https://www.phoenixcontact.

com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

Analog/digital I/O extension module with 2 digital inputs/outputs (0...250 V AC/DC) and 1 analog input
(0/4...20 mA) and output (0/4 ... 20 mA, 0...10 V), with screw connection, incl. DIN rail connector

Why buy this product

Channel-to-channel electrical isolation
Extended temperature range, -40 C ... +70 C
Easy module replacement even during operation (hot swap)
Digital wide-range inputs/outputs (0 ...250 VAC/DC)
Suitable for ATEXzone 2
Easy startup via thumbwheel

Key Commercial Data

Packing unit 1 STK

GTIN

GTIN 4046356610216
Weight per Piece (excluding packing) 200.000 g
Custom tariff number 85389091
Country of origin Germany

Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area

Dimensions
Width 17.5 mm
Height 99 mm
Depth 114.5 mm

03/13/2017Page1/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Technical data
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 C ... 70 C (>55Cderating)
-40 F ... 158 F (>131F derating)
Ambient temperature (storage/transport) -40 C ... 85 C
-40 F ... 185 F
Permissible humidity (operation) 20 % ... 85 %
Permissible humidity (storage/transport) 20 % ... 85 %
Altitude 2000 m
Vibration (operation) in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Shock 16g, 11 ms

General
Overvoltage category II
Mounting position any
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Degree of pollution 2
Housing material PA 6.6-FR
Flammability rating according to UL 94 V0
889 Years (Telcordia standard, 25C temperature, 21% operating cycle
MTTF
(5 days a week, 8 hours a day))
391 Years (Telcordia standard, 40C temperature, 34.25% operating
cycle (5 days a week, 12 hours a day))
151 Years (Telcordia standard, temperature 40 C, operating cycle 100
% (7 days a week, 24 hours a day))

Supply
Supply voltage range 19.2 V DC ... 30.5 V DC (DIN rail connector)
Max. current consumption 95 mA (At 24 V DC, at 25C)
Transient surge protection Yes

Analog inputs
Number of inputs 1
Current input signal 0 mA ... 20 mA (can be set via DIP switches)
4 mA ... 20 mA (can be set via DIP switches)
Max. current input signal 22 mA
Input resistance current input < 70
Precision 0.02 % (at 25 C)
Temperature coefficient, typical typ. 0.0025 %/K (at -40 C ... +70 C)
Supply voltage 12 V DC (For passive sensors (via terminal PWR1, +I1))
Resolution 16 bit
Protective circuit Short-circuit and overload protection

Digital inputs
Description of the input Digital input

03/13/2017Page2/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Technical data
Digital inputs
Number of inputs 2
Switching level "1" signal 10 V AC/DC ... 50 V AC/DC (Low-voltage input)
50 V AC/DC ... 250 V AC/DC (High-voltage input)
Switching level "0" signal 0 V AC/DC ... 4 V AC/DC (Low-voltage input)
0 V AC/DC ... 20 V AC/DC (High-voltage input)
Input frequency 2 Hz

Analog outputs
Number of outputs 1
Voltage output signal 0 V ... 10 V
Max. voltage output signal approx. 10.83 V
Load 10 k
Precision typ. 0.5 % (Voltage output)
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
Max. current output signal approx. 21.67 mA
Load 500
Precision 0.02 % (at 25 C)
Resolution 16 bit
Temperature coefficient, typical typ. 0.0025 %/K (at -40 C ... +70 C)
Behavior of the outputs (adjustable via DIP switch) Hold / Reset
Protective circuit Transient protection of outputs

Digital outputs
Number of outputs 2
Contact type PDT
Contact material AgSnO2
Maximum switching voltage 250 V AC
24 V DC
Min. switching current 10 mA
Max. switching current 2A
Mechanical service life 7
1 x 10 cycles
Electrical service life 5
2 x 10 cycles (At 2 A, 250 VAC, cos 0.4)
5
2 x 10 cycles (At 1 A, 24 V DC, L/R = 48 ms)
Maximum switching frequency 2 Hz
Switching capacity 48 W (24 V DC)
60 W (30 V DC)
20 W (48 VDC)
18 W (60 V DC)
22 W (110 V DC)
40 W (220 VDC)

03/13/2017Page3/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Technical data
Digital outputs
42 W (250 VDC)
Behavior of the outputs (adjustable via DIP switch) Hold / Reset

Electrical isolation
300 V (Rated insulation voltage (in each case between the digital
Digital I/O inputs // digital outputs //TBUS supply, reinforced insulation according to
EN61010))
50 V (Rated insulation voltage (in each case between the TBUS analog
Analog I/O inputs / analog outputs /supply, reinforced insulation according to
EN61010))
300 V (Rated insulation voltage (in each case between the digital inputs
Digital/analog I/O and outputs // analog inputs and outputs, reinforced insulation according
to EN61010))

Test voltage
Digital I/O 2.5 kV AC (50 Hz, 1 min.)
Analog I/O 1.5 kV AC (50 Hz, 1 min.)

