0% found this document useful (0 votes)
145 views34 pages

Wind Load Calc

This document provides the standard method for calculating effective wind speed and wind pressures on a structure. It includes calculations for basic wind speed, altitude factors, site wind speed, terrain and building factors, and effective wind speed. It also includes calculations for dynamic pressure, external surface pressure, internal surface pressure, and critical wind pressure combinations. Tables and figures are referenced for pressure coefficients.

Uploaded by

HaymanAHMED
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
145 views34 pages

Wind Load Calc

This document provides the standard method for calculating effective wind speed and wind pressures on a structure. It includes calculations for basic wind speed, altitude factors, site wind speed, terrain and building factors, and effective wind speed. It also includes calculations for dynamic pressure, external surface pressure, internal surface pressure, and critical wind pressure combinations. Tables and figures are referenced for pressure coefficients.

Uploaded by

HaymanAHMED
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 34

STANDARD METHOD

EFFECTIVE WIND SPEED


Basic wind speed(Vb) = 28 m/s

wind pressure computation as per BS 6399-2:1997

Assumed site altitude in meters above MSL 450 m

1.45

Altitude factor(Sa) = from


from clasuse
clause 2.2.2.2(pg
2.2.2.3 no:20) of
Table 3-values
Direction factor(Sd) = 1 direction factor sd(pg no:27)
Seasonal factor(Ss) = 1 from clause 2.2.2.4(pg no:27)
Probability factor (Sp) = 1 from clause 2.2.2.5(pg no:27)

Site wind speed(Vs) = 40.6 m/s

Terrain and building factor(Sb) = 1.808 on interpolation From table 4-factor for standard method

effective
height(He
) =

closest
Ve = Vs x Sb distant to
sea
Effective wind speed(Ve) = 73.40 m/s upwind =

on
interpola
tion of He
and
distant
sea
formulae oupwind =
DYNAMIC PRESSURE(qs) = 3303.01 Pa3 qs=0.613 Vformulae
e
2
on clause 2.1.2.1

EXTERNAL SURFACE PRESSURE(pe) pe = qs x Cpe x Ca


Pressure coefficient from table 7-pg no 35
External pressure coefficients(Cpe)
for circular plan buildings
Positive External pressure = 3303.006 qs x 1 fromH =
Suction pressure = -2807.56 qs x -0.85 d =
H/d =
so H/d <=
positive co=
INTERNAL SURFACE PRESSURE(pi) pi = qs x Cpi negative
x Ca co=
Positive internal pressure = 660.6012
Suction = -990.902 Internal pressure coefficients(Cpi)
permeable=
impermeab=
Critical Wind presure Combintions

case 1 = 2642.405
case 2 = 3963.607
case 3 = -2146.95
case 4 = -3798.46
100
27.77778

e 4-factor for standard method

12 m

2 km

1.808
on clause 2.1.2.1

e 7-pg no 35
pressure coefficients(Cpe)
ar plan buildings
12 m
6.2 m
1.935484
2.5
1
-0.85

pressure coefficients(Cpi)
0.2
-0.3
Basic Parameters
Risk Category II
Basic Wind Speed, V 30.00 m/s
Wind Directionality Factor, Kd 0.85
Exposure Category C
Topographic Factor, Kzt 1.00
Gust Effect Factor, G or Gf 0.836
Enclosure Classification Enclosed
Internal Pressure Coefficient, GCpi +/- 0.18
Terrain Exposure Constant, a 9.5
Terrain Exposure Constant, zg 274.32 m

Wall Pressure Coefficients


Windward Wall Width, B 28.60 m
Side Wall Width, L 20.40 m
L/B Ratio 0.71
Windward Wall Coefficient, Cp 0.80
Leeward Wall Coefficient, Cp -0.50
Side Wall Coefficient, Cp -0.70

Roof Pressure Coefficients


Roof Slope, q 0.0
Median Roof Height, h 42.60 m
Velocity Pressure Exposure Coef., Kh 1.36
Velocity Pressure, qh 637.77 N/mm
h/L Ratio 2.09
Windward Roof Area 0.00 m
Roof Area Within 21 m of WW Edge 0.00 m

Location Min/Max Horiz Distance From Windward Edge


0.0 m 21.3 m 42.6 m 85.2 m
Windward Roof Coefficient Min -0.18 -0.18 -0.18 -0.18
Normal to Ridge, Cp Max -1.04 -1.04 -0.70 -0.70
Leeward Roof Coefficient Min -0.18 -0.18 -0.18 -0.18
Normal to Ridge, Cp Max #NAME? #NAME? #NAME? #NAME?
Roof Coefficient Min -0.18 -0.18 -0.18 -0.18
Parallel to Ridge, Cp Max #NAME? #NAME? #NAME? #NAME?

