How to Chop Down a Tree

Expert
Reviewed

You need to chop down a tree. You can do it on your own, but you will need to acquire the necessary
gear and put some thought into the process. Plan carefully, for the sake of safety: decide where you
want your tree to fall, clear the area, and guide it down to the ground. Make sure that you have
permission to chop this tree!

Part One of Three:

Preparing to Chop

1 Choose a tree. Consider why you are chopping this tree: perhaps it has become an obstruction
in your yard; perhaps you need firewood for the winter; perhaps you want a Christmas tree. If you
already have a tree in mind, then you'll need to evaluate whether it is feasible to chop down. If you
don't own the land on which the tree grows, make sure that the landowner is okay with you removing
it.

If you are chopping a tree down for utility, not to clear space, there may be multiple choices. The
best tree will depend on what you intend to use it for: building planks, using as firewood, etc.
2 Know your rights. If the tree is on your own property, then you can chop it down at your own
discretion. You'll need to ask permission if the woods are on public land or on someone else's
private land. Do not illegally chop down a tree.

If you do get permission, make sure that you get some documentation so that you can prove that
you have permission if anyone questions you.
3 Plan ahead. You'll need to consider how tall the tree is and where it will fall. Discern whether the
tree is leaning in any particular direction, and make sure that it won't fall onto any person or
property. Decide what you'll do with the tree once you chop it. If you plan to move the tree, you'll need
to let it fall somewhere that you can easily recover it. If you leave the tree where it falls, it will take
some time for it to rot into the ground. In the meantime, it can serve as a home for beetles, roaches,
ants, snakes, and other pests.

View the tree from all angles to ascertain if it leans in any one direction. If so, determine whether
it will cause damage to fences, trees, driveways, sheds, or any surrounding property. You must
also determine that it will not fall back across or against your house. Proceed only if it passes
this test, and you still feel confident.
You also need to consider wind speed and direction when felling a tree because wind will affect
the direction in which the tree falls.
Ask an experienced woodsman for advice before cutting down a large tree.
4 Choose your chopping tool. You can use an ax, which is a slower, more archaic method best
suited to smaller trees. Many modern tree-cutters use a chainsaw, which is heavier-duty, but
more expensive and arguably more dangerous. Your choice will be largely dependent upon which
tools you have at your disposal.

Only use a chainsaw if you are very comfortable using heavy-duty power tools and have the
proper personal protective equipment including goggles, steel toe boots, long sleeves, and
pants.

5 Be safe. Be extremely careful not to stand in the path of a falling tree, and make sure that there
is no onefriends, neighbors, children, pets&mash;in the way when you make the cut. Consider
wearing gloves, a helmet, goggles, and other safety gear. Remember: if the tree is large, it could
easily kill you or a loved one when it falls.

Be aware of property damage. Make sure that the tree won't fall onto any buildings, vehicles, etc.
If you are chopping a tree in the woods, make sure that you know where all members of your
party are at all times. Make sure that you can safely remove the tree from the woods.
Part Two of Three:
Chopping with an Ax

1 Find your chopping tool. Use a chopping ax (not a splitting ax) or a large machete/knife. The
size of the necessary ax depends on the size of the tree.
2 Tie a rope to a high, thick branch on the tree. Tie it as tightly as you can to another tree, or
big rock in the direction you want it to fall. (You may throw a cord with a weight on it over a limb
and pull a rope up and figure out how to tie it.) Tie the rope to something that is farther away than the
height of the tree, unless you don't care where the tree lands. Tie this rope tightly and make sure
there are a couple of backup knots on it.

Avoid damaging any fence, building or vehicle.

3 Start slowly with your chops. Try to get a good "V" shape going on the side of the tree--
remember, axes aren't saws; you cannot chop in a straight line.
 Do not try to chop the wood straight. Wedge out little pieces on the side you want it to fall.
You do not need to make it all the way through the tree on one side, just think about where it is
best to chop it.

4 Be aware of the tree's stability. Keep your eyes and ears open, and be prepared to run out of
the way Watch upward, and listen for cracking and groaning sounds. Cracking or groaning will
tell you that the tree may be about to give way. As you chop, continue to glance upward into the tree
for any swaying or leaning.
 5 Get away quickly when it begins moving. A tree can fall quickly and quietly, and it can easily
catch you by surprise. If you are not paying attention, the tree could fell you!

Expect the tree to swing around as it falls. This is due to limbs or the slant of the tree, and due to
your "guide" rope. Limbs of your tree may extend outward far enough to strike you. Stay out of
the way.
Watch for surrounding trees. The branches of other trees may become entangled or break, and
you may find that other limbs and trees begin to fall around you.

