COURSE OVERVIEW
TOP
The CCNA Routing and Switching Boot Camp is a composite course derived from ICND1 and ICND2
content merged into a single accelerated course. Overlapping content is eliminated and some content is
rearranged for the purpose of course flow.
In this course, you will learn how to install, operate, configure, and troubleshoot basic IPv4 and IPv6
networks, including configuring a LAN switch, configuring an IP router, identifying basic security threats,
understanding redundant topologies, troubleshooting common network issues, connecting to a WAN,
configuring EIGRP and OSPF in both IPv4 and IPv6, understanding wide-area network technologies, and
getting familiar with device management and Cisco licensing.
Key additions to this latest revision include an understanding of Quality of Service (QoS) elements and
their applicability, how virtualized and cloud services will interact and impact enterprise networks, and an
overview of network programmability with the related controller types and tools that are available to
support software defined network architectures.
You will learn about the interactions and network functions of firewalls, wireless controllers and access
points, along with additional focus on IPv6 and basic network security
A full suite of labs have been developed using the virtual IOS environment with flexible topologies that
reinforce concepts with hands-on, guided discovery and challenge labs that align to each lesson module.
This course will enable you to:
Prepare for the CCNA Routing and Switching certification
Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and
spanning tree
Interactions and network functions of firewalls, wireless controllers and access points
Develop core routing and switching networking skills to configure, monitor, and
troubleshoot Cisco networks for increased effectiveness and optimal performance within
SMB and Enterprise settings
how device management can be implemented using the traditional and intelligent ways
QoS, virtualization and cloud services, and network programmability related to WAN,
access and core segments
Support Cisco network deployments and maintain these services in an on-going
operational network.
Course exclusives:
This is an intensive, extended-hours boot camp. Participants should expect to be in
class for 12 hours on each of the five days.
Classroom Live and Virtual Classroom Live students will receive a free CCNA (200-125
CCNAX) voucher.
Lab time:
-120 hours total over 180 days for CCNAX.
-Labs are one to one and on Virtual Machines.
-Be sure to logout of labs during class. Any remaining lab time can be used after class for
additional practice and review.
WHAT YOU'LL LEARN
TOP
Network fundamentals and build simple LANs
Establish Internet connectivity
Manage and secure network devices
Operate a medium-sized LAN with multiple switches, supporting VLANs, trunking, and
spanning tree
Troubleshoot IP connectivity
Describe how to configure and troubleshoot EIGRP in an IPv4 environment, and
configure EIGRP for IPv6
Configure and troubleshoot OSPF in an IPv4 environment and configure OSPF for IPv6
Characteristics, functions, and components of a WAN
How device management can be implemented using the traditional and intelligent ways.
QoS, virtualization and cloud services, and network programmability related to WAN,
access and core segments.
OUTLINE
TOP
Virtual Classroom Live
Viewing outline for:
Virtual Classroom Live
Virtual Classroom Live Outline
1. Building a Simple Network
Exploring the Functions of Networking
Understanding the Host-to-Host Communications Model
Introducing LANs
Operating Cisco IOS Software
Starting a Switch
Understanding Ethernet and Switch Operation
Troubleshooting Common Switch Media Issues
2. Establishing Internet Connectivity
Understanding the TCP/IP Internet Layer
Understanding IP Addressing and Subnets
