Standard Motor Catalogue IE 2 IE 3

L O L
AC LL
LL AG BE
BE 2-UB AS 2-UB

BC
AD
HE

BC M EF EB

EF EB EC

BA BA 4-K Holes
F C B
BB
E C B
BB AESV2W, AESU2W
AESV3W, AESU3W
TECO Group

Growth-Challenge-Unlimited Exploration

TECO, a famous globalize enterprise group, share the third in global industrial motor of the world; and it has
successfully diversified into a highly competitive development conglomerate with worldwide business operations including
heavy electrical, home appliance, electronics, IT system, telecommunications equipments, financial investment from
the motor giant enterprises. TECO Group currently has nearly hundred oversea affiliates and subsidiaries, and the total
global employee amount is over tens of thousands. It has a wide range technology cooperation with many world famous
enterprise, such as GE, Japan Yaskawas, the U.S. Westinghouse, Siemens of Germany, Japan, Hitachi, Mitsubishi and
so on, its business territory has been extended to Asia, America, Europe, Australia, and became known as a well-known
World Group, TECO had become an international brand.

TECO History

1956 Company foundation and start of production in the first TECO factory in San-Chung, Taiwan
1965 Production capacity increased by opening new factory in Shin-Chuan, Taiwan
1966 Start of close technical co-operation with Hitachi, Yaskawa and Taiyo.
1979 Further production capacity increase by opening a factory in Chung Li, Taiwan Plant I (Heavy Motor Plant)
1987 Opened Chung Li Plant II for serial motor production ( Small Motor Plant)
1987 Started Joint venture with Westinghouse Motor Company, USA, one of the leading motor manufacturers in North
America
1991 Foundation of TECO Perai, Penang Provence, Malaysia, to serve the local market with low voltage motors
1995 100% take over of Westinghouse motor business by TECO
1995 Foundation of TECO Westinghouse Motor Company
2000 Opened TECO factory for low voltage motors in Suzhou, Jiangsu Provence, China
2003 Opened TECO factory for low and medium voltage motors in Wuxi, China
2005 Opened third TECO factory in Nanchang, Jiiangxi Provence, China
2006 Opened factory in Huyen Long Thanh, Tinh dong Nai Provence, Vietnam to increase local business
2008 Opened TECO repair and assembling plant in Dammam, Kingdom of Saudi Arabia, on joint venture basis
2008 Established TECO fuan in Fujian Provence, China, with a decision for construction of a new plant
2010 Starting the prodcution of aluminum motors and semi finished aluminum parts at TECO Fuan factory in Fujian
Provence, China.
2012 Established India Branch Company.
2013 Established Turkey Branch Company
2014 Established bonded warehouse in Netherlands

page 2
Performance Characteristics

Max. r.p.m

Safe running speed for the squirrel-cage induction motors. Unless otherwise the name plate specifies, all the squirrel-
cage, 3 phase, induction motors lower than 1000V and smaller than 315 Frame Size can safely run continuously at the
speed in the table below.

The safe Max. r.p.m. for the squirrel-cage, 3 phase induction motors of 1000V or lower.

Frame Size 2 Pole 4 Pole 6 Pole

100 5200 3600 2400

112 5200 3600 2400

132 4500 2700 2400

160 4500 2700 2400

180 4500 2700 2400

200 4500 2300 1800

225 3600 2300 1800

250 3600 2300 1800

280 3600 2300 1800

315 3600 2300 1800

Note: When the motors run above the rated speed, for example, using in speed controller, the noise
and vibration will increase. In this situation, the motors are required to be corrected to satisfy the
acceleration ability above the rated speed. Besides, the bearing lifetime will decrease. Pay attention to
the time for adding the oil and grease to insure its lifetime.

Grease Life ( Horizontal installation)

Frame Size Pole Grease lifetime up to CT 40C

Grease for permanent lubrication bearing

80~225 2, 4, 6 20000 hours (B3 mounting)

Grease for regreasable bearing

250~280 2 3000 hours

250~280 4, 6 8000 hours

315~355 2 2000 hours

315~355 4, 6 4000 hours

Note:
1. If the coolant temperature is increase by 10K, the grease lifetime and regreasing interval are halved.
2. 2000 hours apply to horizontally installed motors with coupling transmission.

page 3
Mounting Arrangement (IM code)

Foot Mounted Flange Mounted Foot / Flange Mounted

I M 1001 (I M B3) I M 3001 (I M B5) I M 2001 (I M B35)

Horizontal Shaft. Horizontal Shaft.

Horizontal Shaft.
D type ange at D type ange at
Foot mounted.
D.E. No feet. D.E. Foot mounted.

I M 1051 (I M B6) I M 3011 (I M V1) I M 2011 (I M V15)

Horizontal Shaft.
Vertical Shaft. Vertical Shaft.
Foot wall mounted
D type ange D type ange at
with feet on
at D.E. Shaft D.E. Wall mounted.
left-side when
down. No feet. Shaft down.
viewed from D.E.

I M 1061 (I M B7) I M 3031 (I M V3) I M 2031 (I M V36)

Horizontal Shaft.
Vertical Shaft. Vertical Shaft.
Foot wall mounted
D type ange D type ange at
with feet on
at D.E. Shaft D.E. Wall mounted.
right-side when
up. No feet. Shaft up.
viewed from D.E.

I M 1071 (I M B8) I M 3601 (I M B14) I M 2101 (I M B3 4)

Horizontal Shaft.
Horizontal Shaft. Horizontal Shaft.
Ceiling mounted
C type ange at C type ange at
with feet above
D.E. No feet. D.E. Foot mounted.
motor.

I M 1011 (I M V5) I M 3611 (I M V18) I M 2111

Vertical Shaft. Vertical Shaft.

Vertical Shaft.
C type ange C type ange at
Wall mounted.
at D.E. Shaft D.E. Wall mounted.
Shaft down.
down. No feet. Shaft down.

I M 1031 (I M V6) I M 3631 (I M V19) I M 2131

Vertical Shaft. Vertical Shaft.

Vertical Shaft.
C type ange C type ange at
Wall mounted.
at D.E. Shaft D.E. Wall mounted.
Shaft up.
up. No feet. Shaft up.

It is important to nominate the IM code at enquiry and order stage to ensure that drain holes are in the
correct position and bearing arrangement is checked for suitability if the IM code differs from standard.

Standard Mounting Arrangement

TECO Stock Motors - Standard Mounting Arrangement and Terminal Box Position

Terminal box position

Mounting IM Code (IM Code) Cable entry direction
(viewed from drive end)
F oot IM1001 IMB 3 Ri ght F r om bel ow
Flange IM3011 IMV1 As needed (motor can be rotated) From ange end
F oot & F l ange IM2001 IMB 35 Ri ght F r om bel ow

page 4
 IE 2

BASIC SPECIFICATION - AESV2W, AESU2W

Kind of Motors Squirrel-Cage Induction Motors ( SCIM)

Design Standard IEC

Voltages 380V, 400V, 415V or others

Frequency 50Hz or 60Hz

Output Range 0.55kW~315kW

R.P.M ( SYN.) 3000~1000 R.P.M. (2~6 Poles )

RATING

Time Duty Continuous S1, S.F. 1.0

Frame No. 80M~355L

Protection Enclosure Totally Enclosed ( IP55)

Cooling Method Self External Fan, Surface Cooling (IC411)

Horizontal Foot Mounted B3 (IM1001)

Horizontal Flange Mounted B5 (IM3001)
Mounting
Horizontal Foot and Flange Mounted B35 (IM2001)
Vertical Flange Mounted, Shaft down V1 (IM3011)

Place: Shadow, Non-Hazardous, Ambient Temperature: -15~40C

Environment Condition Relative Humidity: Less Than 90%RH (Non-Condensation)
Altitude: Less Than 1,000 Meters
APPLICATION

Voltage: 10%, Frequency: 5%, and 10% Max. of Combined Voltage and Frequency. But
Power Source Conditions
Frequency Variation Does Not Exceed 5%

Method of Starting Full Voltage Direct On Line or Y- Starting

Direct Coupling
Drive Method
Belt Service, However, 2 Pole 22kW and Up Coupling Service is the Way.

Direction of Rotation Bi-Directional

Bracket Mounting, Vacuum De-Gassed High Quality Open Bearings for Frame Nos.
Bearing
180M~355L, Grease Pre-Packed Shielded Rolling Bearings for the Others

Cast Iron, Can be Rotated Each 90C With Conduit Hole for Cable Entrance. The Terminal
CONSTRUCTION

Lead Terminal Box is Usually Placed on The Top of The Frame and The Cables Could be Let Out from
Four Possible Directions.

Terminal Box Solderless Lug Terminals

Stator Insulation Class F Insulation System

Phenolic Rust Poof Base Plus Lacquer Surface Finished Painting in Pebble Gray Color.
Painting
(Munsell 5Y 7.5/1; RAL 7032)

Bolt Thread ISO Metric System

Test Procedure IEC 60034-2-1 and Full Voltage Measuring Starting Performance

Winding Temperature Rise Not to Exceed 80C Rise by Resistance Method at S.F.1.0 Operation
PERFORMANCE

Over Speed 120% Syn. R.P.M for 2 Min.

Over Torque 160% Rated Torque for 15 Sec.

Shaft height/mm 80 H 132 132<H 280 H>280

Vibration
Grade
Vibration (r.m.s.) Mounting Velocity mm/s Velocity mm/s Velocity mm/s
A Free suspension 1.6 2.2 2.8

page 5
IE 2

ELECTRICAL CHARACTERISTICS - AESV2W, AESU2W

TEFC, Class F, 40oC Ambient Temperature, IEC; Design N Continuous Duty, S. F. 1.0 380V/50Hz

