38 I Renold Transmission Chain Catalogue

Standard Attachments
Section 1

Clockwise from top

K2 attachment, M1 attachment,
extended bearing pin & K1 attachment
 Renold Transmission Chain Catalogue I 39

Standard Attachments
European (BS) Standard / ISO 606

Section 1
Renold standard power transmission chain can Note: 1. K2 attachments cannot be Bearing pins with an extension on one side of
be adapted for conveying duties by the fitment assembled on adjacent inner and the chain can be built into chain at any desired
of attachments shown on these pages. The outer links on the same side of pitch spacing and afford a simple means by
attachments can be assembled on one or both the chain. which attachments or tubular staybars may be
sides of the chain at any desired pitch spacing. secured to chain. The pins for BS/DIN series
2. M1 attachments cannot be
chain are grooved for standard external type
assembled next to a No. 30
circlips to BS 3673 Part 2 (not supplied) so
Cranked link double joint.
that, if required, attachments may be retained
endwise or can be supplied as a standard
straight extended pin.

No.4 No.26
Inner link Connecting
link-spring
clip

No.107
Outer link

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Conn. Link ISO606 Weight
Chain Ref. (inch) (mm) Width Diam. Height Width Width Diam. Length Extension Tensile
No. Inner Outer Strength
(Newtons) kg/m
MIN MAX MAX MAX MAX MAX MAX MAX MIN

European (BS) Standard - Simplex

A A B C D E F G H1 J K
08B1 08B-1 0.500 12.700 7.75 8.51 11.81 1.55 1.55 4.45 17.0 3.9 17800 0.70
10B1 10B-1 0.625 15.875 9.65 10.16 14.73 1.55 1.55 5.08 19.6 4.1 22200 0.92
12B1 12B-1 0.750 19.050 11.68 12.07 16.13 1.80 1.80 5.72 22.7 4.6 28900 1.20
16B1 16B-1 1.000 25.400 17.02 15.88 21.08 4.12 3.10 8.28 36.1 5.4 60000 2.80
20B1 20B-1 1.250 31.750 19.56 19.05 26.42 4.62 3.61 10.19 43.2 6.1 95000 3.85
24B1 24B-1 1.500 38.100 25.40 25.40 33.40 6.10 5.08 14.63 53.4 6.6 160000 7.45
 40 I Renold Transmission Chain Catalogue

K1 Attachments
Renold & ISO 606
Section 1

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold Standard
A A E F w h d g T U
08B1 08B 0.500 12.700 1.57 1.57 11.56 8.89 4.19 6.80 23.80 37.92
10B1 10B 0.625 15.875 1.57 1.57 12.83 10.16 4.98 6.80 31.75 44.45
12B1 12B 0.750 19.050 1.83 1.83 16.64 13.49 7.14 8.02 38.10 59.66
16B1 16B 1.000 25.400 4.06 3.10 24.32 15.24 6.68 10.27 47.63 74.45
20B1 20B 1.250 31.750 4.62 3.61 25.59 19.84 8.08 12.58 63.50 93.62

ISO Standard
A A E F w h d g T U
1161 04 0.236 6.000 0.57 0.57 5.8 4.5 2.3 2.5 11.2 17.6
05B1 05B 0.315 8.000 0.73 0.73 7.8 5.3 2.3 3.4 13.5 21.5
06B1* 06B 0.375 9.525 1.25 1.00 8.0 6.7 3.3 4.1 19.6 28.5
08B1 08B 0.500 12.700 1.51 1.51 11.0 8.9 4.3 5.9 25.4 41.7
10B1 10B 0.625 15.875 1.51 1.51 14.0 10.3 5.3 6.8 31.8 49.0
12B1 12B 0.750 19.050 1.76 1.76 18.0 13.5 6.6 8.1 38.1 52.7
16B1 16B 1.000 25.400 3.70 3.00 24.0 15.9 6.6 10.5 50.8 85.6
20B1 20B 1.250 31.750 4.40 3.50 30.0 19.9 8.4 13.2 63.5 101.0
24B1 24B 1.500 38.100 5.40 5.00 36.0 28.0 10.5 16.7 88.0 124.7

