Scribd
Upload
25 views1 page

Page 18

The document describes the ECO-DOMO TI tab connector system for terminating cables using insulation displacement connection (IDC) technology. It has versions with and without locking features and allows cable exits at 90, 180, or 270 degrees. It supports single or twin terminations for wires ranging from 0.5-0.75 mm2 and operates from -40 to 110 degrees Celsius. Key electrical specifications include a 10A current rating and passing the DIN EN 61984 insulation standard.

Uploaded by

Autor Autor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views1 page

Page 18

The document describes the ECO-DOMO TI tab connector system for terminating cables using insulation displacement connection (IDC) technology. It has versions with and without locking features and allows cable exits at 90, 180, or 270 degrees. It supports single or twin terminations for wires ranging from 0.5-0.75 mm2 and operates from -40 to 110 degrees Celsius. Key electrical specifications include a 10A current rating and passing the DIN EN 61984 insulation standard.

Uploaded by

Autor Autor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ECO-DOMO TI

Pitch 5 mm

Description of system

 Tab connector for IDC termination as flying lead coupling or for panel mounting application
 Versions with / without locking features
 Cable exits 90°, 180° (optional 270°)
 Single and / or twin terminations depending on wire size
 Codings in accordance with the RAST 5 standard specifications
 Label optional

MS 9460

Technical data

Mechanical Pitch 5 mm
Positions 2 - 10
Termination IDC
Wire size 0.5 - 0.75 mm2 / 0.5 + 0.5 mm²
Insulation diameter 2.3 mm
Type of wire stranded wire
Temperature range - 40 °C ...+ 110 °C

Electrical Rated current 10 A


Rated voltage 250 V
Dielectrical strength 2.5 kV
Tracking resistance CTI 400
Air gap and creeping distance 4 mm
Insulation resistance > 109
Contact resistance < 10 m
Approved by DIN EN 61984 (IEC 61984)

Materials Contact tabs 6.3 x 0.8 mm


Contact material CuSn
Contact finishing Sn
Housings PA, glow wire resistant,
GWT 750 °C acc. to IEC 60335-1
Colour of housing natural

16

You might also like