Scribd
Upload
84 views1 page

DH 40

This document provides information about DH40 shipbuilding steel plates from Bebon International, including: 1) DH40 steel plates are used for shipbuilding and oil platforms, with thicknesses from 4mm to 260mm and widths from 1200mm to 4000mm. 2) The chemical composition and mechanical properties of DH40 steel plates are specified. 3) DH40 steel plates can be delivered in various conditions depending on thickness, such as normalized, controlled rolled, and temperature-deformation controlled rolling.

Uploaded by

saswatt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views1 page

DH 40

This document provides information about DH40 shipbuilding steel plates from Bebon International, including: 1) DH40 steel plates are used for shipbuilding and oil platforms, with thicknesses from 4mm to 260mm and widths from 1200mm to 4000mm. 2) The chemical composition and mechanical properties of DH40 steel plates are specified. 3) DH40 steel plates can be delivered in various conditions depending on thickness, such as normalized, controlled rolled, and temperature-deformation controlled rolling.

Uploaded by

saswatt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

7/19/2018 DH40 steel plates|DH40 Shipbuilding steel plate|DH40 steel suppliers ­ BEBON INTERNATIONAL

Home About us Products News E­stocks Service Contact us

Products Home ­ products ­ DH40 shipbuilding steel plate

steel plate for shipbuilding & 
oil platform

Flat­Bulb Steel for shipbuilding

Flat bar Steel for shipbuilding

angle steel for shipbuilding
DH40 Shipbuilding steel plate
ASTM A131 DH40 steel plate is a kind of steel for shipbuilding and platform.Shipbuilding steel plate DH40 is the high tensile
strength steel. As a professional shipbuilding steel plate exporter, Bebon international can supply steel plate DH40. ASTM A
131 DH40 shipbuilding steel plates can be used in the manufacture of the ship's hull structure whose weight is below 10000
: 0086­371­86151827 tons.

: 0086­371­86011881
DH40 Shipbuilding Steel Specification:
: [email protected] Thickness: 4 mm to 260mm, 
Width: 1200mm to 4000mm
: [email protected]
Length: 3000mm to 18000mm.
: bebonchina
DH40 steel plate Chemical Composition %

Cr Ni Mo
C max Si max Mn P max S max Als min Ti max Cu max Nb V
Grade max max max

0.90­ 0.02­ 0.05­


DH40 0.18 0.50 0.035 0.035 0.015 0.02 0.35 0.20 0.40 0.08
1.60 0.05 0.10

Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.40% (thickness ≤
50mm). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

DH40 steel plate Mechanical Property

Rm Re(MPa) A%
Akv/J min
Grade (MPa) min min

E.T °C Thickness (mm)

≤ 50 >50­70 >70­100


DH40 510­660 390 20

0 L C L C L C

41 27 ­

Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C:
crosswise.

DH40 steel plate Condition Of Delivery

The thickness of steel
Fine grains
category
Grade elements
≤ 12 >12.5­20 >20­25 >25­35 >35­50 >50­100

Plate/
sheet
DH40 any N(50),CR(50),TM(50) ­

Profile steel

Note: 1. DH40 Shipbuilding steel delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC,
Temperature ­ deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be
control rolled with the agreement of Classification Society .
2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(­) means without impact test.

Contact:

Tell: 0086­371­86151827, 0086­371­86011881

E­mail:[email protected]

http://www.shipbuilding­steel.com/Products/DH40.html 1/2

You might also like