* Straight plate
 Renold Transmission Chain Catalogue I 41

K2 Attachments
Renold & ISO 606

Section 1
Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold Standard
A A E F h d g w s T U
08B1 08B 0.500 12.700 1.57 1.57 8.890 4.85 6.80 24.50 12.700 25.40 40.46
10B1 10B 0.625 15.875 1.57 1.57 10.160 4.98 6.80 29.97 15.875 31.75 45.57
12B1 12B 0.750 19.050 1.83 1.83 11.430 5.54 8.02 35.48 19.050 34.93 51.13
16B1 16B 1.000 25.400 4.06 3.10 15.875 8.08 10.27 45.91 25.400 57.15 78.26
20B1 20B 1.250 31.720 4.62 3.61 19.840 8.08 12.58 58.10 31.750 63.50 93.62

ISO Standard
A A E F h d g w s T U
1161 04 - 6.000 0.57 0.57 4.5 2.3 2.5 11.1 6.0 11.2 17.6
05B1 05B - 8.000 0.73 0.73 5.3 2.3 3.4 14.8 8.0 13.5 21.5
06B1* 06B 0.375 9.525 1.25 1.00 6.7 3.3 4.1 19.6 9.5 19.6 28.5
08B1 08B 0.500 12.700 1.51 1.51 8.9 4.3 5.9 24.4 12.7 25.4 41.7
10B1 10B 0.625 15.875 1.51 1.51 10.3 5.3 6.8 29.9 15.9 31.8 49.6
12B1 12B 0.750 19.050 1.76 1.76 13.5 6.6 8.1 35.4 19.0 38.1 48.8
16B1 16B 1.000 25.400 3.70 3.00 15.9 6.6 10.5 46.2 26.4 50.8 85.6
20B1 20B 1.250 31.750 4.40 3.50 19.9 8.4 13.2 57.0 31.7 63.5 101.0
24B1 24B 1.500 38.100 5.40 5.00 28.0 10.5 16.7 71.5 38.1 88.0 124.7

* Straight plate
 42 I Renold Transmission Chain Catalogue

M1 Attachments
Renold & ISO 606
Section 1

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold Standard
A A E F w e f d g
08B1 08B 0.500 12.700 1.57 1.57 11.56 19.00 12.700 4.19 6.80
10B1 10B 0.625 15.875 1.57 1.57 12.83 22.54 15.875 4.98 6.80
12B1 12B 0.750 19.050 1.83 1.83 16.64 31.98 22.230 7.14 8.02
16B1 16B 1.000 25.400 4.06 3.10 24.32 34.13 23.800 6.73 10.27
20B1 20B 1.250 31.750 4.62 3.61 25.59 46.02 31.750 8.20 12.58

ISO Standard
A A E F w e f d g
1161 04 - 6.000 0.57 0.57 5.80 10.0 6.8 2.3 2.5
05B1 05B - 8.000 0.73 0.73 7.80 11.9 8.6 2.3 3.4
06B1* 06B 0.375 9.525 1.25 1.00 8.00 14.5 10.1 3.3 4.1
08B1 08B 0.500 12.700 1.51 1.51 11.00 20.8 13.0 4.3 5.9
10B1 10B 0.625 15.875 1.51 1.51 14.00 24.9 16.5 5.3 6.8
12B1 12B 0.750 19.050 1.76 1.76 18.00 28.2 21.0 6.6 8.1
16B1 16B 1.000 25.400 3.70 3.00 24.00 39.7 23.0 6.6 10.5
20B1 20B 1.250 31.750 4.40 3.50 30.00 47.5 30.5 8.4 13.2
24B1 24B 1.500 38.100 5.40 5.00 36.00 61.5 42.7 10.5 16.7

