Scribd
Upload
853 views1 page

BS 8110-1 Table 3.4 Nominal Cover For Fire Resistance

table

Uploaded by

alexcus1539
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
853 views1 page

BS 8110-1 Table 3.4 Nominal Cover For Fire Resistance

table

Uploaded by

alexcus1539
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
Table 3.4 — Nominal cover to all reinforcement (including links) to meet specified periods of fire resistance (see NOTES 1 and 2) Fire registance Nominal cover Beams" Floors Ribs ‘Columns Simply | Continuous | Simply | Continuous | Simply | Continuous | supported mm supported mim supported mm 05 20° 20° 20° 20° 20° 20° 20° 1 20° 20% 20 20 20 20° 20° 16 20 20° 25 20 35 20 20 2 40 30 35 25 rey 35 5 3 60 40 a5 36 56 5 4 70 50 55 5 65 55 NOTE1 The nominal covers given relate specifically to the minimum member dimensions given in Figure 8.2, Guidance on inereased covers necessary if smaller members ave used is given in section 4 of BS 8110-2: 1986. NOTE 2. Cases that lie below the bold line vequive attention to the additional measures necessary to reduce the risks of spalling (see section 4 of BS 8110-2:1985). ® For the purposes of assessing a nominal cover for beams and columns, the cover to main bars whieh would have been obtained from Tables 4.2 and 4.3 of BS 8110-2:1985 has been reduced by a notional allowance for stirrups of 10 mm to cover the range 8 mm to 12 mm (see also 3.3.6), » These covers may be reduced to 15 mm provided that the nominal maximum size of aggregate does not exceed 15 mm (ee 8.8.1.8)

You might also like