Remote operated wall painting machine

1
2
3
4
all these the interior wall painting has shared little in research
activities. The painting chemicals can cause hazards to the
painters such as eye and respiratory system problems. Also the
nature of painting procedure that requires repeated work and hand
1. Abstract rising makes it boring, time and effort consuming. These factors
The primary aim of the project is to design, develop motivate the development of an automated machine painting
and implement Automatic Wall Painting Machine system. This project aims to develop the interior wall painting
which helps to achieve low cost painting equipment. machine. This automatic wall painting machine is not designed
Despite the advances in machineics and its wide using complicated components. This machine is simple and
spreading applications, interior wall painting has shared
portable. The machine is designed using few steels, conveyor
little in research activities. The painting chemicals can
cause hazards to the human painters such as eye and shaft, spray gun and a controller unit to control the entire
respiratory system problems. Also the nature of operation of the machine. This machine is compact because of
painting procedure that requires repeated work and high speed and pressure capabilities they have. They also have a
hand rising makes it boring, time and effort consuming. very small weight to power output ratio and predictable
When construction workers and machines are properly performance ie., losses are minimum due to less number of
integrated in building tasks, the whole construction moving parts and so gives expected performance. Due to elegant
process can be better managed and savings in human
and simple control systems it can control noise vibration and does
labour and timing are obtained as a consequence. In
addition, it would offer the opportunity to reduce or silent operation and no vibration is produced. It has longer life,
eliminate human exposure to difficult and hazardous flexibility and it is efficient and dependable, and the installation is
environments, which would solve most of the problems simple and the maintenance is also easy. Some of the conditions
connected with safety when many activities occur at the that have to be considered while using this machine is that the
same time. These factors motivate the development of system is operates in pneumatics, so it needs air tank or
an automated machining painting system. compressor and the electric shock is always there, which makes
Introduction the machines ugly and dust and dirt are adhering to them. The life
of the parts like seals, packing and gaskets etc., are very short but,
Building and construction is one of the major they are essential to prevent leakage so that the system becomes
industries around the world. In this fast moving life
costlier.
construction industry is also growing rapidly. But the
labors in the construction industry are not sufficient.
This insufficient labors in the construction industry is WORKING
because of the difficulty in the work. In construction In the Remote Operated Spray Painting Machine, to start the
industry, during the work in tall buildings or in the sites system switch ON the power supply with the help of 230v
where there is more risky situation like interior area in charger which connected to the dc machines to drive the machin.
the city. There are some When the machine is stared, system gets initialize. Now the
other reasons for the insufficient labor which may be system can move in x-axis with the help of basement wheel
because of the improvement the education level which mechanism system. After performing this operation, spray gun
cause the people to think that these types of work is not can move in y-axis easily with the help of next steel frame and
as prestigious as the other jobs. The construction steel threaded rods. When system is in x and y axis 70% surface
industry is labor-intensive and conducted in dangerous can be cover. In this way, the whole operation can perform easily
situations; therefore the importance of construction and safely.
machine has been realized and is grown rapidly.
Applications and activities of machine and automation
in this construction industry started in the early 90‟s
aiming to optimize equipment operations, improve Component of system
safety, enhance perception of workspace and Frame stand
furthermore, ensure quality environment for building Wheel
occupant. After this, the advances in the machine and DC motor
automation in the construction industry has grown Control unit
rapidly. Despite the advances in the machine and its Spray gun mount
wide spreading applications, painting is also considered Sprocket
Spray gun
to be the difficult process as it also has to paint the Transformer
whole building. To make this work easier and safer and Chain
also to reduce the number of labors automation in Bearing
painting was introduced. The automation for painting Advantages
the exterior wall in buildings has been proposed. Above 1. The mechanism has very low error.
2. The size of project made by is more suitable for wall In the future, we would like to expand features & application of the
painting system. painting machine by using image processing in order to scan the
objects and obstruction that are present in the wall so that the painting
3. The cost of machine is less. can be completed in graceful manner.
10. REFERENCES
4. It is easy to make. [1]. Mohamed Abdellatif “Design of An Autonomous Wall Painting
Machine” Mechatronic and Machineic Dept. Egypt-Japan Univercity
5. It has low maintenance. of Science and Technology, Alexandria, Egypt, 7 February 2016.
[2]. Dhaval Thakar, Chetan P. Vora “A Review on Design and
6. Skilled operator required Development of Semi Automatic Painting Machine’’ Int. Journal of
Engineering Research and Applications, ISSN : 2248-9622, Vol. 4,
7. Size of machine is small therefore it is easy to Issue 4( Version 7), April 2014.
installation.
[3]. P.Keerthanaa1, K.Jeevitha2, V.Navina3, G.Indira4, S.Jayamani5
8. Weight of machine is low. “Automatic Wall Painting Machine” International Journal of
Innovative Research in Science, Engineering and Technology Vol. 2,
Issue 7, July 2013
Disadvantages [ 4]. Berardo Naticchia, Alberto Giretti and Alessandro Carbonari
1. Being automatic we cannot neglect power supply “Set Up of an Automated Multicolour System for Interior Wall
system. Painting” International Journal of Advanced Machineic Systems,
Vol. 4, No. 4 (2007)
ISSN 1729-8806, pp. 407-416
Application of project [5]. Takuya Gokyu, Masayuki Takasu, Sumio Fukuda “Development
1. Use in all types of painting wall / car. of Wall Painting Machine” Tokyu Construction Co. Ltd. 1-16-14
Shibuya-ku , Tokyo, Japan.
2. In industries purpose. [6]. Pål Johan & Jan Tommy Gravdahl “A Real-Time Algorithm for
Determining the Optimal Paint Gun Orientation in Spray Paint
3. Can be used in engg. Workshop. Applications” IEEE transactions on automation science and
engineering, vol. 7, no. 4, october 2010.
4. Use in domestic purpose.
[7]. Praneet Singh, Deepanshu Suneja, Prachi, Jitendra Kumar
“Android Based, Arduino Powered Automated Wall” Praneet Singh
CONCLUSIONS et al, / (IJCSIT) International Journal of Computer Science and
The technique of remote operated spray painting machine Information Technologies, Vol. 5 (3) , 2014, 4490-4491
is presented here