Scribd
Upload
529 views2 pages

Welding Procedure Specification Example

This document provides a welding procedure specification for a manual TIG welding process. It specifies details such as the welding position, joint type, filler metal size, current, voltage and gas used. The production sequence outlines the cleaning, tacking, root pass and completion of the weld using two filler metal sizes. A visual inspection is required after welding.

Uploaded by

Abraham Aby
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
529 views2 pages

Welding Procedure Specification Example

This document provides a welding procedure specification for a manual TIG welding process. It specifies details such as the welding position, joint type, filler metal size, current, voltage and gas used. The production sequence outlines the cleaning, tacking, root pass and completion of the weld using two filler metal sizes. A visual inspection is required after welding.

Uploaded by

Abraham Aby
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Welding Procedure Specification
  • Revision History and Additional Resources

11/9/2014 Welding Procedure Specifications

Welding Procedure Specification:- Example

Weld Procedure Number 30 P1 TIG 01 Issue A


Qualifying Welding Procedure (WPAR) WP T17/A

Method Of Preparation Machine and


Manufacturer: National Fabs Ltd
and Cleaning: Degrease
25 Lane End
Birkenshaw Parent Metal Specification: Grade 304L
Leeds Stainless Steel
Parent Metal Thickness 3 to 8mm Wall
Location: Workshop Pipe Outside Diameter 25 to 100mm
Welding Process: Manual TIG Welding Position: All Positions
Joint Type: Single Sided Butt Weld
Welding Progression: Upwards

Joint Design Welding Sequences

Size Of Wire
Current Voltage Type Of Travel Heat
Run Process Filler Feed
A V Current/Polarity Speed Input
Metal Speed
1
TIG 1.2mm 70 - 90 DC-
2 And N/A N/A N/A N/A
TIG 1.6mm 80 - 140 DC-
Subs

Welding Consumables:- Production Sequence


Type, Designation Trade Name: BS 2901 Part 2 : 308S92
Any Special Baking or Drying: No 1. Clean weld and 25mm
borders to bright metal
Gas Flux: Argon 99.99% Purity using approved solvent.
Gas Flow Rate - Shield: 8 - 12 LPM
2. Position items to be welded
- Backing: 5 LPM
ensuring good fit up and
apply purge
http://www.gowelding.com/wp/wps1.html 1/2
11/9/2014 Welding Procedure Specifications

Tungsten Electrode Type/ Size: 2% Thoriated 2.4mm Dia 3. Tack weld parts together
Details of Back Gouging/Backing: Gas Backing using TIG, tacks to at least
5mm min length
Preheat Temperature: 5C Min 4. Deposit root run using
Interpass temperature: 200C Max 1.2mm dia. wire.
Post Weld Heat Treatment Not Required 5. Inspect root run internally
Time, temperature, method: 6. Complete weld using
Heating and Cooling Rates*: 1.6mm dia wire using
stringer beads as required.
7. 100% Visual inspection of
completed weld

Revision History
Date Issue Changes Authorization
26/11/2000 A First Issue Jack Straw Jack Straw

Welding Procedure Specifications

Welding Qualifications Sub Menu

Page last updated 26 November 2000

http://www.gowelding.com/wp/wps1.html 2/2

You might also like