I- 32
Class I, Div. 2
Class II, Div. 1 and 2 Conduit Hubs for Threaded RMC and IMC
Class III
NEC 501- 4(b), 502- 4(a)(b),
503- 3(a)
Applications
Uni-seal conduit hubs are used
for installing threaded rigid and IMC
conduit systems into sheet metal
enclosures, eliminating the need for
welded hubs.
Features
Patented (space saving) hex-hub
wedge adaptor fits nearly flush against
inside walls of enclosures.
Single wrench installation, simple
two-piece construction.
Protective flame-resistant insulated
throat eliminates any need for end
bushings.
Locking edge of body bites into
enclosure wall, makes hub self-
locking, eliminates the need for lock-
nuts, provides continuous 360 pres-
sure on both sides of enclosure, forms
positive grounding and vibration-resis-
tant connection.
Built-in recessed neoprene gasket.
I
Full, machined tapered threads
(NPT). Wall
Standard Materials Catalog Size Hole Dia.(In.) Thickness (In.) Dimension (In.)
Number* (In.) Min. Max. Min. Max. A B
HUB-50 thru HUB-100; steel.
HUB-125 thru HUB-600 and HUB- Straight
HUB-50 1/2 7/8 15/16 1/16 5/64 1-5/64 1-7/64
9050 thru HUB-90100: malleable iron.
31/32 3/32 1/4
Standard Finishes HUB-75 3/4 1-3/32 1-5/32 1/16 5/64 1-7/64 1-3/8
Steelzinc electroplate.
HUB-100 1 1-11/32
1-7/32
1-13/32
3/32
1/16
1/4
5/64 1-1/4 1-23/32
Malleable iron: triple coat (1) zinc 1-15/32 3/32 1/4
electroplate, (2) dichromate, and (3) HUB-125 1-1/4 1-11/16 1-25/32 1/16 5/64 1-51/64 2-5/16
epoxy powder coat. 1-27/32 3/32 5/16
HUB-150 1-1/2 1-15/16 2-1/32 1/16 5/64 1-53/64 2-5/8
Size Range 2-3/32 3/32 5/16
Straight: 1/2 thru 6 (hub) size. HUB-200 2 2-25/64 2-17/32 1/16 5/64 1-7/8 3-1/8
90: 1/2 thru 1 (hub) size.
HUB-250 2-1/2 2-57/64
2-19/32
3-1/64
3/32
3/32
5/16
5/16 2-25/64 3-5/8
Compliances HUB-300 3 3-33/64 3-41/64 3/32 5/16 2-31/64 4-5/16
UL Standard 514B. HUB-350 3-1/2 4-1/64 4-1/8 3/32 5/16 2-9/16 4-13/16
CSA Standard C22.2 No. 18. HUB-400
HUB-500
4
5
4-33/64
5-19/32
4-5/8
5-13/16
3/32
1/8
5/16
3/4
2-5/8
2-1/16
5-7/16
6-5/8
Suitable for hazardous locations HUB-600 6 6-21/32 6-7/8 1/8 3/4 2-1/16 7-11/16
Class I, Div. 2
90Malleable Iron
Class II, Div. 1 and 2 HUB-90 50 1/2 7/8 15/16 1/16 5/64 1-9/32 7/8
Class III, Div. 1 and 2 31/32 3/32 1/4
NEC 501-4(b), 502-4(a)(b), 503-3(a) HUB-90 75 3/4 1-3/32 1-5/32 1/16 5/64 1-7/16 15/16
1-7/32 3/32 1/4
HUB-90 100 1 1-11/32 1-13/32 1/16 5/64 1-5/8 1-1/8
1-15/32 3/32 1/4
U.S. Patent 3,055,683 * Available with PVC CoatingConsult factory.
Canada Patent 708,255
Effective September, 2005 800-621-1506
Copyright 2005 www.appletonelec.com
PAGE 32