* Straight plate
 Renold Transmission Chain Catalogue I 43

M2 Attachments
ISO 606

Section 1
Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

ISO Standard
A A E F e f d g w s
1161 04 - 6.000 0.57 0.57 10.0 6.8 2.3 2.5 11.1 6.0
05B1 05B - 8.000 0.73 0.73 11.9 8.6 2.3 3.4 14.8 8.0
06B1* 06B 0.375 9.525 1.25 1.00 14.5 10.1 3.3 4.1 17.6 9.5
08B1 08B 0.500 12.700 1.51 1.51 20.8 13.0 4.3 5.9 24.4 12.7
10B1 10B 0.625 15.875 1.51 1.51 24.9 16.5 5.3 6.8 29.9 15.9
12B1 12B 0.750 19.050 1.76 1.76 28.2 21.0 6.6 8.1 35.4 19.0
16B1 16B 1.000 25.400 3.70 3.00 39.7 23.0 6.6 10.5 46.2 25.4
20B1 20B 1.250 31.750 4.40 3.50 47.5 30.5 8.4 13.2 57.0 31.7
24B1 24B 1.500 38.100 5.40 5.00 61.5 42.7 10.5 16.7 71.5 38.1

* Straight plate
 44 I Renold Transmission Chain Catalogue

Double Pitch K1/K2 Attachments

Section 1

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold BS K1 Attachments
A A E F w h d g T U
113083* 208B 1.00 25.40 1.51 1.51 23.8 8.5 4.3 5.8 27.6 42.5
113103* 210B 1.25 31.75 1.51 1.51 25.4 10.5 5.3 7.4 31.6 48.5
113123* 212B 1.50 38.10 1.76 1.76 20.0 12.2 6.4 8.2 35.2 54.8
113168 216B 2.00 50.80 3.70 3.00 40.0 17.0 8.4 10.3 58.0 83.8
113203 220B 2.50 63.50 4.40 4.10 40.0 21.0 10.5 11.3 69.0 98.7
113243 224B 3.00 76.20 5.40 5.00 70.0 28.0 10.5 16.7 88.0 124.7

* Straight plate

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold BS K2 Attachments
A A E F h d g w s T U
113083* 208B 1.00 25.40 1.51 1.51 8.5 4.3 5.8 37.1 12.7 27.6 42.5
113103* 210B 1.25 31.75 1.51 1.51 10.5 5.3 7.4 46.7 15.8 31.6 48.5
113123* 212B 1.50 38.10 1.76 1.76 12.2 6.4 8.2 54.4 19.0 35.2 54.8
113168 216B 2.00 50.80 3.70 3.00 17.0 8.4 10.3 71.3 25.4 58.0 83.8
113203 220B 2.50 63.50 4.40 4.10 21.0 10.5 11.3 86.5 31.7 69.0 98.7

* Straight plate
 Renold Transmission Chain Catalogue I 45

Double Pitch M1/M2 Attachments

Section 1
Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold BS M1 Attachments
A A E F w e f d g
113083* 208B 1.00 25.40 1.51 1.51 23.8 20.8 13.7 4.3 5.8
113103* 210B 1.25 31.85 1.51 1.51 25.4 24.9 16.5 5.3 7.4
113123* 212B 1.50 38.10 1.73 1.73 20.0 28.3 18.5 6.4 8.2
113168 216B 2.00 50.80 3.70 3.00 40.0 40.0 27.4 8.4 10.3
113203 220B 2.50 63.50 4.40 4.10 40.0 48.7 33.0 10.5 11.3
113243 224B 3.00 76.20 5.40 5.00 70.0 61.5 42.7 10.5 16.7

* Straight plate

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

Renold BS M2 Attachments
A A E F e f d g w s
113083* 208B 1.00 25.40 1.51 1.51 20.8 13.7 4.3 5.8 37.1 12.7
113103* 210B 1.25 31.75 1.51 1.51 24.9 16.5 5.3 7.4 46.7 15.8
113123* 212B 1.50 38.10 1.76 1.76 28.3 18.5 6.4 8.2 54.4 19.0
113168 216B 2.00 50.80 3.70 3.00 40.0 27.4 8.4 10.3 71.3 25.4
113203 220B 2.50 63.50 4.40 4.10 48.7 33.0 10.5 11.3 86.5 31.7
113243 224B 3.00 76.20 5.40 5.00 61.5 42.7 10.5 16.7 - 38.1