Structure Pressure Summary (Add Internal Pressure qzGCpi or qhGCpi as Necessary)


Roof
Kz qz Walls Normal to Ridge
Height, z
WW LW WW + LW Side WW
5.20 m #NAME? #NAME? #NAME? #NAME?
8.60 m #DIV/0! #DIV/0! #DIV/0! #DIV/0! Min:
12.00 m #DIV/0! #DIV/0! #DIV/0! #DIV/0! -95.97 N/mm
15.40 m #DIV/0! #DIV/0! #DIV/0! #DIV/0!
18.80 m #DIV/0! #DIV/0! #DIV/0! #DIV/0!
22.20 m #DIV/0! #DIV/0! #DIV/0! -266.6 psf #DIV/0! -373.22 N/mm
25.60 m #DIV/0! #DIV/0! #DIV/0! #DIV/0!
29.00 m #DIV/0! #DIV/0! #DIV/0! #DIV/0! Max:
32.40 m #DIV/0! #DIV/0! #DIV/0! #DIV/0! -373.22 N/mm
35.80 m #DIV/0! #DIV/0! #DIV/0! #DIV/0!
39.20 m #DIV/0! #DIV/0! #DIV/0! #DIV/0!
42.60 m #DIV/0! #DIV/0! #DIV/0! #DIV/0!
#DIV/0! #DIV/0! #DIV/0! #DIV/0!

4.6 0.85
6.1 0.9
7.6 0.94
9.1 0.98
12.2 1.04
15.2 1.09
18 1.13
21.3 1.17
24.4 1.21
27.3 1.24
30.5 1.26
36.6 1.31
42.7 1.36
48.8 1.39
54.9 1.43
61 1.46
76.2 1.53
91.4 1.59
106.7 1.64
121.9 1.69
137.2 1.73
152.4 1.77
1 -0.5
Table 1.5-1 2 -0.3
Figure 26.5-1A 4 -0.2
Table 26.6-1 1000 -0.2
Section 26.7
Section 26.8 Windward Roof: Normal to Ridge/Minim
Section 26.9
Section 26.10
Table 26.11-1 h/L 10
Table 26.9-1 0 -0.7
Table 26.9-1 0.25 -0.7
0.5 -0.9
1 #NAME?
1000 #NAME?

Windward Roof: Normal to Ridge/Maxim


Figure 27.4-1
Figure 27.4-1
Figure 27.4-1 h/L 10
0 -0.18
0.25 -0.18
0.5 -0.18
1 -0.18
Table 27.3-1 1000 -0.18
Equation 27.3-1
Leeward Roof: Normal to Ridge/Minimu
Roof Pressure Coefficients, C
Angle,
h/L 10
0 -0.3
Figure 27.4-1 0.25 -0.3
0.5 -0.5
1 -0.7
1000 -0.7

Normal to Ridge (q < 10) and Parallel to


Horiz Distance From Windward
h/L 0.0 m
Roof 0 -1.04
Normal to Ridge Parallel Internal 0.5 -0.9
LW to Ridge Positive Negative 1 -0.9
#NAME? 1000 -0.9
Min: Min: #DIV/0! Cp: #NAME?
-95.97 N/mm -95.97 N/mm #DIV/0!
#DIV/0! Normal to Ridge (q < 10) and Parallel to
#DIV/0! Horiz Distance From Windward
#DIV/0! -114.8 psf h/L 09 m
#DIV/0! 0 -0.18
Max: Max: #DIV/0! 0.5 -0.18
#NAME? #NAME? #DIV/0! 1 -0.18
#DIV/0! 1000 -0.18
#DIV/0! Cp: #NAME?
#DIV/0! Cp: #NAME?
#DIV/0! Cp: #NAME?
Area Factor
0 ft 1.00
100 ft 1.00
250 ft 0.90
1,000 ft 0.80
10,000 ft 0.80
d Roof: Normal to Ridge/Minimum Values (q 10)
Roof Pressure Coefficients, Cp
Angle, q (degrees)
15 20 25 30 35 45 60 80 1000
-0.5 -0.3 -0.2 -0.2 0 0.4 0.6 0.8 0.8
-0.5 -0.3 -0.2 -0.2 0 0.4 0.6 0.8 0.8
-0.7 -0.4 -0.3 -0.2 -0.2 0 0.6 0.8 0.8
-1 -0.7 -0.5 -0.3 -0.2 0 0.6 0.8 0.8
-1 -0.7 -0.5 -0.3 -0.2 0 0.6 0.8 0.8

d Roof: Normal to Ridge/Maximum Values (q 10)