OUTPUT EFFICIENCY POWER FACTOR CURRENT TORQUE NOISE

ROTOR SOUND APP.
FULL FRAME FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED PULL BREAK GD2 POWER WEIGHT
kW hp LOAD NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR UP DOWN kg-m2 NO-LOAD kg
rpm (%) (%) (%) (%) (%) (%) (A) %FLT kg-m %FLT %FLT %FLT dB(A)
1430 80M 78.1 78.0 75.3 74.0 64.0 49.5 1.45 640 0.381 260 230 290 0.010 78 17
0.55 0.75
930 80M 74.0 72.8 68.4 65.5 56.0 43.0 1.72 470 0.585 255 245 255 0.013 73 19.5
2865 80M 77.4 75.8 72.6 84.5 77.5 66.0 1.74 630 0.253 225 200 280 0.005 84 16.5
0.75 1 1430 80M 79.6 79.5 76.3 74.5 65.0 51.0 1.92 705 0.508 330 290 340 0.011 78 18.5
935 90S 75.9 75.8 73.5 73.0 63.5 50.5 2.06 480 0.776 170 170 220 0.018 73 24.5
2880 80M 79.6 80.3 79.1 85.5 78.5 66.5 2.46 775 0.378 255 200 305 0.007 84 19.5
1.1 1.5 1440 90S 81.4 81.6 79.3 77.5 69.0 55.0 2.65 740 0.756 275 220 310 0.017 78 24.5
935 90L 78.1 77.6 74.9 72.0 62.5 49.0 2.97 550 1.164 205 195 245 0.025 73 28.5
2845 90S 81.3 81.5 80.5 90.0 86.0 75.5 3.11 650 0.510 220 170 250 0.010 88 23
1.5 2 1430 90L 82.8 83.8 82.7 82.5 75.5 62.5 3.34 740 1.015 265 190 280 0.022 82 27.5
955 100L 79.8 79.1 77.3 71.5 63.5 50.0 3.99 550 1.520 165 130 230 0.044 74 36.4
2840 90L 83.2 84.0 83.0 89.5 85.0 75.5 4.49 750 0.767 265 230 300 0.013 88 27
2.2 3 1455 100L 84.3 84.6 82.9 79.0 71.0 58.0 5.02 790 1.497 215 175 290 0.041 82 36.5
945 112M 81.8 80.8 79.6 75.5 67.5 54.0 5.41 570 2.304 205 175 245 0.071 74 47
2890 100L 84.6 84.4 83.6 89.0 85.0 76.0 6.05 820 1.005 215 195 280 0.022 93 37.6
3 4 1445 100L 85.5 85.4 84.3 80.5 73.0 60.0 6.62 795 2.009 210 155 275 0.050 86 40
965 132S 83.3 81.8 79.2 72.5 63.5 50.0 7.55 585 3.009 195 185 270 0.097 82 57.5
2880 112M 85.8 86.5 85.5 91.0 88.0 81.0 7.78 890 1.384 235 230 335 0.042 93 47.5
4 5.5 1455 112M 86.6 87.0 86.1 81.0 74.5 62.5 8.66 830 2.744 260 220 290 0.083 86 52
960 132M 84.6 84.8 84.3 77.5 69.5 56.5 9.27 645 4.159 190 175 275 0.131 82 69
2925 132S 87.0 87.0 85.7 85.5 81.5 73.0 11.2 690 1.861 190 145 250 0.057 93 61.5
5.5 7.5 1460 132S 87.7 87.8 86.3 81.5 75.0 63.0 11.7 775 3.729 255 190 320 0.113 86 67.5
965 132M 86.0 85.3 82.9 72.0 63.5 50.0 13.5 690 5.641 210 160 280 0.171 82 77.5
2905 132S 88.1 88.6 87.6 84.5 80.5 71.5 15.3 660 2.499 190 165 250 0.066 97 67
7.5 10 1465 132M 88.7 89.0 88.8 85.5 80.5 70.0 15.0 760 4.955 230 165 280 0.133 90 78
960 160M 87.2 88.0 87.0 81.5 76.5 66.0 16.0 600 7.561 210 185 225 0.363 82 110
2940 160M 89.4 89.4 88.6 91.5 89.0 83.0 20.4 830 3.703 220 155 270 0.154 97 105
11 15 1465 160M 89.8 90.1 89.5 88.5 85.0 77.5 21.0 730 7.432 205 155 255 0.297 90 110
965 160L 88.7 89.2 88.6 81.5 76.0 65.0 23.1 685 11.280 245 230 270 0.558 85 140
2925 160M 90.3 90.3 90.2 93.0 91.5 88.0 27.1 765 4.963 230 155 240 0.192 100 120
15 20 1470 160L 90.6 91.3 90.5 86.5 82.5 73.5 29.1 785 9.876 235 185 280 0.396 94 130
975 180L 89.7 89.7 88.4 80.0 74.0 62.5 31.8 760 14.890 265 185 315 1.342 88 200
2945 160L 90.9 91.7 90.5 92.5 90.5 86.0 33.4 880 6.162 265 175 280 0.237 100 135
18.5 25 1470 180M 91.2 92.0 91.0 85.0 82.5 75.5 36.3 630 12.340 180 175 275 0.654 94 180
975 200L 90.4 91.1 90.2 82.5 79.0 70.5 37.7 610 18.610 200 185 220 1.604 88 250
2945 180M 91.3 91.5 91.0 90.0 88.0 82.5 40.7 800 7.394 220 175 280 0.283 100 175
22 30 1475 180L 91.6 91.8 91.5 84.0 80.5 72.5 43.4 710 14.760 195 150 230 0.712 94 190
975 200L 90.9 91.1 90.9 82.0 78.5 69.5 44.8 680 22.330 225 180 220 1.912 88 270
2955 200L 92.0 92.0 90.8 90.0 89.0 85.0 55.0 775 9.825 185 140 275 0.521 102 240
30 40 1475 200L 92.3 92.3 91.7 87.5 84.5 77.5 56.4 790 19.680 205 185 245 1.220 98 255
975 225M 91.7 92.0 91.5 86.0 83.5 76.0 57.8 615 29.780 175 155 210 2.442 91 325

page 6
 IE 2

ELECTRICAL CHARACTERISTICS - AESV2W, AESU2W

TEFC, Class F, 40oC Ambient Temperature, IEC; Design N Continuous Duty, S. F. 1.0 380V/50Hz

OUTPUT EFFICIENCY POWER FACTOR CURRENT TORQUE NOISE

ROTOR SOUND APP.
FULL FRAME FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED PULL BREAK GD2 POWER WEIGHT
kW hp LOAD NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR UP DOWN kg-m2 NO-LOAD kg
rpm (%) (%) (%) (%) (%) (%) (A) %FLT kg-m %FLT %FLT %FLT dB(A)
2950 200L 92.5 92.0 91.3 90.5 89.5 85.5 67.2 845 12.30 205 140 240 0.663 102 270
37 50 1480 225S 92.7 92.8 92.1 87.0 84.0 77.0 69.7 710 24.52 190 160 245 1.649 98 320
980 250M 92.2 92.4 91.9 85.0 81.0 72.5 71.7 640 37.03 180 180 220 3.373 91 410
2965 225M 92.9 92.3 90.9 90.5 87.5 81.0 81.3 875 14.69 160 155 320 1.074 104 320
45 60 1475 225M 93.1 93.3 92.9 86.5 83.5 76.5 84.9 690 29.53 190 160 270 1.731 100 330
985 280S 92.7 92.6 92.0 84.0 81.0 73.5 87.8 650 44.52 140 115 230 6.400 94 580
2970 250M 93.2 93.4 93.1 91.0 90.0 85.5 98.5 735 18.33 135 115 295 1.211 104 405
55 75 1485 250M 93.5 93.6 93.1 87.0 85.0 79.0 103.0 780 36.66 265 230 250 3.621 100 450
985 280M 93.1 93.0 92.5 83.5 81.5 74.0 107.0 650 55.27 145 120 230 7.600 94 660
2965 280S 93.8 93.8 93.2 90.5 89.5 85.5 134.0 700 24.65 160 135 260 2.000 106 565
75 100 1480 280S 94.0 94.0 93.5 87.5 86.0 78.5 139.0 690 49.25 170 145 260 5.200 103 620
985 315S 93.7 93.6 93.1 83.5 81.0 73.0 146.0 650 74.20 150 125 220 12.400 98 870
2965 280M 94.1 94.0 93.5 90.5 89.5 86.0 161.0 700 30.60 165 140 260 2.400 106 615
90 125 1480 280M 94.2 94.2 93.6 87.5 86.0 78.0 166.0 690 59.26 180 155 260 6.000 103 690
985 315M 94.0 94.0 93.4 84.0 81.5 74.0 173.0 650 89.04 155 130 220 14.000 98 932
2965 315S 94.3 94.3 93.7 89.5 88.5 85.0 198.0 700 36.72 150 125 250 4.400 106 850
110 150 1480 315S 94.5 94.5 93.8 88.5 87.0 82.0 200.0 690 72.43 160 135 240 8.800 103 960
985 315L 94.3 94.2 93.6 85.0 82.0 74.5 209.0 650 108.80 150 125 220 18.800 98 1120
2965 315M 94.6 94.6 93.8 90.0 89.0 86.0 236.0 690 42.84 145 120 240 4.800 109 922
132 175 1480 315M 94.7 94.7 94.0 88.5 87.5 82.5 239.0 675 86.80 160 135 240 10.000 106 1000
985 315L 94.6 94.5 93.8 85.0 83.0 75.5 249.0 650 130.60 150 125 220 20.400 102 1250
2970 315L 94.8 94.8 94.0 89.0 88.0 84.5 288.0 690 52.55 150 125 240 5.200 109 980
1485 315L 94.9 94.9 94.1 88.5 87.0 82.5 289.0 670 105.20 140 115 230 11.600 106 1090
160 215
985 315L 94.8 94.8 94.0 84.5 82.0 74.0 304.0 650 158.30 145 120 230 23.200 102 1280
985 355M 94.8 94.8 94.0 84.5 82.0 74.0 303.0 650 158.30 145 120 230 31.600 102 1700
2970 315L 95.0 95.0 94.1 90.5 90.0 88.0 353.0 690 65.99 150 125 240 6.400 109 1150
1485 315L 95.1 95.0 94.2 88.5 87.0 83.0 361.0 670 131.50 150 125 230 14.400 106 1280
200 270
985 315D 95.0 94.9 94.1 85.0 83.0 76.0 376.0 650 197.90 155 130 230 38.800 102 1665
985 355M 95.0 94.9 94.1 85.0 83.0 76.0 376.0 650 197.90 155 130 230 40.800 102 1900
2975 315D 95.0 95.0 94.2 91.0 90.5 88.5 439.0 690 81.74 140 115 240 10.000 111 1600
2975 355M 95.0 95.0 94.2 91.0 90.5 88.5 439.0 690 81.74 140 115 240 10.800 111 1700
1485 315D 95.1 95.1 94.3 89.0 88.0 84.0 449.0 680 164.00 140 115 230 25.200 108 1650
250 335
1485 355M 95.1 95.1 94.3 89.0 88.0 84.0 449.0 680 164.00 140 115 230 27.200 108 1750
985 315D 95.0 95.0 94.2 85.0 83.5 77.0 470.0 650 247.30 150 125 230 46.400 105 1840
985 355L 95.0 95.0 94.2 85.0 83.5 77.0 470.0 650 247.30 150 125 230 46.000 105 2080
2975 315D 95.0 95.0 94.2 91.5 91.0 89.0 551.0 700 103.20 140 115 240 12.000 111 1760
2975 355L 95.0 95.0 94.2 91.5 91.0 89.0 551.0 700 103.20 140 115 240 14.000 111 1870
315 420
1485 315D 95.1 95.1 94.3 89.0 88.0 84.5 566.0 675 206.70 140 115 230 31.200 108 1860
1485 355L 95.1 95.1 94.3 89.0 88.0 84.5 565.0 675 206.70 140 115 230 34.400 108 1960

NOTE:* The above are typical values based on test according to IEC60034-2-1:2007
* Tolerance according to IEC60034-1
* Breakdonw & Locked rotor torques are show as average expected voltages
* Efficiency, power factor, speed and torque are the same for other voltages.
Current values vary inversely with voltage.
* F#315D only suitable for IM B3
* Noise: sound power level at no-load, dB(A)/1M, tolerance +3 dB(A)
* Data subject to change without notice

page 7
IE 2 IE 3

DIMENSION
Horizontal Foot Mounting B3 (IM 1001)
TYPE: AESV2W, AESV3W
L O L O
AC
AC AC
AG LL
AG LL AG
AS BE 2-UB 2-UB
AS BE AS

BC
BC

AD
BC

HE
AD
AD

HE
HE

EF EB EF EB
EF EB
EG
EG

H
H
EG

HA
HA
H
HA

AA AA E C
A E C B A
AA E C B BB AB 4-K
A AB 4-K Holes
BB Holes
AB 4-K
Holes F
F F

GA
G
GA

GA
G
G

D DB
D DB
FIG.1 FIG.2 D DB

Output (kW)
FRAME FIG.
A AA AB AC AD AG AS B B' BA BA' BB BC BE C H
2P 4P 6P SIZE NO.