* Straight plate
 46 I Renold Transmission Chain Catalogue

Extended Bearing Pins

European (BS) Standard / ISO 606
Section 1

Extended pin + circlip groove (type C) Unit assemblies

to suit standard external circlips to BS3673 Part 2

No 163 No 165
Outer link Connecting link - spring clip

No 164 No 166
Outer link Connecting link - spring clip

Chain Ref. Technical Details (mm)

Extended pins with circlip groove
Renold ISO Pitch Pitch Pin Extension Circlip Circlip Chain track
Chain Ref. (inch) (mm) Diam. Length to Groove Groove from chain (clip not supplied unless
No. Circlip Groove Width Diam. Centre line
specifically requested)

MAX MAX MIN MIN MAX

Type C
A A b j k m f
08B1 08B-1 0.500 12.700 4.45 7.19 0.58 3.18 17.78
10B1 10B-1 0.625 15.875 5.08 9.45 0.71 3.73 21.34
12B1 12B-1 0.750 19.050 5.72 11.81 0.71 4.78 25.15
16B1 16B-1 1.000 25.400 8.28 15.75 1.02 6.93 36.58

Extended pin (type D) Unit assemblies

No 563 No 565
Outer link Connecting link - spring clip

No 564 No 566
Outer link Connecting link - spring clip

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch Pin Extension Pin Straight extended pin
Chain Ref. (inch) (mm) Diam. Length Length
No.
±0.01 ±0.25
MAX

Type D - ISO 606

A A b v h
06B1* 06B-1 0.375 9.525 3.28 11.3 23.8
08B1 08B-1 0.500 12.700 4.45 14.8 31.0
10B1 10B-1 0.625 15.875 5.08 17.6 36.2
12B1 12B-1 0.750 19.050 5.72 20.7 42.4
16B1 16B-1 1.000 25.400 8.28 33.3 68.0
20B1 20B-1 1.250 31.750 10.19 38.3 79.7
24B1 24B-1 1.500 38.100 14.63 50.3 101.8

* Straight side plate

 Renold Transmission Chain Catalogue I 47

Attachment Chain Connecting Links

European (BS) Standard / ISO 606

Section 1
No240 No 272 No 140 No 172 No144 No 175

No242 No 276 No 142 No 176 No145 No 180

No270 No 278 No 170 No 178 No 174 No 181

No 163 No 165 No 563 No 565

Outerlink Connecting link- spring clip

No 164 No 166 No 564 No 566

Outerlink Connecting link- spring clip

Special or adapted roller chain

In addition to our ranges of standard series
chain we can also offer:
• Roller Chain up to 300mm pitch
and 450 tonnes breaking load
• Standard Series Chain adapted to your
unique needs with special attachments
• Special Chain designed with integral
attachments to meet individual requirements
Renold adapted chain can be in the form of
special plates, pin rollers, or blocks which can
be designed, manufactured and assembled into
chain of all pitch sizes.
Attachments can be made from normal
materials, stainless steel or plastics.
We will be pleased to receive details of your
requirements and evaluate them for strength,
durability, price and despatch. They can be
manufactured from your own designs or
adapted from existing drawings.
The illustrations show only a small selection
of the wide range of variants and these chains
have been used successfully in many branches
of industry for the feeding, conveying and
discharge of a variety of products.
 48 I Renold Transmission Chain Catalogue

Standard Attachments
ANSI standard
Section 1

Renold standard power transmission chain can Note: 1. K2 attachments cannot be Bearing pins with an extension on one side of
be adapted for conveying duties by the fitment assembled on adjacent inner and the chain can be built into chain at any desired
of attachments shown on these pages. The outer links on the same side of pitch spacing and afford a simple means by
attachments can be assembled on one or both the chain. which attachments or tubular staybars may
sides of the chain at any desired pitch spacing. be secured to chain.
2. M1 attachments cannot be
assembled next to a No. 30
(Cranked link double) joint.

