TITLE

TITLE
TITLE
TITLE
TITLE
TITLE

STUDENT’S NAME

Diploma Kemahiran Malaysia

KOLEJ VOKASIONAL SULTAN AHMAD

SHAH
 UNIVERSITI MALAYSIA PAHANG

DECLARATION OF THESIS AND COPYRIGHT

Author’s Full Name : ___________________________________________________

Date of Birth : _____________________________________________________

Title : _____________________________________________________

_____________________________________________________

_____________________________________________________

Academic Session : _____________________________________________________

I declare that this thesis is classified as:

 CONFIDENTIAL (Contains confidential information under the Official

Secret Act 1997)*
 RESTRICTED (Contains restricted information as specified by the
organization where research was done)*
 OPEN ACCESS I agree that my thesis to be published as online open access
(Full Text)

I acknowledge that Universiti Malaysia Pahang reserve the right as follows:

1. The Thesis is the Property of Universiti Malaysia Pahang

2. The Library of Universiti Malaysia Pahang has the right to make copies for the purpose
of research only.
3. The Library has the right to make copies of the thesis for academic exchange.

Certified by:

_____________________ _______________________
(Student’s Signature) (Supervisor’s Signature)

_____________________ _______________________
New IC/Passport Number Name of Supervisor
Date: Date:

NOTE : * If the thesis is CONFIDENTIAL or RESTRICTED, please attach with the letter page 2 from
the organization with the period and reasons for confidentiality or restriction.
 THESIS DECLARATION LETTER (OPTIONAL)

Librarian,
Perpustakaan Universiti Malaysia Pahang,
Universiti Malaysia Pahang,
Lebuhraya Tun Razak,
26300, Gambang, Kuantan.

Sir,

CLASSIFICATION OF THESIS AS RESTRICTED

Please be informed that the following thesis is classified as RESTRICTED for a period of three
(3) years from the date of this letter. The reasons for this classification are as listed below.

Author’s Name
Thesis Title

Reasons (i)

(ii)

(iii)

Thank You.

Sincerely yours,

_____________________________
(Supervisor’s Signature)

Date:

Stamp:

Notes : This letter should be written by the supervisor, addressed to Perpustakaan Universiti
Malaysia Pahang and a copy attached to the thesis.
 PERAKUAN PENYELIA PROJEK (PP)

“Saya dengan ini memperakui bahawa telah membaca laporan ini dan segala yang
terkandung di dalama dalah benar. Projek ini adalah memadai dari segi skop dan
kualiti serta telah memenuhi segala syarat dan undang-undang di bawah peraturan
Kolej Vokasional bagi tujuan penganugerahan Diploma Teknologi Elektronik dan
Diploma Kemahiran Malaysia.”

Tandatangan : ……………………………………….
Nama : ……………………………………….
No. Kad Pengenalan : ……………………………………….
Tarikh : ……………………………………….

PERAKUAN PEGAWAI PENGESAH LUARAN (PPL)

“ Saya mengaku telah membaca Laporan Projek ini dan pada pandangan saya,
laporan ini adalah mencukupi dan memenuhi skop dan kualiti bagi tujuan
penganugerahan Persijilan Kemahiran Malaysia.”

Tandatangan : ……………………………………….
Nama : ……………………………………….
No. Kad Pengenalan : ……………………………………….
Tarikh : ……………………………………….
 PENGAKUAN PENULIS

“Dengan ini saya akui bahawa laporan ini adalah hasil kerja saya sendiri dan dibuat
berdasarkan undang-undang yang termaktub di bawah peraturan Kolej Vokasional. Ia
adalah asli berpandukan daripada kajian yang telah dilakukan oleh saya. Projek ini
masih belum dihasilkan oleh mana-mana pihak atau institusi untuk mana-mana diploma
atau kelayakan.

Saya dengan ini berjanji sekiranya projek yang dilaksanakan oleh saya melanggar
mana-mana syarat yang tertera di atas, segala hasil kerja saya akan di gagalkan dan
didapati sebagai tidak melengkapkan diploma dan bersetuju untuk dikenakan sebarang
tindakan undang-undang di bawah peraturan Kolej Vokasional.”

Nama Penulis 1 : …………………………..........….

Tandatangan : .....................................................
No Kad Pengenalan : .....................................................

Nama Penulis 2 : …………………………..........…...

Tandatangan : .....................................................
No Kad Pengenalan : ....................................................

Nama Penulis 3 : …………………………..........…...

Tandatangan : .....................................................
No Kad Pengenalan : .....................................................