Roof Pressure Coefficients, Cp
Angle, q (degrees)
15 20 25 30 35 45 60 80 1000
0 0.2 0.3 0.3 0.4 0.4 0.6 0.8 0.8
0 0.2 0.3 0.3 0.4 0.4 0.6 0.8 0.8
-0.18 0 0.2 0.2 0.3 0.4 0.6 0.8 0.8
-0.18 -0.18 0 0.2 0.2 0.3 0.6 0.8 0.8
-0.18 -0.18 0 0.2 0.2 0.3 0.6 0.8 0.8

Roof: Normal to Ridge/Minimum Values (q 10)


Roof Pressure Coefficients, Cp h/L: 2.09
Angle, q (degrees) q: 0.0
15 20 1000 Cp: NA
-0.5 -0.6 -0.6
-0.5 -0.6 -0.6
-0.5 -0.6 -0.6
-0.6 -0.6 -0.6
-0.6 -0.6 -0.6

o Ridge (q < 10) and Parallel to Ridge for all q/Minimum Values
oriz Distance From Windward Edge h/L: 2.09
21.3 m 42.6 m 85.2 m
-1.04 .-0.7 -0.7
-0.9 -0.5 -0.3
-0.9 -0.7 -0.7
-0.9 -0.7 -0.7
#NAME? #NAME? #NAME?

o Ridge (q < 10) and Parallel to Ridge for all q/Maximum Values
oriz Distance From Windward Edge h/L: 2.09
219 m 439 m 859 m
-0.18 -0.18 -0.18
-0.18 -0.18 -0.18
-0.18 -0.18 -0.18
-0.18 -0.18 -0.18
#NAME? #NAME? #NAME?
#NAME? #NAME? #NAME?
#NAME? #NAME? #NAME?
Design Parameters
Natural Frequency, n1 0.47 Hz
Basic Wind Speed, V 30.00 m/s
Exposure Category C
Building Width, B 28.6 m
Building Length, L 20.4 m
Mean Roof Height, h 42.6 m
Damping Ratio, b 2%

Calculations
Peak Factor for Background Response, gQ 3.40 gQ = 3.4
Peak Factor for Wind Response, gv 3.40 gv = 3.4
Peak Factor for Resonant Reaponse, gR 4.00 gR = [2 ln(3600n1)]+1/[2 ln(3600n1)]
Mean Hourly Wind Speed, Vz 27.50 m/s Vz = b(z/33) (88/60)V
a

Mean Hourly Wind Speed Power Law Exponent, a 0.154


Mean Hourly Wind Speed Factor, b 0.650
Turbulence Intensity Factor, c 0.200
Integral Length Scale Factor, 500.0 m
Integral Length Scale Power Law Exponent, e 0.200
Exposure Constant, zmin 15.0 m
Reduced Frequency, N1 8.10 N1 = n1Lz/Vz
Rn Value 0.037 Rn = 7.47N1/(1+10.3N1)5/3
h for Rh 3.34 h = 4.6n1h/Vz
h for RB 2.24 h = 4.6n1B/Vz
h for RL 5.4 h = 15.4n1L/Vz
Rh Value 0.255 R = 1/h-1/(2h2)(1-e-2h) for h > 0
RB Value 0.348 R = 1 for h = 0
RL Value 0.169
Resonant Response Factor, R 0.317 R = [(1/b)RnRhRB(0.53+0.47RL)]
Equivalent Height of Structure, z 25.6 m z = 0.6h zmin
Integral Length Scale of Turbulence, Lz 475.1 m Lz = (z/33)e
Background Response Factor, Q 0.916 Q = [1/(1+0.63((B+h)/Lz)0.63)]
Intensity of Turbulance, Iz 0.209 Iz = c(33/z)1/6
Gust Effect Factor, Gf 0.920 Gf = 0.925[(1+1.7Iz[gQ2Q2+gR2R2])/(1+1.7gvIz)]
Values from Table 26.9-1
Exposure a b c
B 0.250 0.450 0.300 320 ft
C 0.154 0.650 0.200 500 ft
D 0.111 0.800 0.150 650 ft

Section 26.9.5

Section 26.9.5
Section 26.9.5
Equation 26.9-11
Equation 26.9-16
Table 26.9-1
Table 26.9-1
Table 26.9-1
Table 26.9-1
Table 26.9-1
Table 26.9-1
Equation 26.9-14
Equation 26.9-13
Section 26.9.5
Section 26.9.5
Section 26.9.5
Equation 26.9-15(a-b)
Equation 26.9-15(a-b)
Equation 26.9-15(a-b)
Equation 26.9-12
Section 26.9.4
Equation 26.9-9
Equation 26.9-8
Equation 26.9-7
])/(1+1.7gvIz)]
2

Equation 26.9-10
e zmin
0.333 30 ft
0.200 15 ft
0.125 7 ft

You might also like