C o m e t Weatherproof Type Double Compression Cable Gland Page 1 of 2
Nie Weatherproof Type Double Compression Cable Gland
Indoor Or Outdoor Gland For Single Wire Armoured Cables
Gland Cable dimensions Gland dimensions
reference
Diameter Armour Entry thread Across Across
wire flats corners
Under Overall diameter Entry Length
armour Diameter
(A) (B) (C) (D) (E) (F)
size mm mm mm inch mm mm mm
CBW01SS 8.0 12.0 0.8/1.4 3/4" 15.0 21.0 23.5
CBW01S 10.0 16.5 0.8/1.4 3/4" 15.0 25.0 29.0
CBW01 12.0 18.0 0.8/1.4 3/4" 15.0 28.0 32.0
CBW01A 12.0 18.0 0.8/1.4 1" 15.0 28.0 32.0
CBW02 14.0 20.0 0.8/1.4 1" 15.0 31.5 36.5
CBW02A 14.0 20.0 0.8/1.4 3/4" 15.0 31.5 36.5
CBW03 17.0 23.0 0.8/1.4 " 15.0 32.0 37.0
CBW04 20.0 26.0 0.8/1.4 1" 15.0 38.0 44.0 Application
CBW04A 20.0 26.0 0.8/1.4 11/4" 15.0 38.0 44.0 For use under most
climatic conditions.This
CBW05 24.0 30.0 0.8/1.4 11/4" 15.0 41.0 47.0
are Weatherproof as per
CBW05A 24.0 30.0 0.8/1.4 11/2" 15.0 41.0 47.0
IP66-IS 13947 part I and
CBW06 27.0 33.0 0.8/1.4 11/2" 15.0 47.0 54.0 may be used in the
CBW06A 27.0 33.0 0.8/1.4 11/4" 15.0 47.0 54.0 corrosive conditions when
protected by the shroud.
CBW07 30.0 37.0 0.8/1.4 11/2" 15.0 52.0 58.0
CBW08 35.0 41.0 0.8/1.4 2" 15.0 56.0 64.0
Specification
CBW09 40.0 46.0 0.8/1.4 2" 15.0 59.0 67.0
Gland consist of checknut
CBW010 46.0 52.0 0.8/1.4 2" 20.0 67.5 77.0 1, gland body 2,
CBW010A 46.0 52.0 0.8/1.4 21/2" 20.0 67.5 77.0 neoprene inner ring 3,
CBW011 54.0 60.0 0.8/1.4 21/2" 20.0 80.0 92.0 armour clamping cone 4,
armour clamping ring 5,
CBW012 60.0 67.0 0.8/1.4 3" 20.0 85.0 98.0
amour clamping nut
CBW013A 66.0 72.0 0.8/1.4 3" 20.0 90.0 99.0 6,neoprene outer ring 7,
CBW013 72.0 78.0 0.8/1.4 31/4" 20.0 99.0 113.0 skid washer 8, outer seal
CBW014 78.0 84.0 0.8/1.4 31/2" 20.0 108.0 122.0 nut 9. All metal parts are
made of brass accurately
CBW015 88.0 94.0 0.8/1.4 4" 20.0 117.0 131.0
machined for ease of
CBW016 98.0 105.0 0.8/1.4 41/2" 20.0 130.0 145.0 assembly.
Extras
Shrouds and Earth tags
are supplied separately
and should be specified
when ordering the gland.
Fitting Sequence:
a) Screw item 2 into apparatus (secure with item 1 if plain hole entry.)
mhtml:file://C:\Documents and Settings\Administrator\Desktop\C o m e t Weatherproof Ty... 3/5/2010
C o m e t Weatherproof Type Double Compression Cable Gland Page 2 of 2
b) Pass item 9,8,7,6 respectively over cable before commencing to strip oversheath.
c) Remove oversheath and pass item 5 over exposed armour.
d) Cut armour to length, lift wire ends, pass item 4 over exposed bedding and beneath armour.
e) Pass item 3 over exposed bedding.
f) Pass cable end through item 2.
g) Engage item 6 and 2 and tighten up.
Nie Single Compression Type Heavy Duty Cable Gland
Nie Weatherproof Type Double Compression Cable Gland
Nie Flameproof Type Double Compression Cable Gland
Nie BW Gland
Nie CW Gland with Outer Seal
cablegland / home
UP
mhtml:file://C:\Documents and Settings\Administrator\Desktop\C o m e t Weatherproof Ty... 3/5/2010