Program : …………………………….............
Nama Kolej : …………………………….............
Tajuk Projek : ……………………………............
Tarikh : ……………………………............
Penyelia Projek : ……………………..........………...
Tandatangan : ....................................................
 TITLE
TITLE
TITLE
TITLE

STUDENT’S NAME

Laporan Projek Yang Dikemukakan Kepada Kolej Vokasional Seri

Iskandar Bagi Memenuhi Sebahagian Daripada Keperluan Diploma
Teknologi Elektronik dan Diploma Kemahiran Malaysia Eksekutif
Teknologi Elektronik Audio Visual (EE-010-4)

PROGRAM TEKNOLOGI
ELEKTRONIK/KIMPALAN/PEMBINAAN/PENYEJUKKAN DAN
PENYAMANAN UDARA/PENGURUSAN PERNIAGAAN

2015
 PENGHARGAAN

On the Insert tab, the galleries include items that are designed to coordinate with the
overall look of your document. You can use these galleries to insert tables, headers,
footers, lists, cover pages, and other document building blocks. When you create pictures,
charts, or diagrams, they also coordinate with your current document look.

You can easily change the formatting of selected text in the document text by choosing a
look for the selected text from the Quick Styles gallery on the Home tab. You can also
format text directly by using the other controls on the Home tab. Most controls offer a
choice of using the look from the current theme or using a format that you specify
directly.

To change the overall look of your document, choose new Theme elements on the Page
Layout tab. To change the looks available in the Quick Style gallery, use the Change
Current Quick Style Set command. Both the Themes gallery and the Quick Styles gallery
provide reset commands so that you can always restore the look of your document to the
original contained in your current template.

ii
 ABSTRAK

On the Insert tab, the galleries include items that are designed to coordinate with the
overall look of your document. You can use these galleries to insert tables, headers,
footers, lists, cover pages, and other document building blocks. When you create pictures,
charts, or diagrams, they also coordinate with your current document look. You can easily
change the formatting of selected text in the document text by choosing a look for the
selected text from the Quick Styles gallery on the Home tab. You can also format text
directly by using the other controls on the Home tab. Most controls offer a choice of using
the look from the current theme or using a format that you specify directly. To change
the overall look of your document, choose new Theme elements on the Page Layout tab.
To change the looks available in the Quick Style gallery, use the Change Current Quick
Style Set command.

iii
 ABSTRACT

On the Insert tab, the galleries include items that are designed to coordinate with the
overall look of your document. You can use these galleries to insert tables, headers,
footers, lists, cover pages, and other document building blocks. When you create pictures,
charts, or diagrams, they also coordinate with your current document look. You can easily
change the formatting of selected text in the document text by choosing a look for the
selected text from the Quick Styles gallery on the Home tab. You can also format text
directly by using the other controls on the Home tab. Most controls offer a choice of using
the look from the current theme or using a format that you specify directly. To change
the overall look of your document, choose new Theme elements on the Page Layout tab.
To change the looks available in the Quick Style gallery, use the Change Current Quick
Style Set command. Both the Themes gallery and the Quick Styles gallery provide reset
commands so that you can always restore the look of your document to the original
contained in your current template.

iv
 TABLE OF CONTENT

DECLARATION

TITLE PAGE i

CHAPTER 1 INTRODUCTION 1

1.1 UMP Thesis Template 1

1.1.1 Developer Tab 1

1.1.2 Navigation Pane 2

1.1.3 Styles 3

1.2 Summary 5

CHAPTER 2 STYLES 6

2.1 Heading 1 6

2.2 Heading 2 6

2.2.1 Heading 3 6

2.3 Other important styles 6

2.4 Equations 7

2.5 Quote 7

2.6 Table 8

CHAPTER 3 METHODOLOGY 9

3.1 Introduction 9

CHAPTER 4 RESULT & DISCUSSION 10

4.1 Introduction 10

v
CHAPTER 5 CONCLUSION 11

5.1 Introduction 11

vi
 LIST OF TABLES

Table 2.1 Sample table 8

vii
 LIST OF FIGURES

Figure 1.1 Enabling the Developer Tab 2

Figure 1.2 Navigation Pane 3
Figure 1.3 Enabling Styles Pane 4
Figure 1.4 Syles Pane on right side of the window, listing all recommended styles
for selection 5

viii
LIST OF SYMBOLS

ix
LIST OF ABBREVIATION

x
 CHAPTER 1

INTRODUCTION

1.1 UMP Thesis Template

Thesis formatting has long been one of the nightmares for every postgraduate
candidate. More often than not, students find themselves spend more time than they
expected in formatting their thesis. Starting from 2016, Universiti Malaysia Pahang
(UMP) provides Microsoft Word template for thesis formatting to the postgraduates. This
module aims to guide the user (both postgraduates and undergraduates) to use the
template effectively. The module is written in procedural based manner; where step by
step instructions are given with appropriate visual aids. It is designed to be best read with
self-practice on computer simultaneously.

