d5
127
132
137
142
147
162
167
172
187
192
197
202
213
223
228
233
238
243
248

l
96.5
96.5
96.5
96.5
96.5
96.5
100
100
127.5
127.5
127.5
127.5
127.5
131.5
131.5
131.5
131.5
131.5
131.5

l1
68.5
68.5
68.5
68.5
68.5
68.5
72
72
88
88
88
88
88
92
92
92
92
92
92

l2
28
28
28
28
28
28
28
28
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5
39.5

LBI

d
13.5
13.5
13.5
13.5
13.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
22
22
22
22
22
22
22

Qty.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

Acc. ASME B73.1 (h min.)

19.05
19.05
19.05
19.05
19.05
19.05
19.05
19.05
22.22
22.22
22.22
22.22
22.22
25.4
25.4
25.4
25.4
25.4
25.4

51

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

eMG1
l

1.3

Operating range (see note on page 1)

Shaft diameter: d1 = 15100 mm (0.59"3.94")
Pressure: p1 = 16bar (230 PSI),
vacuum 0.5bar (7.25 PSI), up to 1bar (14.5 PSI)
with seat locking
Temperature: t = 20C+140C (4F+284F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 2.0 mm
Recommended applications
Process industry
Chemical industry
Pulp and paper industry
Water and waste water technology
Food and beverage industry
Sugar industry
Oil applications
Water, waste water, slurries (up to 5% by weight)
Pulp (up to 4% otro)
Latex
Dairies, beverages
Sulfide slurries
Chemicals
Oils
Chemical standard pumps
Helical screw pumps
Stock pumps
Circulating pumps
Submersible pumps
Water and waste water pumps
52

1.4

Product variants
eMG12
Dimensions, items and designations same as for eMG1,
but with an extended bellows tail to achieve the fitting
length I1k according to EN 12756 in combination with seat
G6 or G60 (da exceeds EN 12756).

eMG13
Dimensions, items and designations same as for eMG1,
but with an extended bellows tail to achieve the fitting
length I1N according to EN 12756 in combination with
seat G6 or G60 (da exceeds EN 12756).

eMG12

l1
l1K

EMG12 EagleBurgmann

eMG13

ds min

Advantages
Small outer diameter of bellows support (dbmin) enables
direct retaining ring support, or smaller spacer rings
Optimal alignment characteristic through self-cleaning of
disk/shaft
Improved centering across entire pressure operating range
No torsion on bellows
Shaft protection over entire seal length
Protection of seal face during installation due to special
bellows design
Insensitive to shaft deflections due to large axial
movement ability
Suitable for low-end sterile applications
Dimension adaptions and additional seats available

2 3

Materials
Item Description
Seal face: Carbon graphite antimony impregnated (A),
1.1 Seal face
Carbon graphite resin impregnated (B),
1.2 Bellows
EMG1 EagleBurgmann
Silicon carbide (Q1, eSiC-Q7), Tungsten carbide (U3)
1.3 Set of springs
Seat: Silicon carbide (Q1, Q2, eSiC-Q7)),
1.4 PEEK-PTFE disk
Tungsten carbide (U3), Special cast CrMo steel (S),
2
Seat (G6)
Aluminium oxide (V)
3
O-Ring or cup rubber
Elastomer: NBR (P), EPDM (E), FKM (V), HNBR (X4)
Notes
Metal parts: CrNiMo steel (G), Hastelloy C-4 (M)
The eMG1 can also be used as a multiple seal in tandem
Standards and approvals
or in a back-to-back arrangement. Installation proposals
available upon request.
Various material approvals
(depending on type and material combinations).
Dimension adaptations for specific conditions, e.g. shaft
Please inquire!
in inches or special seat dimensions are available upon
FDA
request.
WRAS
KTW
ACS
W270

ds min

Features
For plain shafts
Elastomer bellows rotating
Unbalanced
Independent of direction of rotation
Single and dual seal

1.1

d3

1.2

d1 h8

db min

da

d ST min

eMG1

l2
l1N

EMG13 EagleBurgmann

Seat alternatives

20

EN 12756
G9 G9
EagleBurgmann

l6

H8

d7

H8

d7

l 28
l 10

d6

H11

d6

H7

d 12

d8
l8

l6

l5

H11

l9

G4
G4 EagleBurgmann

G6 EN 12756

G6 (M32N4) EagleBurgmann

l 17

G60 EN 12756

d1
15
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
55
60
65
70
75
80
85
90
95
100

d3
20.8
21.0
23.7
26.7
27.7
31.2
31.2
35.0
37.0
40.2
40.2
43.2
46.2
48.8
51.8
53.8
56.8
58.8
64.2
70.0
75.0
80.0
85.5
90.5
96.0
102.0
107.0
112.0

d6

23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
67
72
77
83
88
95
100
105
110
115

d7

27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
75
80
85
92
97
105
110
115
120
125

d8

3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

d11
20.5
22.0
24.0
29.5
29.5
32.0
32.0
36.0
39.2
42.2
44.2
46.2
49.2
52.2
53.3
55.3
59.7
60.8
66.5
71.5
76.5
83.0
90.2
95.2
100.2
105.2
111.6
114.5

d 16 0,05

G50
Euro standard
G50 (MG1S20)
EagleBurgmann

G60MG1 EagleBurgmann

Dimensions in mm

d 14

H8

l 29

d7

l 28

d 6 H11

R1

l5

+ 0,5

20

R
+0,1

l 14
l 12

d 11

30

l5

l7

20

l 16

l 15

l6

d12
d14
24.6 17.0
28.0 17.0
30.0 20.0
35.0 21.5
35.0 23.0
38.0 26.5
38.0 26.5
42.0 29.5
45.0 32.5
48.0 32.5
50.0 36.5
52.0 36.5
55.0 39.5
58.0 42.5
62.0 46.0
64.0 46.0
68.4 49.0
69.3 52.0
75.4 58.5
80.4 61.5
85.4 68.0
92.0 71.0
99.0 77.5
104.0 84.0
109.0 87.0
114.0 93.5
120.3 96.5
123.3 103.0

d16
30.95
30.95
34.15
35.70
37.30
40.50
40.50
47.65
50.80
50.80
54.00
54.00
57.15
60.35
63.50
63.50
66.70
69.85
76.20
79.40
92.10
95.25
101.60
114.30
117.50
123.85
127.00
133.35

da
db *
28.5 18.5
28.5 19.5
32.0 21.5
37.0 24.0
37.0 26.0
42.5 28.0
42.5 29.0
49.0 32.0
49.0 34.0
53.5 36.0
53.5 37.0
57.0 40.0
59.0 43.0
62.0 45.0
65.5 48.0
68.0 50.0
70.5 53.0
74.0 55.0
81.0 60.0
88.5 66.0
93.5 71.0
99.5 76.0
107.0 81.0
112.0 86.0
120.0 92.0
127.0 97.0
132.0 102.0
137.0 107.0

dST
30
30
33
38
38
44
44
50
50
55
55
59
61
64
67
70
74
77
83
91
96
103
110
116
124
131
136
140

l
17.0
17.0
19.5
21.5
21.5
22.5
23.0
26.5
26.5
27.5
27.5
28.5
30.0
30.0
30.0
30.0
30.5
30.5
35.0
38.0
40.0
40.0
40.0
40.0
41.0
45.0
46.0
47.0

l1

28.4
30.0
30.0
30.0
32.5
32.5
35.0
35.0
35.0
35.0

36.0
36.0
36.0
36.0
36.0

36.5
41.5
41.5

lK

35.0
37.5
37.5
37.5
40.0
40.0
42.5
42.5
42.5
42.5

45.0
45.0
45.0
45.0
45.0

47.5
52.5
52.5

l1N

40

50

55

60

70
70

l2

33.4

42.5

46.0

51.0

59.0
54.5

l5

1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l6

4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7

l7

8.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0

l8

17.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2

l9

10.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2

l10

7.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
10.0
10.0
10.0
10.0
10.0
10.5
12.0
12.0
12.0
12.5
12.5
13.0
15.0
15.0
15.0
15.0

l12
7.5
8.5
9.0
8.5
8.5
8.5
8.5
10.0
11.5
11.5
12.0
12.0
11.3
11.8
13.2
12.8
12.8
12.8
14.5
14.5
14.2
14.2
15.2
16.2
16.0
16.0
17.0
17.0

l14 l15 l16 l17 l28 l29

6.6 1.2 3.8 9.0
10.5
7.5 1.5 5.0 9.0 6.6 10.5
8.0 1.5 5.0 9.0 7.5 10.5
7.5 1.5 5.0 9.0 7.5 10.5
7.5 1.5 5.0 9.0 7.5 10.5
7.5 1.5 5.0 9.0 7.5 10.5
7.5 1.5 5.0 9.0 7.5 10.5
9.0 1.5 5.0 10.5 7.5 12.0
10.5 1.5 5.0 10.5 7.5 12.0
10.5 1.5 5.0 10.5 7.5 12.0
11.0 1.5 5.0 10.5 7.5 12.0
11.0 1.5 5.0 10.5 7.5 12.0
10.3 1.5 5.0 10.5 9.0 12.0
10.8 1.5 5.0 10.5 9.0 12.0
12.0 2.0 6.0 10.5 9.0 12.0
11.6 2.0 6.0 10.5 9.0 12.0
11.6 2.0 6.0 10.5 9.0 12.0
11.6 2.0 6.0 12.0 9.5 13.5
13.3 2.0 6.0 12.0 11.0 13.5
13.3 2.0 6.0 12.0 11.0 13.5
13.0 2.0 6.0 14.5 11.0 16.0
13.0 2.0 6.0 14.5 11.3 16.0
14.0 2.0 6.0 14.5 11.3 16.0
15.0 2.0 6.0 18.5 12.0 20.0
14.8 2.0 6.0 18.5 14.0 20.0
14.8 2.0 6.0 18.5 14.0 20.0
15.8 2.0 6.0 18.5 14.0 20.0
15.8 2.0 6.0 18.5 14.0 20.0

R
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

Fitting length/axial movement tolerances: d1 15 18 mm 1.0; d1 20 26 mm 1.5; d1 28 100 mm 2.0 mm

* Minimum diameter of the mating collar

53

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

eMG
l

1.3

Features
For plain shafts
Elastomer bellows rotating
Unbalanced
Independent of direction of rotation
Single and dual seal
Advantages
Identical with eMG1 but with approx. 20%
shorter installation length
Small outer diameter of bellows support (dbmin) enables
direct retaining ring support, or smaller spacer rings
Optimal alignment characteristic through self-cleaning of
disk/shaft
Improved centering across entire pressure operating range
No torsion on bellows
Shaft protection over entire seal length
Protection of seal face during installation due to special
bellows design
Insensitive to shaft deflections due to large axial
movement ability
Dimension adaptions and additional seats available
Operating range (see note on page 1)
Shaft diameter: d1 = 15100 mm (0.59"3.94")
Pressure: p1 = 16bar (230 PSI),
vacuum 0.5bar (7.25 PSI), up to 1bar (14.5 PSI)
with seat locking
Temperature: t = 20C+140C (4F+284F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 2.0 mm
Recommended applications
Process industry
Chemical industry
Pulp and paper industry
Water and waste water technology
Food and beverage industry
Sugar industry
Water, waste water, slurries
(up to 5 % by weight)
Pulp (up to 4 % otro)
Latex
Dairies, beverages
Sulfide slurries
Chemicals
Oils
Chemical standard pumps
Helical screw pumps
Stock pumps
Circulating pumps
Submersible pumps
Water and waste water pumps
54

1.1

2 3

d3

1.2

d1 h8

db min

da

d ST min

eMG

1.4

Materials
Item Description
Seal face: Carbon graphite antimony impregnated (A),
1.1 Seal face
EMG EagleBurgmann
Carbon graphite resin impregnated (B),
1.2 Bellows
Silicon carbide (Q1, eSiC-Q7), Tungsten carbide (U3)
1.3 Set of springs
Seat: Silicon carbide (Q1, Q2, eSiC-Q7)),
1.4 PEEK-PTFE disk
Tungsten carbide (U3), Special cast CrMo steel (S),
2
Seat (G6)
Aluminium oxide (V)
3
O-Ring or cup rubber
Elastomer: NBR (P), EPDM (E), FKM (V), HNBR (X4)
Notes
Metal parts: CrNiMo steel (G), Hastelloy C-4 (M)
The eMG can also be used as a multiple seal in tandem
Standards and approvals
or in a back-to-back arrangement. Installation proposals
available upon request.
Various material approvals
(depending on type and material combinations).
Dimension adaptations for specific conditions, e.g. shaft
Please inquire!
in inches or special seat dimensions are available upon
FDA
request.
WRAS
KTW
Standard seat is the G6 with short axial length,
ACS
other seat alternatives available, see eMG1.
W270

Seat alternatives

20

EN 12756
G9 G9
EagleBurgmann

H8

l 28
l 10

d7

H8

d7

l6

d6

H11

d6

H7

d 12

d8
l8

l6

l5

H11

l9

G4
G4 EagleBurgmann

G6 EN 12756

G6 (M32N4) EagleBurgmann

l 17

G60 EN 12756

d1
15
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
55
60
65
70
75
80
85
90
95
100

d3
20.8
21.0
23.7
26.7
27.7
31.2
31.2
35.0
37.0
40.2
40.2
43.2
46.2
48.8
51.8
53.8
56.8
58.8
64.2
70.0
75.0
80.0
85.5
90.5
96.0
102.0
107.0
112.0

d6

23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
67
72
77
83
88
95
100
105
110
115

d7

27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
75
80
85
92
97
105
110
115
120
125

d8

3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

d11
20.5
22.0
24.0
29.5
29.5
32.0
32.0
36.0
39.2
42.2
44.2
46.2
49.2
52.2
53.3
55.3
59.7
60.8
66.5
71.5
76.5
83.0
90.2
95.2
100.2
105.2
111.6
114.5

d 16 0,05

G50
Euro standard
G50 (MG1S20)
EagleBurgmann

G60MG1 EagleBurgmann

Dimensions in mm

d 14

H8

l 29

d7

l 28

d 6 H11

R1

l5

+ 0,5

20

R
+0,1

l 14
l 12

d 11

30

l5

l7

20

l 16

l 15

l6

d12
d14
24.6 17.0
28.0 17.0
30.0 20.0
35.0 21.5
35.0 23.0
38.0 26.5
38.0 26.5
42.0 29.5
45.0 32.5
48.0 32.5
50.0 36.5
52.0 36.5
55.0 39.5
58.0 42.5
62.0 46.0
64.0 46.0
68.4 49.0
69.3 52.0
75.4 58.5
80.4 61.5
85.4 68.0
92.0 71.0
99.0 77.5
104.0 84.0
109.0 87.0
114.0 93.5
120.3 96.5
123.3 103.0

d16
30.95
30.95
34.15
35.70
37.30
40.50
40.50
47.65
50.80
50.80
54.00
54.00
57.15
60.35
63.50
63.50
66.70
69.85
76.20
79.40
92.10
95.25
101.60
114.30
117.50
123.85
127.00
133.35

da
db *
28.5 18.5
28.5 19.5
32.0 21.5
37.0 24.0
37.0 26.0
42.5 28.0
42.5 29.0
49.0 32.0
49.0 34.0
53.5 36.0
53.5 37.0
57.0 40.0
59.0 43.0
62.0 45.0
65.5 48.0
68.0 50.0
70.5 53.0
74.0 55.0
81.0 60.0
88.5 66.0
93.5 71.0
99.5 76.0
107.0 81.0
112.0 86.0
120.0 92.0
127.0 97.0
132.0 102.0
137.0 107.0

dST
30
30
33
38
38
44
44
50
50
55
55
59
61
64
67
70
74
77
83
91
96
103
110
116
124
131
136
140

l
15.0
15.0
17.0
19.0
19.0
19.0
19.0
23.0
23.0
23.5
23.5
24.5
25.0
25.5
25.5
25.5
26.0
26.0
30.0
32.0
34.0
34.0
34.0
34.0
35.0
38.0
39.0
40.0

l1

1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l1k

4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7

l1N

8.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0

l2

17.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2

l5

10.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2

l6

7.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
10.0
10.0
10.0
10.0
10.0
10.5
12.0
12.0
12.0
12.5
12.5
13.0
15.0
15.0
15.0
15.0

l7
7.5
8.5
9.0
8.5
8.5
8.5
8.5
10.0
11.5
11.5
12.0
12.0
11.3
11.8
13.2
12.8
12.8
12.8
14.5
14.5
14.2
14.2
15.2
16.2
16.0
16.0
17.0
17.0

l8
6.6
7.5
8.0
7.5
7.5
7.5
7.5
9.0
10.5
10.5
11.0
11.0
10.3
10.8
12.0
11.6
11.6
11.6
13.3
13.3
13.0
13.0
14.0
15.0
14.8
14.8
15.8
15.8

l9
l10 l12 l14 l15 l16 l17 l28 l29
1.2 3.8 9.0
10.5 1.2 9.0
10.5
1.5 5.0 9.0 6.6 10.5 1.5 9.0 6.6 10.5
1.5 5.0 9.0 7.5 10.5 1.5 9.0 7.5 10.5
1.5 5.0 9.0 7.5 10.5 1.5 9.0 7.5 10.5
1.5 5.0 9.0 7.5 10.5 1.5 9.0 7.5 10.5
1.5 5.0 9.0 7.5 10.5 1.5 9.0 7.5 10.5
1.5 5.0 9.0 7.5 10.5 1.5 9.0 7.5 10.5
1.5 5.0 10.5 7.5 12.0 1.5 10.5 7.5 12.0
1.5 5.0 10.5 7.5 12.0 1.5 10.5 7.5 12.0
1.5 5.0 10.5 7.5 12.0 1.5 10.5 7.5 12.0
1.5 5.0 10.5 7.5 12.0 1.5 10.5 7.5 12.0
1.5 5.0 10.5 7.5 12.0 1.5 10.5 7.5 12.0
1.5 5.0 10.5 9.0 12.0 1.5 10.5 9.0 12.0
1.5 5.0 10.5 9.0 12.0 1.5 10.5 9.0 12.0
2.0 6.0 10.5 9.0 12.0 2.5 10.5 9.0 12.0
2.0 6.0 10.5 9.0 12.0 2.5 10.5 9.0 12.0
2.0 6.0 10.5 9.0 12.0 2.5 10.5 9.0 12.0
2.0 6.0 12.0 9.5 13.5 2.5 12.0 9.5 13.5
2.0 6.0 12.0 11.0 13.5 2.5 12.0 11.0 13.5
2.0 6.0 12.0 11.0 13.5 2.5 12.0 11.0 13.5
2.0 6.0 14.5 11.0 16.0 2.5 14.5 11.0 16.0
2.0 6.0 14.5 11.3 16.0 2.5 14.5 11.3 16.0
2.0 6.0 14.5 11.3 16.0 2.5 14.5 11.3 16.0
2.0 6.0 18.5 12.0 20.0 2.5 18.5 12.0 20.0
2.0 6.0 18.5 14.0 20.0 2.5 18.5 14.0 20.0
2.0 6.0 18.5 14.0 20.0 2.5 18.5 14.0 20.0
2.0 6.0 18.5 14.0 20.0 2.5 18.5 14.0 20.0
2.0 6.0 18.5 14.0 20.0 2.5 18.5 14.0 20.0

R
1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

Fitting length/axial movement tolerances: d1 1518 mm 1.0; d1 2026 mm 1.5; d1 28100 mm 2.0 mm
* Minimum diameter of the mating collar

55

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

MG1
l

3
d1

d3

h8

1.1

min

db

MG1S20
Dimensions, items and designations same as for MG1,
but with an extended bellows tail to achieve the special
fitting length I1S in combination with seat G50.

Description
Seal face
Bellows
L-ring (spring collar)
L-ring (spring collar)
Spring
Seat
O-Ring or cup rubber

MG13
Dimensions, items and designations same as for MG1,
but with an extended bellows tail to achieve the fitting
length I1N according to EN 12756 in combination with
seat G6 or G60 (da exceeds EN 12756).
RMG12
Identical to MG12, but with a special bellows surface on
the shaft side. For use in hot water pumps up to 120 C
(248 F) and 25 bar (363 ft/s) or 140 C (284 F)
and 16 bar (232 PSI). Only in combination with seat
G606 (d1 = 12 38 mm) (0.47" 1.50").
Seal face: Tungsten Carbide (U3)
Seat G606: Carbon graphite resin impregnated (B)

MG12

MG13

l2

l1

l 1N

ds

min

l 1k

MG12 EagleBurgmann

MG1S20
MG13 EagleBurgmann

l3
l 1S

MG1S20 EagleBurgmann

56

1.4

Product variants
MG12
Dimensions, items and designations same as for MG1,
but with an extended bellows tail to achieve the fitting
length I1k according to EN 12756 in combination with
seat G6 or G60 (da exceeds EN 12756).

min

Recommended applications
Process industry
Chemical industry
Pulp and paper industry
Water and waste water technology
Food and beverage industry
Sugar industry
Oil applications
Water, waste water, slurries (up to 5% by weight)
Pulp (up to 4% otro)
Latex
Dairies, beverages
Sulfide slurries
Chemicals
Oils
Chemical standard pumps
Helical screw pumps
Stock pumps
Circulating pumps
Submersible pumps
Water and waste water pumps

1.3

ds

Operating range (see note on page 1)

Shaft diameter: d1 = 10100 mm (0.39"3.94")
Pressure: p1 = 16bar (230 PSI),
vacuum 0,5bar (7.25 PSI), up to 1bar (14.5 PSI)
with seat locking
Temperature: t = 20C+140C (4F+284F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 2.0 mm

1.5

Standards and approvals

Various material approvals e.g. FDA, WRAS, KTW, ACS,
W270, NSF available (depending on type and material
combinations).
Please inquire!
EN 12756 (MG12, MG13)

min

Advantages
Shaft protection over entire seal length
Protection of seal face during installation due to
specialbellows design
Insensitive to shaft deflections due to large axial
movement ability
Universal application opportunities
Important material certifications available
High flexibility due to wide offer on materials
Suitable for low-end sterile applications
Special design for hot water pumps (RMG12) available
Dimension adaptions and additional seats available

1.2

MG1 EagleBurgmann
Materials
Item Part no. to DIN 24250
Seal face: Carbon graphite antimony impregnated (A),
1.1 472
Carbon graphite resin impregnated (B), Silicon carbide (Q1),
1.2 481
Tungsten carbide (U3)
1.3 484.2
Seat: Silicon carbide (Q1, Q2), Tungsten carbide (U3),
1.4 484.1
Special cast CrMo steel (S), Aluminium oxide (V)
1.5 477
Elastomer: NBR (P), EPDM (E), FKM (V), HNBR (X4)
2 475
Metal parts: CrNiMo steel (G), Hastelloy C-4 (M)
3
412

dm

Features
For plain shafts
Single and dual seal
Elastomer bellows rotating
Unbalanced
Independent of direction of rotation
No torsion on bellows

da

d ST

min

MG1

Seat alternatives

20

G6 EN 12756

H8

d7

l 28
l 10

H11

l6

d6

l5

20
H8

d7

H8

d7

l 28
l 10

EN 12756
G9 G9
EagleBurgmann

l6

l6

H11

H11

d6

H7

d 12

d8
l8

l5

d6

l9

G4
G4 EagleBurgmann

G606
EN 12756
G606
EagleBurgmann

G6 (M32N4) EagleBurgmann

(for RMG12 only)

l 17

G60 EN 12756

d1
10
12
14
15
16
18
19
20
22
24
25
28
30
32
33
35
38
40
42
43
45
48
50
53
55
58
60
65
68
70
75
80
85
90
95
100

d3
15.7
17.7
19.7
20.8
21.0
23.7
26.7
26.7
27.7
31.2
31.2
35.0
37.0
40.2
40.2
43.2
46.2
48.8
51.8
51.8
53.8
56.8
58.8
62.2
64.2
67.2
70.0
75.0
78.0
80.0
85.5
90.5
96.0
102.0
107.0
112.0

d6
17
19
21

23
27

29
31
33
34
37
39
42
42
44
49
51

54
56
59
62
65
67
70
72
77
81
83
88
95
100
105
110
115

d7
21
23
25

27
33

35
37
39
40
43
45
48
48
50
56
58

61
63
66
70
73
75
78
80
85
90
92
97
105
110
115
120
125

d8
3
3
3

3
3

3
3
3
3
3
3
3
3
3
4
4

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

d11
15.5
17.5
20.5
20.5
22.0
24.0

29.5
29.5
32.0
32.0
36.0
39.2
42.2
44.2
46.2
49.2
52.2
53.3
53.3
55.3
59.7
60.8
63.8
66.5
69.5
71.5
76.5
82.7
83.0
90.2
95.2
100.2
105.2
111.6
114.5

d 16 0,05

G50
Euro standard
G50 (MG1S20)
EagleBurgmann

G60MG1 EagleBurgmann

Dimensions in mm

d 14

H8

l 29

d7

l 28

d 6 H11

R1

l5

+ 0,5

20

R
+0,1

l 14
l 12

d 11

30

l5

l7

20

l 16

l 15

l6

d12
19.2
21.6
24.6
24.6
28.0
30.0

35.0
35.0
38.0
38.0
42.0
45.0
48.0
50.0
52.0
55.0
58.0
62.0
62.0
64.0
68.4
69.3
72.3
75.4
78.4
80.4
85.4
91.5
92.0
99.0
104.0
109.0
114.0
120.3
123.3

d14
11.0
13.5
17.0
17.0
17.0
20.0
20.0
21.5
23.0
26.5
26.5
29.5
32.5
32.5
36.5
36.5
39.5
42.5
46.0
46.0
46.0
49.0
52.0
55.5
58.5
61.5
61.5
68.0
71.0
71.0
77.5
84.0
87.0
93.5
96.5
103.0

d16
24.60
27.80
30.95
30.95
30.95
34.15
34.15
35.70
37.30
40.50
40.50
47.65
50.80
50.80
54.00
54.00
57.15
60.35
63.50
63.50
63.50
66.70
69.85
73.05
76.20
79.40
79.40
92.10
95.25
95.25
101.60
114.30
117.50
123.85
127.00
133.35

da
22.5
25.0
28.5
28.5
28.5
32.0
37.0
37.0
37.0
42.5
42.5
49.0
49.0
53.5
53.5
57.0
59.0
62.0
65.5
65.5
68.0
70.5
74.0
78.5
81.0
85.5
88.5
93.5
96.5
99.5
107.0
112.0
120.0
127.0
132.0
137.0

db *
20.5
22.5
26.5
26.5
26.5
29.0
33.0
33.0
33.0
38.0
38.0
44.0
44.0
46.0
46.0
50.0
53.0
55.0
58.0
58.0
60.0
63.0
65.0
70.0
72.0
75.0
79.0
84.0
88.0
90.0
95.0
100.0
107.0
114.0
119.0
124.0

dm *
18
20
22
22
22
29
33
33
33
38
38
37
37
41
41
44
53
55
53
53
55
58
60
63
65
68
70
77
80
82
87
92
97
104
109
114

ds *
18
20
22
22
22
26
28
28
28
32
32
37
37
41
41
44
47
49
53
53
55
58
60
63
65
68
70
77
80
82
87
92
97
104
109
114

dST
24
26
30
30
30
33
38
38
38
44
44
50
50
55
55
59
61
64
67
67
70
74
77
81
83
88
91
96
100
103
110
116
124
131
136
140

l
14.5
15.0
17.0
17.0
17.0
19.5
21.5
21.5
21.5
22.5
23.0
26.5
26.5
27.5
27.5
28.5
30.0
30.0
30.0
30.0
30.0
30.5
30.5
33.0
35.0
37.0
38.0
40.0
40.0
40.0
40.0
40.0
41.0
45.0
46.0
47.0

l1
25.9
25.9
28.4
28.4
28.4
30.0
30.0
30.0
30.0
32.5
32.5
35.0
35.0
35.0
35.0
35.0
36.0
36.0
36.0
36.0
36.0
36.0
38.0
36.5
36.5
41.5
41.5
41.5
41.2
48.7
48.7
48.0
46.0
51.0
51.0
51.0

l1k
32.5
32.5
35.0

35.0
37.5

37.5
37.5
40.0
40.0
42.5
42.5
42.5
42.5
42.5
45.0
45.0

45.0
45.0
45.0
47.5
47.5
47.5
52.5
52.5
52.5
52.5
60.0
60.0
60.0
60.0
65.0
65.0
65.0

l1N
40
40
40

40
45

45
45
50
50
50
50
55
55
55
55
55

60
60
60
60
70
70
70
70
80
80
80
80
90
90
90
90
90

l1S
34.0
34.0
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
53.0
53.0
53.0
53.0
54.5
54.5
54.5
54.5
54.5
65.0
65.0
65.0
68.0
76.0
76.0
79.0
79.0
82.0

l2
33.4
33.4
33.4
33.4
33.4
37.5
37.5
37.5
37.5
42.5
42.5
42.5
42.5
47.5
47.5
47.5
46.0
46.0
51.0
51.0
51.0
51.0
50.5
59.0
59.0
59.0
59.0
69.0
68.7
68.7
68.7
78.0
76.0
76.0
76.0
76.0

l3
25
25
25
25
25
25
25
25
25
25
25
33
33
33
33
33
33
33
41
41
41
41
41
41
41
41
41
49
49
49
52
56
56
59
59
62

l5
1.5
1.5
1.5

1.5
2.0

2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l6
4
4
4

4
5

5
5
5
5
5
5
5
5
5
6
6

6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7

l7 l8
8.5 17.5
8.5 17.5
8.5 17.5

8.5 17.5
9.0 19.5

9.0 19.5
9.0 19.5
9.0 19.5
9.0 19.5
9.0 19.5
9.0 19.5
9.0 19.5
9.0 19.5
9.0 19.5
9.0 22.0
9.0 22.0

9.0 22.0
9.0 22.0
9.0 22.0
9.0 23.0
9.0 23.0
9.0 23.0
9.0 23.0
9.0 23.0
9.0 23.0
9.0 26.0
9.0 26.0
9.0 26.0
9.0 26.2
9.0 26.2
9.0 26.2
9.0 25.2
9.0 25.2

l9
10.0
10.0
10.0

10.0
11.5

11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0

14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
18.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2

l10
7.5
7.5
7.5

7.5
8.5

8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
10.0
10.0

10.0
10.0
10.0
10.5
12.0
12.0
12.0
12.0
12.0
12.5
12.5
12.5
13.0
15.0
15.0
15.0
15.0

l12
7.5
6.5
6.5
7.5
8.5
9.0

8.5
8.5
8.5
8.5
10.0
11.5
11.5
12.0
12.0
11.3
11.8
13.2
13.2
12.8
12.8
12.8
13.5
14.5
14.5
14.5
14.2
14.9
14.2
15.2
16.2
16.0
16.0
17.0
17.0

l14
6.6
5.6
5.6
6.6
7.5
8.0

7.5
7.5
7.5
7.5
9.0
10.5
10.5
11.0
11.0
10.3
10.8
12.0
12.0
11.6
11.6
11.6
12.3
13.3
13.3
13.3
13.0
13.7
13.0
14.0
15.0
14.8
14.8
15.8
15.8

l15
1.2
1.2
1.2
1.2
1.5
1.5

1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0

l16
3.8
3.8
3.8
3.8
5.0
5.0

5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0

l17
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
12.0
12.0
12.0
12.0
12.0
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
18.5

l28
6.6
6.6
6.6

6.6
7.5

7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
9.0
9.0

9.0
9.0
9.0
9.5
11.0
11.0
11.0
11.0
11.0
11.3
11.3
11.3
12.0
14.0
14.0
14.0
14.0

l29
9.0
9.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
13.5
13.5
13.5
13.5
13.5
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0

R
1.2
1.2
1.2
1.2
1.5
1.5

1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5

Fitting length/axial movement tolerances: d1 1012 mm 0.5; d1 1418 mm 1.0; d1 2026 mm 1.5; d1 28100 mm 2.0 mm
* Minimum diameter of the mating collar

57

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

MG9
l 1 1

l 1N

MG913/d1 G60 A

l 1S

Standards and approvals

EN 12756
Various material approvals e.g. FDA, WRAS, KTW, ACS,
W270, NSF available (depending on type and material
combinations).
Please inquire!

