Scribd
Upload
154 views1 page

Material-Datasheet Saarstahl - C15

This document provides information on material C15, including its chemical composition, applications, and mechanical properties. C15 is a bright steel according to DIN EN 10277, with a carbon content between 0.12-0.18% and additional elements such as silicon and manganese. It is well-suited for general technical applications. Depending on whether it is rolled and peeled or cold drawn, C15 can achieve various hardness levels from 98-178 HB and tensile strengths ranging from 330-800 MPa.

Uploaded by

Rohit Gadekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
154 views1 page

Material-Datasheet Saarstahl - C15

This document provides information on material C15, including its chemical composition, applications, and mechanical properties. C15 is a bright steel according to DIN EN 10277, with a carbon content between 0.12-0.18% and additional elements such as silicon and manganese. It is well-suited for general technical applications. Depending on whether it is rolled and peeled or cold drawn, C15 can achieve various hardness levels from 98-178 HB and tensile strengths ranging from 330-800 MPa.

Uploaded by

Rohit Gadekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Material-Datasheet

Saarstahl - C15
Material-No.: Former brand name: International steel grades:

1.0401 BS: 080A15, 080M15


AFNOR: AF37C12, XC18
SAE: 1015, 1016, 1017

Material group: Bright steels according to DIN EN 10277

Chemical C Si Mn P S
Composition: 0,12 0,30
(Typical analysis in %) <0,40 0,045 0,045
0,18 0,60

Application: Bright steels for general technical applications

Hot forming and


heat treatment:

Mechanical
Properties:

Rolled and peeled (+SH)

Thickness d [mm] >= 5 - 10 > 10 - 16 > 16 - 40 > 40 - 63 >63 - 100

Hardness [HB] - - 98 - 178 98 - 178 98 - 178

Tensile strength Rm [N/mm] - - 330 - 600 330 - 600 330 - 600

Cold drawn (+C)

Thickness d [mm] >= 5 - 10 > 10 - 16 > 16 - 40 > 40 - 63 >63 - 100

Proof stress R0,2 [N/mm] min. 380 min. 340 min. 280 min. 240 min. 215

Tensile strength Rm [N/mm] 500 - 800 480 - 780 430 - 730 380 - 670 340 - 600

Fracture elongation A5 [%] min. 7 min. 8 min. 9 min. 11 min. 12

You might also like