Scribd
Upload
74 views2 pages

Cadd Centre, Anna Nagar: PDMS Commands

The document lists PDMS commands for modeling piping and equipment. It includes commands for checking attributes of piping components like axes, bore size, material; creating new components like elbows, tees, flanges; connecting piping runs; setting orientations; and modeling equipment by creating sites, zones, equipment, sub-equipment, nozzles, cylinders, and boxes. It also includes commands for marking nozzles, copying equipment, and connecting design points.

Uploaded by

bsiva123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views2 pages

Cadd Centre, Anna Nagar: PDMS Commands

The document lists PDMS commands for modeling piping and equipment. It includes commands for checking attributes of piping components like axes, bore size, material; creating new components like elbows, tees, flanges; connecting piping runs; setting orientations; and modeling equipment by creating sites, zones, equipment, sub-equipment, nozzles, cylinders, and boxes. It also includes commands for marking nozzles, copying equipment, and connecting design points.

Uploaded by

bsiva123
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PDMS Commands

CADD CENTRE, ANNA NAGAR


Axes at CE= to check the axes of component
like North, South, East, West direction
Q axes at ph= to check the head of the branch
of the pipe.
Q axes at pt= to check the tail of the branch of
the pipe.
Q Hstu= to show the branch head tube attribute
Q Lstu= to show the branch tail tube attribute
Q Hbore= to check the arrive bore or diameter
of the component
Q Tbore= to check the leave bore or diameter
of the component
Q Spre= to check the specification of the
particular component
Q pspec= to check material class of the pipe.
New elbow choo all= to create new elbow
through command line
New tee choo all= to create new tee through
command line
New gasket choo all= to create new gasket
through command line
New flange choo all= to create new flange
through command line
New olet choo all= to create new olet through
command line
Unclaim all= to remove claim the by user so
other user can work in that pipe, equipment,
member,structure.
Getwork= to refresh the design model. After get
work all the change done any user will show in
the model.
Axes at hpos= To check the branch head axes
Axes at tpos= To check the branch tail axes
Q ltle= to check the length of the spool between
the two component
Conn ph to fir member= to connect the branch
head to first member of the next branch by
common line
Conn pt to fir member= to connect the branch
tail to last member of the next branch by common
line
Q ori = to check the orientation of the
component
Dist= to give the distance between two
component
Clea= to give the spool length between the two
component
Conn= connect to the member
Fconn= to component forcefully
Q styp= to check the component selection type
Q dtxr= to check the detail text description of
the component

Q mtxx= to check the material of the


component

Q mode= to check the mode weather it in


forward mode or backward mode
Q para= to check the parameter of the
component
Dir tow next= to connect the next member by
direction
Q ref= to check the reference
Add all the pipe within vol ce 500= all pipes to
added in the area 500 around the selected
component.
Incl= to include the component from one branch
to other branch
Ori and p3 is up= to orientate the point 3 of the
tee in up direction
Own= navigate the owner of component
Q angle= to check the angle of the component
Q atle= to check the length of the first tube of
the branch
Attype ccnn= comment attachment without
dimensions

Attype cccc= comment attachment with


dimensions
Attype xxxx= to set the attachment for isometric
break up
Ch ce= to check the data inconsistency
Dir tow next elb= to align the elbow with next
elbow
Dir tow id@= to align the elbow by using mouse
click on the component
Q hcon= to check head connection attached
with which branch
Q tcon= to check tail connection attached with
which branch
Q ispec= to check the insulation of pipe
Ispec nulref= to remove the insulation of the
pipe
Mtoc dotd= to appear the component in doted
in the isometric
Mtoc off= to remove the material off the
component. With this command
material of the component will not appear in
isometric
Nex conn= connect to next component
Nex thro ce= align the next component in same
direction
Q p3 = to check the p3 point of the component
Q pa= to check arrive point
Q pl= to check the leave point
Attype flow= to create the flow direction
attachment.

PDMS Commands
CADD CENTRE, ANNA NAGAR

Equipment Modeling
New site= for creating the new site in pdms
New zone= for creating the new zone in pdms
New equi= for creating the new equipment in
pdms
New sube= for creating the new sub equipment
in pdms
New nozzle= for creating the new nozzle in the
pdms
New box= for creating new box in the pdms
New cylinder= for creating new cylinder in the
pdms
Conn idp to idp= to connect design point of two
cylinder/box etc.
Mark with (nam) all nozz for ce= to mark the all
nozzle of equipment with name in pdms
Q level= to check the level of the component
Axes at p1= to check p1 point of the primitive
Axes at p2= to check p2 point of the primitive
New cylinder copy prev by n 500= to copy the
previous cylinder by north direction by 500

You might also like