58

l 14

MG921/d1 G55 C

1.2

1.5

1.1

d1

min

Recommended applications
Chemical industry
Pulp and paper industry
Water and waste water technology
Cooling fluids
Media with low solids content
Pressure oils for bio diesel fuels
Circulating pumps
Submersible pumps
Multi-stage pumps (non-drive side)
Water and waste water pumps
Oil applications

1.4

Item Part no. to DIN 24250 Description

Seal face
1.2 481
Bellows
1.3 485
Drive collar
1.4 484.1
L ring (spring collar)
1.5 474
Washer
2 477
Spring
3 475
Seat
4
412
Rubber cup

MG9 EagleBurgmann
1.1 472

Seat alternatives
20

l 51

l5

l6

G55 US standard
G55 EagleBurgmann

H11

H8

d7

l 28

d6

d 71

0,002

30

G50
Euro standard
G50 (MG1S20) EagleBurgmann

l 41

d 61

l 29

l 61

l 17

d 16 0,05

Materials
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B), Silicon carbide (Q1)
Seat: Silicon carbide (Q1, Q2), Aluminium oxide (V)
Elastomer: NBR (P), EPDM (E), FKM (V), HNBR (X4)
Metal parts: CrNiMo steel (G)

MG912/d1 G60 A

0,03"

1.3

d 14

Operating range (see note on page 1)

Shaft diameter: d1 = 10100 mm (0.375"4")
Pressure: p1 = 12bar (174 PSI),
vacuum 0,5bar (7.25 PSI), up tobar (14.5 PSI)
with seat locking
Temperature: t = 20C+140C (4F+284F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 0.5 mm

l 1k

db

da

Advantages
Fits into any installation space due to smallest outer
seal diameter
Important material approvals available
Individual installation length can be achieved
High flexibility due to extended selection of materials
Universal application (standardization))

MG920/d1 G50 AB

R1

Features
For plain shafts
Single and dual seal
Elastomer bellows rotating
Unbalanced
Independent of direction of rotation
No torsion on bellows and spring
Conical or cylindrical spring
Metric and inch sizes available
Special seat dimensions available
US Patent No. 6.220.601

0,8

0,002"

MG901/d1 G55 C

h8

l 15

MG910/d1 G50 AB

0,04"

G60 EN 12756

G60MG1 EagleBurgmann

MG9the alternative
EagleBurgmann*
MG910/d1-G50

Crane*
1A
1A
2
2
1
2
21
502
521
2100-l1k
2100-l1N

MG920/d1-G50
MG901/d1-G55
MG921/d1-G55
MG912/d1-G60
MG913/d1-G60

Sealol*
43 CE long
43 CE long
43 CE short
43 CE short
43 CU long
43 CU short
43 CU short
43 DIN
43 DIN
43 DIN

Dimensions
Inch/mm
mm
Inch/mm
mm
Inch (USA only)
Inch (USA only)
Inch (USA only)
mm
mm
mm
mm

Table
B
A
B
A
C
C
C
A
A
A
A

* Connection dimensions identical

Table A Dimensions in mm
d1
10
12
14
15
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100

d6
17
19
21

23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115

d7
21
23
25

27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125

d14
11.0
13.5
17.0
17.0
17.0
20.0
21.5
23.0
26.5
26.5
29.5
32.5
32.5
36.5
36.5
39.5
42.5
46.0
46.0
49.0
52.0
55.5
58.5
61.5
61.5
65.0
68.0
71.0
71.0
77.5
84.0
87.0
93.5
96.5
103.0

d16
24.60
27.80
30.95
30.95
30.95
34.15
35.70
37.30
40.50
40.50
47.65
50.80
50.80
54.00
54.00
57.15
60.35
63.50
63.50
66.70
69.85
73.05
76.20
79.40
79.40
82.55
92.10
95.25
95.25
101.60
114.30
117.50
123.85
127.00
133.35

da
19.6
21.6
24.0
25.0
26.5
29.0
31.5
33.0
37.0
38.0
41.0
43.0
45.0
46.0
48.0
52.5
55.5
58.5
60.5
64.0
66.0
69.0
71.0
76.0
78.0
82.0
84.0
87.0
89.0
95.0
101.5
107.0
111.5
117.5
122.5

Table B Dimensions in inch/mm

d1
0.375"
0.500"
0.625"
0.750"
0.875"
1.000"
1.125"
1.250"
1.375"
1.500"
1.625"
1.750"
1.875"
2.000"
2.125"
2.250"
2.375"
2.500"
2.625"
2.750"
2.875"
3.000"
3.125"
3.250"
3.375"
3.500"
3.625"
3.750"
3.875"
4.000"

d1

9.53
12.70
15.88
19.05
22.23
25.40
28.58
31.75
34.93
38.10
41.28
44.45
47.63
50.80
53.98
57.15
60.33
63.50
66.68
69.85
73.03
76.20
79.38
82.55
85.73
88.90
92.08
95.25
98.43
101.60

d14
11.0
13.5
17.0
20.0
23.0
26.5
29.5
32.5
36.5
39.5
42.5
46.0
49.0
52.0
55.5
58.5
61.5
65.0
68.0
71.0
74.5
77.5
80.5
84.0
87.0
90.5
93.5
96.5
100.0
103.0

d16
24.60
27.80
30.95
34.15
37.30
40.50
47.65
50.80
54.00
57.15
60.35
63.50
66.70
69.85
73.05
76.20
79.40
82.55
92.10
95.25
98.45
101.60
111.15
114.30
117.50
120.65
123.85
127.00
130.20
133.35

da
18.8
22.3
26.5
29.5
33.0
38.0
41.5
45.0
48.0
52.5
57.0
60.5
64.0
66.0
71.0
76.5
78.5
82.0
84.0
89.0
92.5
95.5
101.5
104.7
107.0
111.5
114.5
118.0
121.0
125.0

db
13.0
15.0
18.0
19.0
20.0
22.0
24.5
27.0
29.0
30.0
34.0
36.0
38.0
39.0
41.0
44.5
47.5
50.5
52.5
56.0
58.0
61.0
63.0
66.0
68.0
71.5
73.5
76.5
79.0
85.0
91.5
97.0
103.0
108.0
114.0

db
12.5
16.0
20.0
23.0
27.0
30.5
34.5
38.0
41.0
44.5
48.5
51.5
55.0
58.0
61.5
65.0
68.5
72.0
75.0
79.0
82.0
85.5
91.0
94.0
98.0
100.0
104.0
108.0
112.0
116.0

l1
53.0
53.0
54.5
54.5
54.5
54.5
54.5
54.5
54.5
54.5
72.0
72.0
72.0
72.0
72.0
72.0
72.0
83.0
83.0
83.0
84.5
84.5
84.5
84.5
84.5
84.5
86.0
86.0
86.0
89.0
99.0
99.0
103.0
103.0
106.0

l1
53.0
53.0
54.5
54.5
54.5
54.5
72.0
72.0
72.0
72.0
72.0
83.0
83.0
84.5
84.5
84.5
84.5
84.5
86.0
86.0
89.0
89.0
99.0
99.0
99.0
99.0
103.0
103.0
106.0
106.0

l1k
32.5
32.5
35.0

35.0
37.5
37.5
37.5
40.0
40.0
42.5
42.5
42.5
42.5
42.5
45.0
45.0
45.0
45.0
45.0
47.5
47.5
47.5
52.5
52.5
52.5
52.5
52.5
60.0
60.0
60.0
60.0
65.0
65.0
65.0

l1S
34.0
34.0
35.5
35.5
35.5
35.5
45.0
45.0
45.0
45.0
45.0
53.0
53.0
54.5
54.5
54.5
54.5
54.5
65.0
65.0
68.0
68.0
76.0
76.0
76.0
76.0
79.0
79.0
82.0
82.0

l1N
40
40
40

40
45
45
45
50
50
50
50
55
55
55
55
55
60
60
60
60
70
70
70
70
70
80
80
80
80
90
90
90
90
90

l1S
34.0
34.0
35.5
35.5
35.5
35.5
35.5
35.5
35.5
35.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
53.0
53.0
53.0
54.5
54.5
54.5
54.5
54.5
54.5
65.0
65.0
65.0
68.0
76.0
76.0
79.0
79.0
82.0

l17
7.5
7.5
9.0
9.0
9.0
9.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
12.0
12.0
12.0
12.0
12.0
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5

l5
1.5
1.5
1.5

1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l29
9.0
9.0
10.5
10.5
10.5
10.5
12.0
12.0
12.0
12.0
12.0
12.0
12.0
13.5
13.5
13.5
13.5
13.5
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0

l6
4
4
4

4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7

l17
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
12.0
12.0
12.0
12.0
12.0
12.0
14.5
14.5
14.5
14.5
18.5
18.5
18.5
18.5
18.5

l28
6.6
6.6
6.6

6.6
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
9.0
9.0
9.0
9.0
9.0
9.5
11.0
11.0
11.0
11.0
11.0
11.0
11.3
11.3
11.3
12.0
14.0
14.0
14.0
14.0

l29
9.0
9.0
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
13.5
13.5
13.5
13.5
13.5
13.5
16.0
16.0
16.0
16.0
20.0
20.0
20.0
20.0
20.0

Table C Dimensions in inch

d1
0.375
0.500
0.625
0.750
0.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.000
3.125
3.250
3.375
3.500
3.625
3.750
3.875
4.000

d61
0.625
0.750
0.937
1.062
1.187
1.312
1.437
1.563
1.687
1.813
2.000
2.125
2.250
2.375
2.375
2.437
2.563
2.687
2.812
2.937
3.062
3.187
3.312
3.437
3.562
3.687
3.812
3.937
4.062
4.187

d71
0.875
1.000
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.125
2.375
2.500
2.625
2.750
3.000
3.125
3.250
3.375
3.375
3.500
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.625
4.750
4.875

da
0.740
0.878
1.043
1.161
1.299
1.496
1.634
1.772
1.890
2.067
2.244
2.382
2.520
2.598
2.795
2.992
3.071
3.228
3.307
3.504
3.642
3.760
4.000
4.122
4.213
4.390
4.508
4.646
4.764
4.921

db
0.492
0.630
0.787
0.905
1.063
1.200
1.358
1.496
1.614
1.752
1.909
2.028
2.165
2.283
2.421
2.559
2.697
2.834
2.953
3.110
3.228
3.366
3.583
3.700
3.858
3.937
4.095
4.252
4.409
4.567

l14
1.125
1.125
1.281
1.281
1.343
1.437
1.500
1.500
1.562
1.562
1.875
1.875
2.000
2.000
2.249
2.249
2.375
2.375
2.562
2.562
2.687
2.687
2.968
2.968
2.968
2.968
3.093
3.093
3.218
3.218

l15
1.500
1.500
1.718
1.718
1.781
2.000
2.062
2.062
2.124
2.124
2.500
2.500
2.625
2.625
2.937
2.937
3.062
3.062
3.375
3.375
3.500
3.500
3.906
3.906
3.906
3.906
4.031
4.031
4.156
4.156

l41
0.313
0.313
0.406
0.406
0.406
0.437
0.437
0.437
0.437
0.437
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.562
0.625
0.625
0.625
0.625
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781

l51
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100

l61
0.250
0.250
0.344
0.344
0.344
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.437
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.562
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656

59

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

EA560
l

0,3

l1
l2

1.2

30

Operating range (see note on page 1)

Shaft diameter: d1 = 850 mm (0.375"2")
Pressure: p1 = 7bar (102 PSI),
vacuum0.1bar (1.45 PSI)
Temperature: t = 20C+100C (4F+212F)
Sliding velocity: vg = 5 m/s (16 ft/s)
Axial movement: 1.0 mm

Materials
Item Description
Seal face: Carbon graphite resin impregnated (B),
1.1 Seal face
Silicon carbide (Q1, Q2)
1.2 Bellows
Seat: Aluminium oxide (V), Silicon carbide (Q1, Q2)
1.3 Spring collar
Elastomer: NBR (P), FKM (V)
1.4 Drive collar
EA560 EagleBurgmann
Metal parts: 1.4301 (F)
1.5 Spring
1.6 Spring holder
Recommended applications
2 Seat
Process industry
3
Corner sleeve
Chemical industry
Water and waste water technology
Glycols
Oils
Industrial pumps/equipment
Submersible pumps
Engine pumps
Circulating pumps

Dimensions in mm

Dimensions in inch

d
8
9
10
11
12
13
14
15
16
17
18
19
20
22
25
28
30
32
35
38
40
45
50

60

d1
21
24
24
24
26
26
28
28
32
32
35
35
38
40
44
46
50
54
58
60
64
66
72

d2
13
16
16
16
17
17
21
21
22
22
25
25
27
29
32
34
38
40
44
46
48
52
58

d3
12
13
14
15
16
17
18
19
20
21
22
23
24
26
29
32
35
37
40
43
45
50
55

d4
20,0
21,0
23,5
23,5
26,0
26,0
28,0
28,0
30,0
32,5
32,5
32,5
35,5
37,5
42,0
45,5
48,0
50,0
54,5
58,5
62,5
66,5
72,5

l
18
23
23
23
24
24
25
25
27
27
26
26
28
28
29
30
31
33
36
37
38
40
42

l1
7
7
7
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
10
10
10
10
10

l2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2

d
0.375
0.500
0.625
0.750
0.875
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000

d
9.525
12.700
15.875
19.050
22.225
25.400
28.575
31.750
34.925
38.100
41.275
44.450
47.625
50.800

d1
22.225
25.400
31.750
34.925
38.100
41.275
44.450
47.625
50.800
53.975
60.325
63.500
66.675
69.850

d2
14.3
17.5
20.6
23.8
27.0
30.2
33.3
36.5
39.7
42.9
46.0
49.2
52.4
55.6

d3
12.7
15.9
19.1
22.2
25.4
28.6
31.8
34.9
38.1
41.3
44.5
47.6
50.8
54.0

d4
23.5
26.0
30.0
32.5
37.5
44.0
48.0
50.0
54.5
58.5
64.0
67.0
71.0
73.5

l
28.6
28.6
32.5
32.5
34.1
36.5
38.1
38.1
39.7
39.7
47.6
47.6
50.8
50.8

l1
6.4
6.4
8.7
8.7
8.7
9.5
9.5
9.5
9.5
9.5
11.1
11.1
11.1
11.1

l2
1
1
1
1
1
1
1
1
1
1
1
1
1
1

H7

3
h9

1.4

Features
Single seal
Loosely inserted seal face provides self-adjusting capability
In-house manufactured sliding parts
Advantages
The EA560 is self-adjusting to shaft misalignments and
deflections because of the loosely inserted seal face
as well as the ability of the bellows to stretch and tighten.
The length of the contact area of the bellows with
the shaft is an optimum compromise between ease of
assembly (less friction) and sufficient adhesive force
for torque transmission. Additionally the seal fulfills very
specific leakage requirements. Because the sliding parts
are made in-house, a wide variety of special needs can
be accommodated.

d1

1.1

d2

min

d3

1.3

1.5

max

d4

1.6

ED560
l
l 1 +0,2

0,3

l2

1,5
t

d1
25
30
30
30
44
50
57
65
70
70
80

d2
17
20
20
20
23
28
33
38
43
48
53

d3
25
30
30
30
38
44
50
58
64
66
72

d4

60
60
70
80
85
90
95

d5

72
72
82
94
100
105
109

l
36
36
36
36
49
51
59
61
64.5
65
69.5

l1
5
5
5
5
7
9
9
9
11
10
10

1.4

1.4

30

Recommended applications
Process industry
Chemical industry
Water and waste water technology
Glycols
Oils
Industrial pumps/equipment
Submersible pumps
Engine pumps
Circulating pumps

Materials
Seal face: Carbon graphite resin impregnated (B),
Silicon carbide (Q1, Q2)
Seat: Aluminium oxide (V), Silicon carbide (Q1, Q2)
Elastomer: NBR (P)
Metal parts: 1.4301 (F)

l2

7
7
8
9
9
9
9

1.2

H7

2 3

h9

1.1

30

l1

Operating range (see note on page 1)

Shaft diameter: d1 = 1350 mm (0.51"1.96")
Pressure: p1 = d 19 mm: 2bar (29 PSI),
d 20 mm: 3bar (44 PSI),
vacuum0.1bar (1.45 PSI)
Temperature: t = 20C+70C (4F+158F)
Sliding velocity: vg = 5 m/s (16 ft/s)
Axial movement: 1.0 mm

d
13
14
15
16
20
25
30
35
40
45
50

1.2

Advantages
The ED560 is a dual seal in a back-to-back arrangement
with an EA560 base. Therefore, the seal combines the
advantages of the EA560 with the advantages of a dual
seal.

1.3

d3

1.1

Features
Dual seal
Good chemical resistance and ability to handle solids
In-house manufactured sliding parts

Dimensions in mm

1.5

d2

1.3

d1

H7

d = 20 ... 50 mm

1
l1
l

d = 13 ... 16 mm

0,3

Item Description
1.1 Seal face
ED560 EagleBurgmann
1.2 Bellows
1.3 Spring collar
1.4 Drive collar
1.5 Spring
2 Seat
3
Corner sleeve
4 Washer

l3

1.0
1.0
1.0
1.2
1.2
1.0
1.2

61

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

EA100
l 0,3
2

1.4

Advantages
The EA100 is the specialist for low duty applications and
one of our historic and bestselling seals in this sector. The
seal is easy to handle and quick to install. An incorporated
garter spring assures a good grip of the bellows on the
shaft and enhances satisfactory sealing performance. With
the ability of the bellows to stretch and tighten, the EA100
is insensitive to shaft movements.
The seal design is available in 3 types, each with a
different impeller connection: EA102 is with a collar.
EA103 is without a collar. EA104 provides a different coil
spring installation. More information on EA103 and EA104
is available on request.
Operating range (see note on page 1)
Shaft diameter: d1 = 820 mm (0.32"0.78")
Pressure: p1 = 5bar (73 PSI), vacuum0.1bar (1.45 PSI)
Temperature: t = 20C+100C (4F+212F)
Sliding velocity: vg = 5 m/s (16 ft/s)
Axial movement: 2.0 mm

d
8
9
10
11
12
13
14
15
16
17
18
19
20

62

d1
21
24
24
24
26
26
28
28
32
32
35
35
38

d2
13
16
16
16
17
17
21
21
22
22
25
25
27

d3
18.5
22.5
22.5
22.5
24.5
24.5
28.5
28.5
30.5
30.5
33.5
33.5
35.5

l
26
31
31
31
32
32
34
34
26
36
39
39
41

l1
7
7
7
7
7
7
7
7
8
8
8
8
8

l2
2
2
2
2
2
2
3
3
3
3
3
3
3

d1

H7

1.2

30

Features
Single seal
In-house manufactured carbon seal faces
Three different impeller connection available

Dimensions in mm

h9

1.1

d2

1.3

max

1.6

d3

1.5

l1

l2

l3

l3
8
8
8
8
8
9
9
9
9
9
10
10
10

Materials
Seal face: Carbon graphite resin impregnated (B)
Seat: Aluminium oxide (V)
Elastomer: NBR (P)
Metal parts: 1.4301 (F)
Recommended applications
Water and waste water technology
Drinking water
Hot water circulation pumps
Industrial pumps/equipment
Domestic pumps
Low duty water pumps
Pumps for water&under floor
heating systems
Pumps for solar systems

Item Description
1.1 Seal face
1.2 Bellows
1.3 Garter spring
1.4 Spring
1.5 Set screw
EA102 EagleBurgmann
1.6 Collar
2 Seat
3
Corner sleeve
Product variants
EA102
As EA100 but with a collar.
EA103
As EA100 but without a collar. Please inquire.
EA104
As EA100 but with different coil spring installations.
Please inquire.

EH700
l

0,3

1.4

0,3

+0,1

d5

d3
1.6

d4

2 3 4

g6

1.1

1.3

l4

1.7 1.5
d1

d2

H7

l1

1.2

Features
Single seal
Stationary spring-loaded unit enables operation in
high-range loads area
Balanced
In-house manufactured carbon seal faces
Advantages
The seal for stationary applications. The EH700 is based
on a unique stationary spring loaded unit that enables
the seal to operate under high speed and high pressure.
An additional advantage of the seal is the balanced
design, which ensures good sealing performance in highload conditions.
Operating range (see note on page 1)
Shaft diameter: d1 = 1535 mm
Pressure: p1 = 15bar (218 PSI),
vacuum0,1bar
Temperature: t = 20C+100C (4F+212F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 1.0 mm
Dimensions in mm
d
15
20
25
35

d1
22
30
35
45

d2
41
45
52
66

d3
12
12
22
32

d4
22
27.2
33.6
43.6

d5
34
45
52
66

l
29.5
31
37
41.6

l1
9.5
11
11.5
12.5

l2
0.6
0.6
0.8
0.8

Materials
Item Description
Seal face: Carbon graphite resin impregnated (B)
1.1 Seal face
Seat: Aluminium oxide (V, V1), Silicon carbide (Q1, EH700
Q2) EagleBurgmann
1.2 Bellows
Secondary seals: NBR (P), FKM (V)
1.3 Spring collar
Metal parts: 1.4301 (F)
1.4 Spring
1.5 Spring holder
Recommended applications
1.6 Cartridge
Water and waste water technology
1.7 Seat ring
Food and beverage industry
2 Seat
Water and waste water
3
Corner sleeve
Glycols
4 Case
Industrial pumps
Engine pumps
Skyscraper water supply pumps

l3

2
2.5
4

l4

1
1
1

l5

3.4
4.2
5.2

63

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

BT-AR

3a

d7 0,1

d1 0,05

5 3

d 6 0,1

5b

d3

d 4 min

5a

20

64

1 1a 2a 2

3a

l5
l6

l3

l4

1
Seal face housing
1a
Brazed seal face
BT-AR3
EagleBurgmann
2
Stationary
seathousing
2a
Brazed stationary seat
3
Bellows
3a O-Ring
4 Spring
5 Ring
5a
Locking ring
5b Collar

d7 0,1

3 5

Materials
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B),
Carbon graphite, full carbon (B3), Silicon carbide (Q1, Q6),
Tungsten carbide (U), PTFE glass fiber reinforced (Y)
Seat: Steatite (X), Aluminium oxide (V, V1),
Silicon carbide (Q1, Q6, Q7), Tungsten carbide (U),
Cr steel (E), CrNi steel (F), CrNiMo steel (G)
Elastomers: NBR (P), EPDM (E), FKM (V), HNBR (X4)
Metal parts: CrNi steel 1.4301(F), CrNiMo steel1.4401(G),
CrNi steel 1.4057 (F1)

Certificates
KTW
W270
ACS
WRAS
NSF
DM 174/04
FDA

5a 5b

20

* Dependent on medium, size and material

Recommended applications
Water and waste water technology
Pool and spa applications
Household appliances
Domestic and garden pumps
Whirlpool and swimming pool pumps
Dishwasher pumps
Submersible motors / pumps
Water pumps / waste water pumps

Product variants
BT-AR3
Seal faces with brazed tungsten carbide (U) for abrasive
media. Elastomers and diameter range thesame as BT-AR.
BT-AR EagleBurgmann
TheBT-AR3 is theright choice of seal for use in high duty
applications or when abrasives (e.g. waste water) could
damage theseal faces.

d 6 0,1

Operating range (see note on page 1)

Shaft diameter: d1 = 670mm (0.24"2.76")
Pressure: p1* = 6bar (87PSI),
vacuum0.5bar (7.45PSI)
up to 1bar (14.5PSI) with seat locking
Temperature: t* = -20C+120C (-4F+248F)
Sliding velocity: vg = 10m/s (33ft/s)

Item Description
1
Seal face
2
Stationary seat
3
Bellows
3a Gasket
4 Spring
5 Ring
5a
Locking ring
5b Collar

l4

d1 0,05

Features
Rubber bellows mechanical seal
Unbalanced
Single spring
Independent of direction of rotation
Short axial installation length

l3

d 4 min

The BT-AR can also be used as amultiple seal in tandem

or back-to-back arrangement when theproduct media
cannot ensure lubrication, or when sealing media with
ahigher solids content. Installation proposals can be
provided upon request.

l6

d3

Mechanical seal for large-series cold water pumps,

produced in millions of units per year. TheBT-AR owes its
success to thewide range of application, theshort axial
length (this allows for more economic pump construction
and saves material), and thebest quality/price ratio.
Theelasticity of thebellows design enables amore robust
operation.

l5

Seat alternatives

Dimensions BT-AR inmm

Type
6

d3
18

d4
23

8
8

20
24

23
27

10
10

10

10

24

27

12

11

11

24

27

13

12C

12

24

27

14

12

12

24

27

14

13

13

24

27

15

14S

14

28

30

18

14L
14
15

14
14
15

28
32
32

30
35
35

18
16
17

16R

16

32

35

18

16
17
18
19
20R
20
20S
22
23
24
25R

16
17
18
19
20
20
20
22
23
24
25

39
39
39
39
35
39
42
42
47
47
42

43
43
43
43
39
43
47
47
52
52
52

18
19
20
21
22
22
22
24
25
26
27

25
26
27
28
30
32
35
38
40
45
50
60
70

25
26
27
28
30
32
35
38
40
45
50
60
70

47
47
47
54
54
54
60
65
65
70
85
105
105

52
52
52
60
60
60
70
75
75
80
95
115
115

27
29
30
31
33
35
38
41
43
48
53
63
73

8S
8

PF C
l6
l5
20

3a

2
Stationary seat
3a Gasket
d7

d6

2
l4

PF A

20

l6
BT-PF-C EagleBurgmann
l5

2
Stationary seat
3a O-Ring

l4

BT-PF-A EagleBurgmann

d6

d7

d6

2 3a

d1

d7
22.0
18.0
22.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
26.0
25.0
26.0
26.0
28.5
29.5
28.5
29.5
29.5
30.0
29.5
30.0
38.0
42.0
42.0
42.0
42.0
35.0
42.0
45.0
45.0
50.0
50.0
50.0
45.0
50.0
50.0
50.0
57.0
57.0
57.0
63.0
68.0
68.0
73.0
88.0
110.0
110.0

I3

d7
25.40
25.40
25.40
31.75

I3
11.0
11.0
12.8
12.8

8.0
8.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
12.8
12.8
12.8
12.8
12.8
12.8
12.8
15.3
12.8
12.8
12.8
12.8
12.8
12.8
12.8
12.8
12.8
12.8
17.8
12.8
12.8
12.8
13.5
13.5
13.5
13.5
13.5
13.5
13.5
15.0
15.0
15.0
16.0
18.0
18.0
20.0
23.0
30.0
32.0

tol
I4
+0.5/0 4.0
+0.5/0 4.8
+0.5/0 4.0
+0.5/0 8.0
+0.5/0 5.5
+0.5/0 8.0
+0.5/0 5.5
+0.5/0 8.0
+0.5/0 5.5
+0.5/0 8.0
+0.5/0 5.5
+0.7/0 8.0
+0.7/0 5.5
+0.7/0 5.0
+0.7/0 8.0
+0.7/0 5.5
+0.7/0 7.5
+0.7/0 8.0
0.8
7.5
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 6.0
+0.7/0 8.0
+0.7/0 6.0
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 8.0
0.7
7.5
+0.7/0 8.0
+0.7/0 10.0
+0.7/0 10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
10.0
+1/0
12.0
+1/0
12.0
+1/0
12.0
+1/0
15.0
+1/0
15.0
+1/0
15.0

I5
0.5
0.5
0.5
1.0
0.5
1.0
0.5
1.0
0.5
1.0
0.5
1.0
0.5
0.5
1.0
0.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0

I6

tol
I4
+0.5/0 5.5
+0.5/0 7.5
+0.7/0 7.5
+0.7/0 10.3

I5
0.5
1.0
1.0
1.0

I6
4.5
5.5
5.5
8.0

3.5
3.5
3.5
6.0
4.5
6.0
4.5
6.0
4.5
6.0
4.5
6.0
4.5
4.0
6.0
4.5
5.5
6.0
5.5
6.0
6.0
4.0
6.0
4.0
6.0
6.0
6.0
6.0
6.0
5.5
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
9.0
9.0
9.0
12.0
12.0
12.0

Note
*
*
*
*
*
*
*
*
*

*
*
*

* Alternative seat dimensions

Dimensions BT-AR in inch/mm

d1
d1
d3
0.375"
9.53 24

d4
27

d6
12

0.500"
0.625"

27
36

15
18

12.70 24
15.88 32

Note
*

* Alternative seat dimensions

65

Mechanical seals Mechanical seals for pumps Elastomer bellows seals

BT-A2
l4

l3

5
5a

l7 min

Operating range (see note on page 1)

Shaft diameter: d1 = 1/2", 5/8", 3/4"
Pressure: p1* = 4bar (58PSI)
Temperature: t* = -20C+90C (-4F+194F)
Sliding velocity: vg = 10m/s (33ft/s)

Materials
Item Description
Seal face: Carbon graphite resin impregnated (B),
1
Seal face
Carbon graphite, full carbon (B3)
2 Seat
BT-A2 EagleBurgmann
Seat: Aluminium oxide (V1), Silicon carbide (Q1)
3 Bellows
Elastomers: NBR (P), EPDM (E), FKM (V)
3a Gasket
Metal parts: CrNi steel (F), CrNiMo steel (G)
4 Spring
5 Collar
Recommended applications
5a L-ring
Pool and spa applications
Household appliances
Domestic and garden pumps
Clean water pumps
Swimming pool pumps
Whirlpool pumps

* Dependent on medium, size and material

Dimensions BT-A2 in inch/mm

Features
Rubber bellows mechanical seal
Unbalanced
Single spring
Independent of direction of rotation
Stationary design

66

d1
0.500"
0.625"
0.750"

d1
12.70
15.88
19.05

d3
28.55
36.45
40.00

d4
35.00
41.00
44.00

d7
25.40
31.75
34.95

I3
5.2
6.8
6.5

tol
+0.5
+0.5
+0.5

I4

8.0
10.3
10.3

I6
6.0
8.5
8.0

I7
10
10
11

d4

d 3 +0,02

R1

R1

Stationary mechanical seal in inch dimensions. Spread

throughout theworld, this type of mechanical seal has
reached an unsurpassed quality level. TheBT-A2 features
all carbon or high quality resin impregnated carbon,
aluminium oxide 96%, is stationary and therubber
bellows are glued on collar. Static air pressure test to
100% production. Excellent solution for swimming pool
pumps.

