Scribd
Upload
231 views1 page

Pergo Universal TDS

This document provides technical specifications for 8mm laminate flooring made in Malaysia using German technology. The flooring has a wear layer of melamine resin overlay paper, decorative film of impregnated paper, and melamine resin backing. Panels are 196mm by 1288mm and packed 60 per pallet, with 22 pallets per shipping container. The flooring meets various European standards for properties such as thickness, abrasion resistance, indentation resistance, humidity resistance, and formaldehyde emissions.

Uploaded by

ravikumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
231 views1 page

Pergo Universal TDS

This document provides technical specifications for 8mm laminate flooring made in Malaysia using German technology. The flooring has a wear layer of melamine resin overlay paper, decorative film of impregnated paper, and melamine resin backing. Panels are 196mm by 1288mm and packed 60 per pallet, with 22 pallets per shipping container. The flooring meets various European standards for properties such as thickness, abrasion resistance, indentation resistance, humidity resistance, and formaldehyde emissions.

Uploaded by

ravikumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UNIVERSAL

Technical Data Sheet : 8mm Laminate Flooring

Product Made in Malaysia : German Technology, Manufactured under License from the Pergo Group
Production Method : DPL Direct Pressure Laminate according to EN 13329:2006
Thickness of panels : 8mm
Decor dimensions : 196mm x 1288mm
Pallets per container : 22 pallets for 20 = 2,666.40m
Packing : 1 carton = 8 panels 2.02m
1 pallet = 60 cartons 121.20m
8 panels 15 kg / carton
60 cartons 910 kg / pallet

Technical Facts & Specifications


Design : Wear layer Melamine resin based overlay paper
Decorative film Impregnated decorative paper
Barrier Melamine resin based backing
Surface texture Normal Texture / Deep Emboss
Special features 4-sides moisture protection

Other Properties
No Characteristic Standard Pergo Indias Requirement
t average 0.50mm, relative to nominal value
1 Thickness of the element EN 13329 : 2006
t max t min 0.50mm
h average 0.10mm
2 Height different between elements EN 13329 : 2006
h max 0.15mm
AC3; IP-value: 2000 revolutions
3 Abrasion class EN 13329 : 2006
AC4; IP-value: 4000 revolutions
No visible change, i.e. 0.01mm indentation using a straight steel
4 Static Indentation EN 13329 : 2006
cylinder, = 11.30mm
Dimensional variations after changes l average 0.9mm
5 EN 13329 : 2006
in relative humidity w average 0.9mm
Blue wool scale, not worse than 6,
6 Light Fastness EN 13329 : 2006
Grey scale, not worse than 4
7 Resistance to cigarette burns EN 13329 : 2006 Grade 4
5, groups 1 and 2
8 Resistance to Staining EN 13329 : 2006
4, group 3
9 Effect of furniture leg EN 13329 : 2006 No damage shall be visible, when tested with foot type 0

10 Effect of a castor chair EN 425 No change in appearance or damage

11 Thickness Swelling EN 13329 : 2006 18.0%

12 Formaldehyde Emission EN 717 E1 value : 0.125mg/m3=0.1ppm

The maximum dimension tolerances are according to EN 13329: 2006 table 1

Page : 1 / 1
Doc. No.: TDS-PU-24K08-R0

You might also like