Scribd
Upload
43 views3 pages

Bc-Wifi Setup Guide For Android Devices: 1) Navigate To The Settings Menu On Your Device, and Then Select Wi-Fi Settings

This document provides instructions for connecting an Android device to the BC-WiFi network. It explains that the menus may vary by device version but the settings are the same. Users should navigate to the Wi-Fi settings, select the BC-WiFi network if available, and enter their BC email username and password using TTLS authentication and PAP phase 2 authentication. Once connected, the device will be on the BC-WiFi network.

Uploaded by

Sarah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views3 pages

Bc-Wifi Setup Guide For Android Devices: 1) Navigate To The Settings Menu On Your Device, and Then Select Wi-Fi Settings

This document provides instructions for connecting an Android device to the BC-WiFi network. It explains that the menus may vary by device version but the settings are the same. Users should navigate to the Wi-Fi settings, select the BC-WiFi network if available, and enter their BC email username and password using TTLS authentication and PAP phase 2 authentication. Once connected, the device will be on the BC-WiFi network.

Uploaded by

Sarah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BC-WiFi Setup Guide for Android Devices

NOTE: There are many different versions of the Android operating system. Because of this, the menus and layout on
your device may appear a bit differently from what you see below. However, the settings you must enter should
remain the same, regardless of the device.

1) Navigate to the Settings menu on your device, and then select Wi-Fi settings.

2) Select BC-WiFi from the available Wi-Fi networks. If you are unable to see BC-WiFi, then there is no
wireless signal in your current location.
3) You must use the following credentials:

EAP Method: TTLS


Phase 2 authentication: PAP
Identity: Your BC E-Mail username
For Students, enter your BC E-mail ID followed by @bcacad.local (e.g. [email protected])
For Staff/Faculty, this is only the part that appears before @brooklyn.cuny.edu
Password: Your BC E-Mail password

All other options should remain unchanged.

Click on Connect to finish. After a few moments, you should be connected to BC-WiFi.

You might also like