3a

d1 0,05

d7 0,1

l6

BT-PN

3 1

3a

20

Features
Rubber bellows mechanical seals
Unbalanced
Single spring
Independent of direction of rotation
Operating range (see note on page 1)
Shaft diameter: d1* = 840mm (0.31"1.57")
Pressure: p1** = 12bar (174PSI),
vacuum0.5bar (7.45PSI)
Temperature: t** = -20C+120C (-4F+248F)
Sliding velocity: vg = 10m/s (33ft/s)
Operating limits depend on pvg factor
* Other diameters upon request
** Dependent on medium, size and material

Materials
Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B),
Siliconcarbide(Q1, Q6)
Seat: Aluminium oxide (V), Steatite (X),
Siliconcarbide(Q1, Q6, Q7)
Elastomers: NBR (P), FKM (V), EPDM (E)
Metal parts: CrNi steel1.4301(F), CrNiMosteel1.4401(G)

l5

The BT-PN is alarge series mechanical seal with asimple

yet effective design that is easy to assemble. Thespecial
spring arrangement allows ashort axial installation length.
This advantage is combined with an increased working
pressure capability of up to 12bar (174PSI). Thespring is
free from torque transmission.

d7 0,1

5b

d 6 0,1

5a

d3

d1 0,05

l1

l6
l4

l3

Certificates
KTW
W270
ACS
WRAS
NSF
FDA
DM 174/04

Item Description
1
Seal face
2
Stationary seat
BT-PN EagleBurgmann3 Bellows
3a Gasket
4 Spring
5 Ring
5a
Drive ring
5b Collar

Recommended applications
Pool and spa applications
Household appliances
Water and waste water technology
Food and beverage industry
Submersible oil filled motors (4" / 6")
Submersible pumps, back-to-back installation
Peripheral pumps for industrial applications
Domestic and garden pumps
Coffee machines
Shower pumps
Dimensions BT-PN in mm
d1
8.00
8.00
9.53
10.00
13.00
14.00
15.00
16.00
16.00*
20.00
25.00
30.00

d3
23
23
23
23
32
32
32
32
32
44
50
60

d6
10
10
12
12
17
17
17
17
17
22
27
33

d7
22.0
25.4
25.4
25.4
29.5
29.5
29.5
29.5
29.5
42.0
45.0
52.0

I1
17.5
19.0
19.0
19.0
20.8
20.8
20.8
20.8
24.3
22.0
27.0
34.0

I3
13.5
13.5
13.5
13.5
12.8
12.8
12.8
12.8
16.3
14.0
17.0
22.0

tol
I4
1
4.0
1
5.5
1
5.5
1
5.5
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 8.0
+0.7/0 8.0
1
8.0
1
10.0
1
12.0

I5
0.5
0.5
0.5
0.5
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5

I6
3.5
4.5
4.5
4.5
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.5

* 4" submersible motor

67

Mechanical seals Mechanical seals for pumps Metal bellows seals

MBS100
l 1K

0,3

( l9 )

Features
For unstepped shafts
Rotating bellows
Single seal
Balanced
Independent of direction of rotation
Advantages
For extreme temperature ranges
No dynamically loaded O-Ring
Self cleaning effect
Operating range (see note on page 1)
Shaft diameter: d1 = 20100 mm (0.79"4")
Pressure: p1 =25 (16*)bar (363 (232*) PSI)
Temperature: t = 40C+220C (160*)C
(40F+428 (320*)F)
Sliding velocity: vg = 20 m/s (66 ft/s)

* Operating limits for material combination Q1/Q1

Materials
Seal face: Carbon graphite (A), Silicon carbide (Q1)
Seat: Silicon carbide (Q12)
Bellows: Inconel 625 (T3)
Secondary seals: FKM (V)
Metal parts: Duplex (G1)

68

l8

0,5

20

l5

Standards and approvals

EN 12756
Recommended applications
Process industry
Refining technology
Petrochemical industry
Chemical industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment

H8

l3

d7

H11

1.1

1.2

h6

d1

d3

1.3

0,5

d6

d8
l6

MBS100 Item Description

EagleBurgmann

1.1 Seal face with bellows unit

1.2 O-Ring
1.3 Set screw
2
Seat (G9)
3 O-Ring

Dimensions in mm
d1
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
65
70
75
80
85
90
95
100

d3
33.3
36.5
39.0
39.0
42.0
44.0
46.0
47.0
49.2
52.4
55.6
58.7
58.7
61.9
65.1
68.3
69.7
74.6
74.6
84.1
87.3
95.3
98.4
104.8
108.0
114.3
120.7

d6
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
77
83
88
95
100
105
110
115

d7
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
85
92
97
105
110
115
120
125

d8
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

l1k
37.5
37.5
40.0
40.0
42.5
42.5
42.5
42.5
42.5
45.0
45.0
45.0
45.0
45.0
47.5
47.5
47.5
52.5
52.5
52.5
60.0
60.0
60.0
60.0
65.0
65.0
65.0

l3
30.5
30.5
28.5
28.5
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
32.5
32.5
32.5
37.5
37.5
37.5
42.0
42.0
41.8
41.8
46.8
47.8
47.8

l5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l6
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7

l8
15.0
15.0
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
23.0
23.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2

l9
7.0
7.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2

69

Mechanical seals Mechanical seals for pumps Metal bellows seals

MFL85N
l 1k

0,5

( l 9)

Operating range (see note on page 1)

Shaft diameter: d1 = 16100 mm (0.64"4")
Externally pressurized: p1 =25bar (363 PSI)
Internally pressurized:
p1 <120C (248F) 10bar (145 PSI )
p1 <220C (428F) 5bar (72 PSI)
Temperature: t = 40C+220C
(40F+428F), stationary seat lock necessary.
Sliding velocity: vg = 20 m/s (66 ft/s)
Materials
Seal face: Carbon graphite antimony impregnated (A),
Silicon carbide (Q12)
Seat: Silicon carbide (Q1)
Bellows: Inconel 718 hardened (M6),
Hastelloy C-276 (M5)
Metal parts: CrNiMo steel (G), Duplex (G1),
Hastelloy C-4 (M)

l5

Recommended applications
Process industry
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment

H8

d8
l6

Item Part no. to DIN 24250 Description

MFL85N EagleBurgmann
1.1 472/481

1.2 412.1
1.3 904
2
475
3 412.2

Product variants
MFL90N
Shaft diameter: d1 = 20100 mm (0.79"4")
Internally pressurized: p1 =16bar (232 PSI),
stationary seat lock necessary.
Externally pressurized: p1 = 10bar (145 PSI)
Temperature: t = 40C+220C
(40F+428F)
Sliding velocity: vg = 20 m/s (66 ft/s)

Seal face with

Bellows unit
O-Ring
Set screw
Seat (G9)
O-Ring

MFL85P/MFL90P
Version with pumping ring. Dependent on direction of
rotation. Can be retrofitted.
MFL85F
Dimensions, items and description as for MFL85N,
but with pumping screw (item no. 1.4).
Dependent on direction of rotation!
The pumping screw can be retrofitted.

1.4

MFL85F

MFL85F EagleBuegmann

70

d7

l8

0,5

H11

h6

l3

ds

Standards and approvals

EN 12756

0,5

Advantages
For extreme temperature ranges
No dynamically loaded O-Ring
Self cleaning effect
Short installation length possible
Pumping screw for highly viscous media available
(dependant on direction of rotation).

1.1

1.2

20

0,05

Features
For unstepped shafts
Rotating bellows
Single seal
Balanced
Independent of direction of rotation
Metal bellows

d1

d3

1.3

0,5

d6

Seat alternative
l6

d6

l 18

d7

H11

l 19

H8

20

l5

G16 G16 EagleBurgmann

(l1k shorter than specified by EN 12756)
Dimensions in mm
d1
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100

d3
30.0
32.0
33.5
36.5
39.0
39.6
42.8
45.0
46.0
48.0
49.2
52.3
55.5
57.5
58.7
61.9
65.0
68.2
70.0
71.7
74.6
79.0
84.1
87.3
87.3
95.0
98.4
104.7
111.0
114.0
117.4

d6
23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115

d7
27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125

d8
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

ds
38
39
41
44
47
48
51
53
55
56
58
61
64
67
69
72
74
77
80
83
85
88
95
96
96
104
109
114
119
124
129

l1K
42.5*
42.0
42.0
42.0
40.0
40.0
42.5
42.5
42.5
42.5
42.5
45.0
45.0
45.0
45.0
45.0
47.5
47.5
47.5
52.5
52.5
52.5
52.5
52.5
60.0
60.0
60.0
60.0
65.0
65.0
65.0

l3
32.5
30.5
30.5
30.5
28.5
28.5
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
32.5
32.5
32.5
37.5
37.5
37.5
37.5
34.5
42.0
42.0
41.8
41.8
46.8
47.8
47.8

l5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l6
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7

l8
17.5
14.0
14.0
14.0
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
26.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2

l9
10.0
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
18.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2

l18

15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
16.0
16.0
17.0
17.0
17.0
18.0
18.0
18.0
18.0
18.5
19.0
19.0
19.0
19.0
20.5
20.5
20.5

l19

7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
8.0
8.0
8.0
8.0
8.0
9.5
9.5
9.5
10.5
10.5
10.5
10.5
11.0
11.5
11.5
11.5
11.5
13.0
13.0
13.0

b
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
3.0
3.0
3.0
3.0
1.6
3.0
3.0
3.0
3.0
3.0
3.0
3.0

s
9.0
10.0
10.0
10.0
8.2
8.5
9.0
8.5
9.2
9.2
9.5
9.2
9.2
9.2
9.5
9.2
10.5
10.5
10.0
14.0
14.0
14.0
14.0
10.0
17.0
16.0
16.0
16.0
21.0
21.0
20.0

* Installation length is longer than l1k specified by EN 12756

71

Mechanical seals Mechanical seals for pumps Metal bellows seals

MFLWT
l1 0,5
(l9)
l7 0,5

Operating range (see note on page 1)

Shaft diameter: d1 = 16150 mm (0.64"6")
Externally pressurized: p1 =25bar (363 PSI)
Internally pressurized:
p1 <120C (248F) 10bar (145 PSI)
p1 <220C (428F) 5bar (73 PSI)
p1 <400C (752F) 3bar (44 PSI)
stationary seat lock necessary
Temperature: t = 20C+400C (4F+752F)
Sliding velocity: vg = 20 m/s (66 ft/s)

l 3 0,5

1.4

l8

l5

d7 H8

d 6 H11

1.1

d8
l6

Materials
Item Part no. to DIN 24250 Description
MFLWT80 EagleBurgmann
Seal face: Carbon graphite antimony impregnated
(A),
1.1 472/481
Seal face with
Silicon carbide (Q12)

bellows unit
Seat: Silicon carbide (Q1)
1.2 410
Sealing ring
Bellows: Inconel 718 hardened (M6),
1.3 474
Drive collar
1.4
HSH Cap screw
Hastelloy C-276 (M5)
1.5 904
Set screw
Metal parts: CrNiMo steel (G), Duplex (G1),
2 475
Seat
Carpenter 42 (T4), Hastelloy C-4 (M)
3
412
Sealing ring
Recommended applications
Product variant
Process industry
Oil and gas industry
MFLWT90
Refining technology
Shaft diameter: d1 = 16150 mm (0.64"6")
Petrochemical industry
Internally pressurized: p1 =16bar (232 PSI)
Chemical industry
Externally pressurized: p1 = 10bar (145 PSI)
Pulp and paper industry
Temperature: t = 20C+400C (4F+752F)
Hot media
stationary seat lock necessary
Highly viscous media
Sliding velocity: vg = 20 m/s (66 ft/s)
Pumps
Special rotating equipment
Dimensions in mm
d1
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100

72

1.2

Advantages
For extreme high temperature ranges
No dynamically loaded O-Ring
Self cleaning effect
Short installation length possible
Pumping screw for highly viscous media available
(dependent on direction of rotation).

1.3

20

Features
For unstepped shafts
Rotating bellows
Single seal
Balanced
Independent of direction of rotation
Metal bellows

d1 h6

d3

1.5

mx

d3
38
40
42
44
46
47
50
52
54
55
57
60
66
69
71
74
76
79
81
85
87
90
92
95
97
102
107
112
117
122
127

d6
29.0
31.0
34.0
37.0
37.0
39.0
42.0
44.0
49.0
49.0
51.0
54.0
56.0
59.0
62.0
65.0
67.0
70.0
72.0
75.0
77.0
81.0
83.0
88.0
88.0
95.0
100.0
105.0
110.0
115.0
122.2

d7
35.0
37.0
40.0
43.0
43.0
45.0
48.0
50.0
56.0
56.0
58.0
61.0
63.0
66.0
70.0
73.0
75.0
78.0
80.0
83.0
85.0
90.0
92.0
97.0
97.0
105.0
110.0
115.0
120.0
125.0
134.3

d8
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5

l1
58.0
58.0
58.0
58.0
58.0
58.0
58.0
58.0
60.5
60.5
60.5
60.5
61.5
61.5
62.5
62.5
62.5
62.5
62.5
68.0
68.0
71.0
71.0
71.0
71.0
71.0
71.0
71.0
71.0
71.0
74.0

l3
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
47.5
47.5
47.5
47.5
47.5
47.5
47.5
53.0
53.0
53.0
53.0
53.0
53.0
52.8
52.8
52.8
53.8
53.8
54.0

l5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0

l6
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
9

l7
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
11

l8
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
26.0
26.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2
30.0

l9
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
18.0
18.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2
20.0

f
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6

k
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

mx
M5
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

Mechanical seals Mechanical seals for pumps Metal bellows seals

MFLCT
l1 0,5
( l9)

l 3 0,5

l8

20

Recommended applications
Process industry
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Cold media
Highly viscous media
Pumps
Special rotating equipment

Operating range (see note on page 1)

Shaft diameter: d1 = 24150 mm (0.94"6")
Externally pressurized: p1 =25bar (363 PSI)
Internally pressurized: p1 = 10bar (145 PSI)
stationary seat lock necessary
Temperature: t = 100C+100C
(148F+212F)
Sliding velocity: vg = 20 m/s (66 ft/s)
d1
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100
2) d

d3
38
40
42
44
46
47
50
52
54
55
57
60
66
69
71
74
76
79
81
85
87
90
92
95
97
102
107
112
117
122
127

d3 2)

49.8
51.7
54.5
56.6
59.5
59.5
62.5
65.7
65.7
68.6
71.5
75.1
76.1
80.8
80.8
84.0
92.3
95.5
95.5
101.3
101.3
105.0
110.6
117.0
120.2
125.2
130.2

d6
29.0
31.0
34.0
37.0
37.0
39.0
42.0
44.0
49.0
49.0
51.0
54.0
56.0
59.0
62.0
65.0
67.0
70.0
72.0
75.0
77.0
81.0
83.0
88.0
88.0
95.0
100.0
105.0
110.0
115.0
122.2

d7
35.0
37.0
40.0
43.0
43.0
45.0
48.0
50.0
56.0
56.0
58.0
61.0
63.0
66.0
70.0
73.0
75.0
78.0
80.0
83.0
85.0
90.0
92.0
97.0
97.0
105.0
110.0
115.0
120.0
125.0
134.3

d8
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5

l6

MFLCT80 EagleBurgmann

Advantages
For extreme cold temperature ranges
No dynamically loaded O-Ring
Self cleaning effect
Short installation length possible
Pumping screw for highly viscous media available
(dependent on direction of rotation).

Dimensions in mm

d8

l5

Materials
Seal face: Carbon graphite antimony impregnated (A),
Silicon carbide (Q12)
Seat: Silicon carbide (Q1)
Bellows: Inconel 718 hardened (M6),
Hastelloy C-276 (M5)
Metal parts: CrNiMo steel (G)
Hastelloy C-4 (M)

l1
58.0
58.0
58.0
58.0
58.0
58.0
58.0
58.0
60.5
60.5
60.5
60.5
61.5
61.5
62.5
62.5
62.5
62.5
62.5
68.0
68.0
71.0
71.0
71.0
71.0
71.0
71.0
71.0
71.0
71.0
74.0

l3
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
46.5
47.5
47.5
47.5
47.5
47.5
47.5
47.5
53.0
53.0
53.0
53.0
53.0
53.0
52.8
52.8
52.8
53.8
53.8
54.0

l5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0

l6
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
9

l7
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
11

l8
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
22.0
23.0
23.0
23.0
23.0
23.0
23.0
23.0
26.0
26.0
26.0
26.0
26.2
26.2
26.2
25.2
25.2
30.0

l9
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.0
14.0
14.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
18.0
18.0
18.0
18.0
18.2
18.2
18.2
17.2
17.2
20.0

f
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6

H8

d7

1.1

H11

1.2

h6

1.3

1.4

Features
For unstepped shafts
Rotating bellows
Single seal
Balanced
Independent of direction of rotation
Metal bellows

0,5

mx

d1

d3

d3

1.5

l7

d6

Item Part no. to DIN 24250

1.1 472/481

1.2 410
1.3 474
1.4
1.5 904
2 475
3
412

Description
Seal face with
bellows unit
Sealing ring
Drive collar
HSH Cap screw
Set screw
Seat
Sealing ring

Product variant
MFLCT90
Shaft diameter: d1 = 20150 mm (0.64"6")
Internally pressurized: p1 =16bar (232 PSI),
stationary seat lock necessary
Externally pressurized: p1 = 10bar (145 PSI )
Temperature: t = 100C+100C (148F+212F)
Sliding velocity: vg = 20 m/s (66 ft/s)

k
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

mx
M5
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

executed in Hastelloy

73

Mechanical seals Mechanical seals for pumps Metal bellows seals

MF95N
l1K +0,5

20

Features
For unstepped shafts
Rotating bellows
Single seal
Balanced
Independent of direction of rotation
Roller bellows
Advantages
For extreme temperature ranges
No dynamically loaded O-Ring
Very good self cleaning effect
Suitable for low-end sterile applications
Operating range (see note on page 1)
Shaft diameter: d1 = 14100 mm (0.55"3.94")
Temperature: t = 40C ...+220C (40F+428F)
Pressure: p = 16bar (232 PSI)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement: 0.5 mm
Materials
Bellows: Hastelloy C-276 (M5)
Seal face: Silicon carbide (Q12),
Carbon graphite resin impregnated (B),
Carbon graphite antimony impregnated (A)
Seat: Silicon carbide (Q1)
Metal parts: CrNiMo steel (G1)

74

H8

l 18

0,5

d7

h6

l3

H11

d6

1.1

1.2

d1

d3

1.3

l7 +0,5

l6

l5

d8
5

Standards and approvals

EN 12756

MF95N EagleBurgmann
Item Part no. to DIN 24250 Description

1.1 472/481

1.2 412.1
1.3 904
2
475
3 412.2

Recommended applications
Process industry
Oil and gas industry
Refining technology
Chemical industry
Pharmaceutical industry
Pulp and paper industry
Food and beverage industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment
Dimensions in mm
d1
14
16
18
20
22
24
25
28
30
32
33
35
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100

d3
24
26
32
34
36
39
39
42
44
46
47
49
54
56
58
61
64
66
69
71
78
80
83
85
87
90
99
104
109
114
119
124

d6
21
23
27
29
31
33
34
37
39
42
42
44
49
51
54
56
59
62
65
67
70
72
75
77
81
83
88
95
100
105
110
115

d7
25
27
33
35
37
39
40
43
45
48
48
50
56
58
61
63
66
70
73
75
78
80
83
85
90
92
97
105
110
115
120
125

d8
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

Seal face with

bellows unit
O-Ring
Set screw
Seat (G16)
O-Ring

Product variant
MF90N
Shaft diameter: d1 = 14100 mm (0.55"3.94")
Temperature: t = 40C ...+220C (40F+428F)
Internally pressurized: p = 10bar (145 PSI),
stationary seat lock necessary.
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement: 0.5 mm

l1k
35.0
35.0
37.5
37.5
37.5
40.0
40.0
42.5
42.5
42.5
42.5
42.5
45.0
45.0
45.0
45.0
45.0
47.5
47.5
47.5
52.5
52.5
52.5
52.5
52.5
60.0
60.0
60.0
60.0
65.0
65.0
65.0

l3
30.5
29.5
30.5
30.5
30.5
33.0
33.0
35.5
35.5
35.5
35.5
35.5
37.0
37.0
37.0
37.0
37.0
38.0
38.0
38.0
42.0
42.0
42.0
42.0
41.5
48.5
48.5
48.5
48.5
52.0
52.0
52.0

l5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0

l6
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7

l7
8.5
8.5
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0

l18
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
16.0
16.0
17.0
17.0
17.0
18.0
18.0
18.0
18.0
18.5
19.0
19.0
19.0
19.0
20.5
20.5
20.5

Mechanical seals Mechanical seals for pumps Metal bellows seals

YE400
l1

l3
l2

1.1

1.2

d
5

Features
Single seal
Balanced
Independent of direction of rotation
Stationary metal bellows

Materials
Seal face: High density carbon graphite
Seat: Silicon carbide (Q2)
Bellows: Inconel 718 (M6)
Secondary seals: Graphite
Metal parts: 1.4404, Carpenter 42 (T4)

Advantages
For high or low temperature applications

Recommended applications
Refining technology
Power plant technology
Chemical industry
High and low temperature hydrocarbon services
Bottom fluid
Residual oil
Gas oil
Low temperature ethylene
Pumps
Special rotating equipment

Operating range (see note on page 1)

Pressure (single ply bellows):
p = vacuum20bar (... 290 PSI)
Pressure (two ply bellows):
p = vacuum35bar (... 508 PSI)
Temperature:
t = 240C+425C (400F+797F)
Sliding velocity: vg =50 m/s (164 ft/s)
Viscosity:1 Pas

1.3

h7

d2

d1

d3

min

10

8 7

0,3

d4

11

max

l4

1.4 1.5

Item Description
1
Stationary unit
1.1
Bellows unit
YE400 EagleBurgmann
1.2, 6 Gasket
1.3 Clamp sleeve
1.4, 7 Spring washer
1.5, 8 HSH Cap screw
2
Seat Housing
3
Secondary seal
4
Seat housing
5
Drive pin

Dimensions in mm
Size
code
X14
X16
X18
X20
X22
X24
X26
X28
X30
X32
X34
X36
X38
X40
X42
X44
X46
X48
X50
X52
X54
X56
X58
X60
X62
X64
X70
X78
X90

d1

d2

d3

d4

l1

l2

l3

l4

18
21
24
27.5
31
33
36
39
42
45
46.5
50
53
55
58.5
62.5
64
67
70
73
75.5
78.5
82
85
88
91
100
110
129

21
26
29
32
36
39
42
45
48
51
54
58
61
64
67
71
74
77
81
84
87
90
93
96
99
103
111
116
137

42
47
50
53
57
60
63
66
69
72
75
79
82
85
89
92
96
99
102
105
109
113
116
119
122
125
138
147
168

47
50
53
56
60
64
67
70
73
76
80
83
86
89
92
96
99
102
105
108
111
116
120
122
125
128
142
152
173

44
47
50
53
57
60
63
66
69
72
76
79
82
85
88
92
95
98
101
104
107
111
114
117
120
123
134
145
166

36
38
38
38
38
41
41
41
41
41
43
43
43
51
51
51
55
55
55
55
55
58
58
58
58
58
60
60
63

15
17
17
17
17
20
20
20
20
20
22
22
22
30
30
30
34
34
34
34
34
37
37
37
37
37
39
39
42

31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
41
41

6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
7.5
7.5

75

Mechanical seals Mechanical seals for pumps Metal bellows seals

MFL65
l 0,5
t
mx

Features
Stationary bellows
Single seal
Balanced
Independent of direction of rotation

Operating range (see note on page 1)

Shaft diameter: d1 = 16100 mm (0.63"4"),
(>100 mm on request)
Externally pressurized: p1 = 25bar (363 PSI),
(higher pressure possible, please inquire)
Internally pressurized:
p1 <120C (248F) 10bar (145 PSI),
p1 <220C (428F) 5bar (72 PSI),
p1 <400C (752F) 3bar (44 PSI)
Stationary seat lock necessary
Temperature: t = 20+400C (4F+752F)
Sliding velocity: vg = 50 m/s (165 ft/s)
d
19
24
30
35
40
45
51
60
70
82
88
100

76

d1
d2
1619
20.5
2024
25.5
2530
31.5
3135
36.0
3640
41.0
4145
46.0
4651
52.0
5260
61.0
6170
71.0
7182
83.5
8388
89.5
89100 101.0

d3
29
35
40
45
50
55
63
70
80
95
100
112

d4
30.3
38.8
43.6
45.8
51.5
55.2
64.7
70.6
82.8
98.0
107.7
112.7

d5
25.3
33.8
38.6
40.8
46.5
50.2
59.7
65.6
76.8
92.0
101.7
106.7

H8

d3

d6

d2

1.2
d1

1.1

Materials
Item Part no. to DIN 24250 Description
MFL65 EagleBurgmann
Bellows: Inconel 718 (M6), Hastelloy C-276 (M5)
1.1 472 und 481
Seal face and

bellows unit
Seal face: Carbon graphite antimony impregnated (A),
1.2 400.1
Flat gasket
Silicon carbide (Q12)
2 475
Seat
Seat: Silicon carbide (Q1), Special cast CrMo steel (S)
Metal parts: Duplex (G1), Carpenter 42 (T4),
Product variant
Hastelloy C-4 (M)
MFL69
Recommended applications
Shaft diameter: d1 = 16100 mm (0.64"4"),
Process industry
(>100 mm on request)
Oil and gas industry
Internally pressurized: p1 = 16bar (232 PSI),
Refining technology
(higher pressure possible, on request)
Petrochemical industry
Externally pressurized: p1 = 10bar (145 PSI),
Chemical industry
stationary seat lock necessary.
Hot media
Temperature: t = 20C+400C (4F+752F)
High sliding velocities
Sliding velocity: vg = 50 m/s (165 ft/s)
Pumps
Special rotating equipment

Advantages
For high temperature
High sliding velocities
No elastomer secondary seals

Dimensions in mm

d5

d4

d6
45.0
49.0
55.0
59.0
65.0
69.0
76.5
84.0
95.0
112.0
120.0
130.0

l
33.5
33.5
34.5
33.0
30.5
35.5
40.5
32.0
38.0
41.0
47.0
47.0

nxmx
4 x M4
4 x M4
6 x M4
6 x M4
6 x M4
6 x M4
6 x M5
6 x M5
6 x M5
6 x M6
6 x M6
6 x M6

t
6
6
6
6
6
6
7
7
7
7
7
7

Mechanical seals Mechanical seals for pumps Engineered seals

EK777
l
l2

l1
0,5

30

Operating range (see note on page 1)

Pressure (product seal): p = vacuum60bar (870 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 50 m/s (164 ft/s)
Viscosity:300 mPas
Solids content:0.3 %
Materials
Seal face: High density carbon graphite
Seat: Silicon carbide (Q1, Q2)
Secondary seals: FKM (V)
Metal parts: 1.4401 (G), 1.4301 (F)
Dimensions in mm
d
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110

d1
50
54
60
64
72
76
85
90
100
105
110
115
120
127
132
140
145
150
162

d2
40
46
51
56
63
68
76
82
90
93
99
104
111
117
120
129
132
137
144

d3
46
52
57
62
69
74
82
88
96
99
105
110
117
123
126
135
138
143
150

l
56
56
56
56
62
62
66
66
66
66
66
66
68
68
68
68
68
68
68

l1
27
27
27
27
31
31
33
33
33
33
33
33
35
35
35
35
35
35
35

1.5
d

1.4

1.6

30

Standards and approvals

API 682/ISO 21049
Recommended applications
Power plant technology
Oil and gas industry
LPG
Hot water
High pressure pumps
Compressors
Blowers
High speed pumps
Boiler feed pumps
LPG

d1

1.3

h7

1.1 1.2

d2

min

d3

Features
Single seal
Balanced
Independent of direction of rotation
Stationary multiple springs
Compact construction
API 682 (Type A) compliant seal
Angled set screw drive configuration ensures precise
vertical alignment of rotary seat
Distributed flush ensures even cooling flow to seal faces

H7

Item Description
1.1
Seal face
1.2, 1.5, 3, 5 O-Ring
1.3 Adapter
1.4 Spring
1.6
Snap ring
2 Seat
4
Drive collar
6
Set screw
Product variant
Configuration example
acc. to API 682 (1CW-FL)

l2
29
29
29
29
31
31
33
33
33
33
33
33
33
33
33
33
33
33
33

77

Mechanical seals Mechanical seals for pumps Engineered seals

HR
l
l1
t1

Direction of installation:
from the impeller side HR10
from the bearing side HR11

HR10

Features
Single seal
Balanced
Independent of direction of rotation
Multiple springs stationary
Seat rotating
Seat arranged directly behind the impeller
Spring protection sleeve
Variant with cylindrical spring and acc. EN 12756
(HRZ1) available
Variant as cartridge with/without guide sleeve for
application with/without quench (HR2, HR3)
Dual seal as cartridge unit (HRKS-D) available

Operating range (see note on page 1)

Shaft diameter: dN = 36270 mm (1.4"10.63")
Pressure: p1* = 16bar (230 PSI)
Temperature: t = 20C+160C (4F+320F)
Sliding velocity: vg = 10 m/s (33 ft/s)

* For operation under vacuum it is necessary to arrange for

quenching on the atmosphere side.

l9
l6

l5

l6

G2
(dN 3690 mm)

G2 EagleBurgmann

78

H11

H8

d6

d7

d5

k2

H8

H11

d7

d6

d8

20

R1

l2

H8

d4

H8

HR11

Materials
Item Part no. to DIN 24250
Seal face: Silicon carbide (Q1), (Q2) HR EagleBurgmann 1.1 472
Seat: Silicon carbide (Q1), (Q2)
1.2 520
2 412.1
Standards and approvals
3
474
EN 12756 (HRZ1)
4 477
5
475
Recommended applications
6 412.2
Process industry
7 412.3
Oil and gas industry
8 441
Refining technology
Chemical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Sugar industry
Cement industry
Dirty, abrasive and solids containing media
Sewage water pumps
Dredger pumps
Oil sand extraction
Scrubbers in flue-gas desulphurization plants (FGD)

Seat alternatives
+0,5

1.2
d9

l5

Advantages
Especially for application in solids containing media
without external flush or internal product circulation.
Solids content 40% (single seal) and 60% (double seal)
Operation under vacuum without seat locking possible
Pumping screw for increased circulation available
Springs are protected from product and leakage
No damage of the shaft by dynamically loaded O-Ring
Insensitive to shaft deflections due to stationary design

l7

1.1

d1h

h8

5
d1

0,1

d2

d 10

d3

d8

l 4 + 0,1

d 11

l3

G9G9
EagleBurgmann

(dN 95180 mm)

Description
Seal face
Sleeve
O-Ring
Thrust ring
Spring
Seat (G11)
O-Ring
O-Ring
Housing

Product variants
HR2
Cartridge-type single seal with guide sleeve (Item no. 2)
for use with quench. Insert (Item no. 1) either metal or
Silicon carbide.

dN

d1

1
1

d 1h

dN

d1

d 1h

HR3
Cartridge-type single seal. Insert (Item no. 1) either metal
or silicon carbide. Optional without maintenance rinsing.

HRZ1
Single seal with cylindrical spring and type G76 seat.
For installation in covers with installation dimensions
according to EN 12756 B or U. Installation length l11
corresponds to max. l1k. Intermediate sizes on request.

HRKS-D
Double seal in cartridge design for operation in barrier or
buffer pressure mode (does not open if barrier pressure
fails and closes automatically in the event of pressure
reversal), available alternatively with a pumping screw for
a higher rate of circulation. Torque transmission e.g. by
shrink disk.

HR2

HR3
l 10

H11

H8

d 13

1.1

max

5
4

d1h

l 16

d 12

1.2

l 13
HR3 EagleBurgmann
l 15

dN

d 11

1.1

l 12

d1

d3

d1

HR2 EagleBurgmann

d 14

HRKS-D
Dimensions in mm
d1
20
25
28
33
38
43
48
53
55
60
65
70
75
80
90
100
110
120
130
140
160
180
190
200
210
220
230
250

d1h
28
33
38
43
48
53
58
63
65
70
75
80
85
90
100
110
120
130
140
150
170
190
200
210
220
230
240
260

dN
36
41
46
51
56
61
66
71
75
80
85
90
95
100
110
120
130
140
150
160
180
200
210
220
230
240
250
270

d1h
33
39
50
60
72
90

d1
20
27
35
47
55
70

HRZ1

HRK D EagleBurgmann

d2
47.1
52.1
57.1
62.1
67.1
72.1
77.1
82.1
87.1
92.1
97.1
102.1
107.1
112.1
126.1
136.1
145.1
154.1
163.9
174.9
193.9
213.9
231.9
241.9
251.9
261.9
271.9
291.9

d3
65
70
75
80
85
90
95
101
106
111
116
121
126
131
147
157
167
177
188
189
220
240
255
265
275
285
295
315

HRZ1 Dimensions in mm
dN
35
43
54
66
77
100

l 11

d11
56
67
78
91
103
125

d12
42
54
65
77
88
110

d4
70
75
80
85
90
95
100
105
110
115
120
125
130
135
155
165
175
185
195
205
230
255
270
280
290
300
310
330

d5
46
51
56
61
66
69
76
81
86
91
96
101
107
107
117
132
142
152
162
172
187

d6
56.0
62.0
67.0
72.0
77.0
81.0
88.0
95.0
100.0
105.0
110.0
115.0
122.2
122.2
136.2
146.2
156.2
168.2
178.2
188.2
212.5

d7
63.0
70.0
75.0
80.0
85.0
90.0
97.0
105.0
110.0
115.0
120.0
125.0
134.3
134.3
148.3
158.3
168.3
180.3
190.3
200.3
224.3

d8
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5

d9
40
45
50
55
60
65
70
75
79
84
89
94
99
104
116
126
136
146
156
166
186
206
218
228
238
248
258
278

d10
38
43
48
53
58
63
68
73
78
83
88
93
98
103
117
127
136
145
155
166
185
205
220
230
240
250
260
280

d11 +0.2 min.