Part Three of Three:

Felling with a Chainsaw
1 Rent, buy, or borrow a chainsaw. You can rent small chainsaw with with an 18" bar at most
hardware stores. These saws are normally 2 cycle engines which require a mixture of two cycle
oil and gas. If you rent one, insist on them providing you with a full can if gasoline mixture. You will
need what is called "bar oil", which goes into its own tank and lubricates the chain and the bar it is
on. Finally, have then shop you how it starts, and ask them to check to make sure the chain is sharp.

2 Pick an area where you want the tree to fall. If the tree is standing pretty straight, you will
need to make a wedge cut.
3 Start your saw. Go to the front of the tree and start your saw. Let it run for a minute to warm up.
If your chainsaw doesn't have an automatic oilier, make sure to push the oil button occasionally.
Most modern saws do include an automatic oilier.

You never want the chain or bar to get dry under the heat. Bar oil is formulated to cling to the bar,
and it will actually string from the bar it you touch your finger to it.
4 Make the first cut. Rev the saw up about halfway. Hold it completely horizontal, then make a cut
from the side in about 1/3 of the diameter of the tree. Then, go up about 3-4" above that cut: pick
an imaginary line that will start above the 1st cut, and maintain 45 degrees all the way down, (an
angle cut) to where the horizontal cut stopped. Go no further. This is your wedge piece, which you will
need to remove.

You may need to knock the wedge piece loose with a sledgehammer. Knock it on the side, then
the top, then the side again.

5 Guide the tree as it falls. You can assist the tree in falling along your desired path by roping it
and tying it securely with at least a 1/2" rope 2/3 of the way up the trunk. Then, hook that rope to
a come-along hand-winch that's tied to a larger tree. Make sure that the larger tree is far enough
away that your tree won't fall into it. As you start to cut the tree, have a friend begin to crank the come-
along to maintain pressure toward your targeted zone.

Alternatively, you can use two wedges. Once your saw blade is well into the cut (far enough along
so the wedges will not hit the bar of the saw) begin to drive them in equally behind the saw blade.
 Watch the tree as it is being cut. If it leans one way more than the other and that takes it off path,
pound the wedge on that side in a bit more. Try to keep the wedges even so the tree falls evenly.
Do not stand directly behind the tree. It can break loose from the trunk and "kick back", causing
extreme damage or even death to the cutter(s).

6 Fell the tree. Move to the back of the tree, and make sure the area where you stand is
completely clear. Pick a horizontal, straight line that will intersect the top angle of the wedge cut
you made about 1/3 of the way from where it ends in the tree. As you cut, use a high engine speed,
but don't push the saw too hard. Eventually as you near the intersection of the wedge cut the tree
should begin to bend in the direction of the fall. Do not cut all the way through.
7 Move away and yell "Timber!" When the tree begins to fall, move out of the way and yell to
anyone around to get out of the way. If the fall begins to slow, give it a little more cut until it
resumes falling. It will normally break loose of the stump and lie on either side of the stump.

De-Brush and remove the tree. Lop the limbs off in the direction of the growth, and take a piece of
 8 chalk to mark where you want each cut made. Saw it up and remove it from the area!

Tips

Always carry a whistle in the woods.

Helpful?

Have a sharp axe, because a dull axe is about as good as a big stick with a steel brick on the end.
Helpful?

Have a cell phone or other way to contact a hospital or police department.

Helpful?

Have a small medical kit with you in case of accidental injuries.

Helpful?

Before you go out there and start hacking at the tree, get helpful tips from experienced woodsmen.
Helpful?

Plan an escape route before you start cutting down the tree.
Helpful?

Warnings

Ask the landowner before you go chopping down anything.

6 Helpful? 1

Know where people, animals and improvements are around you.

5 Helpful? 3

Let people in the area know; so they do not call the police on you.
5 Helpful? 3

Make sure someone knows where you are and what you are doing when you are doing it.
3 Helpful? 4

As with swinging any sharp things around, be careful. Keep limbs out of the way of the axe or you
might have it the axe "knocked-out" of your hands.
 3 Helpful? 4

Some kind of training to safely work with and handle chainsaws is strongly advisable.
0 Helpful? 1

Never use a chainsaw to cut something above your shoulders.

Helpful?

Things You'll Need

An ax/hatchet/chainsaw
A helmet
A rope and a winch (for safety)
Personal protective equipment

About this wikiHow

Expert Review By:

Lauren Kurtz
LK
Horticulturist

Co-authors: 15
16 votes - 69% Updated: 11 days ago
Views: 27,447

Categories: Growing Trees and Shrubs