Scribd
Upload
2K views9 pages

Updating Firmware of SIM808 BT Function

1. The document discusses updating the firmware of a SIM808 module to enable its Bluetooth functionality. 2. It provides the necessary materials, including a SIM808 shield, USB to serial adapter, SIMCOM download tool, and new firmware file. 3. The steps describe using the download tool to select the SIM808 as the target, COM port, and firmware file, then starting the download which progresses as the shield is restarted and updates over several minutes.

Uploaded by

Stefan S Kiraly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views9 pages

Updating Firmware of SIM808 BT Function

1. The document discusses updating the firmware of a SIM808 module to enable its Bluetooth functionality. 2. It provides the necessary materials, including a SIM808 shield, USB to serial adapter, SIMCOM download tool, and new firmware file. 3. The steps describe using the download tool to select the SIM808 as the target, COM port, and firmware file, then starting the download which progresses as the shield is restarted and updates over several minutes.

Uploaded by

Stefan S Kiraly
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
  • Updating SIM808 Firmware: Provides an overview of the SIM808 firmware update process, detailing its features and components involved.
  • Preparation Steps: Explains the preparation required before running the download tool, including configurations needed.
  • Tool Configuration and Setup: Describes how to configure and set up the download tool by selecting appropriate options for firmware type and communications port.
  • Choosing and Uploading Firmware: Details the process to select the correct firmware file, setting the COM port and baud rate, and initiating the upload.
  • Starting the Download Process: Guides through clicking the start download button and monitoring the download progress for the SIM808 device.
  • Final Steps and Monitoring: Provides instructions for turning on the SIM808 shield and monitoring the firmware update process via the tool's interface until completion.
  • Completion and Exit: Covers final steps on completing the update process, ensuring the update finishes properly, and safely exiting the tool.

Updating firmware of SIM808 BT function

The SIM808 GSM/GPRS/GPS/Bluetooth module from SIMCOM offers a lot of features


like,SD card interfacing, GSM/GPRS functionality,GPS functionality, Bluetooth
functionality, FM etc.. In most cases a firmware update is required to avail these
features. This post is intended to give an idea about how to update the firmware of
SIM808 modules that let it have a Bluetooth functionality.

What you need:


1. Elecrow SIM808 GSM/GPRS/GPS Shield
2. A USB to Serial (either USB to TTL or USB to RS232 )
3. SIMCOM series download tool.(Click Here to Download)
4. A new firmware file to upload to the modules.(Click Here to Download)

Steps:
1. Connect the SIM808 shield to the computer using the USB to Serial device.Here I
use a USB Serial Adapter (based on RS232 ). There is no need to power on the
sim808 shield right now.
2. Now open the download tool.You should run the tool as administrator. The tool will
be inside the folder as shown below
3. When you open the tool you will get a window like below. I have tested this tool
with a SIM 800 modem. You can choose the modem type from the Target box
(Marked as 1) . Depending upon the target the window may vary.

Details of the select boxes


1.Target: Choose the target to which the firmware is to be uploaded. Here I choose
SIM808

2.Port Type: Since we are updating the firmware through the UART pins of SIM808
module choose UART. There is another option USB, which can be used to update the
firmware through the debug UART port (which obviously we are not selecting).
3.Now select the COM port to which the IM808 module is connected. You can check
this under device manger\ports. (While I was testing, this port number appeared in
the tool only when I did run it as administrator).

4.Choose the baud rate as 115200.

5.Now select the firmware file to be uploaded. Click the image folder button and
browse to the location of the firmware file.

Now open the file selected.


Now a set of files gets
listed in the window in the
middle of the tool. (In my
figures files are already
listed because I have tested
this software already.)

6.
In
this box, you can choose the erase type. Either you can erase the source code only
or you can erase both the source code and user data.

7.Now press the “Start Download” button

8.

You will see the timer, left to the “Start Download” button begins.
9.

Turn ON the sim808 shield now if it is OFF or Restart it. (This is very important. You
have to restart the sim808 shield after pressing the “Start Download” Button. Then
only the firmware updating process begins). And you can see the progress bar
moving.
10.Now wait for some time. The updating process takes a few minutes to complete.
And the progress bar changes colour in between the updating process. Once the
update process is completed the timer will stop. Then you can press the exit button
to close the tool.

Updating firmware of SIM808 BT function The SIM808 GSM/GPRS/GPS/Bluetooth module from SIMCOM offers a lot of features like,SD
2. Now open the download tool.You should run the tool as administrator. The tool will be inside the folder as shown below
3. When you open the tool you will get a window like below. I have tested this tool with a SIM 800 modem. You can choose the
3.Now select the COM port to which the IM808 module is connected. You can check this under device manger\ports. (While I was
this box, you can choose the erase type. Either you can erase the source code only or you can erase both the source code an
9. Turn ON the sim808 shield now if it is OFF or Restart it. (This is very important. You have to restart the sim808 shield
10.Now wait for some time. The updating process takes a few minutes to complete. And the progress bar changes colour in betw

You might also like