75
80
85
90
95
100
105
110
115
120
125
130
135
140
163
173
183
193
203
213
238
265
280
290
300
310
320
340

d13
48
61
73
85
97
120

d14
3
4
4
4
4
4

l10
57.7
57.7
59.8
66.0
74.5
82.0

l11
49.2
49.2
52.1
58.0
66.0
73.0

l12
15.0
15.0
15.5
16.5
17.5
21.0

l13
42.7
42.7
44.3
49.5
57.0
61.0

l15
2.0
2.0
2.5
2.5
2.5
3.0

l16
5
6
6
6
7
7

l
75
75
75
75
75
75
75
75
75
75
75
75
75
75
98
98
98
98
98
98
98
98
115
115
115
115
115
115

l1
53
53
53
53
53
53
53
53
53
53
53
53
53
53
73
73
73
73
73
73
73
73
83
83
83
83
83
83

l2
20
20
20
20
20
20
20
20
20
20
20
20
20
20
30
30
30
30
30
30
30
30
40
40
40
40
40
40

HRZ1 EagleBurgmann

l3
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
28.35
28.35
28.35
28.35
28.35
28.35

l4
17
17
17
17
17
17
17
17
17
17
17
17
17
17
19
19
19
19
19
19
19
19
24.7
24.7
24.7
24.7
24.7
24.7

l5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
10.5
16.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
19.0
19.0
19.0
19.0
19.0
19.0

l6
6
6
6
6
6
7
7
7
7
7
7
7
10
10
10
10
10
10
12
12
12

l7
9
9
9
9
9
9
9
9
9
9
9
9
12
12
12
12
12
12
12
12
12

l9
8.0
9.5
9.5
10.5
10.5
11.0
11.5
11.5
11.5
13.0
13.0
13.0
20.0
20.0
20.0
20.0
20.0
22.0
24.0
24.0
28.0

k2
51.0
56.5
61.5
66.5
71.5
75.0
82.0
88.0
93.0
98.0
103.0
108.0
114.5
114.5
126.5
139.0
149.0
160.0
170.0
180.0
199.5

t
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0

t1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5

79

Mechanical seals Mechanical seals for pumps Engineered seals

HRC...N

1.2

12

1.1.1 1.1.2

Features
Cartridge
Balanced
Independent of direction of rotation
Stationary multiple springs
Variant with short installation length (HRC1100N)
Spring protection sleeve
Variant for operation with pressureless quench available
(HRC2000N)
Dual seal with and without pumping screw (HRC3300NF,
HRC3300N) available
Advantages
Insensitive to solids containing media. Solids content
40% (single seal) and 60% (double seal)
Springs are protected from product and leakage
Broad field of application due to modular system
Optimal for standardization purposes
Variant with short installation length to meet limited
space conditions (HRC1100N)
Seal remains closed in case of barrier pressure failure,
self-closing at pressure reversal (HRC3300NF)
Operation under vacuum without seat locking possible
Pumping screw for increased circulation available
No damage of the shaft by dynamically loaded O-Ring
Insensitive to shaft deflections due to stationary design
Straightforward installation due to pre-assembled unit
Installation errors are excluded
No damage caused by dirt entered during assembly

80

2 4

24

1.1.3

Operating range (see note on page 1)

HRC3300NF
HRC3200NF
Shaft diameter: d10 = 3060 mm (1,181"...
With uni-directional pumping screw. Dual seal remains
2,362") EagleBurgmann
closed in case of barrier pressure failure and closes in
Pressure: p1 = 23bar (334PSI)
the event of pressure reversal. With guide sleeve (item
Temperature: t = 20C+160 (200*)C
no. 12). Operation as single seal with quench possible.
(4F+320 (382*)F)
Encapsulated stationary seat on the product side (bursting
Sliding velocity: vg = 20 m/s (66 ft)
protection). Parted seal sleeve for application of highly
Axial movement: 1.0 mm
restistant materials e.g. Hastelloy.
* Due to shrinking
Materials
Seal face: Silicon carbide (Q1, Q2)
Seat: Carbon graphite antimony impregnated (A),
Siliconcarbide (Q1, Q2)
Standards and approvals
DIN 24960 C
Recommended applications
Chemical industry
Process industry
Petrochemical industry
Mining industry
Sugar industry
Dirty, abrasive and solids containing media
Various chemical processes
Chemical standard pumps

Item Part no. to DIN 24250

1.1.1 472.1
1.1.2 474
1.1.3 477.1
1.2 475.1
2
523
4 513
8
160
9
509
12

19
24

Description
Seal face
Thrust ring
Spring
Seat
Shaft sleeve
Insert
Cover plate
Spring carrier
Spring protection
sleeve
Plug
Assembly fixture

Produktvarianten
HRC1000N
Single seal

HRC2000N
Single seal with pressureless quench for cooling,
featuring guide sleeve (Item no. 12) baffle (Item no. 17),
adapter (Item no. 15) and lip seal (Item no. 13) on the
atmosphere side. Option: Throttle ring for sealing steam
quench on the atmosphere side.

HRC1100N
ASame design as HRC1000N, but with a shorter cover
plate featuring integral spring and drive pin pockets (Item
no. 8). No adapter (Item no. 9). Shaft sleeve (Item no. 2)
uncoated. Differs from modular system!

24

12

HRC1000N

4)

+0.5

5)

h8

6)

d175)
85
95
110
125
7)

+7

d181)6) d19
95
110
125
140
8)

+0.1

9)

0.1

l 21
d 10

0,005 A B

l 24

0,005
l8

1,6
1,6

l138)
4
4
4
4

l14
20
22
25
30

l15 l16
1
1
1
1

l17
16
18
21
26

l18
0.5
0.5
0.5
0.5

l19
55
60
60
60

l20
39
44
44
44

l21
35
40
45
50

l22
35
40
45
50

l23
39
44
44
44

l24 9) l25
2
0.5
2
0.5
2
0.5
2
0.5

S
M10
M12
M12
M12

1,6

1,6

20

l 16
(l 17)

20

Mating surface
Auflageflche

1) 1)
Dichtflche
Sealing
surface

gerundet
rounded

1,6

l122)7)
4
4
4
4

l 12
l 13

Anlageflche
Mating
surface

G1/ 8

l9

d13

d15

d 19

d12

d16

min

d22

d17

d 18

d11

l2

Example
Beispieloffr
assembly
fixture
Montagehilfe

20

d14

l112)7)
50
52
55
70

View XX
Ansicht

0,05 A B

Seal
face Gleitring
Gegenring
seat

The
axial position
the sailing surface
Die axiale
Lage derof Dichtflche
der
of
the secondary seals
are determined
Nebendichtungen
wird durch
das Ma lby
bestimmt.
13 the
dimension l13 of the pump.
11))

l10
15
15
15
20

min 1

0,005
Z

l9
10
10
12
14

Gleitringdichtung
mit stationrem
design C.
Mechanical
seal with Federteil,
stationaryAusfhrung
spring unit, C.
In der Zeichnung
ist eine shows
DoppelGLRD
The drawing
a doubledargestellt.
mechanical seals.

Bauteilgrenze
Seal
standout limit

max

l87)
115
130
140
166

G3/8

AB

d22
86
96
111
126

0.05

l 25
0,05

d21
129
155
168
185

0,2 C

l 19
0,005 A B

l 11

d20
110
130
145
160

l 23

0.2

d15 4) d16
44
82
54
92
66
105
76
120

l 20
15

3)

d142)
41
51
61
67

l 19

+0.2

d133)
35
45
55
61

d 21

2)

H7

d122)
31
41
51
61

d 20

1)

d111)
24
32
42
50

HRC2000N EagleBurgmann

d19 < d20

d101)
30
40
50
60

13

15

HRC2000N

HRCN EagleBurgmann

Dimensions in mm

17

1.1.3

G3/8

1.1.2

1.1.1

19

l 22

12

l 20

1.2

15

l 15

l 14

Seal dimensions acc. DIN 24960 EagleBurgmann

81

Mechanical seals Mechanical seals for pumps Engineered seals

SH(V)

14

1.11

1.2

1.1.3

Features
Cartridge design
Single seal
Balanced
Stationary spring loaded unit
Shrink-fitted seal face
Multiple springs
Advantages
Deformation-optimized seal for high pressures and high
sliding velocities (static up to 500 bar and dynamic up to
150 bar)
Economical due to standardized inner components
High flexibility due to adaptation of the connection parts
to the pump seal chamber
Insensitive to shaft deflections due to stationary design
Pre-assembled unit for quick and easy installation
Suitable for use in compliance with API 682, type ES
Version with loose-fitted seal face available, for extreme
applications
Only small number of components
Operating range (see note on page 1)
Shaft diameter: d1* = 40250 mm (1.57"9.84")
Pressure: p1 = 150bar (2.175 PSI)
Temperature: t = 200C (394F)
Sliding velocity: vg = 60 m/s (197 ft/s)
Axial movement: 3 mm

* Other sizes on request

82

Materials
Item Description
Seal face: SiC-C-Si, silicon impregnated carbon (Q3),
1.1.1 Seal face
SHV EagleBurgmann
Carbon graphite, antimony impregnated (A)
1.1.3 Spring
Seat: Silicon carbide (Q)
1.2 Seat
Secondary seals: FKM (V), EPDM (E), FFKM (K)
2
Shaft sleeve
Springs: Hastelloy C-4 (M)
6 Housing
9
Assembly fixture
Metal parts: CrNiMo steel (G), Duplex (G1),
14
Shrink disk
Super Duplex (G4), Titanium (T2), Hastelloy C-4 (M)
Standards and approvals
API 682/ISO 21049
Recommended seal supply
API Plan 11, 31, 32, 61, 62, 13, 41
Recommended applications
Power plant technology
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Pulp and paper industry
Water and waste water technology
Hot water
Sour water
Caustic soda
Amines
Crystallizing media
Crude oil
Process water
Crude oil feed pumps
Injection pumps
Multi-phase pumps

Product variant
SH(V)I
Same design as SH(V) but with loosely inserted seal face
for extreme applications.
Pressure: p1 = 200bar (2,900 PSI)

Mechanical seals Mechanical seals for pumps Engineered seals

SHF/SHP

14

1.1.1
6

Features
Cartridge design
Single seal
Balanced
Dependent of direction of rotation
Integrated pumping device
Stationary spring loaded unit
Shrink-fitted seal face
Multiple springs
Advantages
Deformation-optimized seal for high sliding velocities
and medium pressures
Economical due to standardized inner components
Universal application for OEM or retrofits of boiler feed
water pumps with floating ring seals, labyrinths or
packings
High flexibility due to adaptation of the connection parts
to the pump seal chamber
Optimum heat dissipation due to integrated pumping
device and optimized seat design
Insensitive to shaft deflections due to stationary design
Pre-assembled unit for quick and easy installation
Only small number of components
Short built
Operating range (see note on page 1)
Shaft diameter: d1* = 40250 mm (1.57"9.84")
Pressure: p1 = 50bar (725 PSI)
Temperature: t = 300C (572F)
Sliding velocity: vg = 60 m/s (197 ft/s)
Axial movement: 3 mm

1.1.3

1.2
8

Materials
Item Description
SHF EagleBurgmann
Seal face: Silicon carbide (Q), Carbon graphite antimony
1.1.1 Seal face
impregnated (A), Carbon graphite resin impregnated (B)
1.1.3 Spring
Seat: Silicon carbide (Q)
1.2 Seat
Secondary seals: EPDM (E), FFKM (K)
2
Shaft sleeve
Springs: CrNiMo steel (G)
6 Cover
Metal parts: CrNiMo steel (G)
8
Pumping screw with flow guide
9
Assembly fixture
Recommended seal supply
14
Shrink disk
API Plan 23
Product variant
Recommended applications
SHF4
Power plant technology
Single mechanical seal with integrated jacket cooling,
Oil and gas industry
for boiler feed pumps.
Refining technology
Petrochemical industry
Chemical industry
Boiler feed water pumps

* Other sizes on request

83

Mechanical seals Mechanical seals for pumps Engineered seals

SHPV/SHFV

1.1.4

Features
Cartridge design
Single seal
Balanced
Dependent of direction of rotation
Integrated pumping device
Stationary spring loaded unit
Shrink-fitted seal face
Multiple springs
Advantages
Deformation-optimized seal for highest pressure levels
Economical due to standardized inner components
High flexibility due to adaptation of the connection parts
to the pump seal chamber
Optimum heat dissipation due to integrated pumping
device and optimized seat design
Insensitive to shaft deflections due to stationary design
Pre-assembled unit for quick and easy installation
Only small number of components
Operating range (see note on page 1)
Shaft diameter: d1* = 40250 mm (1.57"9.84")
Pressure: p1 = 150bar (2,175 PSI)
Temperature: t = 350C (662F)
Sliding velocity: vg = 60 m/s (197 ft/s)
Axial movement: 3 mm

* Other sizes on request

1.1.1

1.2

1.1.3

Materials
Item Description
Seal face: Carbon graphite antimony impregranted (A)
1.1.1 Seal face pressure-stabilized
SHPV EagleBurgmann
Seat: Silicon carbide (Q)
1.1.3 Spring
Secondary seals: EPDM (E), FFKM (K)
1.1.4 Back-up ring
Springs: CrNiMo steel (G)
1.2 Seat
Metal parts: CrNiMo steel (G)
2
Seat housing with pumping screw (F)

or pumping ring (P)
Recommended seal supply
6 Cover
API Plan 23
9
Assembly fixture
Recommended applications
Power plant technology
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Boiler feed water
Boiler circulation pumps

Product variant
SHFV
Same design as SHPV but with pumping screw.

2
1.1.4

1.1.1

1.2

1.1.3

SHFV EagleBurgmann

84

Mechanical seals Mechanical seals for pumps Engineered seals

SAF(V)/SAP(V)

6
8

Features
Cartridge design
Single seal
Balanced
Dependent on direction of rotation
Integrated pumping device
Stationary spring loaded unit
Inserted seal face
Rotating carbon seat
Advantages
Deformation-optimized seal for high sliding velocities and
medium pressures
Economical due to standardized inner components
High flexibility due to adaptation of the connection parts
to the pump seal chamber
Optimum heat dissipation due to integrated pumping
device and optimized seat/seal face design
Insensitive to shaft deflections due to stationary design
Pre-assembled unit for quick and easy installation
Only small number of components
Operating range (see note on page 1)
Shaft diameter: d1* = 120250 mm (4.72"9.84")
Pressure: p1 = 50bar (725 PSI)
Temperature: t = 300C (572F)
Sliding velocity: vg = 65 m/s (213 ft/s)
Axial movement: 3 mm

* Other sizes on request

5
4

2 9
10

Materials
Item Description
SAFV1 EagleBurgmann
Seal face: Silicon carbide (Q), SiC-C-Si,
1
Seal face
silicon impregnated carbon (Q3)
2, 4 O-Ring
Seat: Carbon graphite resin impregnated (B), SiC-C-Si,
3 Spring
silicon impregnated carbon (Q3)
5
Seat collar
Secondary seals: EPDM (E), FFKM (K)
6 Seat
Springs: CrNiMo steel (G)
7
Shaft sleeve
Metal parts: CrNiMo steel (G)
8
Pumping sleeve
9 Cover
Recommended seal supply
10 Throttle ring
API Plan 02 + 23 (with jacket cooling)
Recommended applications
Power plant technology
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Boiler feed water with low conductivity
Boiler feed pumps

85

Mechanical seals Mechanical seals for pumps Engineered seals

SHF(V)-D/SHP(V)-D

14

12

10

1.2

1.1.1

6
1.1.3

Features
Cartridge-Design
Doppeldichtung
Entlastet
Integrierte Pumpeinrichtung
Stationr befederte Einheit
Gruppenbefederung
Geschrumpfter Gleitring
Zentraler Gegenring
Advantages
Deformation-optimized seal for high pressures and high
sliding velocities (static up to 500 bar (7,250 PSI)) and
dynamic up to 150 bar (2,175 PSI)
Economical due to standardized inner components
High flexibility due to adaptation of the connection parts
to the pump seal chamber
Optimum heat dissipation due to integrated pumping
device
Insensitive to shaft deflections due to stationary design
Pre-assembled unit for quick and easy installation
Dual seal does not open even in the event of barrier fluid
pressure failure
Reliable operation due to one rugged seat with bandage
Suitable for use in compliance with API 682, type ES
Version with loose-fitted seal face available, for extreme
applications
Only small number of components
Operating range (see note on page 1)
Shaft diameter: d1* = 40250 mm (1.57"9.84")
Pressure: p3 = 150bar (2,175 PSI)
Temperature: t = 200C (392F)
Sliding velocity: vg = 60 m/s (197 ft/s)

* Other sizes on request

86

Materials
Item Description
Seal face: SiC-C-Si, silicon impregnated carbon (Q3),
1.1.1 Seal face
Carbon graphite, antimony impregnated (A)
1.1.3 Spring
SHFVD EagleBurgmann
Seat: Silicon carbide
1.2 Seat
Secondary seals: FKM (V), EPDM (E), FFKM (K)
2
Shaft sleeve
Springs: Hastelloy C-4 (M)
4
Clamping sleeve
6 Housing
Metal parts: CrNiMo steel (G), Duplex (G1),
Super Duplex (G4), Pure Titanium (T2), Hastelloy C-4 (M) 8 Cover
10
Pumping sleeve
Standards and approvals
12
Assembly fixture
14
Shrink disk
API 682/ISO 21049
Recommended seal supply
API Plan 53A, 53B, 53C, 54
Recommended applications
Oil and gas industry
Refining technology
Petrochemical industry
Power plant technology
Chemical industry
Volatile and non-volatile hydrocarbons
Crude oil
Process water
Crude oil feed pumps
Injection pumps
Multi-phase pumps

Product variants
SHF(V)I-D/SHP(V)I-D
Same design as SHF(V)-D/SHP(V)-D but with loosely
inserted seal face for extreme applications.
Pressure: p1 = 200bar (2,900 PSI)

87

Mechanical seals Mechanical seals for pumps Split seals

Splitex
l1
l2
l4
l3
13

16 7 15 5 4 2
6

l5

Operating range (see note on page 1)

Shaft diameter: d1 = 50150 mm
(1.940"6.000")
Pressure: p1 = 10bar (145 PSI)
Temperature: t = 40+150C (40+300F),
above 80C (175F) flush is recommended
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: 1.5 mm (1/16")
Radial movement: 0.8 mm (1/32")
Materials
Seal face: Carbon graphite antimoniny impregnated (A),
Silicon carbide (Q6)
Seat: Silicon carbide (Q6)
Secondary seals: FKM (V), EPDM (E), NBR (P)
Springs: CrNiMo steel (G)
Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)

88

3 11

10

17

Item Description
1
Seal face
2, 5, 7 O-Ring
3 Spring
4 Seat
6 Driver
8
Thrust ring
9
Clamp collar
10 Housing
11
Assembly fixture
12, 15 Gasket
13
Head Screw plug
14
Mounting plate
16
Set screw
17
HSH Cap screw

SPLITEX EagleBurgmann

Recommended applications
Process industry
Petrochemical industry
Chemical industry
Power plant technology
Pulp and paper industry
Pulp
Centrifugal pumps
Agitators
Displacement pumps
Conveying pulp with stock pumps
Conveying timber to refiners with pumping screws
Circulation of pulp-and-water mixtures in storage vessels
Pump stations for waste water treatment
Cooling water pumps for energy generation

14

Advantages
Reduced repair and downtime: 2x2 pre-assembled
design speeds up and simplifies installation because
pump does not have to be disassembled.
Long service life: precise pre-alignment because of
pre-assembled segments. Stationary springs which are
protected from the product prevent clogging.
Greater flexibility during installation: no modification
necessary because the seal is located outside of the
stuffing box.
Shaft protection: uniform torque transmission via
clamping ring prevents damage caused by set screws.
Dependable operation: mechanical decoupling of
clamping ring (torque transmission) avoids distortion of
the seat.
Simple monitoring of the seal during operation because
of mechanical wear indicator on the seal face.
Low leakage: elimination of secondary seals eliminates
leakage paths between split components.
High tolerance to shaft deflections ensured by stationary
design and elastic seat mounting (gasket).

Features
Fully split single seal, 2 x 2 segments, pre-assembled
Semi-cartridge
Balanced
Stationary springs
Bi-directional
External pressurization
Built-in flushing connections
Installation and wear control

DW

d1

d2

12 9

Da

Seal cover

SPLITEXGussSeite EagleBurgmann

Dimensions in mm
Dw
50
60
70
80
90
100
110
120
125
140
150

Dw
1.969
2.362
2.756
3.150
3.543
3.937
4.331
4.724
4.921
5.512
5.906

d1
75
89
98
110
121
131
142
152
162
175
188

d2
84
101
113
132
140
150
165
175
185
200
215

Dimensions in inch
Dw
1.940
2.000
2.125
2.375
2.438
2.500
2.750
2.938
3.000
3.250
3.500
3.625
3.750
3.875
4.000
4.250
4.500
4.750
5.000
5.500
6.000

Dw
49.276
50.800
53.975
60.325
61.925
63.500
69.850
74.625
76.200
82.550
88.900
92.075
95.250
98.425
101.600
107.950
114.300
120.650
127.000
139.700
152.400

d1
2.953
2.953
3.110
3.504
3.642
3.642
3.858
4.213
4.213
4.331
4.764
4.764
4.921
5.157
5.157
5.591
5.984
5.984
6.378
6.890
7.402

Da
138
149
176
191
203
216
230
240
268
303
308

d2
3.307
3.307
3.465
3.976
4.114
4.114
4.449
4.803
4.803
5.197
5.512
5.512
5.630
5.906
5.906
6.496
6.890
6.890
7.283
7.874
8.465

a
88
105
118
135
145
155
170
180
190
205
220

Da
5.433
5.433
5.787
5.866
6.181
6.181
6.929
7.559
7.559
7.520
7.992
7.992
8.110
8.504
8.504
9.055
9.449
9.449
10.551
11.929
12.126

s
15
17.5
20
20
22
22
22
22
26
26
26

a
3.456
3.456
3.622
4.134
4.272
4.272
4.646
5.000
5.000
5.315
5.709
5.709
5.827
6.102
6.102
6.693
7.087
7.087
7.480
8.071
8.661

l1
63
64
64
65
72.5
72.5
72.5
72.5
89.5
89.5
89.5

l2
61
62
62
63
70.5
70.5
70.5
70.5
87.5
87.5
57.5

s
0.591
0.591
0.591
0.689
0.689
0.689
0.787
0.787
0.787
0.787
0.866
0.866
0.866
0.866
0.866
0.866
0.866
0.866
1.024
1.024
1.024

l3
30
30
30
31
31.5
31.5
31.5
31.5
43.5
43.5
43.5

l1
2.480
2.480
2.480
2.520
2.520
2.520
2.520
2.559
2.559
2.559
2.854
2.854
2.854
2.854
2.854
2.854
2.854
2.854
3.524
3.524
3.524

l4
45
46
46
47
50.5
50.5
50.5
50.5
62.5
62
62.5

l2
2.402
2.402
2.402
2.441
2.441
2.441
2.441
2.480
2.480
2.480
2.776
2.776
2.776
2.776
2.776
2.776
2.776
2.776
3.445
3.445
3.445

l5
3
3
3
3
3
3
3
3
4
4
4

l3
1.181
1.181
1.142
1.181
1.181
1.181
1.181
1.299
1.299
1.220
1.240
1.240
1.240
1.240
1.240
1.240
1.240
1.240
1.713
1.713
1.713

X
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT

l4
1.772
1.772
1.772
1.811
1.811
1.811
1.811
1.850
1.850
1.850
1.988
1.988
1.988
1.988
1.988
1.988
1.988
1.988
2.461
2.461
2.461

l5
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.157
0.157
0.157

X
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
3/8 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT
1/2 NPT

89

Mechanical seals Mechanical seals for pumps Split seals

HGH201
l4 0,1

l3

2
f

15
15

mx

90

H7

d5

l8

1.4

+0,1

l1

Product variants
HGH211
HGH EagleBurgmann Dimensions, items and descriptions as HGH201. Item 1.2
driver collar is modified for securing on stepped shafts.
Unsplit as original equipment: Designation HGH210.
l 11

1) For

disassembly of unsplit seal faces, seats and O-Ring these

should be broken or cut.

l 33

d6

1.2

22

h8

3 x 120
offset

d11

Item Description
1.1
Seal face1)
1.2
Drive collar
1.3, 1.4, 1.7, 3 O-Ring1)
1.5 Spring
1.6
Set screw
2
Stationary seat1)

Torque transmission
Operating range (see note on page 1)
Shaft diameter: d1 = 50310 mm (2"12.20")
(larger diameters on request)
Pressure: p1 = 25bar (363 PSI)
Temperature: t1 = 150C (302F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Axial movement: 2.0 mm
105
Set screw withd1cone
pointmm
EagleBurgmann
Set screws with
Materials
cone point
Seal face: Silicon carbide (Q1)
4 x offset by 90
Seat: Silicon carbide (Q1, Q2),
Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
Secondary seals: FKM, (V), EPDM (E), NBR, (P)
Metal parts: CrNiMo steel (G)
Recommended applications
Pulp and paper industry
Water and waste water technology
Shipbuilding
Sea water desalination
Pulp with up to 5% fiber content
Water turbines
Chest agitators
Stern tubes
Cooling water pumps
Gears
Defibrators

d1

d3

Advantages
Economical: no complete dismantling of pump necessary
Reduction of down-times and installation times
Springs are protected from the product
Rugged seal design
Split seat can be used on both sides

1.1

Features
For plain shafts (HGH201)
Semi split single seal
Multiple springs rotating
Balanced
Independent of direction of rotation
Unsplit as original equipment (HGH200)
Cartridge available (based on HGH210)
Variant for stepped shafts available (HGH211)
Splitted seal parts: sliding faces and O-Rings

1.2

1.7

d4

1.5

d2

1.3

h8

1.6

HGH301
Stationary design for stepped shafts.
Unsplit as original equipment:
Designation HGH300.
HGH211 EagleBurgmann
Seal face also available in carbon graphite resin
impregnated (B). Dimensions on request.

HGH300 EagleBurgmann

Dimensions in mm
d1
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
220
230
240
250
260
270
280
290
300
310

d11
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
210
220
230
240
250
260
270
280
290
300

d2
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
192
197
202
207
212
217
222
232
242
252
262
272
282
292
302
312
322

d3
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
255
260
270
280
290
300
310
320
330
340
350
360

d4
80.5
85.5
90.5
95.5
100.5
105.5
110.5
115.5
120.5
125.5
130.5
135.5
140.5
145.5
150.5
155.5
160.5
165.5
170.5
175.5
180.5
185.5
190.5
195.5
200.5
205.5
212.5
217.5
222.5
227.5
232.5
237.5
242.5
252.5
262.5
272.5
282.5
295.5
305.5
315.5
325.5
335.5
345.5

d5
89.6
94.6
99.6
104.6
109.6
114.6
119.6
124.6
129.6
134.6
139.6
144.6
149.6
154.6
159.6
164.6
169.6
174.6
179.6
184.6
189.6
194.6
199.6
204.6
209.6
214.6
224.6
229.6
234.6
239.6
244.6
249.6
254.6
264.6
274.6
284.6
294.6
307.6
317.6
327.6
337.6
347.6
357.5

d6
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
205
210
215
225
235
245
255
265
275
285
295
305
315

l1
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
95.3
104.2
104.2
104.2
104.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2
109.2

l11
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
75.3
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2
84.2

l3
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
72
72
72
72
77
77
77
77
77
77
77
77
77
77
77
77
77

l33
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52

l4
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4

l8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0

R
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5

f
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8

mx
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10

91

Mechanical seals Mechanical seals for pumps Gas-lubricated seals

Cartex-GSDN
l5
( l7)
l6

l4

h6

d1

Differential pressure (p3 p1) = min. 3bar (44 PSI)

Operating temperature limits for:
EPDM 20C+140C (4F+284F)
FFKM 20C+120C (4F+248F)
FKM 20C+170C (4F+338F)
Sliding velocity: vg = 415 m/s (1349 ft/s)
Axial movement: 1.0 mm
Materials
Seal face: Silicon carbide (Q1/Q19)
Seat: Silicon carbide (Q19/Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K)
Spring: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), Hastelloy C-4 (M)

92

10 9 11

19

14 17 13 5 22 6 8

12 7 15

Item Description
da
1, 9
Seal face
CARTEX GSDN EagleBurgmann
2, 5, 7, 10, 12, 18 O-Ring
45
45
3 Spring
4, 11
Seat
6
Shaft sleeve
8 Cover
13 Retainer
14 Ring
15
Set screw
a2
16
Retaining ring
17
Counter-sunk socket screw
19
Set ring
20
Assembly fixture
Seal cover
CARTEX GSDN EagleBurgmann
21
HSH Cap screw
22 Gasket

Features
Stationary springs
Rotating seat
Double seal
Balanced
Cartridge unit
Standard version with V-grooves, U-grooves optional
(independent of direction of rotation)
Gas-lubricated, gas-buffered
Internally pressurized
Does not open in the event of buffer pressure failure,
self closing at pressure reversal

Advantages
Contact-free operation
No friction on the seal faces, no heat generated at the
seal or in the medium
No additional complex components to dissipate frictional
heat
Maximum environmental protection and maximum
efficiency

Operating range (see note on page 1)
Shaft diameter: d1 = 30100 mm (1.18"3.94")
Pressure:
p1 = 13bar (189 PSI), p3 = 16bar (232 PSI)
with V-grooves (uni-directiona)
p1 = 9bar (131 PSI), p3 = 12bar (174 PSI)
with U-grooves (bi-directional),

16 18

d2

d3

21
20

Recommended applications
Chemical industry
Refining technology
Gases and liquids
Media which require high purity
Environmental harmful media
Pumps
Dimensions in mm
d1
30
33
35
38
40
43
45
48
50
53
60
65
70
75
80
90
100

d2
52
55
57.5
61
61
64
67
70
71
75.3
83.5
93
101
107
111
121
130

d3min
54
57
59
63
63
66
68
71
73
77
85
95
102
108
111
121
132

d3max l4
57
25.4
60
25.4
62
25.4
70
25.4
70
25.4
70
25.4
75
25.4
77
25.4
78
25.4
82
28.5
90
28.5
102
25.4
110
25.4
119
28
124
28
131
28
144
28

l5
86
86
86
86
86
86
86
86
86
89
89
100
100
107
107
107
107

l6
33
33
33
33
33
33
33
33
33
33
33
41.6
41.6
41.6
41.6
41.6
41.6

l7
53
53
53
53
53
53
53
53
53
56
56
58.4
58.4
65.4
65.4
65.4
65.4

a2
67
70
72
75
77
80
82
85
87
97
104
116
124
129
129
140
154

da
105
108
110
123
123
133
138
138
148
148
155
163
178
193
198
205
218

s
14
14
14
14
16
16
16
16
16
18
18
18
18
18
18
22
22

Mechanical seals Mechanical seals for pumps Gas-lubricated seals

EM300
l
l1

l2
0,5

Materials
Seal face: Special carbon
Seat: Silicon carbide (Q1, Q2)
Secondary seals: FKM (V)
Metal parts: 1.4401 (G)
Dimensions in mm
dmax.
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

d1
50
54
60
64
72
76
85
90
100
105
110
115
120
127
132
140
145

d2
40
46
51
56
63
68
76
82
90
93
99
104
111
117
120
129
132

d3
46
52
57
62
69
74
82
88
96
99
105
110
117
123
126
135
138

l
56
56
56
56
62
62
66
66
66
66
66
66
68
68
68
68
68

l1
27
27
27
27
31
31
33
33
33
33
33
33
35
35
35
35
35

l2
29
29
29
29
31
31
33
33
33
33
33
33
33
33
33
33
33

1.1 1.5

1.2

1.7

d h7
H7
d1

4
3

1.6

1.4

30

1.3

Standards and approvals

API 682/ISO 21049
Recommended applications
Chemical industry
Refining technology

Features
Balanced
Independent of direction of rotation
Stationary multiple springs
API 682 arrangement 2 containment seal

Advantages
Dry contact secondary seal
Prevention of hazardous emissions
Can be used as a secondary seal of tandem seal in liquid
applications

Operating range (see note on page 1)
Pressure: p = 2bar (29 PSI) normal operation,
max. 60bar (870 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 25 m/s (82 ft/s)

6
d2

d3

min

30

Item Description
1.1
Seal face
1.2 Adapter
EM300 EagleBurgmann
1.3 Spring
1.4
Thrust ring
1.5, 1.7, 4, 5 O-Ring
1.6
Retaining ring
2 Seat
3
Drive collar
6
Set screw

Product variant
Configuration example
acc. to API 682 (1CW-FL)

EM30045 Cartridge EagleBurgmann

93

Mechanical seals Mechanical seals for pumps Gas-lubricated seals

CGSH-K
l1K

94

H8 4)

H11 3)

d6

d1

h6

Standards and approvals

EN 12756
API 682/ISO 21049

d2

d3

Materials
Seal face: Carbon graphite antimony impregnated (A),
Silicon carbide (Q2),
alternatively: Carbon graphite resin impregnated (B),
Silicon carbide (Q1)
Seat: Silicon carbide (Q1, Q2),
Silicon carbide (Q19, Q29) with seal face in Q1 resp. Q2
Metal parts: CrNiMo steel (G)

2)

* Depending on resistance of O-Rings

3 1)

R1,

>105: 2 mm x 30
>105: 30
3) d >105: +0.1
1
4) d >105: H7
1
5) 3 x 120
2) d

1.1

10

Features
For stepped shafts
Rotating spring
Single or double seal available
Balanced
Standard version with U-grooves, V-grooves optional
(dependent of direction of rotation)
Gas-lubricated
Does not open in the event of buffer pressure failure,
self closing at pressure reversal

Advantages
Contact-free operation, no friction
No differential pressure required with hard/soft material
combination
Applicable as containment seal acc. to API682

Operating range (see note on page 1)
Shaft diameter: d1 = 28125 mm (1.10"4.92")
Pressure: p1 = 25bar (363 PSI)
Temperature: t* = 20C+170C (4F+338F)
Sliding velocity: vg = 425 m/s (1382 ft/s)

1.6 5) 1.2

1) d

l6

l5

1.4 1.5 1.3

+0,5

d7

l7

l2

mx
f
CGSH K EagleBurgmann

Recommended applications
Chemical industry
Refining technology
Gases and liquids (single seals only gas)
Gases and liquids which must not get into the
atmosphere (dual seal)
Gases not harmful to the enivronment (single seal)
Fans
Small steam turbines
Blowers
Roots compressors
Pumps

Item Part no. to DIN 24250

1.1 472
1.2 412.1
1.3 474
1.4 485
1.5 477
1.6 904
2 475.1
3 412.3

Description
Seal face
O-Ring
Thrust ring
Drive collar
Spring
Set screw
Seat
O-Ring

Product variants
CGSH-KD
Double seal back-to-back, buffered with gas, according to
API 682 configuration 3NC-BB, Plan 74.
Items, descriptions and unspecified dimensions as for
CGSH-K. .

