Scribd
Upload
153 views1 page

Insulating Brick Example

This document provides specifications for an insulating brick called ISOLMOS 450 made by Mosconi S.r.l. The brick has a density of 425 kg/m3, maximum service temperature of 900°C, and very low thermal conductivity between 0.10 and 0.14 W/mK depending on the mean temperature. It has high refractoriness up to 1140°C and contains silica, alumina, and other oxides that give it insulating properties for high temperature applications.

Uploaded by

psaayo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views1 page

Insulating Brick Example

This document provides specifications for an insulating brick called ISOLMOS 450 made by Mosconi S.r.l. The brick has a density of 425 kg/m3, maximum service temperature of 900°C, and very low thermal conductivity between 0.10 and 0.14 W/mK depending on the mean temperature. It has high refractoriness up to 1140°C and contains silica, alumina, and other oxides that give it insulating properties for high temperature applications.

Uploaded by

psaayo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SIMILAR PRODUCT IF AVAILABLE TO SKAMOL.

SUPER INSULATING BRICK


ISOLMOS 450 ISOLMOS
Effective: January 2013 450
Classification ISO 2245 : 2006 85-L
Density ISO 5016 : 1995 Kg/m 425
Max. service temperature C 900
Cold crushing strength ISO 8895 : 2006 MPa 1.3
Linear Reheat Shrinkage ISO 2477 : 2005 % < 1.0
12h soak @ Temperature (C) 850

Thermal Conductivity ASTM C 182-88 : 2009 W/mK


Mean Temperature
200C 0.10
400C 0.12
600C 0.14
Chemical Analysis XRF %
SiO2 65.0
Al2O3 15.0
TiO2 0.5
Fe2O3 4.0
CaO 7.0
MgO 1.3
K2O 5.0
Na2O 1.1
P2O5 0.5
Thermal Expansion 20 to 750C EN 821-1 : 1995 % 0.4
Refractoriness ISO 528 : 1983 C 1140
Refractoriness Under Load, T05 ISO 1893 : 2008 C 810
Load: 0.05 MPa

Total Porosity ISO 5017 : 2013 % 82


Dimensional Tolerances
(Trimmed standard squares)
Length mm 2.0
Width mm 2.0
Thickness mm 1.5

MOSCONI S.r.l. Tel: +39-0374-79020


Villa Fornace 4 www.mosconi.com
26021 Annicco (CR), Italy [email protected]

The above physical and chemical properties of Insulating Brick represent values obtained on standard squares in accordance with
accepted test methods and are subject to normal manufacturing variations. This information is supplied as a technical service
and may change without notice. Results should not be used for specification purposes, unless agreed with seller.

Distributed by:
UNIC PRODUCTS S.r.l. www.unicproducts.com
Via Cerca 26, 20090 Caleppio di Settala (MI), Italy Tel: +39-02 9589 8184 [email protected]

Mosconi TDS eng (TRIMMED).13.06.24

You might also like