No.4 No.26
Inner link Connecting link-spring clip
(for chains up to .75” pitch)

No.58
No.107
Connecting link-press fit
Riveting pin link
(for chains of 1” pitch)

Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch Inside Roller Plate Plate Plate Pin Pin Conn. Link ISO606 Weight
Chain Ref. (inch) (mm) Width Diam. Height Width Width Diam. Length Extension Tensile
No. Inner Outer Strength
(Newtons) kg/m
MIN MAX MAX MAX MAX MAX MAX MAX MIN

ANSI Standard - Simplex

A A B C D E F G H1 J K
35A1◊ 35 0.375 9.525 4.68 5.080◊◊ 8.66 1.30 1.30 3.59 15.5 3.3 7900 0.33
40A1 40 0.500 12.700 7.85 7.920 11.15 1.55 1.55 3.98 17.8 3.9 13900 0.63
50A1 50 0.625 15.875 9.40 10.160 14.55 2.03 2.03 5.07 21.8 4.1 21800 1.05
60A1 60 0.750 19.050 12.58 11.910 17.45 2.39 2.39 5.96 26.9 4.6 31300 1.55
80A1 80 1.000 25.400 15.75 15.880 24.05 3.25 3.25 7.93 33.5 5.4 55600 2.80

◊ Bush chain ◊◊ Bush diameter.

 Renold Transmission Chain Catalogue I 49

K1 Attachments
ANSI B29.100 / ISO 606

Section 1
Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ANSI Standard
A A E F w h d g T U
40A1 40 0.500 12.700 1.52 1.52 9.50 7.900 3.20 6.01 25.3 35.30
50A1 50 0.625 15.875 2.03 2.03 12.70 10.300 5.20 7.54 31.8 46.02
60A1 60 0.750 19.050 2.39 2.39 15.90 12.140 5.20 9.04 38.1 54.23
80A1 80 1.000 25.400 3.15 3.15 19.05 15.875 6.73 11.43 50.8 70.08

Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ANSI Standard
A A E F w h d g T U
40A1 40 0.500 12.700 1.51 1.51 9.5 7.9 3.3 5.5 25.4 35.8
50A1 50 0.625 15.875 2.00 2.00 12.7 10.3 5.3 7.2 31.8 49.8
60A1 60 0.750 19.050 2.40 2.40 15.9 11.9 5.3 8.6 38.2 58.0
80A1 80 1.000 25.400 3.00 3.00 24.0 15.9 6.6 12.1 50.8 82.6
 50 I Renold Transmission Chain Catalogue

K2 Attachments
ANSI B29.100 / ISO 606
Section 1

Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ISO/ANSI Standard
A A E F h d g w s T U
40A1 40 0.500 12.700 1.51 1.51 7.9 3.3 5.5 24.0 12.7 25.4 35.8
50A1 50 0.625 15.875 2.00 2.00 10.3 5.3 7.2 29.9 15.8 31.8 49.8
60A1 60 0.750 19.050 2.40 2.40 11.9 5.3 8.6 35.6 19.0 38.2 58.0
80A1 80 1.000 25.400 3.00 3.00 15.9 6.6 12.1 46.2 25.4 50.8 82.6

K1 attachment M1 attachment

K2 attachment M2 attachment
 Renold Transmission Chain Catalogue I 51

M1 Attachments
ANSI B29.100 / ISO 606

Section 1
Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ANSI Standard
A A E F w e f d g
40A1 40 0.500 12.700 1.52 1.52 9.50 17.40 12.42 3.20 6.01
50A1 50 0.625 15.875 2.03 2.03 12.70 22.73 15.70 5.20 7.54
60A1 60 0.750 19.050 2.39 2.39 15.90 26.36 18.19 5.20 9.04
80A1 80 1.000 25.400 3.15 3.15 19.05 34.29 24.59 6.73 11.43

Chain Ref. Technical Details (mm)

Renold ISO Pitch Pitch

Chain Ref. (inch) (mm)
No.