Connection data
Connection method Screw connection
Conductor cross section solid min. 0.2 mm
Conductor cross section solid max. 2.5 mm
Conductor cross section flexible min. 0.2 mm
Conductor cross section flexible max. 2.5 mm
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 7 mm
Tightening torque 0.6 Nm
Screw thread M3

Status indicator
Status display Green LED (supply voltage, PWR)
Green LED (bus communication, DAT)
Red LED (periphery error, ERR)
Yellow LED (digital input, DI1)
Yellow LED (digital input, DI2)
Yellow LED (digital output, DO1)
Yellow LED (digital output, DO2)

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Standard designation EMC Directive 2014/30/EU
Standards/regulations EN61000-6-2
Standard designation EMC Directive 2014/30/EU
Standards/regulations EN 61000-6-4
Standard designation Ex Directive (ATEX)
03/13/2017Page4/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Technical data
Standards and Regulations
Standards/regulations EN60079-0
Standard designation Ex Directive (ATEX)
Standards/regulations EN-60079-15
Shock 16g, 11 ms
Flammability rating according to UL 94 V0
Vibration (operation) in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Conformance CE-compliant
ATEX II 3 G Ex nA nC IIC T4 Gc
IECEx Ex nA nC IIC T4 Gc
UL, USA/Canada UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T4A
Class I, Zone 2, IIC T4

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab Downloads,
Category Manufacturer's declaration

Approvals
Approvals

Approvals

UL Listed / cUL Listed / EAC / cULus Listed

Ex Approvals

IECEx / UL Listed / cUL Listed / ATEX / cULus Listed

Approval details

UL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705

cUL Listed
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705

03/13/2017Page5/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Approvals

EAC
EAC-Zulassung

cULus Listed

Accessories
Accessories
Communication module

Communication module-RAD-RS485-IFS-2702184

Multipoint multiplexer for RS-485 bus system, can be extended with I/O extension modules. Can be used as Modbus
RTU bus coupler or combined with Radioline wireless system, screw connection. Up to 99 stations, including DIN rail
connector

DIN rail connector

Electronic housing-ME 17,5 TBUS 1,5/ 5-ST-3,81 GN-2709561

DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.

Extension module

I/O extension module-RAD-DAIO6-IFS-2901533

Analog/digital I/O extension module with 2 digital inputs/outputs (0...250 V AC/DC) and 1 analog input (0/4...20 mA)
and output (0/4 ... 20 mA, 0...10 V), with screw connection, incl. DIN rail connector

Trusted Wireless device

03/13/2017Page6/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Accessories

Wireless module-RAD-2400-IFS-2901541

2400 MHz wireless transceiver with RS-232, RS-485 2-wire interface, expandable with I/O extension modules, with
screw connection, antenna connection:RSMA (female), including DIN rail connector, without antenna

Wireless module-RAD-868-IFS-2904909

868 MHz wireless transceiver with RS-232, RS-485 2-wire interface, expandable with I/O extension modules, with
screw connection, antenna connection:RSMA (female), including DIN rail connector, without antenna.

Wireless module-RAD-900-IFS-2901540

Bidirectional, Radioline 900 MHz transceiver for wireless transmission of serial and I/O data

Necessary add-on products

Wireless module-RAD-2400-IFS-2901541

2400 MHz wireless transceiver with RS-232, RS-485 2-wire interface, expandable with I/O extension modules, with
screw connection, antenna connection:RSMA (female), including DIN rail connector, without antenna

Wireless module-RAD-900-IFS-2901540

Bidirectional, Radioline 900 MHz transceiver for wireless transmission of serial and I/O data

03/13/2017Page7/8
https://www.phoenixcontact.com/sg/products/2901533

I/O extension module-RAD-DAIO6-IFS-2901533

Accessories

Wireless module-RAD-868-IFS-2904909

868 MHz wireless transceiver with RS-232, RS-485 2-wire interface, expandable with I/O extension modules, with
screw connection, antenna connection:RSMA (female), including DIN rail connector, without antenna.

Communication module-RAD-RS485-IFS-2702184

Multipoint multiplexer for RS-485 bus system, can be extended with I/O extension modules. Can be used as Modbus
RTU bus coupler or combined with Radioline wireless system, screw connection. Up to 99 stations, including DIN rail
connector

Additional products

I/O extension module-RAD-DAIO6-IFS-2901533

Analog/digital I/O extension module with 2 digital inputs/outputs (0...250 V AC/DC) and 1 analog input (0/4...20 mA)
and output (0/4 ... 20 mA, 0...10 V), with screw connection, incl. DIN rail connector

Phoenix Contact 2017 - all rights reserved

http://www.phoenixcontact.com

03/13/2017Page8/8