Tandem arrangement acc. to API 682 3rd Edition

Configuration: 2CW-CS, Plan 72, 75, 76.
For media with a gaseous leakage. H75VN on the product
side. In case of a failure, the CGSH on the atmosphere
side, works as a liquid seal.

Pressure: p1 =22bar (319 PSI),

p3 =25bar (363 PSI)
(over the whole nominal diameter range, higher values
on request).
Differential pressure p = min. 3 bar (44 PSI)
Other operating limits as CGSH-K.
l 1'

GBI
74

CSV
76

GBI
72

l 4'

CSD
75

CGSH KD EagleBurgmann

Dimensions in mm
d1
28*
30*
32*
33*
35*
38*
40*
43*
45*
48*
50*
53*
55*
58*
60*
63*
65*
70*
75*
80*
85*
90*
95*
100*
105*
110*
115*
120*
125*

d2
33
35
38
38
40
43
45
48
50
53
55
58
60
63
65
68
70
75
80
85
90
95
100
105
115
120
125
130
135

d3
53
55
60
60
62
65
67
70
72
75
77
84
86
89
91
94
97
104
109
114
119
124
129
132
153
158
163
168
173

d6
37.0
39.0
42.0
42.0
44.0
49.0
51.0
54.0
56.0
59.0
62.0
65.0
67.0
70.0
72.0
75.0
77.0
83.0
88.0
95.0
100.0
105.0
110.0
115.0
122.2
128.2
136.2
138.2
142.2

d7
43.0
45.0
48.0
48.0
50.0
56.0
58.0
61.0
63.0
66.0
70.0
73.0
75.0
78.0
80.0
83.0
85.0
92.0
97.0
105.0
110.0
115.0
120.0
125.0
134.3
140.3
148.3
150.3
154.3

l1K
50.0
50.0
50.0
50.0
50.0
52.5
52.5
52.5
52.5
52.5
57.5
57.5
57.5
62.5
62.5
62.5
62.5
70.0
70.0
70.0
75.0
75.0
75.0
75.0
73.0
73.0
73.0
73.0
73.0

l1'
89
89
89
89
89
95
95
95
95
95
104
104
106
112
112
112
112
126
126
126
126
126
126
126
136
136
136
136
136

l2
20
20
20
20
20
23
23
23
23
23
25
25
25
25
25
25
25
28
28
28
28
28
28
28
32
32
32
32
32

l 4'
44.5
44.5
44.5
44.5
44.5
47.5
47.5
47.5
47.5
47.5
52.0
52.0
53.0
56.0
56.0
56.0
56.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
68.0
68.0
68.0
68.0
68.0

l5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
2.0
2.0
2.0
2.0
2.0

l6

5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
10
10
10
10
10

l7
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

mx

CGS-Tandem
M6
EagleBurgmann
5

5
5
5
5
5
5
5
5
5
5
5
5
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7

M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8

* EN12756

95

Mechanical seals Mechanical seals for pumps Gas-lubricated seals

GSO-DN
l1
l2

l3
l4

14
15
11
12

24

Barrier pressure: p3 = max. 25bar (362PSI)

Differential pressure: p= min. 3bar (44PSI)
Temperature: t = 20C+170C (4F+338F)
(dependent on resistance of O-Rings)

Sliding velocity: vg = 16m/s (52ft/s),

with special design max. 25m/s (82ft/s)
Axial movement: 0.2mm
Materials
Seal faces: Carbon graphite (A)
Seat: Silicon carbide (Q1, Q2)
Secondary seals: FKM (V), EPDM (E), FFKM (K)
Springs: Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), Hastelloy C-4 (M)
Dimensions in mm
GSO-DN/30-00-R
GSO-DN/33-00-R
GSO-DN/35-00-R
GSO-DN/43-00-R
GSO-DN/48-00-R
GSO-DN/50-00-R
GSO-DN/53-00-R
GSO-DN/60-00-R
GSO-DN/65-00-R
Other sizes on request.

96

d1
30
33
35
43
48
50
53
60
65

d2
46
49
51
63
69
70
73
85
90

d 3min. d 3max. l1
49
59
85
53
65
85.5
52
65
85.5
64
78
90.5
69
80
90.5
72
82
90.5
73
87
92.8
87
102
97.5
91
107
100.5

l2
55
55.5
55.5
57.5
57.5
57.5
57.8
60.5
59.5

l3
30
30
30
33
33
33
35
37
41

l4
39
39.5
39.5
41.5
41.5
41.5
41.8
44.5
43.5

da
104
122
124
138
145
147
148
157
178

a2
69.7
72.7
74.7
84.7
89.7
91.7
94.7
104
109

s
14
14
14
16
16
16
18
18
18

20

(dependent on shaft diameter and sliding materials)

a2

Product pressure: p1 = max. 22bar (319PSI),

Item Description
1, 2
Seal face
3, 4, 8, 10, 13 O-Ring
5, 6
Spring
7 Seat
9
Shaft sleeve
11 Flange
12 Gasket
14 Cover
15, 22, 25
Countersunk screw
16
Retaining ring
17 Pin
18 Ring
19
Set ring
20
Set screw
21
Pumping ring
23 V-Seal
24
Assembly fixture

5 18 7

45

(other dimensions on request)

19

45

13

Features
Seat rotating
Stationary springs
Double seal
Balanced
Standard version with V-grooves, U-grooves optional
(independent of direction of rotation)
Gas-lubricated

Advantages
Contact free operation
Face-to-face
Cartridge unit
Does not open in the event of buffer pressure failure
Self closing at pressure reversal
No additional complex components to dissipate
frictional heat

Operating range (see note on page 1)
Shaft diameter: d1 = 3075 mm (1.125"2,625")

3 1 16 17 10 2

h6

23

d1

min

d3

d2

max

d3

21 22

25

da

Seal cover
Recommended applications
GSO D EagleBurgmann
Chemical industry
Refining technology
Gases and liquids
Media which require high purity
Environmental harmful media
Blowers
Fans
Pumps

Mechanical seals Mechanical seals for pumps Gas-lubricated seals

HRGS-D
HRGS-DC

1.2 1.1.1
3

Features
Double seal
Balanced
Standard version with U-grooves (bi-directional)
Gas-lubricated

Advantages
Contact-free operation
Suitable for solids containing media
Internally pressurized
Cartridge unit
Does not open in the event of buffer pressure failure,
self closing at pressure reversal
HR principle with rotating seat
No friction on the seal faces, no heat generated at the
seal or in the medium

Operating range (see note on page 1)
Shaft diameter: dw = 20200 mm (0.787"7.874")
Pressure HRGS-DC: p1 =22bar (319 PSI),
p3 =25bar (362 PSI)
Pressure HRGS-DD: p1 =40bar (580 PSI)
p3 =43bar (624 PSI)
Operating temperature limits for:
EPDM 20C+140C (4F+284F)
FFKM 20C+120C (4F+248F)
FKM 20C+170C (4F+338F)
Sliding velocity: vg = 425 m/s (1382 ft/s)
Differential pressure p = min. 3bar (44 PSI),
max. 16bar (232 PSI) (internal pressure)
Materials
Product side (HRGS-DC, HRGS-DD):
Seal face: Silicon carbide (Q19, Q29)
Seat: Silicon carbide (Q1, Q2)

4
1.1.4

2.1.5
2.1.4

2.1.1

2.2

13

10

HRGSD EagleBurgmann

Recommended applications
Chemical industry
Refining technology
Gases and liquids
Media which require high purity
Environmental harmful media
Pumps
Product variants
HRGS-DC
Gas-buffered double seal. The HRGS-DC is designed
for applications involving fitting dimensions in line with
DIN24960 C or ANSI Big Bore standard, but can also
be used even when the fitting dimensions are not of
standardized nature if large, open spaces are available
for installation. The CGSH is used as outboard seal up to
nominal width 125.

Item Part no. to DIN 24250

1.1.1 472.1
1.1.4 477
1.2 475.1
2.1.1 472.2
2.1.4 485
2.1.5 477
2.2 475.2
3
523
4 513
10 441
13

Description
Seal face
Spring
Seat
Seal face
Drive collar
Spring
Seat
Shaft sleeve
Insert
Housing
Assembly fixture

Dimensions
Dimensions on request

HRGS-DD
Acc. to API 682 configuration 3NC-FB, Plan 74. The
HRGS-DD corresponds to the HRGS-DC in terms of design
principal and materials. It is designed for applications
involving large shaft diameters of up to 200 mm (7.87")
or fairly high pressure levels of up to 40 bar (580 PSI).
The outboard seal used in such cases is the DGS.

Atmosphere side HRGS-DC:

Seal face: Carbon graphite antimony impregnated (A),
Carbon graphite resin impregnated (B)
Seat: Silicon carbide (Q1, Q2)

HRGS-DD

Atmosphere side HRGS-DD:

Seal face: Silicon carbide (Q19, Q29)
Seat: Silicon carbide (Q1, Q2)
Springs: CrNiMo steel (G), Hastelloy C-4 (M)
Metal parts: CrNiMo steel (G), Hastelloy C-4 (M)

HRGSDD EagleBurgmann

97

Mechanical seals Mechanical seals for pumps Gas-lubricated seals

NF992
l1
l3

l2

21 24

7 5 6 19 3 4 14 12 8 9 10 11 31

Dimensions in mm
d
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100

98

d1
62
67
72
77
82
90
95
100
105
110
118
123
128
133
138
145

d2min
76
81
86
91
96
107
112
117
122
127
132
137
142
147
152
157

d3
118
118
128
138
138
164
164
178
193
193
208
208
218
218
228
228

l1
49
49
52
52
52
54
54
54
54
54
56
56
56
56
56
56

l2
31.5
31.5
32.5
32.5
32.5
34.5
34.5
34.5
34.5
34.5
34.5
34.5
34.5
34.5
34.5
34.5

l3
38
38
41
41
41
43
43
43
43
43
43
43
43
43
43
43

l4
76
81
86
91
96
107
112
117
122
127
132
137
142
147
152
157

l5
12
12
14
14
14
18
18
18
18
18
20
20
20
20
20
20

d3

d1

h7

16

15 1 17 2 22 23 25 13 26 30

29

27
28

Item Description
1,8
Seal face
NF992 EagleBurgmann
2, 7, 9, 14, 16, 17, 24, 25 O-Ring
3, 10
Thrust ring
4, 11
Spring
5, 12
Seat
6, 13, 21, 27, 30
Pin
15
Shaft sleeve
18 Labyrinth
19 Adapterhlse
20, 26
Housing
22 Adapter
23
Retaining ring
28, 33
HSH Cap screw
Seal cover
29
Clamping sleeve
31
Set screw
32
Assembly fixture

l5

Recommended applications
Chemical industry
Refining technology
Hazardous media
Monomeres
Monomere pumps

20

l4

Materials
Seal face: Silicon carbide (Q1), High density carbon graphite
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V)
Metal parts: 1.4401 (G)

d2

min

18

Features
Cartridge
Balanced
Bi-directional
Gas-lubricated, gas-buffered

Operating range (see note on page 1)
Pressure: p = vacuum16bar (232 PSI)
Temperature: t = 20C+160C (66F+320F)
Sliding velocity: 20 m/s (66 ft/s)
Viscosity:300 mPas
Solids content:20 %

33
32

45

NF992 EagleBurgmann

99

Mechanical seals Agitator seals Dry running seals

SeccoMix
X
d3

l2

l3

11

3
1

26

6
5
d1

h8

d2

* With cooling flange

For applications beyond this range, please inquire

d4
d5

Item Description
1
Seal face with seal face housing
3
Drive collar
5 Flange
6 Seat
11 Clamping ring
Materials
Seal face: Carbon graphite, FDA conform
Seat: Silicon carbide
Secondary seals and metal parts according to application
and customer's specifications.

Recommended applications
Chemical industry
Pharmaceutical industry
Food and beverage industry
Non-toxic media with single seal
Toxic media with double seal
Agitators
Reactors

Standards and approvals

Material approvals: FDA
ATEX
DIN 28136 T2 (for steel vessels)
DIN 28137 T1 (flange connection for steel vessels)
DIN 28141 (flange for steel vessels)
DIN 28154 (shaft end for steel vessel)
DIN 28136 T3 (for glass-lined vessels)
DIN 28137 T2 (flange connection for glass-lined vessels)
DIN 28159 (shaft end for glass-lined vessels)
Notes
Stationary seat alternatives available on request.
Options
Cooling or heating flange
Flush
See page 107.

100

Recommended seal supply

Gas supply EagleBurgmann GSS4016/Afor double seals
SeccoMix 481D.. and SeccoMix 461D ..

Features
For top entry drives, on request side drive possible
Dry-running
Single and double seals
Balanced
Outboard
Multiple springs rotating
Independent of direction of rotation

Advantages
Available as components or as cartridge units
Suitable for pressure reversals
Due to the hydraulic conditions, product pressure as well
overlaying barrier pressure closes the seal
Friction-locked connection to the shaft
Connections for steel (SeccoMix 481) and glass-lined
(SeccoMix 461) reactors are available to DIN 28138
standards or as required
Available also for lateral drives, please inquire
ATEX certification available on request

Operating range (see note on page 1)
Shaft diameter: d1 = 25160 mm (0.98"6.30")
Pressure: p1 = vacuum6bar (87 PSI)
Temperature: t1 = 20C+150 (250*)C
(4F+302 (482*)F)
Sliding velocity: vg = 02 m/s (06 ft/s)
Axial movement: 1.5 mm
Radial movement: 1.5 mm

a1

Seal flange

SeccoMix EagleBurgmann

Product variants
SeccoMix1-11
The SeccoMix1-11 is equipped in addition with a sleeve
for trapping any abraded particles from the seal face.
Contamination of the medium in the container is thus ruled
out. The sleeve can be cleaned through a flushing bore.
Please note: diameters (d2 to d5) increase to the next
possible design size.

SeccoMix 481
Single seal. Dimensions see page 107

SeccoMix 481-D
Double seal

SeccoMix 481L
Single seal with integrated floating bearing.

SeccoMix 481L-D
Double seal with integrated floating bearing

SeccoMix 451
All types of the SeccoMix 481 range available for
unstepped shafts (all diameters). Seal identification:
SeccoMix 451Customized design or e.g. different drives
(torque transmissions) are available.

These seals are designed to be self-closing on the product

side, i.e. they will remain closed even with pressure
variations or a pressure reversal. Operation is optionally
the same as for the single version. In view of the
mechanical seal on the atmosphere side it can be used
as a buffer pressurized double seal . The barrier pressure
should be 0.51.0 bar (7.2515 PSI) above pressure
to be sealed.

SeccoMix 461/(491)
For glass-lined vessels. Dimensions see page 109

D
A

Dimensions in mm
d1(mm)
25
28
30
32
35
38
40
45

48
50
55

60
65

70

75
80
85
90
95
100
105
110
115
125
140

150
160

d1(inch) d2
1.000
34
SeccoMix111 Flush
1.125
34

34
1.250
39
1.375
39
1.500
44

44
1.625
49
1.750
49
1.875
54

54
2.000
59
2.125
59
2.250
64
2.375
69
2.500
69
2.625
74
2.750
74
2.875
79
3.000
84
3.250
89
3.500
94
3.750
99

104
4.000
109
4.250
114
4.500
119
4.750
129
5.000
144
5.250
144
5.500
144
5.750
154
6.000
164
6.250
164

d3
d4
68

EagleBurgmann
68
55
68
55
73
60
73
60
78
65
78
65
83
68
83
68
88
73
88
73
93
78
93
78
98
85
103
90
103
90
108
95
108
95
113
100
118
105
123
110
128
115
133
120
138
125
143
130
148
135
153
140
163
150
178
165
178
165
178
165
188
175
198
185
198
185

d5
148
148
148
153
153
158
158
163
163
178
178
183
183
188
193
193
198
198
203
208
213
218
223
228
233
238
267
277
297
297
297
307
317
317

l2
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5
44.5

l3
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38

SeccoMix 481 EagleBurgmann

SeccoMix 481L EagleBurgmann

a1(min.)
100
100
100
105
105
110
110
115
115
125
125
130
130
135
140
140
145
145
150
155
160
165
170
175
180
185
196
206
221
221
221
231
241
241

a1(max.)
132
132
132
137
137
142
142
152
152
160
160
165
165
170
175
175
180
180
185
190
195
200
205
210
215
220
243
253
273
273
273
283
293
293

s
11
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
18
18
18
18
18
18
18
18

SeccoMix 481-D EagleBurgmann

SeccoMix 481L-D EagleBurgmann

101

Mechanical seals Agitator seals Dry running seals

AD510/AD520
l3

l
l1

l2

0,3

AM

5 0,05

Features
Dry running
Single seal
Independent of direction of rotation

Advantages
AD510 includes housing
Options: Cooling jacket on the flange side of the boiler
with carbon throttle and version with gas flushing and lip
seal.

Operating range (see note on page 1)
Vessel pressure: p = vacuum (7 mbara)5bar (73 PSI)
Vessel temperature: t = 30C+175C
(22F+347F)
Sliding velocity: vg = max. 1.0 m/s (3 ft/s)
Allowable gas consumption: 2 Nl/h
Dimensions in mm
d

20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
120
130
140
150
160
170
180

102

d1
36
41
46
51
60
65
70
75
85
90
95
104
109
114
119
124
129
134
139
150
160
175
190
200
210
220

d2
42
47
52
57
66
71
76
81
91
96
101
110
115
120
125
130
135
140
145
160
170
185
200
210
220
230

d3
50
55
60
65
75
80
85
90
100
105
110
120
125
130
135
140
145
150
155
170
180
195
210
220
230
240

d4
70
75
80
85
95
100
105
110
120
125
130
140
150
155
160
165
170
175
180
200
210
225
240
250
260
270

d5
90
95
100
105
120
125
130
135
145
150
155
165
178
183
188
193
198
203
208
236
246
260
276
286
296
306

d6
46
51
56
61
70
75
80
85
92
97
102
109
114
120
124
130
134
140
146
160
170
180
200
210
220
230

d7
60
65
70
75
85
90
95
100
110
115
120
130
130
140
140
150
150
160
165
180
190
200
225
230
250
250

l
77
77
77
77
82
82
82
82
89
89
91
91
98
98
98
98
98
98
98
110
110
110
136
136
136
136

l1
44
44
44
44
47
47
47
47
51
51
51
51
57
57
57
57
57
57
57
63
63
63
85
85
85
85

AD520
l 6 0,05
( l1 1 )

Item Description
1, 4 O-Ring
2 Seat
3
Seal face

AD510-AD520

Materials
Gleitring: PTFE kohlefaser- und glasfaserverstrkt
Gegenring: Siliziumkarbid (Q), Aluminiumoxid (V)

l2
24
24
24
24
26
26
26
26
28
28
30
30
31
31
31
31
31
31
31
37
37
37
40
40
40
40

l3
11
11
11
11
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
20
20
20
20
20
20
20

l4
63
63
63
63
68
68
68
68
74
74
76
76
83
83
83
83
83
83
83
95
95
95
120
120
120
120

l5
20
20
20
20
22
22
22
22
24
24
26
26
27
27
27
27
27
27
27
33
33
33
36
36
36
36

l6
16
16
16
16
18
18
18
18
20
20
21
21
22
22
22
22
22
22
22
27
27
27
30
30
30
30

l7
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3

A-M
4-M8
4-M8
4-M8
4-M8
4-M10
4-M10
8-M10
8-M10
8-M10
8-M10
8-M10
8-M10
8-M12
8-M12
8-M12
8-M12
8-M12
8-M12
8-M12
8-M16
8-M16
8-M16
8-M16
8-M16
8-M16
8-M16

l7

l5

0,3

Recommended applications
Chemical industry
Pharmaceutical industry
EagleBurgmann
Food and beverage industry
Reactors
Polymerization agitators
Mixers
Product variant
AD520

d5

0,5

d4

d 3 H7
f7

l4

d2

h7

H7

H11

d6

d7

d1

AD510

103

Mechanical seals Agitator seals Gas-lubricated seals

AGSZ
d7

1)

h6

AGSZ481...

l3

l2

22

L1

1
A

* Up to 5 m/s (16 ft/s) on request.

Materials
Seal face and seat: Silicon carbide
Standards and approvals
ATEX
Material approvals: FDA
DIN 28136 T2 (for steel vessels)
DIN 28137 T1 (flange connection for steel vessels)
DIN 28141 (flange for steel vessels)
DIN 28154 (shaft end for steel vessel)
DIN 28136 T3 (for glass-lined vessels)
DIN 28137 T2 (flange connection for glass-lined vessels)
DIN 28159 (shaft end for glass-lined vessels)

104

L2

11

2 x M2

d2

8,5

l1

17

1,5

Features
For top entry drives
Gas-lubricated
Double seal
Balanced
Independent of direction of rotation

Advantages
Centrally arranged rotating seat
Torque transmission by clamping ring for large axial
movements
No friction on the seal faces, no heat generated at the
seal or in the medium
Contact-free running
Ready-to-fit and factory-tested unit

Operating range (see note on page 1)
Shaft diameter: d3 = 40220 mm (1.6"8.7")
Pressure p1 = vacuum6bar (87 PSI),
p min. = 3bar (44 PSI), p3 = 9bar (131 PSI)
Temperature: t1 = 0C+150C (+32F+302F),
with cooling flange +250C (+482F)
Sliding velocity: vg = 02 m/s (07 ft/s)*

1)
h8

d3

d0

30

a
d4 e8
k
d1

Item Description
1
Seal face (Q19), atmosphere side
2
Seal face (Q19), product side
6, 7 O-Ring
11 Seat (Q1)
17 Flange
22 Clamping ring

AGSZ EagleBurgmann

Options
Cooling or heating flange
Flush

Recommended applications
Chemical industry
Food and beverage industry
Pharmaceutical industry
Gases and liquids
Media which require high purity
Environmental harmful media with double seals
Agitators

F, G

See page 107.

Recommended seal supply

Connection to the gas network (or cylinder) with an
upstream gas supply and control system EagleBurgmann
GSS4016/A250-D1 resp. GSS4016/A350-D1 with alarm
FIAH, FIAL and PIAL, together with two flow meters for
alarge measuring range.
Note: To assure a sufficient supply of the mechanical seal,
pressure at entry of the supply system must be min. 2 bar
(29 PSI) above max. barrier pressure always.

A
C

M1

S
M2
E, G

Supply connections
AGSZ EagleBurgmann
Designation and positions of supply connections,
pull-off and jacket threads acc. to DIN 28138 T3.
A Barrier gas IN
C Leakage
E Cooling IN
F Cooling OUT
S Flush
G Grease

Product variants
AGSZ481K(L)-D
Double seal (with integrated bearing) for steel vessels to
DIN 28136, connection flange to DIN 28141 and shaft
ends to DIN 28154.

AGSZ461K(L)-D
Double seal (with integrated bearing) for glass-lined
vessels to DIN 28136, connection flange to DIN 28137
and shaft ends to DIN 28159.

AGSZ451K(L)-D
Version with special connection dimensions or unstepped
shafts. For steel vessels.
AGSZ491K(L)-D
Variant with special connection dimensions for glass-lined
vessels.

d2

15 0,1

7 l1

2 x M2

G
C

d8
d4

H8
f8

k1

d1

AGSZ461K(L)-D
Flanschanschluss
nach DIN 28137 T2
fr Nenngrsse
40 bis 100.

AGSZ EagleBurgmann

AGSZ461K(L)-D
AGSZ461 EagleBurgmann

T-Shrink disk II EagleBurgmann

Shrink disk

Clamping ring with pin

AGSZ481 Dimensions in mm

d31)
d71)
d1
n x d2
40
38
175
4 x 18
50
48
240
8 x 18
60
58
240
8 x 18
80
78
275
8 x 22
100
98
305
8 x 22
125
120
330
8 x 22
140
135
395
12 x 22
160
150
395
12 x 22
180
170
445
12 x 22
200
190
445
12 x 22
220
210
505
16 x 22
1) Shaft diameters d and d to DIN 28154
3
7

Drehmomentbertragung

Drehmomentbertragung

Torque transmissions

d4
110
176
176
204
234
260
313
313
364
364
422

d0
90
135
135
155
190
215
250
265
310
310
340

k
145
210
210
240
270
295
350
350
400
400
460

L1
81
82.5
78.5
94.5
95
95
97
97

Klemmring EagleBurgmann

Flange connection acc. to DIN28137 T2

for nominal diameters 125161.

Klemmring mit Stift EagleBurgmann

Flange connection acc. to DIN 28137 T2 fr

for nominal diameters 40100.

Clamping ring

L2
137
130.5
128
146
156.5
163.5
168.5
176.5

Lw1)
143
148
158
168
178
203
208
213
233
243
263

l1
15
17
18
20
20
20
20
25
25
25
25

l2
35
42
39
50
56.5
60
82
81

l3
28
28
28
34
34
39
41
41

a
122
155
176
203
228
268
285
302
332
352

M1
M12
M12
M12
M16
M16
M20
M20
M20
M24
M24
M24

M2
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20

A
G3/8
G3/8
G3/8
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2

AGSZ481 Dimensions in mm

Nenn- Flanschd31)
d71)
n x d2
gre gre2) d1
40
38
40
E125
175
4 x 18
50
48
50
E200
240
8 x 18
60
58
60
E250
275
8 x 22
80
78
80
E300
305
8 x 22
100
98
100
E400
395
12 x 22
100
98
100
E500
395
12 x 22
125
120
125
E700
505
4 x 22
140
135
140
E700
505
4 x 22
160
150
160
E900
505
4 x 22
160
150
161
E901
565
4 x 26
1) Shaft diameters d and d to DIN 28159
3
7
2) Flange size to DIN 28137T2

d4
110
176
204
234
313
313
422
422
422
474

n x d5

12 x 22
12 x 22
12 x 22
12 x 22

d6

320
320
320
370

d7
102
138
188
212
268
268
306
306
306
356

k1
145
210
240
270
350
350
460
460
460
515

k2

350
350
350
400

L1
142
147
158
170
177
177
208
223
228
228

L2
184
195
203
240
240
240
266
282
282
282

l1
25
25
25
30
30
30
30
30
30
30

l2
35
40
42
45
52
52
75
79
77
77

I3
28
28
28
34
34
34
40
40
40
40

l4
50
50
50
60
60
60
60
60
60
60

l5
50
50
60
60
60
60
80
80
85
85

M1
M12
M12
M12
M16
M16
M16
M20
M20
M20
M20

M2
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20

A.B
G3/8
G3/8
G3/8
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2

105

Mechanical seals Agitator seals Gas-lubricated seals

AGSR

C
16
9

Features
AGSZ481K(L)-D
For top, bottom and side entry drives
Gas-lubricated
Double seal
Balanced
Stationary springs on product side
Independent of direction of rotation

Advantages
Torque transmission by clamping ring for large axial
movements
No friction on the seal faces, no heat generated at the
seal or in the medium
Variant for sterile applications available
Ready-to-fit and factory-tested unit

Operating range (see note on page 1)
Shaft diameter: d3 = 20200 mm (0.8"7.9")
Pressure: p1 =6bar (87 PSI), p min. = 3bar (44PSI),
p3 max. = 9bar (131 PSI)
Temperature: t1 = 0C+150C (+32F+302F)
Sliding velocity: vg = 02 m/s (07 ft/s)*

15
10

1
7

Item Description
1, 15
Seal face
6
Sealing ring
7, 9
Seat
8, 10, 16
O-Ring
Materials
Seal face and seat: Silicon carbide
Option
Flush

Recommended applications
Chemical industry
Food and beverage industry
Pharmaceutical industry
AGSR58 EagleBurgmann
Pasty media
Dry media
Mixers
Dryers
Special rotating equipment
Dimensions
Dimensions on request
Recommended seal supply
Connection to the gas network (or cylinder) with an
upstream gas supply and control system EagleBurgmann
GSS4016/A250-D1 resp. GSS4016/A350-D1 with alarm
FIAH, FIAL and PIAL, together with two flow meters for
a large measuring range. Required minimum pressure
difference: 3 bar (44 PSI).

* Higher velocities on request.

Standards and approvals

Material approvals: FDA

Flushing the AGSR. Especially when the seal is operated

in lateral or bottom drives, an optional flush on the
product side enhancesSpuelung
operational
safety.
AGSR EagleBurgmann

Note: To assure a sufficient supply of the mechanical seal,

pressure at entry of the supply system must be min. 2 bar
(29 PSI) above max. barrier pressure always.
G
A
C

M1

S
M2
G

Supply connections
AGSR EagleBurgmann
A
C
G
S

106

Barrier gas IN
Leakage
Grease
Flush

Product variants
AGSR5(L)-D
Double seal (with floating bearing for the shaft). If the seal
has to run in the product, please inquire.

AGSR3(L)-D
Double seal (with floating bearing for the shaft) for sterile
applications. The dead-space-free design with polished
surfaces on the product side meets the requirements for
sterile processes.

C
B

T-Shrink disk II EagleBurgmann

Shrink disk

Clamping ring with pin

Drehmomentbertragung

AGSR38 EagleBurgmann

Klemmring EagleBurgmann

Drehmomentbertragung

Torque transmissions

Klemmring mit Stift EagleBurgmann

Clamping ring

107

Mechanical seals Agitator seals Liquid-lubricated seals

ERB
d6
d5

d = 50100 mm

l2
l3

l2

l1

7
8

l1

5
6

l3

4
3
2
1

l4

ERC

ERB

d1

h6
d 2 H7
f7

d3

mxd 7

Features
Cartridge
Double seal with integrated bearing
Unbalanced
Independent of direction of rotation

Advantages
Ready-to-fit and factory-tested units
Available with or without bearing
Suitable for standardizations
Balanced seal can be applied at high pressure

Operating range (see note on page 1)
Pressure: p = vacuum10bar (145PSI)
Temperature: t = 30C+200C (22F+392F)
Rotational speed: n = max. 200min-1
Axial movement: max. 0.3 mm

0,5

d4
d6
ERB ERC 50100 EagleBurgmann
d5

Materials
Shaft diameter 50100 mm:
Seal faces: Carbon graphite resin impregnated (B)
Seat: Silicon carbide (Q1), Tungsten carbide (U1),
Chromium oxide coated

d = 110200 mm

Diameter 110200 mm:

Seal faces: Silicon carbide (Q1), Tungsten carbide (U1),
Chromium oxide coated
Seats: Carbon graphite resin impregnated (B),
Silicon carbide (Q1), Tungsten carbide (U1)
9

Recommended applications
Chemical industry
Food and beverage industry
Reactors
Polymerization agitators
Mixers

l3

3
2
1

l1
l2
l4

ERC

nxd 7

ERB

d1

h6

d2

H7
f7

d3

0,5

d4

108

l3

l1
l2

Optionen
Cooling jacket on the vessel side flange. Please inquire.