Understanding the TCP/IP Transport Layer
Exploring the Functions of Routing
Configuring a Cisco Router
Exploring the Packet Delivery Process
Enabling Static Routing
Learning Basics of ACL
Enabling Internet Connectivity
3. Summary Challenge
Establish Internet Connectivity
Troubleshoot Internet Connectivity
4. Implementing Scalable Medium-Sized Networks
Implementing and Troubleshooting VLANs and Trunks
Building Redundant Switched Topologies
Improving Redundant Switched Topologies with EtherChannel
Routing Between VLANs
Using a Cisco IOS Network Device as a DHCP Server
Understanding Layer 3 Redundancy
Implementing RIPv2
5. Introducing IPv6
Introducing Basic IPv6
Understanding IPv6 Operation
Configuring IPv6 Static Routes
6. Troubleshooting Basic Connectivity
Troubleshooting IPv4 Network Connectivity
Troubleshooting IPv6 Network Connectivity
7. Implementing Network Device Security
Securing Administrative Access
Implementing Device Hardening
Implementing Advance Security
8. Implementing an EIGRP-Based Solution
Implementing EIGRP
Implementing EIGRP for IPv6
9. Summary Challenge
Troubleshooting a Medium-Sized Network
Troubleshooting Scalable Medium-Sized Network
10. Implementing a Scalable OSPF-Based Solution
Understanding OSPF
Multiarea OSPF IPv4 Implementation
Implementing OSPFv3 for IPv6
Troubleshooting Multiarea OSPF
11. Implementing Wide-Area Networks
Understanding WAN Technologies
Understanding Point-to-Point Protocols
Configuring GRE Tunnels
Configuring Single-Homed EBGP
12. Network Device Management
Implementing Basic Network Device Management
Evolution of Intelligent Networks
Introducing QoS
Managing Cisco Devices
Licensing
13. Summary Challenge
Troubleshooting Scalable Multiarea Network
Implementing and Troubleshooting Scalable Multiarea Network
View More
1. Building a Simple Network
Exploring the Functions of Networking
Understanding the Host-to-Host Communications Model
Introducing LANs
Operating Cisco IOS Software
Starting a Switch
Understanding Ethernet and Switch Operation
Troubleshooting Common Switch Media Issues
2. Establishing Internet Connectivity
Understanding the TCP/IP Internet Layer
Understanding IP Addressing and Subnets
Understanding the TCP/IP Transport Layer
Exploring the Functions of Routing
Configuring a Cisco Router
Exploring the Packet Delivery Process
Enabling Static Routing
Learning Basics of ACL
Enabling Internet Connectivity
3. Summary Challenge
Establish Internet Connectivity
Troubleshoot Internet Connectivity
4. Implementing Scalable Medium-Sized Networks
Implementing and Troubleshooting VLANs and Trunks
Building Redundant Switched Topologies
Improving Redundant Switched Topologies with EtherChannel
Routing Between VLANs
Using a Cisco IOS Network Device as a DHCP Server
Understanding Layer 3 Redundancy
Implementing RIPv2
5. Introducing IPv6
Introducing Basic IPv6
Understanding IPv6 Operation
Configuring IPv6 Static Routes
6. Troubleshooting Basic Connectivity
Troubleshooting IPv4 Network Connectivity
Troubleshooting IPv6 Network Connectivity
7. Implementing Network Device Security
Securing Administrative Access
Implementing Device Hardening
Implementing Advance Security
8. Implementing an EIGRP-Based Solution
Implementing EIGRP
Implementing EIGRP for IPv6
9. Summary Challenge
Troubleshooting a Medium-Sized Network
Troubleshooting Scalable Medium-Sized Network
10. Implementing a Scalable OSPF-Based Solution
Understanding OSPF
Multiarea OSPF IPv4 Implementation
Implementing OSPFv3 for IPv6
Troubleshooting Multiarea OSPF
11. Implementing Wide-Area Networks
Understanding WAN Technologies
Understanding Point-to-Point Protocols
Configuring GRE Tunnels
Configuring Single-Homed EBGP
12. Network Device Management
Implementing Basic Network Device Management
Evolution of Intelligent Networks
Introducing QoS
Managing Cisco Devices
Licensing
13. Summary Challenge
Troubleshooting Scalable Multiarea Network