0.75 0.55 0.37

80M 1 125 34.5 161 177 163 125 67.5 100 -- -- -- 137 18.5 40 50 80
1.1 0.75 0.55

1.5 1.1 0.75 90S 140 40 180 197 173 125 67.5 100 -- -- -- 161 36 40 56 90
2.2 1.5 1.1 90L 140 40 180 197 173 125 67.5 125 -- -- -- 186 36 40 56 90

3 2.2 1.5 2
100L 160 40 200 219 193 147 78.5 140 -- -- -- 181 21 50 63 100
-- 3 --

4 4 2.2 112M 190 45 235 235 200.5 147 78.5 140 -- -- -- 186 28 50 70 112

5.5 5.5 3
132S 216 57 263 273 218 147 78.5 140 -- -- -- 184 6 50 89 132
7.5 -- --
3
-- 7.5 4
132M 216 57 263 273 218 147 78.5 178 -- -- -- 222 6 50 89 132
-- -- 5.5

11 11 7.5
160M 254 60 300 317 273 193 91.5 210 -- 57.5 57.5 256 47 89 108 160
15 -- --

18.5 15 11 160L 254 60 300 317 273 193 91.5 254 -- 57.5 101.5 300 47 89 108 160
22 18.5 -- 180M 279 65 330 354 299 193 91.5 241 -- 62 62 292 39 89 121 180

-- 22 15 180L 279 65 330 354 299 193 91.5 279 241 62 100 330 39 89 121 180
4

30 18.5
30 200L 318 70 378 398 332 231 110.5 305 -- 76 76 365 60 106 133 200
37 22

-- 37 -- 225SC 356 75 431 449 358 231 110.5 286 -- 90 90 350 37.5 106 149 225
45 -- -- 225MA 356 75 431 449 358 231 110.5 311 286 90 115 375 37.5 106 149 225
-- 45 30 225MC 356 75 431 449 358 231 110.5 311 286 90 115 375 37.5 106 149 225
55 -- -- 250MA 406 85 480 499 400 255 122.5 349 -- 105 105 425 57.5 119 168 250
5
-- 55 37 250MC 406 85 480 499 400 255 122.5 349 -- 105 105 425 57.5 119 168 250

Note: 1. Tolerance of shaft end diameter D: Among 19~ 28:j6

2. Tolerance of shaft end diameter D: 38:k6
3. Tolerance of shaft end diameter D: Among 42~ 48:k6
4. Tolerance of shaft end diameter D: Among 55~ 65:m6
5. Tolerance of shaft center high H:+0, -0.5.
6. Bearing No. in( ) is for 2P.

page 8
 IE 2 IE 3

L O L O L O
AC AC
LL AG LL AG LL
BE 2-UB AS BE AS BE 2-UB
2-UB

BC
BC BC

AD
HE
AD
AD

HE
HE

EF EB
EF EB EF EB

EG
EG EG

H
HA
H

H
HA

HA
AA BA BB
E B A E C B
C AA BA BA
BB AB BB
4-K A E C B 4-K
Holes AB 4-K BB Holes
Holes F
F

GA
GA

G
G
GA

DB D DB
D
DB FIG.3 FIG.4 FIG.5 Dimension in mm

SHAFT EXTENSION BEARING

HA HE K L LL O UB OPPOSITE
D E EB EF EG F G GA DB DRIVE END
DRIVE END

10 123.5 10 293.0 115 40 M20x1.5 19 40 32 4 16 6 15.5 21.5 M6 6204ZZ 6204ZZ

10 133.5 10 344.5 115 40 M20x1.5 24 50 40 5 19 8 20 27 M8 6205ZZ 6205ZZ

10 133.5 10 369.5 115 40 M20x1.5 24 50 40 5 19 8 20 27 M8 6205ZZ 6205ZZ

12 157 12 392.0 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6206ZZ 6206ZZ

13 164.5 12 412.5 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6306ZZ 6306ZZ

16 182 12 466 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12 6308ZZ 6306ZZ

16 182 12 504 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12 6308ZZ 6306ZZ

18 215 14.5 608 193 60 M32x1.5 42 110 100 5 36 12 37 45 M16 6309ZZ 6307ZZ

18 215 14.5 652 193 60 M32x1.5 42 110 100 5 36 12 37 45 M16 6309ZZ 6307ZZ
20 241 14.5 672 193 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16
(6311C3) (6310C3)
20 241 14.5 710 193 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16 6311 6310

(6312C3) (6212C3)
24 262 18.5 770 231 80 M50x1.5 55 110 100 5 42 16 49 59 M20
6312 6212

28 288 18.5 816 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20

(6312C3) (6212C3)
28 288 18.5 811 231 90 M50x1.5 55 110 100 5 42 16 49 59 M20
6313 6313
28 288 18.5 841 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20
30 322 24 921 255 105 M63x1.5 60 140 125 7.5 42 18 53 64 M20 (6313C3) (6313C3)
30 322 24 921 255 105 M63x1.5 65 140 125 7.5 42 18 58 69 M20 6315 6313

page 9
 IE 2 IE 3

DIMENSION
Horizontal Foot Mounting B3 (IM1001)
TYPE: AESV2W, AESV3W
AC L O AC L O
AG AG LL
AS LL
BE AS BE
2-UB 2-UB

BC BC

AD
AD

HE
HE

E
EF EB
EF EB

EG EG
H

H
HA

HA
AA AA BA BA 4-K Holes AA AA BA BA
A C B A 4-K Holes
C B
AB BB AB BB

F F
GA

GA
G

G
DB DB
D D
FIG.1 FIG.2

Output (kW) FRAME FIG.
A AA AB AC AD AG AS B B' BA BA' BB BC BE C H
2P 4P 6P SIZE NO.

75 -- -- 280SA 457 110 560 550 446 255 122.5 368 -- 110 110 445 48 119 190 280
-- 75 45 280SB 457 110 560 550 446 255 122.5 368 -- 110 110 445 48 119 190 280
1
90 -- -- 280MA 457 110 560 550 446 255 122.5 419 -- 130 137 495 48 119 190 280
-- 90 55 280MB 457 110 560 550 446 255 122.5 419 -- 130 137 495 48 119 190 280
110 -- -- 315SA 508 115 615 620 527.5 336 163 406 -- 210 210 620 53 140 216 315
-- 110 75 315SB 508 115 615 620 527.5 336 163 406 -- 210 210 620 53 140 216 315

132
-- -- 315MA 508 115 615 620 527.5 336 163 457 -- 240 240 670 53 140 216 315
(160)

132 90
-- 315MB 508 115 615 620 527.5 336 163 457 -- 240 240 670 53 140 216 315
(160) (110) 2

160
-- -- 315LA 508 130 630 620 527.5 336 163 508 -- 230 230 770 53 140 216 315
200

110
160
-- 132 315LB 508 130 630 620 527.5 336 163 508 -- 230 230 770 53 140 216 315
200
(160)

250
-- -- 315DA 508 150 650 682 590 412 189 900 -- 180 250 1060 68 180 216 315
315
3
250 200
-- 315DB 508 150 650 682 590 412 189 900 -- 180 250 1060 68 180 216 315
315 250

250 -- -- 355MA 610 150 750 810 645 412 189 -- 560 330 330 910 48 180 254 355
-- 250 200 355MB 610 150 750 810 645 412 189 -- 560 330 330 910 48 180 254 355
4
315 -- -- 355LA 610 150 750 810 645 412 189 630 -- 330 330 910 48 180 254 355
-- 315 250 355LB 610 150 750 810 645 412 189 630 -- 330 330 910 48 180 254 355

Note: 1. Tolerance of shaft end diameter D: m6

2. Tolerance of shaft center height H: +0, -1
3. Tolerance of Key Width F: h9

page 10
 IE 2 IE 3

AC L O AC L O
AG LL AG LL
AS BE AS BE
2-UB 2-UB

BC BC
E E
AD

AD
HE

HE
EF EB EF EB

EG EG
H

H
HA

HA
AA AA BA BA AA AA BA BA
A C B A
AB BB C B(355M)
4-K Holes AB B(355L) 6-K Holes
BB
F F
GA

GA
G

G
D DB
D DB
FIG.3 FIG.4
Dimension in mm

SHAFT EXTENSION BEARING

HA HE K L LL O UB DRIVE OPPOSITE DRIVE OPPOSITE
G GAD DBE EB EF EG F G GA DB
END DRIVE END END DRIVE END
35 367 24 1037.5 255 140 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3
35 367 24 1037.5 255 140 M63x1.5 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3
35 367 24 1087.5 255 140 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3
35 367 24 1087.5 255 140 M63x1.5 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3
35 430 28 1216 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3
35 430 28 1246 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

35 430 28 1266 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

35 430 28 1296 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

45 430 28 1366 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

45 430 28 1396 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

45 485 28 1674 372 200 M72x2 75 140 125 7.5 40 20 67.5 79.5 M20 6316C3 6316C3

45 485 28 1704 372 200 M72x2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3

45 540 28 1575 372 230 M72x2 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6318C3
45 540 28 1605 372 230 M72x2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3
45 540 28 1575 372 230 M72x2 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6318C3
45 540 28 1605 372 230 M72x2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3

page 11
IE 2 IE 3

DIMENSION
Horizontal Flange Mounted B5 (IM 3001)
Vertical Flange Mounted, Shaft Down V1 (IM 3011)
TYPE: AESU2W, AESU3W
L O L O
AG LL AC
AS LE BE AG LE LL
2-UB 2-UB
AS BE
LA LA
T T

AD
AD

HE
HE

M
EF EB
M

45
EF EB
45

N
P
N

AC
P

EG EG
E E

4-S
Holes HH
4-S Holes HH

F
F
GA
G

GA
G
D DB DB
D
FIG.1 FIG.2

Output (kW) FLANGE DIMENSION

FRAME FIG.
AC AD AG AS BE HE HH
2P 4P 6P SIZE NO. LA LE M N P S T

0.75 0.55 0.37

80M 1 12 40 165 130 200 12 3.5 177 163 125 67.5 40 123.5 68.5
1.1 0.75 0.55

1.5 1.1 0.75 90S 12 50 165 130 200 12 3.5 271 173 125 67.5 40 133.5 92

2.2 1.5 1.1 90L 12 50 165 130 200 12 3.5 271 173 125 67.5 40 133.5 92

3 2.2 1.5 2
100L 16 60 215 180 250 14.5 4 288.5 193 147 78.5 50 157 84
-- 3 --

4 4 2.2 112M 15 60 215 180 250 14.5 4 306.5 200.5 147 78.5 50 164.5 98

5.5 5.5 3
132S 16 80 265 230 300 14.5 4 360 218 147 78.5 50 182 95
7.5 -- --
3
-- 7.5 4
132M 16 80 265 230 300 14.5 4 360 218 147 78.5 50 182 95
-- -- 5.5

11 11 7.5
160M 15 110 300 250 350 18.5 5 427 273 193 91.5 89 215 155
15 -- --

18.5 15 11 160L 15 110 300 250 350 18.5 5 427 273 193 91.5 89 215 155

22 18.5 -- 180M 4 15 110 300 250 350 18.5 5 476 299 193 91.5 89 241 160

-- 22 15 180L 15 110 300 250 350 18.5 5 476 299 193 91.5 89 241 160

30 18.5
30 200L 17 110 350 300 400 18.5 5 524 332 231 110.5 106 262 193
37 22

Note: 1. Tolerance of shaft end diameter D: Among 19~ 28:j6

2. Tolerance of shaft end diameter D: 38:k6
3. Tolerance of shaft end diameter D:Among 42~ 48:k6
4. Tolerance of N: j6
5. Bearing No. in( ) is for 2P.