7
8

Item Description
1, 4, 5, 8
O-Ring
2, 6
Seat
3, 7
Seal face
9
Shaft seal

5
6

ERBERC 110200 EagleBurgmann

Product variants
ERA
Double seal integrated shaft and bearing.

ERD
Single seal integrated shaft and bearing.

ERC
Double seal without bearing.

ERE
Single seal integrated bearing.

ERG
Double seal with integrated bearing.
For glasslined vessels.

Set screw with cone

point for diameter
d1 >120 mm and/
or vessel pressure
p >1barg

Drive key

ERB Dimensions in mm

d
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200

d1
35
45
55
65
75
85
95
105
110
120
130
140
150
160
170
180

d2
135
145
155
165
175
185
205
215
225
235
280
290
300
310
320
330

d3
170
180
190
200
210
220
240
261
271
281
335
345
355
365
375
390

d4
195
205
215
225
235
245
265
289
299
309
375
385
395
405
415
430

ERC Dimensions in mm

d
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200

d1
35
45
55
65
75
85
95
105
110
120
130
140
150
160
170
180

d2
135
145
155
165
175
185
205
215
225
235
280
290
300
310
320
330

d3
170
180
190
200
210
220
240
261
271
281
335
345
355
365
375
390

Drive key EagleBurgmann

Torque transmission

Set screw with cone point EagleBurgmann

Torque transmissions

d4
195
205
215
225
235
245
265
289
299
309
375
385
395
405
415
430

T-ShrinkShrink
disk II disk
EagleBurgmann

d5
61
75
85
95
105
115
125
135
145
159
169
179
189
199
209
219

d6
134
144
154
164
174
184
218
235
245
255
295
305
315
328
338
358

d7
14
14
14
14
14
14
14
19
19
19
23
23
23
23
23
23

l1
268
283
293
303
323
323
333
371
364
369
424
433
452
458
473
483

l2
237
252
262
272
287
287
291
309
322
322
377
386
400
406
416
426

l3
185
197
205
207
219
219
216
233
238
238
288
291
295
299
309
312

l4
30
30
30
30
30
30
30
35
35
35
45
45
45
45
45
45

d5
66
76
86
96
110
120
130
140
154
164
174
184
194
204
214
224

d6
134
144
154
164
174
184
218
235
245
255
295
305
315
328
338
358

d7
14
14
14
14
14
14
14
19
19
19
23
23
23
23
23
23

l1
162
175
186
186
198
198
200
217
222
222
261
263
263
263
273
277

l2
144
157
168
168
178
178
173
190
190
190
229
231
231
231
241
245

l3
30
30
30
30
30
30
30
35
35
35
45
45
45
45
45
45

n
8
8
8
8
8
8
8
12
12
12
12
12
12
12
12
12

n
8
8
8
8
8
8
8
12
12
12
12
12
12
12
12
12

Lagertyp
#7210ADB
#7212ADB
#7014ADB
#7016ADB
#7018ADB
#7020ADB
#7022ADB
#7024ADB
#7026ADB
#7028ADB
#7030ADB
#7032ADB
#7034ADB
#7036ADB
#7038ADB
#7040ADB

109

Mechanical seals Agitator seals Liquid-lubricated seals

M481
a

l2

lw

L1

Sliding velocity: vg = 05 m/s (016 ft/s)

For applications beyond this range, please inquire.

* Higher or lower temperatures on request.

Standards and approvals

Material approvals: FDA
Materials
According to application and customers specification

110

h8

d2

30

8,5

l1

2
14
11
15

1,5

Double seals:
Pressure: p1 = vacuum16bar (232 PSI),
p3 = max. 18bar (261 PSI)
Temperature: t1* = 40C+200 (350)C
(40F+392 (662)F)

d3

L2

C
1)

Single seals:
Pressure: p1 = vacuum6bar (87 PSI),
p3 = pressureless
Temperature: t1* = 40C+150 (250)C
(40F+302 (482)F)

M481K(L)

2 x M2

Operating range (see note on page 1)

DIN 28138 T2
Shaft diameter: d3 = 40220 mm (1.57" .... 8.66")

h6

2 x M1

34

Features
For top entry drives, type M481 to DIN
Single or double seals
Unbalanced
Independent of direction of rotation
Multiple springs rotating
Liquid-lubricated
Cartridge unit

Advantages
Ready-to-fit and factory-tested units
Available with or without floating bearing
Suitable for standardizations
FDA certification
Double seals can be applied at higher pressure and
rotating speed than specified by DIN
Due to the hydraulic conditions, product pressure as well
overlaying barrier pressure closes the seal.

1)
l2

d7

d0
d4

e8

k
d1
M481 EagleBurgmann
Item Description
1
Seal face, atmosphere side
2
Seal face, product side
6, 7, 13, 14, 15 O-Ring
11
Seat, product side
12
Seat, atmosphere side
34
Shaft seal

Standards and approvals

Material approvals: FDA
DIN 28136 T2 (for steel vessels)
DIN 28137 T1 (flange connection for steel vessels)
DIN 28141 (flange for steel vessels)
DIN 28154 (shaft end for steel vessels)
Recommended seal supply
Closed circuit EagleBurgmann TS system
Open circuit EagleBurgmann SPA, EagleBurgmann SPN
Recommended applications
Refining technology
Petrochemical industry
Chemical industry
Pharmaceutical industry
Food and beverage industry
Non-toxic media with single seal
Toxic media with double seal
Agitators
Reactors

F, G
A
C
S

M1
M2

B
D

E, G, T

Designation and position acc. to DIN 28138 T3.

M 481 EagleBurgmann
A
Barrier fluid resp. quench IN
B
Barrier fluid resp. quench OUT
C Drainage
D
Leakage drain G1/8"
E
Cooling IN G3/8"
F
Cooling OUT G3/8"
G Grease
S Flush
T
Temperature metering
For reasons of standardization, the supply connections of
single seals are matched to those of the double seals (in
deviation from DIN 28138T3).

Product variants
M481K
Single seal
M481KL
Single seal with integrated floating bearing.
Operation of single seals only with pressureless quench.
M481K-D
Double seal

M481KL-D
Double seal with integrated floating bearing.

13
12
1
6

These seals are designed to be self-closing on the product

side, i.e. they will remain closed even with pressure
variations or a pressure reversal. Operation is optionally
the same as for the single version (pmax. = 6bar (87 PSI)
or pmax. = 6bar (87 PSI) at p1 > p3). In view of the
mechanical seal on the atmosphere side it can be used as
a buffer pressurized double seal p1 = 16bar (232 PSI).

C
B

2
14
11
15

M451
All types of the M481 range available for unstepped shafts
(all diameters). Seal identification: M451Customized
design or e.g. different drives (torque transmissions) are
available.

M481K(L)-D

Clamping set

Shrink disk

Clamping ring with pin

Drehmomentbertragung

Klemmring EagleBurgmann

Drehmomentbertragung
T-Shrink disk II EagleBurgmann

Klemmring mit Stift EagleBurgmann

Torque transmission

Clampingset EagleBurgmann

M481KL D EagleBurgmann

Torque transmissions

Clamping ring

E
F

l5

ls

Options

Dimensions
in mm EagleBurgmann
CoolingKhlflansch
or heating flange
EagleBurgmann
d31)
40
50
60
80
100
125
140
160
180
200
220
1)
2)

d71)
38
48
58
78
98
120
135
150
170
190
210

d1
175
240
240
275
305
330
395
395
445
445
505

n x d2
4 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 22
12 x 22
12 x 22
12 x 22
12 x 22
16 x 22

d4
110
176
176
204
234
260
313
313
364
364
422

E
F

Khlflansch
Cooling
flanget max = 350 C
als Heizflansch)
Can(alternativ
be usedanwendbar
alternatively
as a heating
flange (tmax. = 250C (482F)).

Leakage
drain
Leckabzug
with
leakageanwendbar
drain als Splung)
(alternativ
Can be
(canused
also bealternatively
used as a flush) as a flush or as
a heating flange.

Leckabzug und Kuehlflansch

Leakage drain
Can be used alternatively as a flush.

Leckabzug und Kuehlflansch EagleBurgmann

d0
90
135
135
155
190
215
250
265
310
310
340

k
145
210
210
240
270
295
350
350
400
400
460

Leakage
Leckabzug
drain or
flushEagleBurgmann
EagleBurgmann

L1
87
89
93.5
104.5
109
110
124
127.5
132.5
137.5
149.5

L2
136
149
156
189
190
205
222
219.5
230
237.5
249.5

Lw2)
143
148
158
168
178
203
208
213
233
243
263

I1
15
17
17
20
20
20
20
25
25
25
25

I2
28
28
28
34
34
40
40
40
45
45
50

a
122
157
168
203
228
268
285
297
332
352
381

M1
M12
M12
M12
M16
M16
M20
M20
M20
M24
M24
M24

M2
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20

Polymerization barrier
Can be used alternatively as a leakage
drain or a flush.
Polymerisationssperre EagleBurgmann

A. B
G3/8
G3/8
G3/8
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2

Shaft diameters d3 and d7 to DIN 28154

Shaft step to DIN 28154

111

Mechanical seals Agitator seals Liquid-lubricated seals

d7

l3

M461
h6

Operating range (see note on page 1)

Shaft diameter: d3 = 40160 mm (1.57"6.30")
Pressure: p1 = vacuum16bar (232 PSI),
p3 = max. 18bar (261 PSI)
Temperature: t1 = 40C+200 (250)C
(40F+392 (482)F)
Sliding velocity: vg = 05 m/s (016 ft/s)
For applications beyond this range, please inquire.

Materials
According to application and customers specification

l5

2 x M2

d2

h8

0,1

14
11
15 d
3

l4

15

Features
For top entry drives
For glass-lined vessels, acc. to DIN 28138 T2
Double seal, single seal on request
Unbalanced
Independent of direction of rotation
Multiple springs rotating
Cartridge unit

Advantages
Ready-to-fit and factory-tested units
Available with or without floating bearing
Suitable for standardizations
FDA certification
Double seals can be applied at higher pressure and
rotating speed than specified by DIN
Due to the hydraulic conditions, product pressure as well
overlaying barrier pressure closes the seal
The seal can be lifted off the glass-lined flange ring as a
complete cartridge. The sensitive glass lined flange
remains mounted on the vessel.

7 l1

L1

13
12
1
6

d8
d4

H8
f8

k1
d1

Item Description
M461KL D EagleBurgmann
1
Seal face, atmosphere side
2
Seal face, product side
6, 7, 13, 14, 15 O-Ring
11
Seat, product side
12
Seat, atmosphere side
Standards and approvals
Material approvals: FDA
DIN 28136 T3 (for glass-lined vessels)
DIN 28137 T2 (flange connection for glass-lined vessels)
DIN 28159 (shaft end for glass-lined vessels)
Recommended seal supply
Closed circuit EagleBurgmann TS system
Open circuit EagleBurgmann SPA, EagleBurgmann SPN
Options
Cooling or heating flange
Leakage drain or flush
See page 107

F, G
A
C

M1
M2

B
D

E, G, T

Supply connections
M 461 EagleBurgmann
Designation and positions of screwed connections, pull-off
and jacket threads acc. to DIN 28138 T3.
A Barrier fluid resp. quench IN
B Barrier fluid resp. quench OUT
C Drainage
D Leakage drain G1/8"
E Cooling IN G3/8"
F Cooling OUT G3/8"
G Grease
T Temperature metering
Recommended applications
Petrochemical industry
Chemical industry
Pharmaceutical industry
Food and beverage industry
Non-toxic media with single seal
Toxic media with double seal
Agitators
Reactors

112

L2

l2

2 x M1

Product variants
M461K-D
Double seal

d2

d5
2 x M2

1,5

l1

M461KL-D
Double seal with integrated floating bearing

20 0,1

M56K(L)-D
Double seal with/without floating bearing for PN25

30

d8
d6
k2
d4
k1
d1
M461 EagleBurgmann

Clamping set
Dimensions in mm
d31)

d71)

40
50
60
80
100
100
125
140
160
160
160

38
48
58
78
98
98
120
135
150
150
150

1)
2)

Nominal
size
40
50
60
80
100
100
125
140
160
160
161

Shrink disk

Flange
size2)
E125
E200
E250
E300
E400
E500
E700
E700
E700
E900
E901

Drehmomentbertragung

Clamping ring with pin

Klemmring EagleBurgmann

Drehmomentbertragung
T-Shrink disk II EagleBurgmann

Klemmring mit Stift EagleBurgmann

Torque transmission

Torque transmissions

Clampingset EagleBurgmann

Flange connections acc. to DIN 28137 T2

for nominal diameters 125161.

Clamping ring

d1

n x d2

d4

n x d5

d6

d8

k1

k2

L1

L2

l1

l2

I3

l4

l5

M1

M2

A,B

175
240
275
305
395
395
505
505
505
505
565

4 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
4 x 22
4 x 22
4 x 22
4 x 22
4 x 26

110
176
204
234
313
313
422
422
422
422
474

12 x 22
12 x 22
12 x 22
12 x 22
12 x 22

320
320
320
320
370

102
138
188
212
268
268
306
306
306
306
356

145
210
240
270
350
350
460
460
460
460
515

350
350
350
350
400

107
107
116
125
125
125
133
144
151
151
151

156
167
175
206
143
143
226
242
242
242
242

25
25
25
30
30
30
30
30
30
30
30

35
40
42
45
52
52
75
79
77
77
77

28
28
28
34
34
34
40
40
40
40
40

50
50
50
60
60
60
60
60
60
60
60

50
50
60
60
60
60
80
80
85
85
85

M12
M12
M12
M16
M16
M16
M20
M20
M20
M20
M20

M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20

G3/8
G3/8
G3/8
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2
G1/2

Shaft diameters d3 and d7 to DIN 28159

Flange size to DIN 28137T2

113

Mechanical seals Agitator seals Liquid-lubricated seals

MR-D
l7
nxd5

Operating range (see note on page 1)

Shaft diameter: dN/dw = 30200 (500) mm
(1.18"7.87" (19.68))
Axial offset shaft/housing:
dN/dw 3060 mm (1.18"2.36"):
max. 1.5 mm (0.059")
dN/dw >60 mm (2.36"): max. 2.0 mm (0.079")
Radial offset shaft/housing: max. 0.3 mm (0.012")
Pressure:
p1 (media) = vacuum14 (23)bar (203 (334 PSI))
p3 (buffer fluid) = max. 16 (25)bar (232 (363 PSI))
p3 > p1 = min. 2bar (29 PSI), max. 10bar (145 PSI)
Temperature:
t1 (media) = 20C+200 (300)C
(4F+392 (572)F)
Sliding velocity: vg = max. 10(20)m/s (33(66)ft/s)
For applications beyond this range, please inquire.

Standards and approvals

Material approvals: FDA
Recommended seal supply
Closed circuit: EagleBurgmann TS system,
EagleBurgmann DRU pressure booster
Sterile seals:
Closed circuit: EagleBurgmann TS system sterilizable.
Open circuit: EagleBurgmann SPA/SPN
Dimensions
Dimensions on request

114

2 3 1

4 5
d5
d6

d4
d3
d 2 H7
d1
d w h6
> 50 h8

Features
For top, lateral and bottom drives
Product side seat rotating
Unbalanced
Double seal
Independent of direction of rotation
Cartridge unit

Advantages
Smooth surface with no empty spaces
CIP-/SIP (Cleaning in Place, Sterilization in Place)
Sliding materials FDA conform
Variant for sterile applications available

l5

l4

l1

l3

l6

l5

Item Description
1
Seal face, product side
2
Seat, product side
3, 4 O-Ring, dynamic
4
Seal face, atmosphere side
5
Seat, atmosphere side

Recommended applications
Petrochemical industry
MR34-D20 EagleBurgmann
Chemical industry
Pharmaceutical industry
Food and beverage industry
Sugar industry
Reactors
Materials
Mixers
Kneaders
Product side:
Seal face, seat: Silicon carbide (Q1), Tungsten carbide (U) Mills
Dryers
Metal parts: Cr steel (E), CrNiMo steel (G),
Pressure filters
Hastelloy (M)
Atmosphere side:
Seal face, seat: Silicon carbide (Q1),
Carbon graphite resin impregnated (B)
Metal parts: Cr steel (E), CrNiMo steel (G)
Product and atmosphere side:
Springs: CrNiMo steel (G), Hastelloy (M)
Secondary seals: EPDM (E), FKM (V), FFKM (K),
FKM, FEP wrapped (M5)
Other materials on request.

Optionen
Cooling or heating flange
Temperature probe
Axial expansion joint (shaft lifting)
Wiper ring (shaft lifting)
Please inquire.

B, G

A, C
Supply connections
MR-D EagleBurgmann
A Barrier fluid IN
B Barrier fluid OUT
C Drainage
G Grease

Drive key
Torque transmission

Clamping set
T-Shrink disk II EagleBurgmann

Shrink disk
Clamping ring with pin
Clamping ring

Special designs on request.

115
Klemmring EagleBurgmann

Drehmomentbertragung

Klemmring mit Stift EagleBurgmann

Drehmomentbertragung

Clampingset EagleBurgmann

Torque transmission

Drive key EagleBurgmann

Torque transmissions

Mechanical seals Agitator seals Liquid-lubricated seals

HS-DHSL-D

l3

HS-D

l3

G
C

1
4

L1

L2

11
10

Features
For top drive entries
Multiple seals rotating
Unbalanced
Double seal
Independent of direction of rotation
Liquid-lubricated
Cartridge unit

Advantages
Patented hydrodynamic grooves
High reliability and long service life
Designed for medium pressure range
Ready-to-fit and factory-tested units
Connection dimensions to customers requirements
Due to the hydraulic product pressure as well overlaying
barrier pressure closes the seal.
Operating range (see note on page 1)
Shaft diameter: dw = 20500 mm (0.79"19.69")
Pressure: p1 = vacuum30bar ( 435 PSI)
Temperature: t = 40C+200 (350)C
(40F+392 (662))F
Sliding velocity: vg = 05 m/s (016 ft/s)
For applications beyond this range, please inquire.

Product variants
HS-D
Double seal, unbalanced.
HSL-D
Double seal, unbalanced, with integrated floating bearing.

Dimensions in mm

dw
40
50
60
80
100
120
140
160
180
200

116

d1
200
230
255
295
315
345
380
440
475
465

n x d2
6 x 18
8 x 18
8 x 18
8 x 23
8 x 23
8 x 23
12 x 23
12 x 27
12 x 27
12 x 27

d3
80
100
120
145
170
190
215
240
260
290

k
170
200
225
260
280
310
345
395
430
420

L1
115
120
140
145
160
160
165
185
185
190

L2
170
185
210
230
245
250
265
300
310
290

I3
35
35
35
44
44
50
50
50
55
55

I4
45
55
60
60
65
65
65
75
75
75

2
12
9
13
dw

h8

d3

H8
e8

d2

k
d1

Item Description
1
Seal face, atmosphere side HSD EagleBurgmann
HSLD EagleBurgmann

2
Seal face, product side
4, 5, 11, 12, 13 O-Ring
9
Seat, product side
10
Seat, atmosphere side

G, F
A
C
S

Materials
According to application and customers specification
Recommended seal supply
Open barrier fluid circuit
e.g. EagleBurgmann SPA, EagleBurgmann SPN
Optionen
Petrochemical industry
Chemical industry
Pharmaceutical industry
Suitable for all media

Standards and approvals

Material approvals: FDA

5
l4

Top entry drives:

Reactors
Agitators
Dryers
Mixers
Filter
Special rotating equipment

B
D
G, E

Supply connections
HS-D EagleBurgmann
A
B
C
D
E
F
G
S

Barrier fluid IN
Barrier fluid OUT
Drainage
Leakage drain G1/8"
Cooling IN G3/8"
Cooling OUT G3/8"
Grease
Flush

Options
Cooling or heating flange
Leakage drain, flush or heating flange
Leakage drain or flush
Polymerization barrier, leakage drain or flush
See page 107.

HSH-D
HSH(V)-DHSHL(V)-D

G
C

13

12
1

B
4
5

Item Description
1
Seal face, atmosphere side
2
Seal face, product side
4, 5, 13, 14 O-Ring
11
Seat, product side
12
Seat, atmosphere side
Materials
According to application and customers specification
Recommended seal supply
Open barrier fluid circuit
e.g. EagleBurgmann SPA, EagleBurgmann SPN
Recommended applications
Petrochemical industry
Chemical industry
Pharmaceutical industry
Suitable for all media
Reactors
Agitators
Dryers
Mixers
Filter
Special rotating equipment

Drehmomentbertragung

Torque transmission

Clampingset EagleBurgmann

Torque transmissions (HS-D, HSH-D)

T-Shrink disk II EagleBurgmann

Clamping set

Shrink disk

Clamping ring with pin

Product variants
HSH(V)-D
Double seal
HSH(V)L-D
Double seal with integrated floating bearing (axial thrust
bearing on request).
Dimensions
Dimensions on request
Optionen
Cooling or heating flange
Leakage drain, flush or heating flange
Leakage drain or flush
Polymerization barrier, leakage drain or flush
See page 107.

G, F
A
C
S
Drehmomentbertragung

* Depending on size, from 100150bar (1,4502,175 PSI

executed as tandem seal (pressure reduction in 2 stages).

14

Klemmring mit Stift EagleBurgmann

Operating range (see note on page 1)

Shaft diameter: dw = 20400 mm (0.79"15.75")
Pressure: p1 = vacuum250bar (... 3,625 PSI)*,
p3 = p1 + 10 %
Temperature: t = 40C+200 (350)C
(40F+392 (662)F)
Sliding velocity: vg = 05 m/s (016 ft/s)

11

Klemmring EagleBurgmann

Features
For top drive entries
Multiple springs rotating
Balanced
Double seal
Independent of direction of rotation
Liquid-lubricated
Cartridge unit
on request with integrated bearing

Advantages
Patented hydrodynamic grooves
High reliability and long service life
Designed for medium and high pressure range
Ready-to-fit and factory-tested units
Connection dimensions to customers requirements
The hydraulic conditions are selected so that the product
pressure as well as the overlaying barrier pressure closes
the seal.

B
D
G, E

Supply connections
HS-D EagleBurgmann

Clamping ring

A
B
C
D
E
F
G
S

Barrier fluid IN
Barrier fluid OUT
Drainage
Leakage drain G1/8"
Cooling IN G3/8"
Cooling OUT G3/8"
Grease
Flush

117

Mechanical seals Agitator seals Liquid-lubricated seals

HSHLU-D
30
14

11
2

1
12

13

B
A

Features
For bottom drive entries
Multiple springs rotating
Balanced
Double seal
Independent of direction of rotation
Liquid-lubricated
Cartridge unit
On request with integrated bearing

Advantages
High pressure seal for process orientated solutions
Patented hydrodynamic grooves
Floating throttle ring on the product side
High reliability and long service life
Ready-to-fit and factory-tested units
Connection dimensions to customers requirements
Due to the hydraulic conditions, product pressure as well
overlaying barrier pressure closes the seal.
Operating range (see note on page 1)
Shaft diameter: dw =400 mm (15.75")
Pressure: p1 = vacuum60bar (870 PSI)
Temperature: t = 40C+200C
(40F+392F) Sliding velocity: vg = 05 m/s
(016 ft/s)
For applications beyond this range, please inquire.

Item
1
2
4, 5, 13, 14
11
12
30

Description
Recommended applications
Seal face, atmosphere sideHSHLUD EagleBurgmann
Petrochemical industry
Seal face, product side
Chemical industry
O-Ring
Suitable for all media
Seat, product side
Agitators
Seat, atmosphere side
Reactors
Throttle ring
Dryers
Mixers
Materials
Filters
Special equipment
According to application and customers specification
Recommended seal supply
Open barrier fluid circuit
e.g. EagleBurgmann SPA, EagleBurgmann SPN

Dimensions
Dimensions on request
Optionen
Cooling or heating flange
Leakage drain, flush or heating flange
Leakage drain or flush
See page 107.

G
A
C
S

Supply connections
HSHLU-D EagleBurgmann
A
B
C
G
S

118

Barrier fluid IN
Barrier fluid OUT
Drainage
Grease
Flush

Mechanical seals Agitator seals Shut-down seals

STD1
l 0,2
P4

R t <5

d3

max

d1

Advantages
If a STD is employed, it is possible to change seals with
the vessel loaded and under pressure (shaft must be
stationary!). Can be installed in each position. Installation
dimensions according to DIN 28138 Part 1 are possible.
Material properties have to be taken into account.
Operating range (see note on page 1)
Shaft diameter: dw = 40200 mm (1.57"7.87")
Pressure: p1 = 16bar (232 PSI)
Temperature: t = 100C (212F)

Recommended applications
Chemical industry
Pharmaceutical industry
Agitators

Note
This seal can only be used if the product does not harden
STD1 EagleBurgmann
or congeal during the shut down period or for sterile
operation (fermenting vessels). Not available in PTFE.

Elastomer sealing element (Item no. 1) with pneumatic or

hydraulic actuation (closing pressure p4 > p1).
Dimensions in mm

d3
40
50
60
80
100
125
140
160
180
200

D
76
84
95
118
138
160
180
200
215
240

d
42.5
52.5
62.5
82.5
102.5
127.5
143.5
163.5
183.5
203.5

d1
42
52
62
82
102
127
143
163
183
203

l
38.0
38.0
44.5
45.0
45.0
45.0
50.0
50.0
50.0
50.0

b
8
8
10
10
10
10
12
12
12
12

119

Mechanical seals Compressor seals Gas-lubricated seals

DGS
lB

l3
A

5 2

3 11

3
Ds3

DH

D3

10

Compressor seals of the DGS series are based on

acommon technology and technical features, for instance
O-Rings as secondary sealing elements. Thedifferent
product variants are tailored to particular fields of
application. The advantage over other products on the
market is hidden in the detail. For example, the torque is
transmitted to the rotating seat by friction forces only. And
thus no holes and resulting weakening of the material are
needed.
Features
Gas-lubricated
Uni-directional or bi-directional
Ready-to-fit cartridge unit
Single, double, tandem and tandem with intermediate
labyrinth available
Separation seals as labyrinths, radial clearance seals or
CobaSeal are optionally available
Advantages
Wear-free and contact-free operation
Self-cleaning 3D gas grooves
High gas film stiffness
Secure cupped retainer for seat
Available in various materials for optimized chemical
resistance
Proven, reliable and economical solution
Operating range (see note on page 1)
Shaft diameter: ds1 = 29400 mm (1.14"15.75")
Pressure: p = 0160bar (2,320PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = up to 227m/s (744ft/s)

120

Materials
DGS Tandem seal with intermediate labyrinth
Seal face: Silicon carbide with DLC coating,
Application: where product leakage to the atmosphere is
Carbon graphite
unacceptable, e.g. H2, ethylene or propylene compressors.
Seat: Silicon carbide with DLC coating DGS Tandem mit Labyrinth
WiththisEagleBurgmann
type of seal, the product pressure to be sealed
Secondary seals: FKM
is reduced via the seal on the process side. The entire
Metal parts: 1.4006 or other stainless steels
process gas leakage is routed to the flare via connection
B. The bearing side seal is pressurized with secondary
Other materials on request.
seal gas (nitrogen) via connection C. The pressure of the
secondary seal gas ensures the flow through the labyrinth
Available also with EagleBurgmann DiamondFace
to the flare/tapping point.
technology.
A
Primary seal gas supply
Standards and approvals
B
Primary vent
NACE
C
Secondary gas seal supply
S
Secondary vent
Recommended applications
D
Separation gas supply
Oil and gas industry
Item Description
Refining technology
Petrochemical industry
1
Seal face, stationary
Hydrocarbon gas
2
Seat, rotating
Ammonia
3
Thrust ring
Nitrogen
4
Spring
Air
5
Shaft sleeve and seat retainer
Centrifugal compressors
6
Intermediate sleeve and seat retainer
Turbo expanders
7, 8 Housing (size matched to installation space)
Blowers
9
Separation seal (CSR)
10 Labyrinth
11 Intermediate labyrinth

10

8 1

D1

Ds2
1

Product variants
DGS Tandem EagleBurgmann
DGS32
Due to the cost effective design, simple components and a
hard/soft sliding material combination the DGS32 represents
a reliable and economical solution for applications with
partial contact of seal faces. This include, for example,
slow-roll and turning operation (steam turbine driven
compressors) or long and very frequent start/stop cycles.
Operating range
Shaft diameter: ds1=30400mm (1.18"15.75")
Pressure: p = 0120bar (01,740PSI)
Temperature: t = 20C+150C (4F+302F)
Sliding velocity: vg = 0140m/s (0295ft/s)
Materials
Seal face: Carbon graphite
Seat: Silicon carbide
Secondary seals: FKM or other elastomers
depending on product gas composition
Metal parts: 1.4006 or other stainless steels

eDGSTandem EagleBurgmann

l1

Buffer gas supply

Seal gas supply
Vent
Separation gas supply

l4

lB
B

10

1
Ds1

DH

D2

10

lB
S

A
C
S
D

D4

l2
A

Seal gas supply

Vent
Separation gas supply

DGS Double seal

Application: where product leakage to the atmosphere/
flare is unacceptable or for low pressure applications.
Seal gas leakage into the product needs to be permitted
(seal gas pressure p3 > p1). This is used when aneutral
seal gas is available at the appropriate pressure.
Typical applications can be found in the chemical and
petrochemical industries, e.g. in HC gas compressors.
A seal gas, e.g. nitrogen at a pressure higher than the
product pressure, is supplied between the seals via
connection C. Part of the seal gas leakage dissipates to
the bearing side, while the other part goes to the product.

DGSSingle EagleBurgmann

DGS20
Seals of the DGS20 series are the standard for medium
pressures up to 120 bar (1,740 PSI). They have proven
their suitability in thousands of applications worldwide. The
seals are very rugged and are based on a mature design
concept.
Operating range
Shaft diameter: ds1=40280mm (1.57"11.02")
Pressure: p = 20120bar (2901,740PSI)
Temperature: t = 20C+150C (4F+302F)
Sliding velocity: vg = up to 227m/s (744ft/s)
Materials
Seal face: Silicon carbide with DLC coating
Seat: Silicon carbide with DLC coating
Secondary seals: FKM or other elastomers
depending on product gas composition
Metal parts: 1.4006 or other stainless steels

lB

4 3

Ds4

Primary seal gas supply

Primary vent
Secondary vent
Separation gas supply

A
B
D

DH

A
B
S
D

DGS Single seal

Application: where leakage of the product into the
atmosphere is not harmful, e.g. from air or nitrogen
compressors or the axial cavity does not allow a tandem
seal (e.g. geared compressors). This version allows
process gas leakage to the corresponding flare / vent
connection. Primary seal leakage is dissipated with the
separation gas to the vent. The gas to be sealed must also
be filtered and routed to the seal chamber via connection
A. The resulting flow from the sealed space to the
impeller side prevents contaminated / wet gas reaching
the Dry Gas Seal on the process gas side, e.g. towards the
labyrinth.

DH

Other available seal arrangements

DGS Tandem seal
Application: where no N2 is available and minimal process
gas leakage to the atmosphere is acceptable, e.g. gas pipeline
compressors. The seal on the bearing side is intended as a
safety seal. The tandem arrangement offers particularly good
operational safety. The process side and bearing side seals
are able to withstand the full pressure. In normal operation,
only the process side seal reduces the full pressure. The
space between the process side and bearing side seals is
routed to the flare via connection B. The pressure to be
sealed on the bearing side corresponds to the flare pressure.
There is thus very little leakage to the bearing side or to the
vent. If the primary seal fails, the secondary seal is activated
as a back-up and operates at primary seal conditions.

DGS double EagleBurgmann

DGS21
Seals of the DGS21 series offer the lowest leakages of
theelastomer-based DGS platform. They are therefore
suitable for applications with high demands on low
leakage. As some parts of the high-pressure PDGS series
are used in the DGS21 series, the seal can be applied
upto a pressure of 160 bar (2,320 PSI).