ISO/ANSI Standard
A A E F w e f d g
40A1 40 0.500 12.700 1.51 1.51 9.5 17.5 12.7 3.3 5.5
50A1 50 0.625 15.875 2.00 2.00 12.7 24.6 15.9 5.3 7.2
60A1 60 0.750 19.050 2.40 2.40 15.9 27.4 18.3 5.3 8.6
80A1 80 1.000 25.400 3.00 3.00 24.0 39.7 24.6 6.6 12.1
 52 I Renold Transmission Chain Catalogue

M2 Attachments
ANSI B29.100 / ISO 606
Section 1

Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ISO/ANSI Standard
A A E F e f d g w s
40A1 40 0.500 12.700 1.51 1.51 17.5 12.7 3.3 5.5 24.0 12.7
50A1 50 0.625 15.875 2.00 2.00 24.6 15.9 5.3 7.2 29.9 15.8
60A1 60 0.750 19.050 2.40 2.40 27.4 18.3 5.3 8.6 35.6 19.0
80A1 80 1.000 25.400 3.00 3.00 39.7 24.6 6.6 12.1 46.2 25.4

Extended Bearing Pins

ANSI B29.100 / ISO 606

Extended pin (type D) Unit assemblies

No 463 No 465 No 467

Outer link Connecting link-spring clip

No 464 No 466 No 468

Outer link Connecting link-spring clip

Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch Pin Extension Chain track Extended pin
Chain Ref. (inch) (mm) Diam. Length from chain
No. Centre line
±0.01 ±0.25
MAX

ANSI Standard
A A b v h
35A1◊ 35 0.375 9.525 3.58 9.53 15.5
40A1 40 0.500 12.700 3.96 9.73 18.0
50A1 50 0.625 15.875 5.08 11.89 22.4
60A1 60 0.750 19.050 5.94 14.27 27.2
80A1 80 1.000 25.400 7.92 19.05 35.7
◊ Bush chain
 Renold Transmission Chain Catalogue I 53

Double Pitch K1/M2 Attachments

ANSI B29.100 / ISO 606

Section 1
Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ANSI Standard K1
A A E F w h d g T U
113040 2040 1.00 25.40 1.51 1.51 23.8 9.1 3.3 5.7 25.4 40.6
113050 2050 1.25 31.75 2.00 2.00 25.4 11.1 5.3 7.4 31.8 48.9
113060 2060 1.50 38.10 2.40 2.40 28.6 14.7 5.3 8.8 42.8 58.0
113560* C2060 1.50 38.10 3.17 3.17 28.6 14.7 5.3 8.8 42.8 61.6

Chain Ref. Technical Details (mm)

Renold ANSI Pitch Pitch

Chain Ref. (inch) (mm)
No.

ANSI Standard M1
A A E F w e f d g
113040 2040 1.00 25.40 1.51 1.51 23.8 20.9 11.1 3.3 5.7
113050 2050 1.75 31.75 2.00 2.00 25.4 24.9 14.3 5.3 7.4
113060 2060 1.50 38.10 2.40 2.40 28.6 30.2 19.0 5.3 8.8
113560* C2060 1.50 38.10 3.17 3.17 28.6 30.2 19.0 5.3 8.8

* Straight Plate
 54 I Renold Transmission Chain Catalogue

Attachment Chain Connecting Links

ANSI standard
Section 1

No240 No272 No140 No172 No144 No175

No242 No276 No142 No176 No145 No180

No270 No278 No170 No178 No174 No181

No163* No167* No463 No465

No164* No168* No464 No466 * Ansi 80

Special or Adapted Roller Chain

In addition to our ranges of standard series
chain we can also offer:
• Roller Chain up to 300mm pitch and
450 tonnes breaking load
• Standard Series Chain adapted to your
unique needs with special attachments
• Special Chain designed with integral
attachments to meet individual requirements
Renold adapted chain can be in the form of
special plates, pin rollers, or blocks which can
be designed, manufactured and assembled into
chain of all pitch sizes.
Attachments can be made from normal
materials, stainless steel or plastics.
We will be pleased to receive details of your
requirements and evaluate them for strength,
durability, price and despatch. They can be
manufactured from your own designs or
adapted from existing drawings.
The illustrations show only a small selection of
the wide range of variants and these chains
have been used successfully in many branches
of industry for the feeding, conveying and
discharge of a variety of products.