page 12
 IE 2 IE 3

L O L O
AC AC LE
AG LE LL AG LL
AS BE 2-UB AS BE 2-UB
LA
LA

AD
AD
HE

HE
M

EF EB
45

EF EB

45
N
P

AC

AC
N
EG EG
E E

4-S 4-S Holes

Holes T HH HH
T

F F
GA

GA
G

G
D DB D DB

FIG.3 FIG.4
Dimension in mm

SHAFT EXTENSION BEARING

L LL O UB OPPOSITE
D E EB EF EG F G GA DB DRIVE END
DRIVE END

293 115 40 M20x1.5 19 40 32 4 16 6 15.5 21.5 M6 6204ZZ 6204ZZ

344.5 115 40 M20x1.5 24 50 40 5 19 8 20 27 M8 6205ZZ 6205ZZ

369.5 115 40 M20x1.5 24 50 40 5 19 8 20 27 M8 6205ZZ 6205ZZ

392 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6206ZZ 6206ZZ

412.5 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6306ZZ 6306ZZ

466 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12 6308ZZ 6306ZZ

504 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12 6308ZZ 6306ZZ

608 193 60 M32x1.5 42 110 100 5 36 12 37 45 M16 6309ZZ 6307ZZ

652 193 60 M32x1.5 42 110 100 5 36 12 37 45 M16 6309ZZ 6307ZZ

672 193 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16 (6311C3) (6310C3)
710 193 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16 6311 6310

(6312C3) (6212C3)
770 231 80 M50x1.5 55 110 100 5 42 16 49 59 M20
6312 6212

page 13
 IE 2 IE 3

DIMENSION
Horizontal Flange Mounted B5 (IM 3001)
Vertical Flange Mounted, Shaft Down V1 (IM 3011)
TYPE: AESU2W, AESU3W
L O
L O AC LE
AC AG
AG LE LL AS BE 2-UB
AS BE 2-UB
LA LA
T

AD
HE
AD

EF EB
HE
M

EF EB

AC
N
P
EG
N

AC
P

EG E

45
E
4-S
4-S Holes Holes HH
T HH

F
F

GA
G
DB
GA

D
G

D DB

FIG.1 FIG.2

Output (kW) FLANGE DIMENSION

FRAME FIG.
AC AD AG AS BE HE HH
2P 4P 6P SIZE NO. LA LE M N P S T

-- 37 -- 225SC 20 140 400 350 450 18.5 5 574 358 231 110.5 106 288 186.5

45 -- -- 225MA 1 20 110 400 350 450 18.5 5 574 358 231 110.5 106 288 186.5

-- 45 30 225MC 20 140 400 350 450 18.5 5 574 358 231 110.5 106 288 186.5

55 -- -- 250MA 22 140 500 450 550 18.5 5 642 400 255 122.5 119 322 225.5
2
-- 55 37 250MC 22 140 500 450 550 18.5 5 642 400 255 122.5 119 322 225.5

75 -- -- 280SA 22 140 500 450 550 18.5 5 717 446 255 122.5 119 367 238

-- 75 45 280SB 22 140 500 450 550 18.5 5 717 446 255 122.5 119 367 238
3
90 -- -- 280MA 22 140 500 450 550 18.5 5 717 446 255 122.5 119 367 238

-- 90 55 280MB 22 140 500 450 550 18.5 5 717 446 255 122.5 119 367 238

110 -- -- 315SA 25 140 600 550 660 24 6 660 527 336 163 140 430 269

-- 110 75 315SB 25 170 600 550 660 24 6 660 527 336 163 140 430 269

132 4
-- -- 315MA 25 140 600 550 660 24 6 660 527 336 163 140 430 269
(160)

132 90
-- 315MB 25 170 600 550 660 24 6 660 527 336 163 140 430 269
(160) (110)

Note: 1. Tolerance of shaft end diameter D: m6

2. Tolerance of N: j6
3.lerance of Key Width F:h9
4. Bearing No. in( ) is for 2P, marked * is for Vertical mounting
5. Output in the Brackets for Optional Matching

page 14
 IE 2 IE 3

AC L O AC L O
AG LL AG LL
AS LE BE AS LE BE
T 2-UB T 2-UB

AD
AD

HE
HE

EF EB EF EB

N
P
EG
N
P

EG E
E
M
M

8-S Holes LA
LA HH
8-S Holes HH
F
F

GA
G
GA
G

DB
D D DB

FIG.3 FIG.4

Dimension in mm

SHAFT EXTENSION BEARING

L LL O UB OPPOSITE
D E EB EF EG F G GA DB DRIVE END
DRIVE END

816 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20

(6312C3) (6212C3)
811 231 90 M50x1.5 55 110 100 5 42 16 49 59 M20
6313 6213
841 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20

921 255 105 M63x1.5 60 140 125 7.5 42 18 53 64 M20 (6313C3) (6313C3)
921 255 105 M63x1.5 65 140 125 7.5 42 18 58 69 M20 6315 6313

1037.5 255 140 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

1037.5 255 140 M63x1.5 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3

1087.5 255 140 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

1087.5 255 140 M63x1.5 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3

6316C3
1216 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6314C3
*7316C3

1246 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

6316C3
1266 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6314C3
*7316C3

1296 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

page 15
 LA

BC

AD
HE
M
EF EB

AC
N
P

M
EG
E
IE 2 IE 3

H
HA
AA
A 4
AA 4-K Holes AB
A T C B
AB BB
F
L O F
L O AG 4-S Holes LL
LL
DIMENSION

GA
AS LE BE 2-UB

G
LE BE 2-UB

GA
G
LA DB
D
LA Foot and Flange Mounting B35 (IM 2001) D DB
BC
BC TYPE: AESV2W, AESV3W

AD
HE
L L O L O
EFO EB AG 4-S Holes LL AG
AG LL AG LL 4-
EF EB AS 4-S Holes LE BE
AS AS LE BE Holes2-UB
4-S BE 2-UB AS Ho
2-UB LE

AC
P
N
EG LA LA
AC

M
E

H
EG LA

HA
E BC BC

AD

AD
AA

HE
BC

HE
AD

4-K Holes T C B

M
A EF EB
HE

AB BB EF EB
M

T C B
BB EF EB

AC
N

AC
P
P
N
F
EG M

AC
N
P

EG

M
E

H
EG E

H
HA

HA
GA

E
H
HA

DB AA AA AA
D A 4-K Holes AT C B T C B A
AA 4-K Holes AB AB 4-K
BB Holes BB AB 4
A T C B
AB BB F
F F
F
L O L O

GA
LL AG 4-S LL

GA
GA
2-UB

G
AS BE

G
G
LE BE Holes
GA

2-UB D DB
LE
G

LA D DB
LA D DB
D DB
BC FIG.1 BC FIG.2
AD
HE

F EB L O L O L O
AG LL EF EB AG 4-S LL
4-S Holes 2-UB AS AG 4-S Holes
BE LL AG 4-
AS LE BE Holes AS 2-UB BE 2-UB
AC

AS

AC
LE
N
P

LA LE
EG M EG
LA LA
E E T
H
HA

BC AD BC BC
AD
HE

HE
AA BA

AD
BA

HE
T C B C
M

EF EB A T B
BB AB 4-K Holes BB EF EB
EF EB
N

AC
P

AC
N
P

AC
N
M

P
EG EG
E M E EG M
H

E
GA
HA

HA
G

H
AA D DB FIG.3 AA HA BA BA
A T C B A T C B
AB 4-K Holes BB AB AA Holes
4-K BB AA
A A
AB 4-K Holes C B AB 4
F F B
Output (kW) FLANGE DIMENSION F BB F
L OFRAME FIG. L O
GA

A AA AB AC AD AG AS B B' BA BA' BB
GA

LL AG LL
G

LE 4-K M
Holes
G

2P2-UB 4P SIZE NO. T 2-UB D

GA

6P ASLA N P S

GA
LE BE BE DB
G

G
LA D DB LA
T T D DB D DB
0.75 0.55 0.37
BC 80M 1 12 40 165 130 BC
200 12 3.5 125 34.5 161 177 163 125 67.5 100 -- -- -- 137
1.1 0.75 0.55
AD
HE

L O L O
EB 1.5 1.1
AG 0.75
4-S Holes90S 12LL 50 2-UB
165 130EB
EF 200 12 3.5 140
AG 40.0
4-K 180
Holes 197 173 125
LL 67.5
2-UB
100 -- -- -- 161
AS LE BE AS BE
2.2 1.5 1.1 90L 12 50 165 130 200 12 3.5 140 40.0 180 197
LA 173 125 67.5 125 -- -- -- 186
N

AC
AC

LA
T M EG T
E 3 2.2 1.5 2 BC E
H

100L 16 60 215 180 250 14.5 4 160 40.0 200 219 BC

193 147 78.5 140 -- -- -- 181
HA

-- 3 --
AD
HE

AD
HE

AA A
C B 4 4 2.2 112M
EF EB 15 60 215Holes180
4-K C
250 14.5 B 4 190 45.0 235 EF235
EB 200.5 147 78.5 140 -- -- -- 186
AB B
B BB
N

AC
AC

5.5 M 5.5 3
N

BB F
P

132S
EG 16 80 265 230 300 14.5 4 M216 57.0 263 273
EG 218 147 78.5 140 -- -- -- 184
7.5 -- -- E E
H
H

3
GA

HA
HA

-- 7.5 4
AA
A
132M 16
D 80
DB 265 230 300 14.5 AA4 216
A 57.0 263 273 218
C
147 78.5 178 -- -- -- 222
-- B
AB -- 5.54-K Holes C B
B
AB 4-K Holes B
BB
11 F 11 7.5 BB F
160M 15 110 300 250 350 18.5 5 254 60.0 300 317 273 193 91.5 210 -- 57.5 57.5 256
15 -- --
GA

GA
G

18.5 15 11 160L 15 110 300 250 350 18.5 5 254 60.0 300 317 273 193 91.5 254 57.5 101.5 300
D DB D DB
22 18.5 -- 180M 4 15 110 300 250 350 18.5 5 279 65.0 330 354 299 193 91.5 241 -- 62 62 292
-- 22 15 180L 15 110 300 250 350 18.5 5 279 65.0 330 354 299 193 91.5 279 241 62 100 330
30 18.5
30 200L 17 110 350 300 400 5 318 70.0 378 398 332 231 110.5 305 -- 76 76 365
37 22 18.5
-- 37 -- 225SC 20 140 400 350 450 18.5 5 356 75.0 431 449 358 231 110.5 286 -- 90 90 350
45 -- -- 225MA 5 20 110 400 350 450 18.5 5 356 75.0 431 449 358 231 110.5 311 286 90 115 375
-- 45 30 225MC 20 140 400 350 450 18.5 5 356 75.0 431 449 358 231 110.5 311 286 90 115 375
55 -- -- 250MA 22 140 500 450 550 18.5 5 406 85.0 480 499 400 255 122.5 349 -- 105 105 425
6
-- 55 37 250MC 22 140 500 450 550 18.5 5 406 85.0 480 499 400 255 122.5 349 -- 105 105 425

Note: 1. Tolerance of shaft end diameter D: Among 19~ 28:j6

2. Tolerance of shaft end diameter D: 38:k6
3. Tolerance of shaft end diameter D: Among 42~ 48 :k6
4. Tolerance of shaft end diameter D: Among 55~ 65:m6

page 16
HA E
BC
AA

AD
HE
A 4-K Holes T C B

M
-K Holes AB BB EF EB
T C B
BB

N
F

AC
P
EG
E

H
GA

HA
G
D DB AA
A
AB 4-K Holes
T C B
BBIE 2 IE 3 AA

F
L O L O
LL AG 4-S LL
2-UB

GA
S Holes BE AS Holes BE

G
LE 2-UB

G
LA LE
LA D DB
BC BC

AD
AD
HE

HE
EF EB EF EB O L O
L O L
AG 4-S Holes LL AG 4-S Holes LL
N

AC
P

AC
2-UB

N
P
AS LE BE 2-UB AS LE BE A
2-UB EG M EG
E LA E LA
H

H
T
HA

HA
BC
AA BC BA BA
T C B

AD
A T C B

HE
AD

4-K Holes BB
HE

AB 4-K Holes BB
EF EB EF EB
F

AC

AC
P

N
N

P
EG M M
AC

EG
GA E
M

E
H

G
HA

H
D DB

HA
AA AA
A 4-K Holes T C B AA
AB BB A C B
AB 4-K Holes
B
F F BB
L O L O
Holes LL AG 4-K Holes LL
LE BE 2-UB AS BE 2-UB
GA