Operating range
Shaft diameter: ds1=68280mm(2.68"11.02")
Pressure: p = 50160bar (7252,320PSI)
Temperature: t = 20C+150C (4F+302F)
Sliding velocity: vg = up to 227m/s (744ft/s)
Materials
Seal face: Silicon carbide with DLC coating
Seat: Silicon carbide with DLC coating
Secondary seals: FKM or other elastomers
depending on product gas composition
Metal parts: 1.4006 or other stainless steels

121

Mechanical seals Compressor seals Gas-lubricated seals

PDGS
l3
A

5 2

3 11 2

4
DS3

DH

D3

10

lB

6 8

A well-established compressor seal for high pressure and

both low and high temperature applications. Innovative
design features allow it to cope with even the highest
pressures without problems. The application of U-cups and
special dynamic sealing elements opens up a wide range
of uses for this versatile and successful seal series.
Features
Gas-lubricated
Uni-directional or bi-directional
Elastomer-free
Ready-to-fit cartridge unit
Single, double, tandem seal and tandem with
intermediate labyrinth available
Separation seals as labyrinths, radial clearance seals or
CobaSeal are optionally available
Advantages
Wear-free and contact-free operation
Self-cleaning 3D gas grooves
High gas film stiffness
Secure cupped retainer for seat
Available in various materials for optimized chemical
resistance
Proven, reliable and economical solution
Operating range (see note on page 1)
Shaft diameter: Ds1 = 29355 mm (1.14"13.98")
Pressure: p = 0450bar (06,525 PSI)
Temperature: t = 170C+230C
(274F+446F)
Sliding velocity: vg = 0.6200 m/s
(2 ft/s656 ft/s)
Standards and approvals
NACE

Materials
PDGS Tandem seal with intermediate labyrinth
Seal face: Silicon carbide with DLC coating
Application: where product leakage to the atmosphere is
EagleBurgmann
Seat: Silicon carbide with DLC coatingPDGSTandem mit Labyrinth
unacceptable,
e.g. H2, ethylene or propylene compressors.
Secondary seals: Polymer rings
With this type of seal, the product pressure to be sealed
Metal parts: 1.4006 or other stainless steels.
is reduced via the seal on the process side. The entire
process gas leakage is routed to the flare via connection
Other materials on request.
B. The bearing side seal is pressurized with secondary
seal gas (nitrogen) via connection C. The pressure of the
Available also with EagleBurgmann DiamondFace
secondary seal gas ensures the flow through the labyrinth
technology.
to the flare/tapping point.
Recommended applications
Oil and gas industry
Refining technology
Petrochemical industry
Hydrocarbon gas
Ammonia
Nitrogen
Refrigerants
Air
Centrifugal compressors
Turbo expanders
Blowers

Main components of the dynamic secondary seal of the

PDGS are made of the extremely rigid material tungsten
PDGS Einzelheit
EagleBurgmann
carbide which allows
an optimum
control of the extrusion
clearance over the full range of operation. The specific
design of the polymer cup seals ensures minimum sliding
forces combined with wear-free operation.
122

A
B
C
S
D

Primary seal gas supply

Primary vent
Secondary gas seal supply
Secondary vent
Separation gas supply

Item Description
1
Seal face, stationary
2
Seat, rotating
3
Thrust ring
4 Spring
5
Shaft sleeve and seat retainer
6
Intermediate sleeve
7, 8 Housing (size matched to installation space)
9
Separation seal (CSR)
10 Labyrinth
11 Intermediate labyrinth

10

8 1

D1

DS2

DH

D2

10

l1

Product variants
PDGS Tandem EagleBurgmann
PDGS51
The PDGS51 was developed for use in extreme high
pressure applications. Adapted sliding faces and an
innovative design of the shaft sleeve allow pressures up
to 450 bar (6,525PSI) and more. Most of these seals are
successful in use in compressors for gas injection.
Operating range
Shaft diameter: ds1=100165mm (3.94"6.49")
Pressure: p = bis zu 450bar (6,525PSI)
Temperature: t = 50C+230C (58F+446F)
Sliding velocity: vg = 0,6190m/s (2623ft/s)
Materials
Seal face: Silicon carbide with DLC coating
Seat: Silicon carbide with DLC coating
Secondary seals: Polymer rings
Metal parts: 1.4006 or other stainless steels

lB

l4

10

PDGSSingle EagleBurgmann

PDGS10
The PDGS10 is the standard seal for high pressures
up to 220 bar (3,191 PSI). Since many years the seal
demonstrates their reliability worldwide in a wide variety
of applications. It is characterized by very low leakage
and sets the standard in the market for low-emission
compressor gas seals.
Operating range
Shaft diameter: ds1 = 40390mm(1.57"15.35")
Druck: p = 0220bar (7253,191PSI)
Temperature: t = 50C+230C (58F446F)
Sliding velocity: vg = up to 227m/s (744ft/s)
MaterialsSeal face: Silicon carbide with DLC coating
Seat: Silicon carbide with DLC coating
Secondary seals: Polymer rings
Metal parts: 1.4006 or other stainless steels

lB

5 2
1

Buffer gas supply

Seal gas supply
Vent
Separation gas supply

DS1

lB

A
C
S
D

2
Ds4

l2

Seal gas supply

Vent
Separation gas supply

PDGS Double seal

Application: where product leakage to the atmosphere/
flare is unacceptable or for low pressure applications.
Seal gas leakage into the product needs to be permitted
(seal gas pressure p3 > p1). This is used when a
neutral seal gas is available at the appropriate pressure.
Typical applications can be found in the chemical and
petrochemical industries, e.g. in HC gas compressors.
A seal gas, e.g. nitrogen at a pressure higher than the
product pressure, is supplied between the seals via
connection C. Part of the seal gas leakage dissipates to
the bearing side, while the other part goes to the product.

DH

Primary seal gas supply

Primary vent
Secondary vent
Separation gas supply

A
B
D

DH

A
B
S
D

PDGS Single seal

Application: where leakage of the product into the
atmosphere is not harmful, e.g. from air or nitrogen
compressors or the axial cavity does not allow a tandem
seal (e.g. geared compressors). This version allows
process gas leakage to the corresponding flare / vent
connection. Primary seal leakage is dissipated with the
separation gas to the vent. The gas to be sealed must also
be filtered and routed to the seal chamber via connection
A. The resulting flow from the sealed space to the
impeller side prevents contaminated / wet gas reaching
the Dry Gas Seal on the process gas side, e.g. towards the
labyrinth.

D4

Other available seal arrangements

PDGS Tandem seal
Application: where no N2 is available and minimal process
gas leakage to the atmosphere is acceptable, e.g. gas
pipeline compressors. The seal on the bearing side is
intended as a safety seal. The tandem arrangement offers
particularly good operational safety. The process side and
bearing side seals are able to withstand the full pressure.
In normal operation, only the process side seal reduces
the full pressure. The space between the process side and
bearing side seals is routed to the flare via connection B.
The pressure to be sealed on the bearing side corresponds
to the flare pressure. There is thus very little leakage to
the bearing side or to the vent. If the primary seal fails, the
secondary seal is activated as a back-up and operates at
primary seal conditions.

7 3

PDGS double EagleBurgmann

PDGS15
The PDGS15 series enable the sealing of very cold media
up to -200C (328F). Therefore special, cold-resistant
steels are used. For years, these seals are successfully
used in LNG liquefaction plants, for example.
Operating range
Shaft diameter: ds1 = 40390mm (1.57"15.35")
Pressure: p = 050bar (725PSI)
Temperature: t = 200C+230C (328F446F)
Sliding velocity: vg = up to 227m/s (744ft/s)
Materials
Seal face: Silicon carbide with DLC coating
Seat: Silicon carbide with DLC coating
Secondary seals: Polymer rings
Metal parts: 1.4006 or other stainless steels

123

Mechanical seals Compressor seals Gas-lubricated seals

MDGS
A

2
7 1

EagleBurgmann MDGS are rugged seals for screw

compressors. They have a rotating ring made from ductile
material with a high-performance coating. Rotating
rings are in-situ shrouded, making them practically
indestructible. The coating offers excellent wear resistance
in the low speed range (e.g. coast-down operation) in
which contact between the seal faces is unavoidable.
The stationary, spring-mounted system is optionally
available as a sub-cartridge in combination with
arotating seat made from ductile material. A secondary
sealing function using O-rings allows it to be applied
asacomponent seal.
Features
Gas-lubricated
Bi-directional
Compact, radial design
Ready-to-fit cartridge unit, also available as
a component seal
Single, double, tandem seal and tandem with
intermediate labyrinth available
Advantages
Wear-free and contact-free operation
Self-cleaning 3D gas grooves
High gas film stiffness
Fits into small spaces (e.g. process gas screw
compressors)
Available in various materials for optimized chemical
resistance
Proven, reliable and economical solution
Operating range (see note on page 1)
Shaft diameter: d1 = 48200 mm (1.89"7.87")
Pressure: p = 050bar (0725 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 0.6200 m/s (2656 ft/s)

124

10
6

2
8

Materials
Tandem seal with intermediate labyrinth
MDGS Tandem mit LabyrinthMDGS
EagleBurgmann
Seal face: Carbon graphite
Application: where product leakage to the atmosphere is
Seat: Ductile stainless steel with DM-TiN coating
unacceptable, e.g. H2, ethylene or propylene compressors.
Secondary seals: FKM
With this type of seal, the product pressure to be sealed
Metal parts: 1.4006 or other stainless steels.
is reduced via the seal on the process side. The entire
process gas leakage is routed to the flare via connection
Standards and approvals
B. The bearing side seal is pressurized with secondary
NACE
seal gas (nitrogen) via connection C. The pressure of the
secondary seal gas ensures the flow through the labyrinth
Recommended applications
to the flare/tapping point.
Oil and gas industry
Refining technology
A
Primary seal gas supply
Petrochemical industry
B
Primary vent
Hydrocarbon gas
C
Secondary gas seal supply
Nitrogen
S
Secondary vent
Air
D
Separation gas supply
Centrifugal compressors
Item Description
Dry process gas screw compressors
Blowers
1
Seal face, stationary
2
Seat, rotating
3
Thrust ring
4
Spring
5 Adapter
6
Shaft sleeve, Intermediate sleeve
7, 8 Housing (size matched to installation space)
9
Carbon ring separation seal (CSE)
10 Intermediate labyrinth

Other available seal arrangements

MDGS Tandem seal
Application: where no N2 is available and minimal process
gas leakage to the atmosphere is acceptable, e.g. gas
pipeline compressors. The seal on the bearing side is
intended as a safety seal. The tandem arrangement offers
particularly good operational safety. The process side and
bearing side seals are able to withstand the full pressure.
In normal operation, only the process side seal reduces
the full pressure. The space between the process side and
bearing side seals is routed to the flare via connection B.
The pressure to be sealed on the bearing side corresponds
to the flare pressure. There is thus very little leakage to
the bearing side or to the vent. If the primary seal fails, the
secondary seal is activated as a back-up and operates at
primary seal conditions.
Primary seal gas supply
Primary vent
Secondary vent
Separation gas supply
A

7 1

2
6

A
C
S
D

Buffer gas supply

Seal gas supply
Vent
Separation gas supply

4
3

d2

MDGS Double seal

Application: where product leakage to the atmosphere/
flare is unacceptable or for low pressure applications.
Seal gas leakage into the product needs to be permitted
(seal gas pressure p3 > p1). This is used when a
neutral seal gas is available at the appropriate pressure.
Typical applications can be found in the chemical and
petrochemical industries, e.g. in HC gas compressors.
A seal gas, e.g. nitrogen at a pressure higher than the
product pressure, is supplied between the seals via
connection C. Part of the seal gas leakage dissipates to
the bearing side, while the other part goes to the product.

d1

A
B
S
D

MDGS Single seal

Application: where leakage of the product into the
atmosphere is not harmful, e.g. from air or nitrogen
compressors or the axial cavity does not allow a tandem
seal (e.g. geared compressors). This version allows
process gas leakage to the corresponding flare / vent
connection. Primary seal leakage is dissipated with the
separation gas to the vent. The gas to be sealed must also
be filtered and routed to the seal chamber via connection
A. The resulting flow from the sealed space to the
impeller side prevents contaminated / wet gas reaching
the Dry Gas Seal on the process gas side, e.g. towards the
labyrinth.

1
4

2
7

4
1

MDGS Tandem EagleBurgmann

MDGS EagleBurgmann

MDGS Dual EagleBurgmann

125

Mechanical seals Compressor seals Gas-lubricated seals

ds

The gas seal for single-stage steam turbines. A metal

bellows allows it to work reliably even at high temperatures.
Any steam leakage that does occur will be just a fraction of
the leakage from carbon ring seals. This both saves energy
and improves the performance of the turbine. The bearing oil
is no longer contaminated by condensed steam, extending
the bearing life and reducing maintenance costs accordingly.
Features
Gas-lubricated
Uni-directional or bi-directional
Elastomer-free, no dynamic O-ring
Ready-to-fit cartridge unit
Single seal available
Advantages
Wear-free and contact-free operation
Self-cleaning 3D gas grooves
High gas film stiffness
Extremely low steam leakage
Bearing oil not contaminated with condensed steam
Operating range (see note on page 1)
Shaft diameter: ds = 40140 mm (1.57"5.51")
Pressure: p = 010bar (0145 PSI)
Temperature: t = 50C+450C
(58F+842F)
Sliding velocity: vg = 130 m/s (427 ft/s)

d1

TDGS

l1

Materials
Seal face: Carbon graphite
Seat: Silicon carbided
Standards and approvals
NACE
Recommended applications
Refining technology
Petrochemical industry
Power plant technology
Single stage steam turbines

Item Description
1
Seal face, stationary
2
Seat, rotating
3 Sleeve
4
Metal bellows cartridge unit
5
Shaft sleeve
6
Housing (size matched to installation space)
7
Clamping ring

TDGS EagleBurgmann

One outstanding feature of the EagleBurgmann gas grooves

is its inclined bottom (picture: V-grooves, uni-directional).
Thelack of sharp baffle
at the groove outlet allows
TDGSedges
EagleBurgmann
dirt particles to be pulled through the sealing gap, reliably
avoiding any clogging and guaranteeing safe operation.
Ifdeposits do build up in the sealing gap while the turbine is
idle, they are expelled once the machine is restarted.

126

Mechanical seals Compressor seals Gas-lubricated seals

NF941
l1

min

l2

min

Features
Single seal with double seal function
Non-contacting from static to high speed condition
Balanced
Bi-directional
Stationary multiple springs
Advantages
Wear-free and contact-free operation
Prevents the ingress of foreign particles
Operating range (see note on page 1)
Pressure: p = 5bar (73 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 60 m/s (197 ft/s)

d1

min

15
max

12 10 8

Seals from the NF941 series are used in screw compressors

for special applications. They are hybrid seals that seal
both aerostatically and aerodynamically. The separation gas
is routed through holes in the stationary seal ring directly
between the seal faces, while the lift-off is caused by
specially designed gas grooves.

ds

1 3 11

ds

dm

d2

min

13

5 9 14

Materials
Item
Description
Seal face: High-density carbon graphite
1
Seal face
Seat: Ductile stainless steel with TiN-coating orNF941
silicon EagleBurgmann
2, 3, 6, 8, 12, 13 O-Ring
carbide
4
Spring
Secondary seals: FKM
5
Adapter
Metal parts: CrNiMo steel
7
Housing
9, 15
HSH Cap screw
Recommended applications
10
Seat
Process industry
11
Shaft sleeve
Single wafer cleaning systems
14
Clamp sleeve
Dry screw compressors
Blowers
A
Seal gas supply
Agitators

127

Mechanical seals Compressor seals Oil-lubricated seals

WRS
B

WRS
Double seal

13

The WRS is an oil-lubricated seal that safely seals

various types of compressors and organic media. With its
rugged design, low life-cycle costs and long service life,
the WRS can be found in thousands of applications. The
design is optimized by using the finite element method and
computational fluid dynamics.
Features
Oil-lubricated
Bi-directional
Externally pressurized
Ready-to-fit cartridge unit
Single, face bushing and double seal available
Suitable for high speed
Hydrodynamic grooves for increased operating
capabilities and stabilized low leakage
Advantages
Low oil consumption
Rugged seat with bandage ensures reliable operation
Wear-free operation by use of lift-off-design
Does not open if oil pressure drops
Operating range (see note on page 1)
Shaft diameter: 30300 mm (1.18 "11.81")
Pressure: p =50bar (725 PSI)
Gas temperature: t = -20C+200C
(-4F+392F)
Sliding velocity: vg =5100m/s (16328ft/s)
Oil viscosity: ISO VG up to 68

Materials
Item Description
WRSdouble EagleBurgmann
Seal face: Silicon carbide
1
Seat, rotating
Seat: Silicon carbide
2
Seal face, stationary
Secondary seals: FKM
3
Face housing
Metal parts: 1.4006 or other stainless steels
6
Spring
7
Shaft sleeve
Standards and approvals
13 Housing
NACE

A
Oil IN
Recommended applications
B
Oil OUT
Oil and gas industry
Refining technology
Petrochemical industry
Refrigerants
Screw compressors
Centrifugal compressors
Geared compressors
Product variants
WRS Single seal

WRS Single seal with face bushing

8 3

WRS20E1 EagleBurgmann

WRS10ED1 EagleBurgmann

128

Mechanical seals Compressor seals Oil-lubricated seals

EBU800
A

2.6 2.7 2.2 1.2 1.1

2.5 2.4 2.3

This special shaft seal is characterized by its

straightforward structure, compact length and quiet
running even under changing pressure conditions. It also
seals reliably at both high and low temperatures.
Features
Oil-lubricated
Double seal
Balanced
Bi-directional
Stationary bellows (process side)
Multiple springs (bearing side)
Shrink-fit seat
Double-pressure balanced
Advantages
Suitable for high sliding velocities
Seal does not open if oil pressure drops
Rugged seat with bandage ensures reliable operation
Compact design with few sealing components
Operating range (see note on page 1)
Shaft diameter: d =220 mm (8.66")
Pressure: (p2-p1) =5bar (73 PSI)
Sliding velocity: vg = 90 m/s (295 ft/s)

3.1 3.2 4
8 75

EBU800 EagleBurgmann
Materials
Item
Description
Bellows: AM350, Inconel 718, Hastelloy-C
1.1
Seat
1.2, 2.3, 3.2 Retainer
Seal face: Special SiC, high-density carbon graphite
2.2, 3.1
Seal face
Seat: Silicon carbide
2.4 Bellows
Secondary seals: FKM (bearing side)
2.5
Adapter
Metal parts: 1.4301, Carpenter 42, Inconel 718,
4
O-Ring
Hastelloy-C
5
Spring
Recommended applications
2.6, 6
Housing
2.7
Damper
Oil and gas industry
7
Retaining ring
Refining technology
8
Sleeve
Petrochemical industry
9
Spacer

A
Oil IN
B
Oil OUT
C
Drain

129

Mechanical seals Compressor seals Separation seals

CSE
D
5

DN

d2

1
d S1

2
lb

The service-proven bearing oil seal with low gas

consumption. Non contact type carbon rings are segmented
rings held together by a garter spring at the outer diameter.
A defined minimum radial gap provides a contact- free
operation. Robust design and reliable operation provide
secure oil sealing even at extreme conditions.
Features
Non-contact type separation seal
Gas-lubricated
Bi-directional
Ready-to-fit cartridge unit
Equipped with Espey carbon rings type WKA400
Advantages
Low leakage
Slow roll capability
Insensitive to dry nitrogen
Operating range (see note on page 1)
Shaft diameter: 38390 mm (1.50"15.35")
Design pressure: p =10bar (145 PSI)
Operating pressure: p = 0.10.2 bar (1.452.90 PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 0200 m/s (656 ft/s)
Dew point: No limitation

Materials
Item
Seal face: Carbon graphite impregnated CSE EagleBurgmann
1
Secondary seals: FKM
2
Shaft sleeve: Stainless steel, TC-coated
3
Metal parts: 1.4006 or other stainless steels
4
5
Standards and approvals
D
NACE
Recommended applications
Oil and gas industry
Refining technology
Petrochemical industry
Nitrogen
Air
Centrifugal compressors
Turbo expanders
Screw compressors
Blowers

Description
Shaft sleeve
Segmented carbon ring
Garter spring
Housing of the standardized sub-cartridge
Housing (size matched to installation space)
Separation gas

FO

PI

PCV

Seal
Piping and instrumentation diagram of a CSE
(flow controlled separating gas supply).

Schaltplan CSE EagleBurgmann

Project specific special designs possible.

1,600

50

1,400
1,200

40

800

30

600

20

400
10

200
0

0
50 75 100 125 150 175 200 225 250 275 300 325 350 375 400
2.0" 3.0" 3.9" 4.9" 5.9" 6.9" 7.9" 8.9" 9.8" 10.8" 11.8" 12.8" 13.8" 14.8" 15.7"

Nominal size DN (mm/inch)

Gas flow rate towards seal (required to ensure safe oil separation in every condition).
Valid for flow controlled separating gas supply.

GSE Gas consumtion EagleBurgmann

130

scfm

Nl/min

1,000

Mechanical seals Compressor seals Separation seals

CSR
D

DN

d2

1
d S1

2
l b2

Lift-off type carbon ring seals feature very low gas

consumption for both dynamic and static operation modes.
In static operation the carbon segments will contact the
shaft reducing gas consumption to a minimum. In dynamic
operation, the profiled inner surface of the segmented ring
will ensure an aerodynamic lift-off at circumferential speeds
>10 m/s (33 ft/s). The segmented carbon rings float on
avery thin gas film of few m.
Features
Lift-off type separation seal
Gas-lubricated
Bi-directional
Ready-to-fit cartridge unit

lb

Materials
Seal face: Carbon graphite impregnated
Secondary seals: FKM
Shaft sleeve: Stainless steel TC-coated
Metal parts: 1.4006 or other stainless steels

Item Description
1
Shaft sleeve
CSR EagleBurgmann
2
Segmented carbon ring
3
Garter spring
4
Housing of standardized sub-cartridge
5
Housing (size matched to installation space)
D
Separation gas

Standards and approvals

NACE

Advantages
Very low leakage
No increased leakage in static operation
Operating range (see note on page 1)
Shaft diameter: 38360 mm (1.50"14.17")
Design pressure: p = 0.510bar (7.25145 PSI)
Operating pressure: p =0.50.8bar (7.2511.60PSI)
Temperature: t = -20C+200C (-4F+392F)
Sliding velocity: vg = 10 140 m/s (33459 ft/s)
Separation gas dew point at 0.8bar (11.6PSI):
t = -50C-20C (-58F-4F)

Recommended applications
Oil and gas industry
Refining technology
Petrochemical industry
Nitrogen
Air
Centrifugal compressors
Blowers

PI
D

Seal
Piping and instrumentation diagram of a CSR (pressure
controlled separation gas supply).

60

40

p=0,8 barg
11,6 PSIG

30

1.5
1

scfm

Nl/min

50

20
10

0.5
50
2.0"

100
3.9"

150
5.9"

PCV

200
7.9"

250
9.8"

Product variant
PID CSR Schaltplan EagleBurgmann
CSR version for dry nitrogen
The CSR separation seal is also available for operation
with very dry nitrogen with a dew point of at least -90 C
(-130 F). Newly developed carbon ring materials ensure
smooth operation even when the CSR is supplied with
very pure nitrogen, from e.g. cryogenic production. The
reliability of the system can be increased significantly as
a result.

300
11.8"

Nominal size DN (mm/inch)

Separating gas consumption (expected)
Gas: N2
CSR Gas consumtion
Inlet temperature: 20 C (68 F)
Static and dynamic operation
EagleBurgmann
Guaranteed gas consumption = curve value x 2

131

Mechanical seals Compressor seals Separation seals

CobaSeal
D

3
6

Since it was launched on the market, this innovative sealing

solution has proven its worth worldwide in both first fit and
retrofit applications. It consists of a rotating seat made of
ductile material and a stationary, spring-loaded seal face.
The separation gas is routed through axial holes in the
stationary seal ring into the middle of the sliding face. It is
then divided in the sealing gap into two leakage flows which
are routed to the inner and outer diameters of the seal face.
Features
Gas-lubricated
Bi-directional
Ready-to-fit cartridge unit
Self cleaning 3D gas grooves
Aerostatic and aerodynamic lift-off
Advantages
Extremely low leakage
Double arranged (co-axial) dry gas seal with just one pair
of seal faces
Insensitive to oil contamination due to its special design
Wear-free, non-contacting operation in all conditions
Insensitive to radial vibrations due to axial sealing gap
Slow-roll or turning operation capable (static lift-off)
No limits regarding dew point of separation gas (silicon
carbide instead of carbon)
Lower N2 consumption than any other system
N2 can be switched off during standstill - the gap will
close and still provide the best oil sealing performance
Best in class oil sealing by extremely small sealing gap
and sling effect of rotating ring
Operating range (see note on page 1)
Shaft diameter: 29.5355 mm (1.16"13.97")
Design pressure (vent): p = 015bar (0218PSI)
Operating pressure: p = 2.7bar (39.16PSI)
Temperature: t = 20C+200C (4F+392F)
Sliding velocity: vg = 0150 m/s (0492 ft/s)
Dew point: No limitation

132

1 2
4 5

Materials
Seal face: Silicon carbide*
Seat: Ductile stainless steel*
Secondary seals: FKM
Metal parts: 1.4006

Item Description
1
Seal face, stationary
2
Seat, rotating
3
Thrust ring
CobaSeal EagleBurgmann
4
Spring
5
Shaft sleeve and seat retainer
6
Housing (size matched to installation space)
* With special EagleBurgmann high performance iDLC
(in situ Diamond-Like-Carbon) coating
D
Separation gas
Standards and approvals
NACE
Recommended applications
Oil and gas industry
Refining technology
Petrochemical industry
Nitrogen
Air
Centrifugal compressors
Blowers

PI
D

PCV

p2

Seal
Piping and instrumentation diagram of a CobaSeal (pressure
controlled separating gas supply).
Alternative solution: Differential pressure control for safe
regulation of
separating
gas pressure
in any operating
PIDtheCSR
Schaltplan
EagleBurgmann
condition.

1 6 3
4

11
7 14

9 10
12 13

Option
Item Description
DGS Single CobaSeal 1,9 EagleBurgmann
Single DGS + CobaSeal = Tandem seal
Seal face, stationary
The CobaSeal is not just an excellent separation seal.
2, 10 Seat, rotating
Itcan also be used as a true back-up seal for greater
3, 11 Thrust ring
safety. A DGS-CobaSeal tandem arrangement can be
4, 12 Spring
operated at sealing pressures up to 20 bar (290 PSI).
5, 13 Shaft sleeve
Itdoes not need an intermediate labyrinth with N2 supply
6
Adapter sleeve
7, 14 Housing
and existing single seals can be simply retrofitted, thus
8 Labyrinth
benefitting from increased operational safety.
The single DGS + CobaSeal combination is also shorter
than conventional tandem seals with separation seal
and costs can be saved on the gas supply system in low
pressure applications.

133

134
134

Magnetic couplings

Uncompromising sealing technology for very demanding

applications. Hermetically sealed magnetic couplings
guarantee leakage-free and maintenance-free pumping
and mixing. The media remains within closed system
circulation loops.

Couplings
MAK66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
MAK685 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
NMB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
SMAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Bearings
LMF1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

135

Magnetic couplings Couplings

S1

1.1 1.2

M6
4 x 90

MAK66
10

3.2

min 2,5

Advantages
Magnetic coupling for standard applications
Hermetically sealed
No contact of torque transmitting elements
No maintenance necessary
Hastelloy can for high performance
High efficient can optional
Product lubricated sliding bearing included
Functional description
The power transmission occurs contact-free through
magnets from the drive shaft to the product-wetted output
shaft. Between the two rotating parts is the can wich is
bolted to the container.
Operating range (see note on page 1)
Shaft diameter: d =40mm (1.57")
Pressure: p = 25bar (363PSI)
Temperature: t = 40C+250C
(40F+482F)(SmCo),
+120C (+248F)(NdFeB)
Speed: n = 3,600 min-1
Chemical resistance: pH 014
Viscosity: 0.35,000 mPas (SiC)
Torque: max. 462Nm
Solids: max. 0.1 mm; max. 5% by weight;
grain hardness max: 700 HV
Materials
Sliding faces: Silicon carbide SiC (Q1), Carbon silicon
inpregnated SiC-C-Si (Q3), Carbon graphite resin
impregnated (B)
Magnets: Samarium-Cobalt (MA3),
Neodymium-Iron-Boron (MA8)
Metal parts: CrNiMo steel 1.4571 (G), CrNiMo steel
1.4462 (G1), Hastelloy C-4 2.4610 (M))

136

3.1

3.4 3.3

l1

Features
Magnetic couplings (MAK) are a hermetic sealing solution
for pumps and agitators. Dangerous or precious media
remain isolated in the closed system circuit.

6
2 x 180

Item Description
1 Coupling
1.1
Inner rotor
1.2
Outer rotor
2 Can
3
Bearing assembly
3.1
Radial journal bearing
3.2, 3.3 Axial journal bearing
3.4
Shaft sleeve
4
HSH Cap screw
Recommended applications
Chemical industry
Oil and gas industry
Refining technology
Pharmaceutical industry
Food processing industry
Centrifugal pumps
Gear pumps
Top drive mixers/agitators
Fans
Blowers
Autoclaves

MAK66 EagleBurgmann

Product variants
Different variants are available to meet specific
requirements:
Coolable or heatable bearing arrangements
Vertical drive with dry running roller bearing
High temperature variant
Without bearing
Can variants:
Double wall
High pressure can
Ceramic, PEEK carbon fiber, Titanium cans

Ceramic and PEEK carbon fiber cans

d 11

f7

k2

h6

d 10

l2

d7

h6

d5

d6

H7

d3

k3

f7

k1

DN

d2

Static break-away torque (Nm)

DN
60
No. of poles
8
Material
MA3
2 6.5
Magnet 4 14.5
length 6 22
in cm
8
10

MA8
9
20
31

75
10
MA3
9
21
34

MA8
13
29
48

110
16
MA3
24
53
85

135
20
MA3

MA8
33
74
119

c
4
4
4
5
e
8
11
11
12

165
24
MA3

MA8

MA8

85
128
176

119
180
247

115
185
260
330

160
259
364
462

m
13
13
14
16

k1
100
133
158
192

s1
9
9
9
11

Outer rotor
d10
d11
90
110
125
145
150
170
178
198

V
0
4
4
5

W
5
5
5
8

k2
100
135
160
188

l1
103
128.5
138.5
169.5

l2
29
20
20
30

h
7
8
8
10

k3
55
87
87
103

l
16
22
22
32

t
18
35
35
46

u
5
10
10
12

Static break-away torque (Nm) at room temperature.

Magnet material: MA3 = SmCo, MA8 = NdFeB

Dimensions in mm
DN
75
110
135
165

LK
2-6
2-6
4-8
4-10

L
119
146
156
187

DN
75
110
135
165

DNL
22
43
43
55

d3
44
75
75
92

Can
a
DN
d2
75
118
17
110
153
31
135
178
17
163.5 218
17
Bearing arrangement
d5
d6
b
16.5 15.8 21
32.5 31.5 26
32.5 31.5 26
40.5 39.5 27

d7
16
32
32
40

137

Magnetic couplings Couplings

S1

1.1 1.2

M6
4 x 90

MAK685
10

3.2

Features
Magnetic couplings (MAK) are a hermetic sealing solution
for pumps and agitators. Dangerous or precious media
remain isolated in the closed system circuit.

Advantages
Magnetic coupling for applications acc. to API 685
(similar to API 610)
Hermetically sealed
Single seal
No contact of torque transmitting elements
No maintenance necessary
Hastelloy can for high performance
High efficiency can optional
Product-lubricated sliding bearings included

Item Description
1 Coupling
1.1
Inner rotor
1.2
Outer rotor
2 Can
3
Bearing assembly
3.1
Radial journal bearing
3.2, 3.3 Axial journal bearing
3.4
Shaft sleeve
4
HSH Cap screw

Functional description
The power transmission occurs contact-free through
magnets from the drive shaft to the product-wetted output
shaft. Between the two rotating parts is the can wich is
bolted to the container.