Implementing and Troubleshooting Scalable Multiarea Network
View More
1. Building a Simple Network
Exploring the Functions of Networking
Understanding the Host-to-Host Communications Model
Introducing LANs
Operating Cisco IOS Software
Starting a Switch
Understanding Ethernet and Switch Operation
Troubleshooting Common Switch Media Issues
2. Establishing Internet Connectivity
Understanding the TCP/IP Internet Layer
Understanding IP Addressing and Subnets
Understanding the TCP/IP Transport Layer
Exploring the Functions of Routing
Configuring a Cisco Router
Exploring the Packet Delivery Process
Enabling Static Routing
Learning Basics of ACL
Enabling Internet Connectivity
3. Summary Challenge
Establish Internet Connectivity
Troubleshoot Internet Connectivity
4. Implementing Scalable Medium-Sized Networks
Implementing and Troubleshooting VLANs and Trunks
Building Redundant Switched Topologies
Improving Redundant Switched Topologies with EtherChannel
Routing Between VLANs
Using a Cisco IOS Network Device as a DHCP Server
Understanding Layer 3 Redundancy
Implementing RIPv2
5. Introducing IPv6
Introducing Basic IPv6
Understanding IPv6 Operation
Configuring IPv6 Static Routes
6. Troubleshooting Basic Connectivity
Troubleshooting IPv4 Network Connectivity
Troubleshooting IPv6 Network Connectivity
7. Implementing Network Device Security
Securing Administrative Access
Implementing Device Hardening
Implementing Advance Security
8. Implementing an EIGRP-Based Solution
Implementing EIGRP
Implementing EIGRP for IPv6
9. Summary Challenge
Troubleshooting a Medium-Sized Network
Troubleshooting Scalable Medium-Sized Network
10. Implementing a Scalable OSPF-Based Solution
Understanding OSPF
Multiarea OSPF IPv4 Implementation
Implementing OSPFv3 for IPv6
Troubleshooting Multiarea OSPF
11. Implementing Wide-Area Networks
Understanding WAN Technologies
Understanding Point-to-Point Protocols
Configuring GRE Tunnels
Configuring Single-Homed EBGP
12. Network Device Management
Implementing Basic Network Device Management
Evolution of Intelligent Networks
Introducing QoS
Managing Cisco Devices
Licensing
13. Summary Challenge
Troubleshooting Scalable Multiarea Network
Implementing and Troubleshooting Scalable Multiarea Network
View More
LABS
TOP
Virtual Classroom Live
Viewing labs for:
Virtual Classroom Live
Virtual Classroom Live Labs
Discovery Lab 1: Get Started with Cisco CLI
Discovery Lab 2: Perform Basic Switch Configuration
Discovery Lab 3: Observe How a Switch Operates
Discovery Lab 4: Troubleshoot Switch Media and Port Issues
Discovery Lab 5: Inspect TCP/IP Applications
Discovery Lab 6: Start with Cisco Router Configuration
Discovery Lab 7: Configure Cisco Discovery Protocol
Discovery Lab 8: Configure Default Gateway
Discovery Lab 9: Exploration of Packet Forwarding
Discovery Lab 10: Configure and Verify Static Routes
Discovery Lab 11: Configure and Verify ACLs
Discovery Lab 12: Configure a Provider-Assigned IP Address
Discovery Lab 13: Configure Static NAT
Discovery Lab 14: Configure Dynamic NAT and PAT
Discovery Lab 15: Troubleshoot NAT
Discovery Lab 16: Configure VLAN and Trunk
Discovery Lab 17: Troubleshoot VLANs and Trunks
Discovery Lab 18: Configure Root Bridge and Analyze STP Topology
Discovery Lab 19: Troubleshoot STP Issues
Discovery Lab 20: Configure and Verify EtherChannel
Discovery Lab 21: Configure a Router on a Stick
Discovery Lab 22: Configure a Cisco Router as a DHCP Server
Discovery Lab 23: Troubleshoot DHCP Issues
Discovery Lab 24: Configure and Verify HSRP
Discovery Lab 25: Troubleshoot HSRP
Discovery Lab 26: Configure and Verify RIPv2
Discovery Lab 27: Troubleshoot RIPv2
Discovery Lab 28: Configure Basic IPv6 Connectivity
Discovery Lab 29: Configure IPv6 Static Routes
Discovery Lab 30: Use Troubleshooting Tools
Discovery Lab 31: Configure and Verify IPv4 Extended Access Lists
Discovery Lab 32: Troubleshoot IPv4 Network Connectivity