GA
G

G
G

LA LA
T D DB T D DB
BC BC FIG.5
FIG.4
AD
HE

L EF EB O L EF EB O
AG 4-S LL
2-UB AS BE
N

AC
AC

Holes
N
P

2-UB
EG M
LE EG
E LA E
H
HA

BC
AD

AA
HE

A C B
K Holes C B 4-K Holes
B EF EB AB B
BB
BB F
AC

AC
N
P

M EG
E
H

GA
HA

AA
B
B
A
AB 4-K Holes
T
D BA
C DB B
BB
BA
FIG.6 Dimension in mm
F SHAFT EXTENSION BEARING
BC BE C H HA HE K L LL O UB
GA

DRIVE OPPOSITE
G

D DB D E EB EF EG F G GA DB
END DRIVE END

18.5 40 50 80 10 123.5 10 293 115 40 M20x1.5 19 40 32 4 16 6 15.5 21.5 M6 6204ZZ 6204ZZ

L O L O
36 40
AG 56 90 Holes10
4-K 133.5 10 LL 344.5 115 40 M20x1.5 24 50 40 5 19 8 20 27 M8 6205ZZ 6205ZZ
2-UB AS BE 2-UB
36 40 56 90 10 133.5
LA 10 369.5 115 40 M20x1.5 24 50 40 5 19 8 20 27 M8 6205ZZ 6205ZZ
T
21 50 63 100 12 157 BC 12 392. 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6206ZZ 6206ZZ
AD
HE

28 50 70 112 13EF 164.5

EB 12 412.5 125 50 M25x1.5 28 60 50 5 22 8 24 31 M10 6306ZZ 6306ZZ
N

AC
AC

6 M
50 89 132 16 182
EG 12 466 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12 6308ZZ 6306ZZ
E
H
HA

6
AA 50A 89 132 16 182 12 504 125 50 M25x1.5 38 80 70 5 28 10 33 41 M12 6308ZZ 6306ZZ
B 4-K Holes C B
AB B
B BB
BB F
38 89 108 160 18 215 14.5 608 193 60 M32x1.5 42 110 100 5 36 12 37 45 M16 6309ZZ 6307ZZ
GA
G

38 89 108 160 18 215 14.5 652 193 60 M32x1.5 42 110 100 5 36 12 37 45 M16 6309ZZ 6307ZZ
D DB
39 89 121 180 20 241 14.5 672 193 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16 (6311C3) (6310C3)
39 89 121 180 20 241 14.5 710 193 70 M32x1.5 48 110 100 5 36 14 42.5 51.5 M16 6311 6310
(6312C3) (6212C3)
60 106 133 200 24 262 18.5 770 231 80 M50x1.5 55 110 100 5 42 16 49 59 M20
6312 6212
37.5 106 149 225 28 288 18.5 816 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20
(6312C3) (6212C3)
37.5 106 149 225 28 288 18.5 811 231 90 M50x1.5 55 110 100 5 42 16 49 59 M20
6313 6213
37.5 106 149 225 28 288 18.5 841 231 90 M50x1.5 60 140 125 7.5 42 18 53 64 M20
57.5 119 168 250 30 322 24 921 255 105 M63x1.5 60 140 125 7.5 42 18 53 64 M20 (6313C3) (6313C3)
57.5 119 168 250 30 322 24 921 255 105 M63x1.5 65 140 125 7.5 42 18 58 69 M20 6315 6313

Note: 5. Tolerance of shaft center high H:+0, -0.5.

6. Tolerance of N: j6
7. Bearing No. in( ) is for 2P.

page 17
 IE 2 IE 3

DIMENSION
Foot and Flange Mounting B35 (IM 2001)
TYPE: AESV2W, AESV3W

AC L O AC L O
AG LL AG LL
AS LE BE AS LE BE
T 2-UB 2-UB
T

BC BC
AD

AD
HE
HE

EF EB
EF EB
P
N

P
N
EG EG
E

H
E
H

M M

HA
HA

AA AA 8-S LA BA BA 4-K
AA AA
8-S LA C BA BA 4-K Holes C B Holes
B Holes
A Holes BB A BB
AB AB

F F

GA
GA

G
G

DB DB
D D

FIG.1 FIG.2

Output (kW) FRAME FIG. FLANGE DIMENSION

A AA AB AC AD AG AS B B' BA BA' BB
2P 4P 6P SIZE NO. LA LE M N P S T

75 -- -- 280SA 22 140 500 450 550 18.5 5 457 110 560 550 446 255 122.5 368 -- 110 110 445
-- 75 45 280SB 22 140 500 450 550 18.5 5 457 110 560 550 446 255 122.5 368 -- 110 110 445
1
90 -- -- 280MA 22 140 500 450 550 18.5 5 457 110 560 550 446 255 122.5 419 -- 130 137 495
-- 90 55 280MB 22 140 500 450 550 18.5 5 457 110 560 550 446 255 122.5 419 -- 130 137 495
110 -- -- 315SA 25 140 600 550 660 24 6 508 115 615 660 527.5 336 163 406 -- 210 210 620
-- 110 75 315SB 25 170 600 550 660 24 6 508 115 615 660 527.5 336 163 406 -- 210 210 620
132
-- -- 315MA 2 25 140 600 550 660 24 6 508 115 615 660 527.5 336 163 457 -- 240 240 670
(160)
132 90
-- 315MB 25 170 600 550 660 24 6 508 115 615 660 527.5 336 163 457 -- 240 240 670
(160) (110)
160
-- -- 315LA 25 140 600 550 660 24 6 508 130 630 660 527.5 336 163 508 -- 230 230 770
200
110 3
160
-- 132 315LB 25 170 600 550 660 24 6 508 130 630 660 527.5 336 163 508 -- 230 230 770
200
(160)
250
-- -- 315DA 30 140 600 550 660 24 6 508 150 650 682 590 412 189 900 -- 180 250 1060
315
4
250 200
-- 315DB 30 170 600 550 660 24 6 508 150 650 682 590 412 189 900 -- 180 250 1060
315 250
250 -- -- 355MA 30 140 740 680 800 24 6 610 150 750 810 645 412 189 -- 560 330 330 910
-- 250 200 355MB 30 170 740 680 800 24 6 610 150 750 810 645 412 189 -- 560 330 330 910
5
315 -- -- 355LA 30 140 740 680 800 24 6 610 150 750 810 645 412 189 630 -- 330 330 910
-- 315 250 355LB 30 170 740 680 800 24 6 610 150 750 810 645 412 189 630 -- 330 330 910

Note: 1. Tolerance of shaft end diameter D: m6

2. Tolerance of N: j6
3. Tolerance of shaft center height H: +0, -1

page 18
 IE 2 IE 3
O

B AC L O L O
AG
AC
LL AG LL
AS LE BE
2-UB AS LE BE
T 2-UB
T
BC

AD
BC
HE

AD
HE
EF EB
P EF EB
N EG

P
N
E EG
H

M
HA

H
HA
BA AA AA LA BA BA
A C B
4-K Holes AB AA AA LA BA BA
B 4-K Holes A C B 4-K Holes
8-S Holes AB BB
8-S Holes
F
AC L O F
GA

AG LL
G

AS LE BE

GA
D DB 2-UB

G
T D DB
BC
FIG.3 FIG.4
AD
HE

EF EB
N
P

EG
E
M
H
HA

AA AA LA BA BA
A C B(355M) 6-K Holes
AB B(355L)
8-K Holes BB
F
GA
G

D DB FIG.5
Dimension in mm

SHAFT EXTENSION BEARING

BC BE C H HA HE K L LL O UB DRIVE OPPOSITE
D E EB EF EG F G GA DB
END DRIVE END
48 119 190 280 35 367 24 1037.5 255 140 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3
48 119 190 280 35 367 24 1037.5 255 140 M63x1.5 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3
48 119 190 280 35 367 24 1087.5 255 140 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3
48 119 190 280 35 367 24 1087.5 255 140 M63x1.5 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6316C3
53 140 216 315 35 430 28 1216 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3
53 140 216 315 35 430 28 1246 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

53 140 216 315 35 430 28 1266 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

53 140 216 315 35 430 28 1296 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

53 140 216 315 45 430 28 1366 322 180 M63x1.5 65 140 125 7.5 40 18 58 69 M20 6316C3 6314C3

53 140 216 315 45 430 28 1396 322 180 M63x1.5 80 170 160 5 40 22 71 85 M20 6320C3 6316C3

68 180 216 315 45 485 28 1674 372 200 M72x2 75 140 125 7.5 40 20 67.5 79.5 M20 6316C3 6316C3

68 180 216 315 45 485 28 1704 372 200 M72x2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3

48 180 254 355 45 540 28 1575 372 230 M72x2 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6318C3
48 180 254 355 45 540 28 1605 372 230 M72x2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3
48 180 254 355 45 540 28 1575 372 230 M72x2 75 140 125 7.5 40 20 67.5 79.5 M20 6318C3 6318C3
48 180 254 355 45 540 28 1605 372 230 M72x2 95 170 160 5 48 25 86 100 M24 6322C3 6322C3

Note: 4. Tolerance of Key Width F: h9

5. Output in the Brackets for Optional Matching

page 19
IE 3

BASIC SPECIFICATION-AESV3W, AESU3W

Kind of Motors Squirrel - Cage Induction Motors ( SCIM ) .

Design Standards IEC 60034-1, IEC 60072-1

Voltages 400V, 460V or others

Frequency 50Hz or 60Hz or other

Output Range 0.55 kW ~ 315 kW ( 50Hz ) 0.55 kW ~ 335 kW ( 60Hz )

R.P.M. (Syn.) 3000 ~ 1000 R.P.M. ( 2 ~ 6 Poles ) or 3600 ~ 1200 R.P.M. ( 2 ~ 6 Poles ) .
RATING

Time Duty Continuous. S1 , S.F.1.0 at 50Hz ( S.F.1.15 at 60Hz ) .

Frame Nos. 80M ~ 355L (50Hz) 80M ~ 315D (60Hz)

Protection Enclosure Totally Enclosed ( IP 55 ) ( Do Not Add Finishing Varnish W188R ) .

Cooling Method Self External Fan, Surface Cooling ( IC 411 ) .

Horizontal Foot Mounted B3 ( IM 1001 ) .

Horizontal Flange Mounted B5 ( IM 3001 ) .
Mounting
Horizontal Foot and Flange Mounted B35 ( IM 2001 ) .
Vertical Flange Mounted, Shaft Down V1 ( IM 3011 ) .

Place : Shadow, Non-Hazardous. Ambient Temperature-15 ~ 40 .

Environment Conditions Relative HumidityLess Than 90%RH ( Non-Condensation ) .
AltitudeLess Than 1,000 Meters .
APPLICATION

Voltage10%, Frequency5%, and 10% Max. of Combined Voltage and Frequency. But
Power Source Conditions
Frequency Variation Does Not Exceed 5% .

Method of Starting Full Voltage Direct on Line or Y - Starting .

Drive Method Belt Service , However , 2 Pole 45 kW and Up Coupling Service is The Way .

Direction of Rotation CW According to IEC Definition, Suitable for Bi - Directional Operation .

Bracket Mounting , Vacuum De - Gassed High Quality Open Bearings for Frame Nos. 250M ~
Bearing
355L, Grease Pre - Packed Shielded Rolling Bearings for The Others .

Lead Terminal 6 Leads, with Solderless Lug Terminals .

CONSTRUCTION

Cast iron, With Terminal Board, Can be Rotated Each 90 With Conduit Hole for Cable
Terminal Box Entrance . The Terminal Box is Usually Placed on The Top of The Frame and The Cables
Could be Let Out from Four Possible Directions .
Stator Insulation Class F Insulation System .