This document is the template created to ease the thesis writing. The file is in
.dotx extension, a dedicated file extension for template in Microsoft Word. Before this
template is applied, it is important that you get your computer ready. There are several
Microsoft Word features that you should enable first.

1.1.1 Developer Tab

To create a new thesis based on this template, just double click the file. A new
document will open in Microsoft Word, normally named Untitled.docx. You can start put
your content in that file without having to worry about the thesis formatting. However, if
you want to apply this dotx template to your current thesis, you need to enable the
Developer Tab option. To do so, please refer to Figure 1.1.

1
Figure 1.1 Enabling the Developer Tab
Source: Zuli (2016). Use style named Citation for Table and Figure UMP for any text
here.

1.1.2 Navigation Pane

Navigation pane is where you can browse through your thesis based on its heading
name. To enable it, please refer to Figure 1.2. The option to enable navigation pane
resides in View ribbon.

2
Figure 1.2 Navigation Pane

1.1.3 Styles

The basic of applying template is Styles. Styles is predefined formatting of text

and paragraph. It is most efficient that you put the Styles pane on the right side of the
Microsoft Word working environment by click a small arrow as shown in Figure 1.3. If
your pane is floating, click and hold the windows and put it at the right side of the
windows.

3
Figure 1.3 Enabling Styles Pane

Once secured on the right side of the working environment, the Styles Pane should
look like Figure 1.4.

4
Figure 1.4 Syles Pane on right side of the window, listing all recommended styles
for selection

1.2 Summary

Once the PC is ready, you can familiarize yourself with the styles in this template.
Some of the styles will be explained in Chapter 2.

5
 CHAPTER 2

STYLES

2.1 Heading 1

Heading 1 is used for chapter naming. In this template, it is called Heading 1,

UMP Chapter Title. In most cases, thesis will have around five to seven chapters.

2.2 Heading 2

The styles used for this subchapter 2.2 is Heading 2, UMP Level 2.

2.2.1 Heading 3

The heading for Subchapter 2.2.1 is formatted with Heading 3, UMP Level 3.

2.2.1.1 Heading 5

In this template, Heading 4 is not used. Instead, the heading for level 4 will be
using the Heading 5, UMP Level 4. That is all the heading styles needed to format a
thesis.

2.3 Other important styles

All styles developed in this template is essential to a proper thesis formatting. The
most widely used style is UMP Paragraph. This very paragraph is formatted by UMP
Paragraph syles.

Another important one is the caption styles. All pictures in this template are
formatted by using Caption for Equation styles.

6
2.4 Equations

As shown in Equation 2.1, all equations must be systematically numbered. To

insert any equation, copy the whole equation and numbering below and paste on your
desired location. After that, edit the equation. The style for equation is Caption for
Equation UMP.

y  mx  c 2.1

The paragraph after an equation of a figure, has to be formatted in UMP

Paragraph 2. This is to allow some space between the paragraph and the equation or the
figure’s caption. This paragraph is using UMP Paragraph 2 style.

2.5 Quote

To insert a quote like this, use Quotation UMP style. Please ensure all quotation
are properly cited.

On the Insert tab, the galleries include items that are

designed to coordinate with the overall look of your
document. You can use these galleries to insert tables,
headers, footers, lists, cover pages, and other document
building blocks. When you create pictures, charts, or
diagrams, they also coordinate with your current
document look. You can easily change the formatting of
selected text in the document text by choosing a look for
the selected text from the Quick Styles gallery on the Home
tab. You can also format text directly by using the other
controls on the Home tab. Most controls offer a choice of
using the look from the current theme or using a format
that you specify directly. Video provides a powerful way to
help you prove your point. When you click Online Video,
you can paste in the embed code for the video you want to
add. You can also type a keyword to search online for the
video that best fits your document. To make your document
look professionally produced, Word provides header,
footer, cover page, and text box designs that complement
each other. For example, you can add a matching cover
page, header, and sidebar. Click Insert and then choose
the elements you want from the different galleries.

7
2.6 Table

The text in paragraph can be formatted using Table text style. On the other hand,
the style for table’s caption is called Caption for Table UMP.

Table 2.1 Sample table

Test Text
Test Text
Test Text
Test Text
Test Text
Source: Rahman (2007)

8
 CHAPTER 3

METHODOLOGY

3.1 Introduction

9
 CHAPTER 4

RESULT & DISCUSSION

4.1 Introduction

10
 CHAPTER 5

CONCLUSION

5.1 Introduction

11
 REFERENCES

Use reference manager such as Mendeley or Endnote to generate references list here.

12
 APPENDIX A
SAMPLE APPENDIX 1

For Appendices Heading use TITLE AT ROMAN PAGES style.

13
 APPENDIX B
SAMPLE APPENDIX 2

For Appendices Heading use TITLE AT ROMAN PAGES style.

14