Mechanical
Pressure Measurement
Low Pressure Gauge
Type 612.20, Stainless Steel Case
WIKA Datasheet 612.20
Applications
Low pressure pneumatic systems
Suitable for fluid medium, gaseous or dry that does not
corrode copper alloy.
Product features
Low pressure series
Copper alloy wetted parts & stainless steel case
Capsule pressure gauge
Specifications Pressure Gauge 612.20
Design Case
EN 837-3 304 stainless steel with stainless steel bayonet ring
Size Weather Protection
2½”, 4” & 6” (63 mm, 100 mm & 160 mm) Weather resistant (NEMA 3 / IP 54)
Accuracy class
Standard Scales
± 1.5% of span
in. H2O/mm H2O
Ranges (All ranges not stocked) oz.-sq. in./mm H2O
Size 2½” (63 mm): 0... 10” H2O (25 mbar) to 0 ... 250” H2O (600 mbar) oz.-sq. in./in. H2O
Size 4” (100 mm): 0 ... 4” H2O (10 mbar) to 0 ... 250” H2O (600 mbar) PSI
Size 6” (160 mm): 0 ... 2.5” H2O (4 mbar) to 0 ... 250” H2O (600 mbar)
or all other equivalent vacuum or compound ranges Window Gasket
Buna-N
Connection
Window
Copper alloy
Flat window glass
Size 2½” (63 mm): ¼” NPT lower mount (LM) or center back mount (CBM)
Size 4” & 6” (100 mm & 160 mm): ¼” NPT or ½” NPT lower mount (LM) or Working Range
lower back mount (LBM) Steady: Full scale value
Fluctuating: 0.9 x full scale value
Capsule Element
Material: copper alloy Operating Temperature
Movement Ambient: -4°F to 140°F (-20°C to 60°C)
Copper alloy, nickel-silver pinion gear and shaft. Media: max. 212°F (+100°C)
Zero adjustment screw on dial max. 176°F (+80°C) for 4” & 6” LBM
Dial Temperature error
White aluminum with black lettering Additional error when temperature changes from
reference temperature of 68°F (20°C) +0.6% of span for
Pointer every 18°F (10°K) rising or falling.
Black aluminum (zero adjust on dial. Must remove
window to access)
WIKA Datasheet 612.20 · 06/2015 Page 1 of 2
R
Optional Extras
Front stainless steel polished Cleaned for oxygen service
Brass threaded restrictor Medical specification
U-Clamp bracket steel zinc plated wiht stainless steel Special connections limited to wrench flat area
polished profile ring (4” & 6”) Nickel plated connection
Safety glass window Externally adjustable red mark pointer (set pointer)
Overpressure and underpressure protection: Externally adjustable red drag pointer (max. pointer)
< 10” H2O (25 mbar): 3x of full scale Custom dial layout
> 10” H2O (25 mbar): 10x of full scale Other pressure scales available
Dimensions
Standard versions
A C A C1
W(sq)
T(NPT)
W(sq)
T(NPT)
Lower Back Mount
Lower Mount
M C1 M
N N C
A A
W(sq)
T(NPT)
J(dia.) J(dia.)
W(sq)
3 holes equally G 3 holes equally T(NPT)
spaced as shown Left Front Flange spaced as shown
LM/Rear Flange
A* NOMINAL SIZE
TYPE/SIZE WEIGHT KEY A B C C1 D E G H J L M N T W
612.20 1.32 lbs mm 101 85 49.3 49.3 104 15.5 78 30 4.8 3 132 116 1/2“ or 1/4“ 22
4“ in 4 3.35 1.94 1.94 4.09 0.61 3.07 1.18 0.19 0.12 5.2 4.57 1/2“ or 1/4“ 0.86
Note: For 1/4” NPT connections, B dimension changes to 80mm / 3.15 in.
Recommended panel cut-out: D + 1mm
Ordering information
State computer part number (if available) /type number/size/range/connection size and locations/options required. WIKA reserves the right to make changes without prior notice.
Page 2 of 2 WIKA Datasheet 612.20 · 06/2015
WIKA Instrument Corporation
1000 Wiegand Boulevard
Lawrenceville, GA 30043
1-888-WIKA-USA /770-513-8200 (in GA)
Fax 770-338-5118
[email protected] www.wika.com