Phenolic Rust Proof Base Plus Lacquer Surface Finished Painting in Purple - Blue Color (
Painting
Munsell 5PB 3/8 ) .

Bolt Thread ISO Metric System . ( Strength Category 4.6T, But F#280 and Above 8.8T ) .

Bolt Thread ISO Metric System . ( Strength Category 4.6T, But F#280 and Above 8.8T ) .

IEC 60034-2-1:2007, ANSI / IEEE Standard 112 method B And Full Voltage Measuring Starting
Test Procedure
Performance .
PERFORMANCE

Not to Exceed 80 Rise by Resistance Method at S.F 1.0 ( 50Hz ) ,

Winding Temperature Rise
90 Rise at S.F 1.15 ( 60Hz ) .

Over Speed 120% Syn. R.P.M. for 2 Min .

Over Torque 160% Rated Torque for 15 Sec .

Vibration Shaft height / mm 80 H 132 132 < H 280 H > 280

Vibration ( r.m.s ) grade Mounting Velocity mm/s Velocity mm/s Velocity mm/s

A Free suspension 1.6 2.2 2.8

page 20
 IE 3

ELECTRICAL CHARACTERISTICS - AESV3W, AESU3W

TEFC, CLASS F, 40 AMBIENT TEMP., IEC ;GB DESIGN N CONTINUOUS DUTY, S.F. 1.0 400V/50HZ

OUTPUT EFFICIENCY POWER FACTOR CURRENT TORQUE NOISE

ROTOR SOUND APP.
FULL FRAME
FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED PULL BREAK GD2 POWER WEIGHT
LOAD NO.
kW hp LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR UP DOWN kg-m2 NO-LOAD kg
rpm
(%) (%) (%) (%) (%) (%) (A) %FLT kg-m %FLT %FLT %FLT dB(A)

1430 80M 79.0 77.9 74.7 69.0 58.5 44.5 1.46 9 0.374 300 270 320 0.010 66 17.5
0.55 0.75
905 80M 70.0 69.7 66.2 69.0 58.0 44.5 1.64 6 0.591 210 195 250 0.012 63 19.5

2875 80M 80.7 78.3 75.1 84.5 78.0 66.5 1.59 12 0.254 280 275 335 0.006 78 18.0

0.75 1 1410 80M 82.5 81.8 79.7 73.5 64.0 50.0 1.79 11 0.518 315 290 335 0.013 66 20.5

935 90S 78.9 80.6 79.4 71.0 62.5 49.0 1.93 9 0.780 210 190 250 0.022 63 28.0

2870 80M 82.7 83.0 81.3 85.0 78.5 66.5 2.26 18 0.373 300 295 350 0.007 78 19.5

1.1 1.5 1430 90S 84.1 84.4 83.2 79.5 71.5 57.5 2.37 17 0.748 255 205 300 0.019 66 26.5

930 90L 81.0 81.2 80.5 72.0 63.5 50.0 2.72 13 1.151 210 185 240 0.026 63 30.5

2850 90S 84.2 85.4 85.8 90.5 87.0 78.0 2.84 22 0.512 220 210 300 0.012 78 25.5

1.5 2 1435 90L 85.3 84.1 82.2 75.0 65.5 51.5 3.38 26 1.017 300 235 335 0.023 66 28.5

950 100L 82.5 82.9 81.5 72.5 65.0 52.0 3.62 18 1.536 210 175 250 0.058 64 43.5

2860 90L 85.9 86.7 86.8 89.5 85.0 75.5 4.13 35 0.748 245 235 315 0.014 78 29.0

2.2 3 1450 100L 86.7 87.3 86.9 81.0 73.5 60.5 4.52 33 1.476 210 160 300 0.045 70 39.5

960 112M 84.3 84.3 82.2 67.0 59.0 47.0 5.62 29 2.230 190 180 280 0.083 70 53.5

2855 100L 87.1 88.3 88.4 90.0 86.5 78.5 5.52 48 1.022 325 310 355 0.025 82 41.5

3 4 1455 100L 87.7 87.7 86.2 78.0 70.5 57.5 6.33 49 2.006 250 240 335 0.052 70 42.0

970 132S 85.6 86.1 85.1 79.5 73.0 60.0 6.36 41 3.009 195 170 300 0.154 73 75.0

2875 112M 88.1 89.0 88.9 91.0 87.5 80.0 7.20 69 1.354 270 250 360 0.046 83 51.5

4 5.5 1445 112M 88.6 88.4 87.9 82.0 76.5 65.5 7.95 57 2.693 245 205 300 0.083 72 53.0

970 132M 86.8 87.2 86.3 79.5 72.5 60.0 8.37 57 4.012 200 185 310 0.205 73 91.5

2930 132S 89.2 89.8 89.5 88.5 86.0 79.5 10.1 80 1.826 210 205 340 0.075 85 73.0

5.5 7.5 1455 132S 89.6 90.4 90.3 85.0 80.5 70.0 10.4 77 3.678 240 200 300 0.132 75 75.5

970 132M 88.0 88.0 86.2 73.5 65.5 52.0 12.3 88 5.517 210 205 345 0.216 73 91.0

2920 132S 90.1 90.9 90.8 87.0 84.5 77.5 13.8 100 2.499 210 195 315 0.081 85 76.0

7.5 10 1460 132M 90.4 90.8 90.4 84.5 79.5 69.0 14.2 110 4.998 270 225 330 0.172 75 93.0

970 160M 89.1 90.0 89.0 79.0 73.0 61.0 15.4 110 7.523 235 210 300 0.483 73 135

2935 160M 91.2 92.0 92.0 90.0 89.0 83.5 19.3 150 3.647 230 185 300 0.183 87 130

11 15 1460 160M 91.4 92.0 91.5 84.0 80.0 70.0 20.7 160 7.331 230 185 300 0.366 77 130

970 160L 90.3 91.0 90.5 78.0 72.0 60.5 22.5 170 11.03 295 255 300 0.628 73 150

2935 160M 91.9 92.0 92.0 89.0 85.5 77.5 26.5 230 4.973 275 230 330 0.205 87 130

15 20 1460 160L 92.1 92.5 92.5 84.5 81.0 71.0 27.8 225 9.997 250 195 300 0.460 77 150

970 180L 91.2 92.0 92.0 82.0 78.0 68.0 29.0 200 15.05 215 165 255 1.337 77 205

2930 160L 92.4 93.0 93.0 90.0 89.5 84.0 32.1 260 6.144 245 200 300 0.237 87 140

18.5 25 1475 180M 92.6 94.0 93.0 81.5 77.0 69.5 35.4 270 12.20 215 160 280 0.704 80 195

975 200L 91.7 92.5 92.5 80.5 76.0 66.5 36.2 260 18.46 220 185 265 1.829 80 270

2940 180M 92.7 92.7 92.5 87.0 85.0 77.0 39.4 300 7.281 225 180 300 0.283 88 180

22 30 1475 180L 93.0 93.5 93.0 81.0 77.0 71.0 42.2 315 14.51 210 145 275 0.789 80 205

975 200L 92.2 93.0 93.5 81.5 77.0 68.0 42.3 305 21.95 210 185 265 2.078 80 290

page 21
IE 3

ELECTRICAL CHARACTERISTICS - AESV3W, AESU3W

TEFC, CLASS F, 40 AMBIENT TEMP., IEC ;GB DESIGN N CONTINUOUS DUTY, S.F. 1.0 400V/50HZ
OUTPUT EFFICIENCY POWER FACTOR CURRENT TORQUE NOISE
ROTOR SOUND APP.
FULL FRAME FULL 3/4 1/2 FULL 3/4 1/2 FULL LOCKED FULL LOCKED PULL BREAK GD2 POWER WEIGHT
kW hp LOAD NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR UP DOWN kg-m2 NO-LOAD kg
rpm (%) (%) (%) (%) (%) (%) (A) %FLT kg-m %FLT %FLT %FLT dB(A)
2950 200L 93.3 93.5 92.5 90.0 90.0 86.5 51.6 400 9.895 200 145 300 0.602 90 265
30 40 1470 200L 93.6 94.5 94.5 86.0 84.5 77.0 53.8 445 19.86 250 205 300 1.451 83 285
980 225M 92.9 93.5 93.5 83.5 80.0 76.5 55.8 335 29.79 210 160 240 3.023 80 385
2955 200L 93.7 94.5 94.0 91.0 90.5 87.0 62.6 510 12.18 210 145 300 0.753 90 300
37 50 1480 225S 93.9 94.5 94.0 85.5 82.0 73.0 66.5 505 24.33 210 175 300 1.896 84 350
980 250M 93.3 94.0 94.0 85.0 81.5 75.0 67.3 490 36.74 230 200 280 4.194 82 460
2960 225M 94.0 94.0 93.5 91.0 91.0 88.0 75.9 615 14.79 170 140 300 1.187 92 340
45 60 1480 225M 94.2 94.5 94.0 84.5 79.5 70.0 81.6 600 29.58 210 175 300 1.979 84 360
980 280S 93.7 93.7 93.0 85.0 82.0 73.5 81.6 530 44.75 180 160 280 6.400 85 600
2970 250M 94.3 94.5 94.0 91.5 90.0 86.5 92.0 735 18.02 165 130 315 1.544 92 465
55 75 1485 250M 94.6 94.6 94.0 87.5 84.5 77.0 95.9 750 36.04 210 185 295 3.911 85 480
980 280M 94.1 94.0 93.5 84.5 81.0 71.0 99.8 689 54.69 190 160 270 7.600 85 660
2965 280S 94.7 94.5 93.0 89.0 87.0 80.0 128 962 24.6 190 160 270 2.000 94 585
75 100 1480 280S 95.0 95.0 94.2 87.5 84.5 77.0 130 910 49.4 190 160 270 5.200 88 620
985 315S 94.6 94.5 93.7 84.5 81.5 73.0 135 900 74.2 160 135 240 11.20 89 900
2970 280M 95.0 95.0 94.4 89.5 87.0 80.0 153 1200 29.5 200 170 280 2.400 94 615
90 125 1480 280M 95.2 95.2 94.8 88.5 87.0 81.0 154 1100 59.3 190 160 270 6.400 88 690
985 315M 94.9 94.9 94.2 84.5 81.5 73.0 162 1040 89.0 160 130 250 13.60 89 960
2970 315S 95.2 95.0 94.3 90.0 89.0 84.0 185 1430 36.1 180 150 270 4.000 98 860
110 150 1482 315S 95.4 95.2 94.8 88.0 85.5 77.5 189 1375 72.3 180 150 280 8.80 94 960
985 315L 95.1 95.1 94.6 84.5 82.0 73.0 198 1364 108.8 200 170 260 18.80 89 1,160
2970 315M 95.4 95.2 94.8 91.0 90.5 88.0 219 1591 43.3 180 135 240 5.200 98 980
132 175 1480 315M 95.6 95.5 94.8 88.0 86.0 78.0 226 1627 86.9 200 170 270 10.00 94 1,000
985 315L 95.4 95.4 95.0 84.5 81.0 72.0 236 1560 130.6 200 170 260 18.00 89 1,200
2970 315L 95.6 95.2 94.5 91.0 90.0 89.0 265 2060 52.5 200 170 250 6.400 98 1,075
160 215 1485 315L 95.8 95.6 95.0 88.5 87.0 80.0 272 2150 105.0 190 160 280 11.60 94 1,090
985 355M 95.6 95.5 95.0 86.0 84.5 76.0 281 2020 158.3 160 140 270 38.40 94 1,870
2970 315L 95.8 95.6 94.6 91.5 91.0 90.0 329 2550 65.6 200 170 260 7.600 98 1,260
200 270 1485 315L 96.0 95.8 95.0 87.0 84.0 76.0 346 2635 131.2 160 140 260 14.80 94 1,300
985 355M 95.8 95.5 94.6 85.0 83.0 77.5 355 2450 197.9 150 125 250 40.40 94 2,100
2975 355M 95.8 95.6 94.6 91.0 90.0 86.0 414 2950 81.9 140 115 270 11.60 89 1,800
250 335 1485 355M 96.0 95.8 95.0 89.0 88.0 84.5 422 2900 164.1 140 115 260 27.20 95 1,925
985 355L 95.8 95.6 94.8 85.5 83.0 73.0 441 3271 247.3 180 150 280 46.00 94 2,090
2975 355L 95.8 95.6 94.7 91.5 91.0 89.0 519 3600 103.2 140 115 280 16.00 100 2,140
315 420
1485 355L 96.0 96.0 95.4 89.0 88.0 84.5 532 3870 206.7 150 130 260 34.00 95 2,160

