LCS 2400
SENSORS’ SMOKE METER FOR VEHICLE INSPECTION & MAINTENANCE
The Sensors’ LCS Smoke Meter is designed to measure the smoke
emissions of diesel cars and trucks. The system is designed to meet
any current national specification for emission inspection programs
for diesel vehicles on the road. It is much smaller and lighter than
most of the smoke transducers available on the market today,
making it more economical to operate.
The LCS uses the partial-stream measuring technique, which
provides for direct and continuous measurement of the smoke
sample. The technique measures the amount of light blocked by the
sample on a scale of zero opacity to black with zero obscurity
indicating no smoke in the sample cell and black indicating that the
tube is completely blocked.
The light source is a pulsed green LED with a peak at 560 nm. The
detector is a solid state GaAs device and is heated to 45° C to
temperature compensate the output signal. The system is controlled
by a Motorola MC9S12E64 16bit micro-controller. The LCS software
is fully compatible with Sensors’ smoke transducers LCS 2000-
2200, why LCS 2400 is therefore considered to be a true “drop in
replacement” device for those predecessors.
LCS2400 similarity to its predecessors should allow for easy and
fast certification in all countries where LCS2000 is approved
already.
Features
Compliance/Certification • Small Size & Weight
ISO 11614 • High Reliability
German (PTB) EO 18-09 • Proper power detection
French (UTAC) NF R 10-025 • Eletric. 50% Linearity
Spanish (CEM) UNE 82503 Check
UL 201/CSA • Free accel. & loaded
CE label & TÜV Safety
mode (special probe)
Sensors, Inc. ▫ 6812 S. State Road ▫ Saline, Michigan ▫ USA ▫ +1 (734) 429 – 2100
Sensors Europe GmbH ▫ Feldheider St. 60 ▫ 40699 Erkrath ▫ Germany ▫ +49-(0)2104-14188-0
www.sensors-inc.com
LCS 2400
SENSORS’ SMOKE METER FOR VEHICLE INSPECTION & MAINTENANCE
PRODUCT SPECIFICATIONS:
Operating Conditions
Temperature: 5 °C to 40 °C
Humidity: 0 to 95 %
Pressure: 0...10kPa ± 0.2kPa
Characteristics
Optical path length: 364 mm (+/- 1 mm)
Tube Temp: 70…100 °C (75 °C typical)
Warm Up Time: <= 3 min. @ 20 °C
Zero-Drift: < 0.01 m-1 over 15 min
Resolution: N: 0.1 % ; k: 0.01 m-1
Gas Temperature Range: 10 – 150 °C
Storage Temperature: -32 °C to 55 °C
Pneumatic Stability: ± 1.0%
Acoustic Noise: 53 dba
Opacity Accuracy: ± 2% absolute
Reliability: 20,000 hours (MTBF)
Dimensions (H x W x L): 23.5 cm x 38 cm x 9 cm
Weight: 4.5kg (10 lbs)
Software & Communications 9600/19200 Baud rate (selectable)
Communication: via RS-232 async
Power:
Input 230 Vac,, 115Vac or 100Vac available
Line Frequency: 50 or 60 Hz
Output 12Vdc @3A (via com port connector)
Disclaimer:
Specifications are subject to change without notice.
While due caution has been exercised in the production of this document, possible errors and omissions are
unintentional.
Sensors, Inc. ▫ 6812 S. State Road ▫ Saline, Michigan ▫ USA ▫ +1 (734) 429 – 2100
Sensors Europe GmbH ▫ Feldheider St. 60 ▫ 40699 Erkrath ▫ Germany ▫ +49-(0)2104-14188-0
www.sensors-inc.com