Discovery Lab 33: Configure and Verify IPv6 Extended Access Lists
Discovery Lab 34: Troubleshoot IPv6 Network Connectivity
Discovery Lab 35: Enhance Security of Initial Configuration
Discovery Lab 36: Limit Remote Access Connectivity
Discovery Lab 37: Configure and Verify Port Security
Discovery Lab 38: Configure and Verify NTP
Discovery Lab 39: Configure External Authentication Using RADIUS and TACACS+
Discovery Lab 40: Configure and Verify EIGRP
Discovery Lab 41: Configure and Verify EIGRP for IPv6
Discovery Lab 42: Troubleshoot EIGRP
Discovery Lab 43: Configure and Verify Single-Area OSPF
Discovery Lab 44: Configure and Verify Multiarea OSPF
Discovery Lab 45: Configure and Verify OSPFv3
Discovery Lab 46: Troubleshoot Multiarea OSPF
Discovery Lab 47: Configure Serial Interface and PPP
Discovery Lab 48: Configure and Verify MLP
Discovery Lab 49: Configure and Verify PPPoE Client
Discovery Lab 50: Configure and Verify GRE Tunnel
Discovery Lab 51: Configure and Verify Single Homed EBGP
Challenge Lab 1: Summary Challenge Lab: 1
Challenge Lab 2: Summary Challenge Lab: 2
Challenge Lab 3: Implementing RIPv2
Challenge Lab 4: Implement IPv6 Static Routing
Challenge Lab 5: Troubleshooting IPv4 Connectivit
Challenge Lab 6: Troubleshooting IPv6 Connectivity
Challenge Lab 7: Securing Device Administrative Access
Challenge Lab 8: Implementing Device Hardening
Challenge Lab 9: Troubleshooting EIGRP
Challenge Lab 10: Summary Challenge Lab: 3
Challenge Lab 11: Summary Challenge Lab: 4
Challenge Lab 12: Troubleshooting OSPF
View More
Discovery Lab 1: Get Started with Cisco CLI
Discovery Lab 2: Perform Basic Switch Configuration
Discovery Lab 3: Observe How a Switch Operates
Discovery Lab 4: Troubleshoot Switch Media and Port Issues
Discovery Lab 5: Inspect TCP/IP Applications
Discovery Lab 6: Start with Cisco Router Configuration
Discovery Lab 7: Configure Cisco Discovery Protocol
Discovery Lab 8: Configure Default Gateway
Discovery Lab 9: Exploration of Packet Forwarding
Discovery Lab 10: Configure and Verify Static Routes
Discovery Lab 11: Configure and Verify ACLs
Discovery Lab 12: Configure a Provider-Assigned IP Address
Discovery Lab 13: Configure Static NAT
Discovery Lab 14: Configure Dynamic NAT and PAT
Discovery Lab 15: Troubleshoot NAT
Discovery Lab 16: Configure VLAN and Trunk
Discovery Lab 17: Troubleshoot VLANs and Trunks
Discovery Lab 18: Configure Root Bridge and Analyze STP Topology
Discovery Lab 19: Troubleshoot STP Issues
Discovery Lab 20: Configure and Verify EtherChannel
Discovery Lab 21: Configure a Router on a Stick
Discovery Lab 22: Configure a Cisco Router as a DHCP Server
Discovery Lab 23: Troubleshoot DHCP Issues
Discovery Lab 24: Configure and Verify HSRP
Discovery Lab 25: Troubleshoot HSRP
Discovery Lab 26: Configure and Verify RIPv2
Discovery Lab 27: Troubleshoot RIPv2
Discovery Lab 28: Configure Basic IPv6 Connectivity
Discovery Lab 29: Configure IPv6 Static Routes
Discovery Lab 30: Use Troubleshooting Tools
Discovery Lab 31: Configure and Verify IPv4 Extended Access Lists
Discovery Lab 32: Troubleshoot IPv4 Network Connectivity
Discovery Lab 33: Configure and Verify IPv6 Extended Access Lists
Discovery Lab 34: Troubleshoot IPv6 Network Connectivity
Discovery Lab 35: Enhance Security of Initial Configuration
Discovery Lab 36: Limit Remote Access Connectivity
Discovery Lab 37: Configure and Verify Port Security
Discovery Lab 38: Configure and Verify NTP
Discovery Lab 39: Configure External Authentication Using RADIUS and TACACS+
Discovery Lab 40: Configure and Verify EIGRP
Discovery Lab 41: Configure and Verify EIGRP for IPv6
Discovery Lab 42: Troubleshoot EIGRP
Discovery Lab 43: Configure and Verify Single-Area OSPF
Discovery Lab 44: Configure and Verify Multiarea OSPF
Discovery Lab 45: Configure and Verify OSPFv3
Discovery Lab 46: Troubleshoot Multiarea OSPF