Materials
Sliding faces: Silicon carbide SiC (Q1),
Carbon silicon inpregnated SiC-C-Si (Q3)
Carbon graphite resin impregnated (B)
Magnets: Samarium-Cobalt (MA3),
Neodymium-Iron-Boron (MA8)
Metal parts: CrNiMo steel 1.4571 (G), CrNiMo steel
1.4462 (G1), Hastelloy C-4 2.4610 (M)

Operating range (see note on page 1)

Shaft diameter: d =40mm (1.57")
Pressure: p = 40bar (580PSI)
Temperature: t = 40C+250C
(40F+482F) (SmCo),
+120C (+248F) (NdFeB)
Speed: n = 3,600 min-1
Chemical resistance: pH 014
Viscosity: 0.35,000 mPas (SiC)
Torque: 434 Nm
Solids: max. 0.1mm; max.5% by weight;
grain hardness max: 700HV

DN
75
110
135
165

LK
2-6
2-6
4-8
4-10

L
119
156
156
198.5

DN
75
110
135
165

DNL
22
43
43
55

d3
44
75
75
92

138

Can
a
DN
d2
75
118
17
110
168
31
135
188
17
163.5 218
17
Bearing arrangement
d5
d6
b
16.5 15.8 21
32.5 31.5 26
32.5 31.5 26
40.5 39.5 27

Oil and gas industry

Refining technology
Centrifugal pumps
Product variants
Different variants are available to meet specific
requirements:
High temperature variant
High pressure can
PEEK carbon fiber can

PEEK carbon fiber can

c
4
4
4
5

m
13
22
20
22

k1
100
133
158
192

s1
9
13.5
11
11

Outer rotor
d10
d11
90
110
125
145
150
170
178
198

V
0
4
4
5

W
5
5
5
8

k2
100
135
160
188

e
8
11
11
12

l1
103
128.5
138.5
169.5

l2
29
20
20
30

h
7
8
8
10

k3
55
87
87
103

l
16
22
22
32

t
18
35
35
46

u
5
10
10
12

d7
16
32
32
40

MAK685 EagleBurgmann
Recommended applications

Standards and approvals

API 685

Dimensions in mm

w
3.1 3.4 3.3
l1

6
2 x 180

d 11

f7

k2

h6

d7

l2

d 10

h6

d5

d6

H7

d3

k3

f7

DN

k1

d2

NMB
a

Item Description
1.1 Inner rotor
1.2 Outer rotor
1.3 Can

Functional description
The power transmission occurs contact-free through
magnets from the drive shaft to the product wetted output
shaft. Between the two rotating parts is the can wich is
bolted to the container.

Break-away torque (Nm)

Standards and approvals

API 685

l
m

10,5

k
1.3

Advantages
Magnetic coupling for applications acc. to API 685
(similar to API 610)
Hermetically sealed
No contact of torque transmitting elements
No maintenance necessary
High efficiency can (insulated rings and slotted outer
can) for lowest eddy current losses (approx. 2 % of
motor power)
Increased safety and energy savings compared to solid
Hastelloy cans
Sliding bearing optional

Materials
Magnets: Samarium cobalt (MA3),
Neodymium iron boron (MA8)
Metal parts: CrNiMo steel 1.4401/1.4436,
PTFE Polytetrafluoroethylene (T)

Features
The NMB series is used successful in many applications
worldwide. The can is made from PTFE-seal insulated
rings and a slotted outer can, which reduces EC-losses to
a minimum. They are designed for increased safety and
energy savings. Thus they can handle large motor torques,
high speed and high pressure.

Operating range (see note on page 1)

Pressure: p = 45bar (653 PSI)
Shaft diameter: d =40mm (1.57")
Pressure: p = 40bar (580PSI)
Temperature: t = 40C+250C
(40F+482F) (SmCo),
+120C (+248F) (NdFeB)
Torque: 181.879 Nm

h
g

1.1

1.2

Recommended applications
Chemical industry
NMB EagleBurgmann
Oil and gas industry
Refining technology
Pharmaceutical industry
Product variants
Food processing industry
Centrifugal pumps
Different variants are available to meet specific
Gear pumps
requirements:
Top drive mixers/agitators
Dry running roller bearing
Fans
High temperature variant
Blowers
High pressure can
Autoclaves
Samarium cobalt (SC2)
Static
Eddy current
break-away torque losses
at 20C
at 3,000 min-1

Version
16P-2R-45
16P-3R-45
16P-4R-45
16P-5R-45
16P-6R-45
16P-7R-45
16P-8R-45
22P-4R-40
22P-5R-40
22P-6R-40
22P-7R-40
22P-8R-40
22P-9R-40
22P-10R-40

Nm
114
204
291
370
451
544
628
460
604
748
875
1,028
1,205
1,348

Dimensions in mm

kW
0.60
1.10
1.60
2.10
2.60
3.10
3.60
1.70
2.33
2.97
3.60
4.24
4.87
5.50

Neodymium iron boron (ND2)

Static
Eddy current
break-away torque losses
at 20C
at 3,000 min-1
Nm
153
252
370
475
589
703
805
649
857
1,019
1,199
1,416
1,680
1,879

kW
0.78
1.43
2.08
2.73
3.38
4.03
4.68
2.60
3.37
4.13
4.90
5.67
6.44
7.20

16P-2R
16P-3R
16P-4R
16P-5R
16P-6R
16P-7R
16P-8R

a
226.1
253.3
278.7
305.9
331.3
358.5
400

b
200.1
229.1
254.9
280.7
306.5
332.3
358.1

c
174.7
203.7
229.5
255.3
281.1
306.9
332.7

d
160
187.1
212.5
239.7
265.1
292.3
317.7

e
88.9
116.1
141.5
168.7
194.1
221.2
246.6

f
156.6
156.6
156.6
156.6
156.6
156.6
156.6

g
184.9
184.9
184.9
184.9
184.9
184.9
184.9

h
217.5
217.5
217.5
217.5
217.5
217.5
217.5

j
250
250
250
250
250
250
250

k
192
192
192
192
192
192
192

l
205
205
205
205
205
205
205

22P-4R
22P-5R
22P-6R
22P-7R
22P-8R
22P-9R
22P-10R

316.6
339.4
365.2
395
420.1
445.9
470

269.3
295.1
320.9
349.9
375.7
401.6
427.4

363.3
262.1
287.9
316.9
342.7
368.5
394.3

219
246.2
271.6
298.8
324.2
351.3
376.7

141.5
168.7
194.1
221.2
246.6
273.8
299.2

205.8
205.8
205.8
205.8
205.8
205.8
205.8

235.7
235.7
235.7
235.7
235.7
235.7
235.7

276.5
276.5
276.5
276.5
276.5
276.5
276.5

310
310
310
310
310
310
310

243
243
243
243
243
243
243

254
254
254
254
254
254
254

139

Magnetic couplings Couplings

SMAK
3

4
5

1.2
1.1
2

Features
Magnetic couplings of the SMAK series are used to transfer
torque into mixers and agitators. Top drive, bottom drive or
lateral drive. Dangerous or precious media remain isolated
in the closed vessel.
Advantages
Magnetic coupling for mixers and agitators
Hermetically sealed
Sterile design
Surfaces in contact with the medium are electro-polished
No contamination by buffer media
No contact of torque transmitting elements
No maintenance necessary
Sliding bearing for bottom drives included
Speed monitoring optional
Weld-in or screw-in flanges available
Functional description
The power transmission occurs contact-free through
magnets from the drive shaft to the product wetted output
shaft. Between the two rotating parts is the can wich is
bolted to the container.
Operating range (see note on page 1)
Shaft diameter: d =40mm (1.57")
Pressure: vacuum7bar
Temperature: t = 40C+150C
(40F+302F) (SmCo),
+120C (+248F) (NdFeB)
Speed: n = 400 min-1
Chemical resistance: pH 014
Viscosity: 0.35,000 mPas (SiC)
Torque: max. 270 Nm (bottom drive),
330 Nm (top drive)
Solids: max. 0.1 mm; max. 5 % by weight;
grain hardness max: 700 HV
Materials
Sliding faces: Silicon carbide SiC (Q1)
Magnets: Samarium cobalt (MA3),
Neodymium iron boron (MA8)
Metal parts: CrNiMo steel 1.4571 (G), 1.4435
Dimensions
Dimensions on request

140

Item Description
1.1 Inner rotor
1.2 Outer rotor
2 Can
3 Nut
4
Bearing bushing
5, 6 O-Ring
7
Set screw

Product variant
SMAK for top drive

SMAK EagleBurgmann

Standards and approvals

Material approvals: QHD, GMP, FDA
Recommended applications
Chemical industry
Pharmaceutical industry
Food processing industry
Agitators
Mixers

1.1

3
4
1.2
5

Item Description
SMAK EagleBurgmann
1.1 Inner rotor
1.2 Outer rotor
2
Motor connection
3 Can
4, 5 Bearing
6
Agitator blade connection

Magnetic couplings Bearings

LMF1
b

h6

d7

h6

d5

l2

5
d6

H7

d3

S3

k3

l1

Features
Sliding bearings are used for the shaft end in magnetic
coupled centrifugal or displacement pumps. The sliding
parts are made of SiC. The pump liquid is circulating
between the rotating and static parts to ensure
lubrication and cooling. EagleBurgmann LMF bearings
are successfully used for many years in applications
worldwide. They are almost wearless and therefore
extremely durable.
Advantages
Sliding bearing for the shaft of an impeller in a pump
Self lubrication through pump liquid
Adapted to MAK66 magnetic couplings

Item
1
2
3
4

Description
Radial journal bearing
Axial journal bearing
Axial journal bearing
Shaft sleeve

Recommended applications
Chemical industry
Oil and gas industry
Refining technology
Pharmaceutical industry
Food processing industry
Centrifugal pumps
Gear pumps

LMF1 EagleBurgmann

Materials
Sliding faces: Silicon carbide SiC (Q1),
Carbon silicon impregnated SiC-C-Si (Q3),
Carbon graphite resin impregnated (B)
Metal parts: CrNiMo steel 1.4462 (G1)

Product variants
Variants for low (110C (230F)) and high
temperature ( +400C (752F)) and variants with
heatable or coolable chamber available.

Functional description
The shaft end es connected to the shaft sleeve and two
bearing rings for the axial bearing forces. It is running
against the stationary bearing bushings.

LMF10
Bearing for demanding application conditions. Axial journal
bearing not shrunk but inserted.
Materials as for LMF1, optionally shaft sleeve made of
1.4462 with chromium dioxide coating.
Dimensions see table.

Operating range (see note on page 1)

Viscosity: 0.35,000 mPas (SiC)
Speed: n = 3,600 min-1
Solids: max. 0.1 mm; max. 5 % by weight;
grain hardness max: 700 HV

h
7.0
8.0
8.0
10.0
13.5

k3
55
87
87
103
130

n3
5
5
5
5
5

s3
5.5
6.6
6.6
6.6
9.0

d7
16
32
32
40
50

d6
31.5
39.5
39.5
49.5
49.5

b
26.0
27.0
30.0
34.5
43.5

e
12
12
12
15
15

l1
139.3
170.3
184.3
188.5
264.5

l2
20
30
12
14
14

h
8.0
10.0
20.0
13.5
28.5

k3
87
103
107
130
150

n3
5
5
5
5
6

s3
6.6
6.6
6.6
9.0
11.0

d7
32
40
40
50
50

l
16
22
22
32

u
5
10
10
12

h6

l2
29
20
20
30
14

l1
87.0
129.3
139.3
170.3
188.5

d7

e
8
11
11
12
15

d6

b
21.0
26.0
26.0
27.0
34.5

h6

d6
15.8
31.5
31.5
39.5
49.5

H7

d5
16.5
32.5
32.5
40.5
50.5

d5

d3
44
75
75
92
115

d3

LMF1-22/54-00
LMF1-43/80-00
LMF1-43/90-00
LMF1-55/110-00
LMF1-65/188-00

k3

LMF1 - Dimensions in mm

LMF10-43/90-00
LMF10-55/110-00
LMF10-55/144-00
LMF10-65/188-00
LMF10-65/264-00

d3
75
92
92
115
115

d5
32.5
40.5
40.5
50.5
50.5

s3

LMF10 - Dimensions in mm
l1

LMF10 EagleBurgmann

141

Additional EagleBurgmann product lines

Seal supply systems

Carbon floating ring seals

Depending on the design, application and mode of operation, supply systems are
required to flush, cool and pressurize mechanical seals and magnetic couplings and
provide leakage compensation. EagleBurgmann supplies a complete range of solutions
from a single source including design, production, commissioning and service. The
portfolio includes a complete range of API compliant supply systems.

Carbon floating ring seals are supplied as maintenance-free compact labyrinth cartridge
seals with low leakage. The floating self-adjusting sealing rings provide radial sealing on
the shaft with a very small gap. The seal requires no additional lubrication, and it is
designed for dry running. Besides pure gas, carbon floating ring seals are also suitable
for Atex applications, toxic media, media containing solids, flue gas, dust, powder, vapor,
liquid mist, oil mist and penetrating oil.

Quench systems
Versions with polyethylene or stainless steel tanks
API 682 versions
Circulation of buffer fluid possible
Thermosiphon systems
Comprehensive modularized product range
Sterilizable versions
API 682 versions for Plan 52 and 53A
Heat exchangers
Comprehensive standard range
Extremely efficient cooling
Compact design
API 682 versions
SPO (SPB/SPC) closed-circuit barrier fluid systems
Suitable for applications with high pressure
No connection to nitrogen supply necessary
API 682 versions
SPA open-circuit buffer/barrier fluid systems
High cooling capacity
Combined supply of various seals
SPN refill units
Manual, automatic and mobile versions
Gas supply systems
Customized versions for all types and requirements in gas-lubricated mechanical seal
applications
Seal management system
API 682 / 614
RoTechBooster
Ensures seal gas flow to the gas seal when the differential pressure across
acompressor is insufficient to provide adequate flow.

Typical applications:
Liquid and gas lubricated mechanical seals, magnetic couplings

For detailed information please inquire.

142

Espey WD series (split housing)

Split housing and seal rings allow easy installation
Pressure: vacuum 20 bar ( 290 PSI)
Shaft diameter: 40 340 mm (1.57" 13.39")
Radial clearance: max. 5.0 mm (0.2")
Axial movement: theoretically unlimited
Temperature: 120C +800 C (184F +1,472 F)
Sliding velocity: 40 150 m/s (131 492 ft/s)
Espey WDK-BHS for bulkhead shaft penetrations
Split housing and seal rings allow easy installation
Verified leakage rates
International type approvals
Pressure: max. 3 bar (44 PSI)
Shaft diameter: 40 800 mm (1.57" 31.5")
Radial play: max. 5 mm (0.2")
Axial movement: theoretically unlimited
Temperature: max. 225 C (437 F)
Sliding velocity: 40 m/s (131 ft/s)
Special Espey WD series variants
Seals for top driven agitators and DIN seal chambers
Blast furnace seals, shaft 4,000 mm ( 157.48")
Seals for mills and centrifuge feed heads
Espey WKA series
Chamber seal (modular design can be combined in any order), optional with
housing and lid
Pressure: vacuum 250 bar ( 3,626 PSI)
Shaft diameter: 20 340 mm (0.79" 13.39")
Radial play: max. 2.0 mm (0.08")
Axial movement: theoretically unlimited
Temperature: 120C +500 C (184F +932 F)
Sliding velocity: 150 240 m/s (492 787 ft/s),
depending on type
Espey shaft sleeves
Metallic or ceramic coating
One-piece or split design
Shaft diameter: 45 340 mm (1.77" 13.39")
Temperature: +1,000 C (+1,832 F)

Typical applications:
Blowers, compressors, turbines, centrifuges, mills, agitators, dryers, bulkheads, steam
turbines, throttle/control valves, gear units, motors

Additional EagleBurgmann product lines

Compression packings

Gaskets

A cost effective and reliable method for sealing pump shafts, valve spindles and rotating
shafts in process equipment. Manufactured from a range of material combinations
traditional and innovative using state-of-the-art production techniques. Supplied in
boxed lengths or pre-cut rings. Approvals/certification includes BAM, DVGW, FDA, API,
ISO, TA-Luft. Fire-safe, low leakage, low emission and nuclear grades are available with
full documentation and certification.

Fibre gasket sheets

Burasil-Basic, -Universal and Buratherm N gasket
sheets for service in low to medium pressure and temperature applications for process
equipment and pipework in industry and for utility applications like gas and water supply.
Approvals/certification includes: DVGW, KTW, HTB, WRAS, WRC, TA-Luft, BAM (Oxygen
max. = 120 C/130 bar)

Rotatherm graphite rings

An accepted industry-standard for valves and pumps in high pressure and high
temperature service. Manufactured as moulded rings (with and without steel
reinforcement) or special seals. Suits all industry applications including the power and
nuclear industries. Approvals/certification includes: BAM, DVGW,
API, ISO, TA-Luft.

PTFE gasket sheets and tapes

Burachem is a highly chemical resistant modified PTFE gasket material range offering
varying properties of mechanical strength and chemical resistance depending upon
application. Approvals/certification includes: DVGW, KTW, HTB, WRAS, WRC, BAM
(Oxygen max. =120 C/130 bar), TA-Luft.
Quick-Seal MultiTex tape is the latest development in the field of expanded PTFE
sealing materials for in-place sealing
of vessel and pipe flanges.

BuraTAL Fugitive emission products

A comprehensive range of low leakage packing sets
manufactured in graphite or our unique non-woven materials. All current fugitive
emission standards are met with outstanding performance, low friction, ease of
installation, and a long service life. Approvals/certification includes: API 622, ISO
15848, TA-Luft.
Burajet Injectable packings
The Burajet Injectable packing system offers a wide range of injectable compounds for
pumps, valves, and process equipment. An ideal product for the mining and paper &
pulp industries. Approvals/Certification includes: FDA
Buraglas Glass packings
Manufactured from non-ceramic materials and fibres, BuraGlas packings are suitable for
sealing of vessels, coal mills, industrial furnaces, oven doors, hatches and covers.
Produced in lengths in sizes up to 150 mm section. Approvals/Certification:
Hydrolytische Klasse 1; DIN 12111.
Packing cartridges
Packing cartridges combine quick and easy installation with robust simple construction
to provide minimum downtime and maximum reliability in critical process applications.
Manufactured to individual requirements to fit into DIN/ASME standard equipment e.g.
agitators. Cartridges can be supplied with live-loading and additional bellows
containment for maximum environmental safety.

Typical applications:
Pumps, agitators, mixers, kneaders, dryers, fans, blowers, filters, refiners, pulpers,
mills, valves

Graphite seals and tapes

Statotherm Graphite gasket sheets, tapes
Soft, flexible, graphite gasket sheets ideal for pump, valve, and equipment gaskets.
Statotherm R Profile rings for static sealing in high
temperature applications, e.g. in heat exchangers, valves or pumps.
Statotherm V and V-Flex cover seals are used as
self-sealing gaskets in high-pressure valves e.g. for power plants at high temperatures.
Statotherm V-Flex is supplied
by the meter.
Metal gaskets
Approvals/certification include BAM, DVGW, TA-Luft
Spiraltherm spiral wound gaskets. Available to suit all international flange
standards and in a wide choice of materials.
Corratherm corrugated gaskets are for heavy duty applications.
Kammprofile serrated gaskets are for applications with high demands for operating
safety and tightness.
Buralloy metal jacketed gaskets are produced in a wide variety of different
materials (in various combinations), in many styles for heat exchangers, pipe flanges,
boilers, and process equipment.
Buralloy ring type joints are available to suit all ASME
and DIN flanges from stock. Sizes: 15 900 mm (0.5" 36"); manufactured to
ASME B16.20 and to API 6A.

Typical applications:
Stationary machine parts, flanges, flange-like joints, bulkheads

For detailed information please inquire.

143

Additional EagleBurgmann product lines

Expansion joints

Special products

Expansion joints are vital components in most industrial plants. They are installed as
flexible connections in pipe and duct systems to take up or compensate for thermal
expansion, vibration and misalignments. Advancements in processing and generating
technologies are being combined with high demands for efficiency. This, along with a
clear orientation towards environmental protection, puts high demands on expansion
joint designs.

For particular applications, innovative, customized solutions are

the only answer. The supplier must have a wealth of in-depth expertise, many years of
experience and above all the willingness and ability to translate ideas into solutions that
work in practical application.

Customized expansion joints made of fabric or metal are the solution of choice.
Fabric expansion joints
Single and multilayer designs
Dimensions: according to customer specifications
Temperature -35 C +1,000 C (-31 F + 1,832 F)
(higher temperature, on request)
Pressure: +/-0.35 bar
Versions with wiremesh reinforcement
Versions with high chemical resistance
Versions with Nekal-tight design
Fabric expansion joint are available as units, including bolster and steel parts.
Metal expansion joints
Dimensions: Circular: DN40 and up.
Rectangular: According to customer specifications
Temperature: 198 C ... +1,371 C (324 F + 2,500 F)
Pressure: vacuum 172 bar ( 2,500 PSI)
Materials: stainless steel, Incoloy Inconel, Hastelloy, titanium, special materials
Single and universal designs
Metal expansion joints are available with for example tie rods, hinges, gimbals,
refractory lining, elbow, pantograph.
Dimensions and pressure range depends on design, material selection, type of
expansion joint and duct insulation.

Contoured diaphragm couplings

For demanding rotating equipment such as turbines and
compressors in the oil and gas industries as well as
petrochemicals, conventional and nuclear power generation, marine applications and the
aerospace industry.
They are lightweight, easy to install and maintain, and demonstrate high reliability in
stress analysis. Low bearing load, best dynamic balance repeatability and no fretting or
wearing are advantages of the coupling. Uniquely shaped flexible elements in the metal
diaphragms located at each end of the spacers attain optimum performance. Additional
features:
Couplings acc. to API 671/ISO10441 or API 610/ISO13709
Multi diaphragms, compensation for large misalignments
Low (reduced) moment
Electrically insulatet
Spark resistant materials
Tuned for rotor dynamics
Torque overload releasing device
Torque measuring system
Operating range: Max. torque: 2,700 kNm,
max. speed: 100,000 min-1
High-grade metal bellows
for specialized applications in the nuclear power, semi conductor and medical
equipment industries, etc.
Dynamic and static sealing elements
for the aerospace industry which meet extremely demanding quality requirements.
Stern tube and marine seals
with various approvals and certifications, for marine outfitters and users.
Rotary kiln sealing systems
as single and double seals in drying, calcination, combustion and pyrolysis applications.

Typical applications:
Air and flue gas ducts, pipelines, sewer systems

144

Typical applications:
Engineered solutions designed to meet customer requirements

Table of materials
Material code
Description
1)EN 12756 EagleBurgmann
Face materials (Item 1/2)
Synthetic carbons
Carbon graphite antimony
Buko 03
uA
impregnated
Carbon graphite resin impregnated,
Buko 1
uB
approved for foodstuffs
B3
Buko 02
Carbon graphite resin impregnated
B5
Buko 34
Carbon, resin bonded
Electrographite antimony
C
Buko 22
impregnated
Metals
Bume 20
Cr steel
uE
G
Bume 17
CrNiMo steel
Bume 5
Special cast CrMo steel
uS
T41
Bube 281
1.4462 DLC-coated
Carbides
U = Tungsten carbides
Buka 1 brazed Tungsten carbide, Co-binder
u U1
Buka 16 solid Tungsten carbide, Ni-binder
u U2
Buka 16
Tungsten carbide, Ni-binder
u U22
shrunk-in
U3
Buka 15 solid Tungsten carbide, NiCrMo-binder
Buka 15
U37
Tungsten carbide, NiCrMo-binder
shrunk-in
U7
Buka 17 solid Tungsten carbide, binder-free
Q = Silicon carbides
silicon carbide, sintered
Buka 22 solid SiC,
u Q1
pressureless
Buka 22
SiC, sintered pressureless
u Q12
shrunk-in
Buka 20 solid SiC-Si, reaction bonded
u Q2
Buka 20
SiC-Si, reaction bonded
u Q22
shrunk-in
Q3
Buka 30 solid SiC-C-Si, carbon silicon impr.
Buka 30
Q32
SiC-C-Si, carbon silicon impr.
shrunk-in
SiC sintered pressureless
Q6
Buka 32 solid SiC-C,
with carbon
Q4
Buka 24 solid C-SiC, carbon surface silicated
Q19
Buka 221
SiC, DLC-coated
Q15
Buka 225
SiC, DiamondFace
Metal oxides (Ceramics)
V
Buke 5
Al-Oxide > 99 %
V2
Buke 3
Al-Oxide > 96 %
X
Buke 8
Steatite (Magnesia silicate)
Plastics
Buku 2
PTFE glassfibre reinforced
u Y1
Y2
Buku 3
PTFE carbon reinforced

Material code
Description
1)EN 12756 EagleBurgmann
Secondary seal components (Item 3)
Elastomers, not wrapped
B
B
Butyl rubber (IIR2))
Ethylene
propylene rubber
E
uE
(EPDM2)) e.g. Nordel
Perfluorocarbon rubber (FFKM2))
K
K
e.g. Kalrez, Chemraz, Simriz
Chloroprene
rubber (CR2)
N
N
e.g. Neopren
Nitrile-butadiene-rubber (NBR2))
P
uP
e.g. Perbunan
Silicone rubber (VMQ2))
S
S
e.g. Silopren
Fluorocarbon rubber (FKM2))
V
uV
e.g. Viton
Hydrogenated
Nitrile-rubber
X
X4
(HNBR2))
Tetrafluoroethylene propylene
X
X5
rubber (FEPM2))
e.g. Aflas, Fluoraz
Elastomers, wrapped
TTV
FKM, double PTFE wrapped
u M1
TTE
EPDM, double PTFE wrapped
u M2
M3
TTS
VMQ, double PTFE wrapped
M4
TTN
CR, double PTFE wrapped
M5
FEP
FKM, FEP wrapped
FKM double PTFE wrapped/
M7
TTV/T
PTFE solid
Differing materials
U1
K/T
Perfluorocarbon rubber/PTFE
Non-Elastomers
G
Statotherm
Pure graphite
T
T
PTFE (Polytetrafluoroethylene)
T2
T2
PTFE glass fiber reinforced
T3
T3
PTFE carbon reinforced
T12
T12
PTFE carbon-graphite reinforced
Y1
Burasil-U
Plastic fiber/Aramid

Material code
Description
1)EN 12756 EagleBurgmann
Spring and construction materials (Item 4/5)
Spring materials
1.4571
CrNiMo steel
uG
Hastelloy C-4
2.4610
uM
Nickel-base alloy
Construction materials
D
St
C steel
1.4122
Cr steel
uE
F
1.4301
CrNi steel
F
1.4308
CrNi cast steel
F1
1.4313
Special cast CrNi steel
1.4401
CrNiMo steel
uG
1.4404
CrNiMo steel
uG
1.4571
CrNiMo steel
uG
G
1.4581
CrNiMo cast steel
1.4462
CrNiMo steel Duplex
u G1
G2
1.4439
CrNiMo steel
G3
1.4539
NiCrMo steel
UNSS32760-Nor CrNiMoCu steel - Superduplex
u G4
M = Nickel-base alloy
2.4610
Hastelloy C-4
uM
M1
2.4617
Hastelloy B-2
M3
2.4660
Carpenter 20 Cb3
M4
2.4375
Monel alloy K500
M5
2.4819
Hastelloy C-276
M6
2.4668
Inconel 718
T = Other materials
T1
1.4505
CrNiMoCuNb steel
T2
3.7035
Pure titanium
T3
2.4856
Inconel 625
T4
1.3917
Carpenter 42
T5
1.4876
Incoloy 800
Preferred materials
1) Standard following EN 12756, Dec. 2000
2) Abbreviations acc. to ISO 1629, Nov. 2004

Color code
Shaft

Stationary seal parts

Rotary seal parts

Housing, installation chamber

Stationary seal faces

Rotating seal faces

Elastomers

TotalSealCare Service

TotalSealCare service modules

1 5
2 6
3 7
4

The modular seal service offered through

TotalSealCare is as individual as are the demands
of our customers. The range of services spans
complete maintenance of all installed seals, through
to stock management, as well as engineering,
training and electronic data documentation.
Our TotalSealCare services consist of individual
modules from which we assemble individualized
service packages.

You can benefit from our many years of experience

and expertise in all areas of seal technology, and our
major store of practical knowledge.

Consulting & engineering

Seminars & training

After establishing and analyzing all of the seals in

a system, we work out standardization concepts
based on the as-is status. The results we are
hoping for are to reduce the number of seal types,
sizes and materials used, and to improve the key
figures of the system. We advise you relating to
codes of practice and statutory regulations, and
indicate what actions need to be taken.

We offer an extensive range of continuing

education programs in seal technology.
For service and maintenance personnel, skilled
staff and engineers from various branches of
industry such as refining, chemicals, power
generation, foodstuffs, paper and pharmaceuticals.
Our range includes group seminars, individual
training and seminars specifically tailored to your
requirements. At our premises or at a location of
your choice.

Maintenance

In the plant or in the service center, qualified

fitters and technicians look after all the aspects of
seal maintenance: installation, startup, servicing,
conversion, overhaul and repair. We record and
document functionally relevant data (fault causes,
measures for repair, costs). This means it is
possible to assess seal operating times and
maintenance costs on a continuous basis, thereby
defining measures for extending service intervals.

On-site service

Our on-site service includes the components of

anoverhaul service, conversions and service
container. We deploy a service unit directly on
your premises: equipped with the basic suite of
seals or a stock of seals discussed with you in
advance, and staffed by qualified personnel.
On-site, our work includes producing the necessary
gaskets, ensuring that the documentation is
complete and advising our customers on selecting
and installing seals. Our range of services is
rounded off by complete conversions (e.g. acc.
toTA-Luft).

Inventory management

Based on your individual requirements and the

applicable quality regulations, we develop
aconcept for inventory management of complete
seals and spare parts. Furthermore, we optimize
stocking on site or in the EagleBurgmann service
center. In this way, you can reduce your
administration overhead and concentrate on
yourkey operations.

Technical analysis & support

A team of seal specialists is responsible for
rectifying process malfunctions or bad actors.
The latest methods such as thermography or data
logging are used for diagnosing positions that are
critical for the operation of the system and for
working out measures to rectify them. In our
research and development centers, we perform
realistic tests on test rigs or in original pumps.
The objective is to extend the MTBF and to
increase system serviceability by individual and
constructive solutions.

Service agreements
We offer our customers specific agreements
thatcan be combined from the six service
modules. Whether for individual seal systems,
critical process elements, specific system areas
or an extensive seal service for complete plants:
the modular structure of our service makes it
possible to satisfy individual requirements.
With our tried-and-tested monitoring instrument,
SEPRO, we can also record all data relevant for
the seals for documentation and evaluation
purposes.

DMS_MSE / E6 / 5.000 / 11.16 / 9.7.1 EagleBurgmann Group Marketing, Germany

Algeria Angola Argentina Australia Austria Azerbaijan Bahrain Bangladesh Belarus Belgium Botswana Brazil Bulgaria Cameroon Canada
Chile China Colombia Congo Cyprus Czech Republic Denmark Ecuador Egypt Estonia Finland France Gabon Germany Ghana Great Britain
Greece Hungary India Indonesia Iraq Ireland Israel Italy Ivory Coast Japan Jordan Kazakhstan Kenya Korea Kuwait Latvia Lebanon Libya
Lithuania Madagascar Malaysia Mauritius Mexico Morocco Myanmar Namibia Netherlands New Zealand Nigeria Norway Oman Pakistan
Paraguay Peru Philippines Poland Qatar Romania Russia Saudi Arabia Serbia Singapore Slovak Republic Slovenia South Africa Spain Sudan
Sweden Switzerland Taiwan Thailand Trinidad and Tobago Tunisia Turkey Ukraine United Arab Emirates Uruguay USA Venezuela Vietnam
Yemen Zambia Zimbabwe www.eagleburgmann.com/world

EagleBurgmann, a joint venture of the German Freudenberg Group and the Japanese Eagle Industry
Group, is one of the internationally leading companies for industrial sealing technology. Our products
are used everywhere where safety and reliability are important: in the oil and gas industry, refining
technology, the petrochemical, chemical and pharmaceutical industries, food processing, power, water,
mining, pulp & paper, aerospace and many other spheres. Every day, more than 6,000 employees in
more than 60 subsidiaries contribute their ideas, solutions and commitment towards ensuring that
customers all over the world can rely on our seals. Our modular TotalSealCare service underlines our
strong customer orientation and off ers tailor-made services for every application.

eagleburgmann.com
[email protected]