NOTE: 1. The above are typical values based on test according to IEC 60034-2-1:2007.
2. Tolerance according to IEC 60034-1.
3. Breakdown & Locked rotor torques are show as average expected voltages.
4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely
with voltage.
5. 0.55 kW and below : Efficiency per TECO performance standard ( Not IE3 ).
6. Noise : sound power level at no - load, dB(A), Tolerance + 3 dB(A)
7. Data subject to change without notice.

page 22
 IE 3

ELECTRICAL CHARACTERISTICS - AESV3W, AESU3W

TEFC, CLASS F, 40 AMBIENT TEMP., IEC ;GB DESIGN N CONTINUOUS DUTY, S.F. 1.15 460V/60HZ
OUTPUT EFFICIENCY POWER FACTOR CURRENT TORQUE
ROTOR
FULL FRAME FULL 3/4 1/2 1/4 FULL 3/4 2/4 1/4 FULL LOCKED FULL LOCKED PULL BREAK GD2
hp kW LOAD NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR UP DOWN kg-m2
rpm (%) (%) (%) (%) (%) (%) (%) (%) (A) (A) Nm %FLT %FLT %FLT

1735 80M 80.0 79.0 75.2 62.9 69.5 60.0 46.5 29.5 1.24 9 3.027 330 300 365 0.010
0.75 0.55
1120 80M 77.0 77.7 74.9 62.9 64.0 54.0 41.5 25.5 1.40 6 4.690 235 230 240 0.012

3490 80M 77.0 75.6 71.5 60.3 84.0 77.5 66.0 47.5 1.46 12 2.052 310 300 390 0.006

1 0.75 1730 80M 85.5 85.0 82.4 74.2 74.5 65.5 52.0 30.0 1.48 11 4.140 345 340 385 0.013

1140 90S 82.5 83.4 81.9 71.6 70.0 61.5 48.0 30.0 1.63 9 6.283 205 175 235 0.022

3485 80M 84.0 83.9 81.4 73.6 85.0 78.5 66.5 45.5 1.93 17 3.014 340 325 385 0.007

1.5 1.1 1735 90S 86.5 87.3 86.3 80.0 81.0 74.0 61.5 39.0 1.97 15 6.055 250 200 315 0.019

1175 112M(*) 87.5 86.8 83.9 75.8 64.0 56.0 44.0 27.5 2.47 17 8.940 210 190 350 0.053

3460 90S 85.5 86.5 86.0 80.6 89.5 85.5 76.5 56.0 2.46 21 4.140 240 225 300 0.012

2 1.5 1740 90L 86.5 86.2 84.1 76.5 75.0 66.5 52.5 33.0 2.90 23 8.233 295 225 345 0.023

1165 112M(*) 88.5 88.5 87.1 80.6 69.0 62.0 50.5 32.0 3.08 18 12.30 170 150 270 0.071

3745 90L 86.5 87.2 86.7 81.5 89.0 84.5 75.0 55.0 3.59 34 5.610 270 255 330 0.014

3 2.2 1760 100L 89.5 89.4 88.5 82.2 83.5 78.0 66.0 42.0 3.69 33 11.94 210 205 330 0.045

1170 112M 89.5 89.1 87.3 80.3 67.5 60.0 48.0 29.5 4.09 35 17.96 170 165 290 0.084

3505 100L 88.5 89.0 89.0 84.2 88.0 83.5 74.0 53.0 4.83 43 8.174 230 225 380 0.025

4 3 1760 100L 89.5 89.0 87.4 80.4 78.5 71.5 59.0 38.0 5.36 46 16.28 240 235 360 0.052

1170 132S 89.5 88.7 86.6 78.8 78.5 71.5 59.0 37.5 5.36 39 24.49 195 190 315 0.137

3490 112M 88.5 89.0 88.5 84.3 91.0 88.0 80.5 61.0 6.23 62 10.95 265 260 335 0.046

5.5 4 1750 112M 89.5 89.9 89.1 84.0 81.5 76.5 65.5 44.0 6.88 53 21.83 230 180 295 0.083

1170 132M 89.5 89.4 87.7 80.7 79.5 73.0 61.0 39.5 7.06 52 32.65 190 185 305 0.182

3535 132S 89.5 88.7 86.6 78.7 86.5 83.5 76.0 58.0 8.92 75 14.86 215 210 310 0.066

7.5 5.5 1755 132S 91.7 92.1 91.8 87.7 85.0 80.5 71.0 48.5 8.86 71 29.93 260 220 330 0.132

1175 132M 91.0 90.3 88.3 82.1 74.5 65.0 51.0 31.0 10.2 76 44.70 205 190 350 0.216

3525 132S 90.2 90.6 89.9 85.8 87.5 85.0 78.5 60.5 11.9 89 20.32 200 195 285 0.081

10 7.5 1755 132M 91.7 92.3 92.1 88.7 85.5 81.5 72.5 50.0 12.0 91 40.81 255 220 310 0.152

1170 160M 91.0 91.2 90.3 84.9 81.5 77.0 67.0 44.5 12.7 106 61.22 300 240 320 0.483

3530 160M 91.0 91.0 90.2 84.1 92.5 91.0 87.5 72.5 16.4 130 29.76 255 195 300 0.154

15 11 1770 160M 92.4 92.7 92.1 88.2 87.0 83.0 73.5 51.0 17.2 132 59.35 240 175 290 0.366

1165 160L 91.7 91.8 90.9 85.8 81.5 77.0 67.5 45.0 18.5 153 90.17 300 240 305 0.628

3550 160M 91.0 91.1 90.1 84.4 92.5 90.5 86.0 71.5 22.4 206 40.35 245 220 330 0.205

20 15 1770 160L 93.0 93.1 92.6 88.8 86.5 82.0 72.5 51.0 23.4 186 80.93 265 195 310 0.460

1170 180L 91.7 92.4 92.6 89.7 83.0 79.5 71.5 49.5 24.7 180 122.4 245 215 270 1.337

3550 160L 91.7 92.0 91.3 86.5 93.0 91.5 87.5 73.5 27.2 251 49.77 250 225 320 0.256

25 18.5 1770 180M 93.6 94.0 93.5 90.1 82.5 79.0 70.0 49.0 30.1 231 99.82 220 180 250 0.704

1175 200L 93.0 93.2 93.1 89.7 82.0 78.5 70.0 48.0 30.4 215 150.4 245 215 255 1.829

3545 180M 91.7 91.7 90.9 86.4 90.0 88.0 83.5 66.5 32.0 274 59.27 270 210 330 0.283

30 22 1775 180L 93.6 93.8 93.4 90.1 84.0 81.0 73.5 53.0 33.6 272 118.4 225 180 245 0.789

1175 200L 93.0 93.5 93.3 90.4 82.0 78.5 70.5 49.0 34.6 280 178.8 230 215 240 2.078

page 23
IE 3

ELECTRICAL CHARACTERISTICS - AESV3W, AESU3W

TEFC, CLASS F, 40 AMBIENT TEMP., IEC ;GB DESIGN N CONTINUOUS DUTY, S.F. 1.15 460V/60HZ

OUTPUT EFFICIENCY POWER FACTOR CURRENT TORQUE

FULL ROTOR
FRAME FULL 3/4 2/4 1/4 FULL 3/4 2/4 1/4 FULL LOCKED FULL LOCKED PULL BREAK
LOAD GD2
hp kW NO. LOAD LOAD LOAD LOAD LOAD LOAD LOAD LOAD LOAD ROTOR LOAD ROTOR UP DOWN
rpm kg-m2
(%) (%) (%) (%) (%) (%) (%) (%) (A) (A) Nm %FLT %FLT %FLT
3545 200L 92.4 92.4 91.6 86.3 91.0 90.5 88.0 75.5 42.8 350 80.82 210 150 270 0.602
40 30 1775 200L 94.1 94.4 94.4 91.1 89.5 87.5 82.0 63.0 42.8 359 161.4 200 190 265 1.451
1180 225M 94.1 94.4 94.1 91.4 86.5 85.0 78.0 59.0 44.2 297 242.8 205 160 210 3.023
3550 200L 93.0 93.1 92.6 88.1 91.0 91.5 91.0 80.0 52.5 447 99.54 200 155 275 0.753
50 37 1775 225S 94.5 94.5 93.8 89.9 86.5 83.5 76.0 54.5 54.3 447 199.1 200 180 250 1.896
1185 250M 94.1 94.1 93.7 90.5 88.0 86.0 79.5 59.5 53.6 437 298.2 230 155 250 4.194
3570 225M 93.6 93.4 92.3 87.2 93.5 93.0 90.5 78.5 61.7 494 120.4 170 140 300 1.187
60 45 1775 225M 95.0 94.9 94.3 91.0 86.5 83.5 76.5 54.5 65.7 490 242.1 215 195 235 1.979
1185 280S 94.5 94.5 93.5 90.0 85.5 81.5 72.0 50.0 69.5 519 360.7 190 160 280 6.400
3565 250M 93.6 93.8 93.3 90.4 93.0 92.0 89.0 76.5 75.9 693 147.3 200 160 295 1.544
75 55 1785 250M 95.4 95.2 94.3 90.5 88.0 85.5 78.0 58.0 78.7 668 294.3 230 205 275 3.911
1185 280M 94.5 94.5 94.0 91.0 84.5 80.5 71.0 50.0 87.9 680 450.9 220 190 280 7.600
3570 280S 94.1 94.4 93.2 89.2 89.5 86.5 79.0 58.0 111 955 199.6 200 170 280 2.000
100 75 1785 280S 95.4 95.0 94.0 91.0 87.5 85.5 78.0 56.0 112 885 399.1 180 150 280 5.200
1188 315S 95.0 95.0 94.5 92.0 84.0 80.0 70.0 47.0 117 860 599.7 180 150 270 11.20
3570 280M 95.0 94.7 94.0 90.0 89.5 86.5 80.0 57.0 138 1195 249.5 200 170 280 2.400
125 90 1785 280M 95.4 95.4 95.0 93.0 88.5 87.5 80.5 60.0 139 1100 498.9 200 170 280 6.400
1188 315M 95.0 95.0 94.3 91.5 84.5 81.5 72.0 50.0 146 1030 749.6 160 135 270 13.60
3572 315S 95.0 94.4 92.5 87.5 91.0 89.5 84.0 65.0 162 1350 299.2 145 120 280 4.000
150 110 1785 315S 95.8 95.4 94.5 91.0 88.0 86.0 80.0 59.0 167 1500 598.7 200 170 280 8.800
1188 315M 95.8 95.8 95.4 93.0 84.5 81.5 72.0 49.0 173 1290 899.5 180 150 250 16.40
3575 315M 95.4 95.0 94.0 90.0 92.0 91.0 88.0 75.0 213 1735 398.6 150 125 280 5.800
200 150 1785 315M 96.2 95.8 95.2 93.0 88.5 86.5 81.0 60.0 220 2000 798.2 200 170 280 10.40
1188 315L 95.8 95.6 95.2 93.2 86.5 84.5 77.0 56.0 226 1650 1199 200 170 250 22.00
3575 315L 95.8 95.4 94.5 91.5 92.5 91.5 89.5 78.5 264 2180 498.2 160 135 280 6.200
250 185 1785 315L 96.2 95.9 95.3 93.5 89.0 87.5 81.5 61.5 273 2400 998 200 170 280 12.40
1190 315D 95.8 95.6 95.2 93.5 86.5 84.5 78.0 58.0 282 2150 1497 200 170 250 34.80
3575 315L 95.8 95.4 94.5 91.5 92.5 91.5 89.5 78.5 317 2580 597.8 160 135 280 7.40
300 224 1785 315L 96.2 96.0 95.4 93.6 89.5 88.0 83.5 64.0 326 2760 1197 200 170 280 13.60
1190 315D 95.8 95.6 95.2 94.0 87.0 84.5 77.5 58.5 337 2580 1796 200 170 250 40.40
3575 315D 95.8 95.4 94.3 90.5 92.0 91.0 87.0 72.0 372 2800 697.5 140 120 280 12.40
350 261 1785 315D 96.2 96.0 95.4 93.0 90.0 88.5 83.5 64.0 379 2800 1397 150 125 280 27.20
1190 315D 95.8 95.6 95.2 94.0 87.0 85.5 79.0 60.0 393 2850 2095 200 170 250 44.80
3575 315D 95.8 95.4 94.3 90.5 92.0 91.0 88.0 72.0 425 3350 797.1 155 130 280 14.40
400 298
1785 315D 96.2 96.0 95.4 93.0 90.5 89.0 84.0 65.0 430 3320 1596 160 135 280 31.20
3575 315D 95.8 95.4 94.5 91.0 92.5 91.5 88.5 72.5 475 3750 896.8 160 135 280 16.00
450 335
1785 315D 96.2 96.0 95.0 93.0 90.5 89.0 84.0 65.0 484 3800 1796 160 135 280 34.00