Discovery Lab 47: Configure Serial Interface and PPP
Discovery Lab 48: Configure and Verify MLP
Discovery Lab 49: Configure and Verify PPPoE Client
Discovery Lab 50: Configure and Verify GRE Tunnel
Discovery Lab 51: Configure and Verify Single Homed EBGP
Challenge Lab 1: Summary Challenge Lab: 1
Challenge Lab 2: Summary Challenge Lab: 2
Challenge Lab 3: Implementing RIPv2
Challenge Lab 4: Implement IPv6 Static Routing
Challenge Lab 5: Troubleshooting IPv4 Connectivit
Challenge Lab 6: Troubleshooting IPv6 Connectivity
Challenge Lab 7: Securing Device Administrative Access
Challenge Lab 8: Implementing Device Hardening
Challenge Lab 9: Troubleshooting EIGRP
Challenge Lab 10: Summary Challenge Lab: 3
Challenge Lab 11: Summary Challenge Lab: 4
Challenge Lab 12: Troubleshooting OSPF
View More
Discovery Lab 1: Get Started with Cisco CLI
Discovery Lab 2: Perform Basic Switch Configuration
Discovery Lab 3: Observe How a Switch Operates
Discovery Lab 4: Troubleshoot Switch Media and Port Issues
Discovery Lab 5: Inspect TCP/IP Applications
Discovery Lab 6: Start with Cisco Router Configuration
Discovery Lab 7: Configure Cisco Discovery Protocol
Discovery Lab 8: Configure Default Gateway
Discovery Lab 9: Exploration of Packet Forwarding
Discovery Lab 10: Configure and Verify Static Routes
Discovery Lab 11: Configure and Verify ACLs
Discovery Lab 12: Configure a Provider-Assigned IP Address
Discovery Lab 13: Configure Static NAT
Discovery Lab 14: Configure Dynamic NAT and PAT
Discovery Lab 15: Troubleshoot NAT
Discovery Lab 16: Configure VLAN and Trunk
Discovery Lab 17: Troubleshoot VLANs and Trunks
Discovery Lab 18: Configure Root Bridge and Analyze STP Topology
Discovery Lab 19: Troubleshoot STP Issues
Discovery Lab 20: Configure and Verify EtherChannel
Discovery Lab 21: Configure a Router on a Stick
Discovery Lab 22: Configure a Cisco Router as a DHCP Server
Discovery Lab 23: Troubleshoot DHCP Issues
Discovery Lab 24: Configure and Verify HSRP
Discovery Lab 25: Troubleshoot HSRP
Discovery Lab 26: Configure and Verify RIPv2
Discovery Lab 27: Troubleshoot RIPv2
Discovery Lab 28: Configure Basic IPv6 Connectivity
Discovery Lab 29: Configure IPv6 Static Routes
Discovery Lab 30: Use Troubleshooting Tools
Discovery Lab 31: Configure and Verify IPv4 Extended Access Lists
Discovery Lab 32: Troubleshoot IPv4 Network Connectivity
Discovery Lab 33: Configure and Verify IPv6 Extended Access Lists
Discovery Lab 34: Troubleshoot IPv6 Network Connectivity
Discovery Lab 35: Enhance Security of Initial Configuration
Discovery Lab 36: Limit Remote Access Connectivity
Discovery Lab 37: Configure and Verify Port Security
Discovery Lab 38: Configure and Verify NTP
Discovery Lab 39: Configure External Authentication Using RADIUS and TACACS+
Discovery Lab 40: Configure and Verify EIGRP
Discovery Lab 41: Configure and Verify EIGRP for IPv6
Discovery Lab 42: Troubleshoot EIGRP
Discovery Lab 43: Configure and Verify Single-Area OSPF
Discovery Lab 44: Configure and Verify Multiarea OSPF
Discovery Lab 45: Configure and Verify OSPFv3
Discovery Lab 46: Troubleshoot Multiarea OSPF
Discovery Lab 47: Configure Serial Interface and PPP
Discovery Lab 48: Configure and Verify MLP
Discovery Lab 49: Configure and Verify PPPoE Client
Discovery Lab 50: Configure and Verify GRE Tunnel
Discovery Lab 51: Configure and Verify Single Homed EBGP
Challenge Lab 1: Summary Challenge Lab: 1
Challenge Lab 2: Summary Challenge Lab: 2
Challenge Lab 3: Implementing RIPv2
Challenge Lab 4: Implement IPv6 Static Routing
Challenge Lab 5: Troubleshooting IPv4 Connectivit
Challenge Lab 6: Troubleshooting IPv6 Connectivity
Challenge Lab 7: Securing Device Administrative Access
Challenge Lab 8: Implementing Device Hardening
Challenge Lab 9: Troubleshooting EIGRP
Challenge Lab 10: Summary Challenge Lab: 3
Challenge Lab 11: Summary Challenge Lab: 4
Challenge Lab 12: Troubleshooting OSPF
View Less