NOTE: 1. The above are typical values based on test accord to ANSI / IEEE standard 112 method B.
2. Tolerance according to NEMA MG1-12& IEC 60034-1.
3. Breakdown & Locked rotor torques are show as average expected voltages.
4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely
with voltage.
5. 0.55 kW and below : Efficiency per TECO performance standard.
6. (*)6p 1.11.5KW Frame size assignment per TECO performance standard.
7. F#315D : only suitable for IM B3 and IM B35
8. Data subject to change without notice.

page 24
SPECIFICATION REQUIREMENTS
I. BASIC REQUIREMENT

OUTPUT HP KW

POLE 2P 4P 6P 8P OTHER P

FREQUENCY 50Hz 60Hz OTHER Hz

VOLTAGE VOLTS

IEC NEMA GB
STANDARD
TECO STD OTHER

IE1 IE2 IE3

GB3 GB2 GB1
EFFICIENCY
MEPS NEMA-PREMIUM
OTHER

INSULATION F H OTHER

TEMP. RISE B(80K) F(105K) OTHER

S.F. 1.0 1.1 1.15 OTHER

ENCLOSURE &
IP TEFC ODP OTHER
PROTECTION

HORIZONTAL VERTICAL
MOUNTING TYPE
FOOT FLANGE OTHER

COOLING METHOD IC410 IC411 IC416 IC01 OTHER

STARTING METHOD DOL VFD -

DRIVE METHOD DIRECT BELT OTHER

II. ENVIRONMENT REQUIREMENT

ENVIRONMENT INDOOR OUTDOOR COVER CORROSION

AMBIENT TEMP. STD(-15 ~40 ) OTHER

ALTITUDE 1000m OTHER

HUMIDITY 90%RH OTHER

FAN(BLOWER) PUMP
LOAD
COMPRESSOR OTHER OTHER

III. OTHER REQUIREMENT

page 25
HEAD OFFICE EGYPT
TECO Electric & Machinery Co., Ltd Amosl & Co. Wuxi Teco Electric & Machinery Co., Ltd
1OF No,3-1, Yuan Cyu st. 38 Mossadak Street Dokki, Giza, Egypt No. 9 South of Changjiang Road,
Nan-kang Taipei 115 Tel: +202 333 79 744 New Zone, Wuxi
Taiwan ROC Fax: +202 376 20 307 Jiangsu Province, P.R.C.
TEL: +886 2 6615 9111 Tel: +86 510 8534 2005
www.teco.com.tw/fa TUNISIA and ALGERIA Fax: +86 510 8534 2001
AFRICA COMPANY www.wuxiteco.com
UNITED STATES Route de Tunis km 1,
TECO-Westinghouse Motor Company rue Hassan hosni Abdelwaheb - Imm Dammak, Jiangxi Teco Electric & Machinery Co., Ltd
5100 N IH-35 Mezzanine Sfax 3002 - Tunisia 189 Dongyuan Rd. Hi-Tech Zone, Nanchang
Round Rock Texas 78681 USA Tel: +216-74436585, +216-74436585 Jiangxi Province, P.R.C.
Tel: +1 512 225 4141 Fax: +216-74436587 Tel: +86 791 819 5999
+1 800 451 8798 Fax: +86 791 816 7730
Fax: +1 512 244 5512 TURKEY
Toll Free: +1 800 451 8798 TECO Elektrik Turkey A.S. SUZHOU TECO Electric & Machinery Co., Ltd
www.tecowestinghouse.com Yesilkoy Mah. Ataturk Caddesi No:12/1 No.1 Changjiang W.Rd.
EGS Business Park; B1 Blok 3. Kat; Daire No: 173- South-Dam Industrial Park,
CANADA 174 Liuhe Town,Taicang City,
TECO-Westinghouse Motors Inc. (Canada) 34149 - Bakirkoy/ Istanbul TURKEY Suzhou,Jiangsu Province, P.R.C.
18060-109 Avenue, Edmonton, Alberta Phone: +90 212 465 4540 Tel: +86 512 5361 9901
T5S 2K2 Canada Fax: +90 212 465 4599 Fax: +86 512 5396 1058
Tel: +1 (780) 444 8933 Mobile: +90 553 461 4848
Fax: +1 (780) 486 4575 FUJIAN TECO PRECISION CO.,LTD
24 HR Emergency ph: SOUTH AFRICA Xiayang, Jizhao, Zhanggang village,
+1 (780) 994 8964 TECO Electric & Machinery Co. Ltd Saiqi Economical & Development Zone,
Toll Free: +1 800 661 4023 E-mail: [email protected] Fuan, Fujian, P.R.C.
Fax Toll Free: +1 888 USE TWMI TEL: +86 593 633 0300
E-mail:[email protected] AUSTRALIA FAX: +86 593 633 0303
www.twmi.com Teco Australia Pty Ltd.
335-337 Woodpark Road HONG KONG
MEXICO Smithfield NSW 2164 Australia Tecoson Industrail Development
TECO Westinghouse Motor Company Tel: +61 2 9765 8118 (HK) Co., Ltd
S.A. de C.V. Fax: 61-2-9604-9330 Rm 3712 Hong Kong Plaza
Circuito Mexiamora Poniente No. 321 E-mail:[email protected] 186-191 Connaught Rd. West
Col. Puerto Interior, www.teco.com.au Hong Kong
Parque Santa Fe CP 36275 Tel: +852 2858 3220
Silao, Guanajuato., Mxico NEW ZEALAND E-mail: [email protected]
Tel: +52 (472) 748 9016 al 20 Teco New Zealand Pty Ltd.
E-mail:[email protected] Unit 3, 477 Great South Road MALAYSIA
Penrose Auckland New Zealand Plo 52, Jalan Firma 2/1,
NETHERLANDS Tel: +64 9 526 8480 Kawasan Perindustrian Tebrau 1,
Teco Electric & Machinery B.V. Fax: 64 9-526-8484 81100 Johor Bahru, Johor, Malaysia
Riviun 3e Straat 17 E-mail:[email protected] Tel: (60) 7-3518862 / (60) 7-3548008
2909 LH Capelle a/d IJssel Fax: (60) 7-3546107
The Netherlands JAPAN E-mail: [email protected]
Tel: +31 (0)10 266 6633 Sankyo Co., Ltd.
Fax: +31 (0) 10 202 6415 26th fl. World Trading Center Bidg. THAILAND
E-mail:[email protected] 2-4-1 Hamamatsucho Minato-ku Teco Electric & Machinery
www.teco-group.eu Tokyo Japan 105-6126 (Thai) Co., Ltd.
Tel: +81 3 3435 9729 128/1 Soi Watsrivareenoi
UNITED KINGDOM Fax: +81 3 3578 8381 Moo 7 Bangna-Trad Road Km 18
TECO ELECTRIC EUROPE LTD E-mail:[email protected] Bangchalong Bangplee
7 Dakota Avenue, Salford M50 2PU Website:www.teco-japan.com Samuthprakarn 10540 Thailand
United Kingdom Tel: +662-3371311-20
Tel: +44 161 877 8025 SINGAPORE Fax: +662-337-1630-1
Fax: +44 161 877 8030 Teco Electric & Machinery(PTE)Ltd.
www.teco-group.eu 18 chin Bee Drive VIETNAM
Singapore 619865 Teco (Vietnam) Electric & Machinery Co.,Ltd.
MIDDLE EAST Tel: +65 6 265 4622 KON LONG Thanh,Huyen Long Thanh
Teco Middle East Electric & Machinery Co., Ltd. E-mail:[email protected] Tinh Dong Nai. Vietnam
2nd Industrial City, Dammam www.teco.com.sg Tel: +84 61 3514151
PO Box #708, Dammam 31421 Fax: +84 61 351 4110
Kingdom of Saudi Arabia INDONESIA
Tel: +966 3 812 3939 P.T. Teco Multiguna Elektro PHILIPPINES
Fax: +966 3 812 4823 JL Bandengan Utara No. 83/1-2-3 Taian(Subic) Electric, Inc.
Email: [email protected] Jakarta Utara-14440 Indonesia Phase 1 Industrial Park Argonaut Highway corner
Tel: +62 21 662 2201 Braveheart St Subic Bay Freeport Zone -2222-
SAUDI ARABIA Fax: 62-21-6697029 Philippines
AI Quraishi Electrical Services of S.A. Tel: +63-47-252-1668/252-1669
AI Quraishi Center, King Khalid Street, INDIA Fax:+63-47-252-3234
P.O.Box 7386, Dammam-31462 TECO Electric & Machinery Co., Ltd. E-mail: [email protected]
Tel: +966 3 857-2537 New Delhi Office http://taiansubic.com/
Fax: +966 3 857-2541 Phone: 91-11-22314654
Email :[email protected] Mobile: 91-9873390999 Trade One, Incorporated
www.aqesa.com Contact: Vijay Sankar No. 56 Aragon Street San Francisco
E-mail:[email protected] Del Monte 1100 Quezon City Metro Manila,
IRAN, AZERBAIJAN & ARMENIA Philippines
ATLAS DIBA Engineering & Trade Co. CHINA Tel: (632) 371-3032
No.3, Fakouri St., South Kadj Ave. Shanghai Office Fax: (632) 371-1175
Golha Sq., Fatemi, Tehran, Iran Rm 321 Building No.6 www.tradeoneinc.com
Tel: +98 21 88 33 03 81-3 Lane 1279 Zhongshan W. Rd.
Fax: +98 21 88 33 03 84 Shanghai, P.R.C
Email :[email protected] Tel: +86 21 5116 8255
www.atlasdibaco.com Fax: +86 21 6278 8761

JUN. 14/TA-6301