Scribd
Upload
48 views1 page

DTC P0121/41 Throttle/Pedal Position Sensor/Switch "A" Circuit Range/Performance Problem

This document provides information about diagnostic trouble code P0121/41 related to the throttle/pedal position sensor or switch circuit having a range or performance issue. It detects this issue when the vehicle speed drops from over 30 km/h to 0 km/h and the throttle position sensor output is outside the applicable range. The inspection procedure recommends replacing the throttle body based on freeze frame data from the engine control unit.

Uploaded by

Miguel ruiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

DTC P0121/41 Throttle/Pedal Position Sensor/Switch "A" Circuit Range/Performance Problem

This document provides information about diagnostic trouble code P0121/41 related to the throttle/pedal position sensor or switch circuit having a range or performance issue. It detects this issue when the vehicle speed drops from over 30 km/h to 0 km/h and the throttle position sensor output is outside the applicable range. The inspection procedure recommends replacing the throttle body based on freeze frame data from the engine control unit.

Uploaded by

Miguel ruiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DI−52

DIAGNOSTICS − ENGINE
DI1LI−05

DTC P0121/41 Throttle/Pedal Position Sensor/Switch ”A”


Circuit Range/Performance Problem

CIRCUIT DESCRIPTION
Refer to DTC P0120/41 (Throttle/Pedal Position Sensor/Switch ”A” CIrcuit Malfunction) on page DI−46.
DTC No. DTC Detecting Condition Trouble Area
While vehicle speed drops from 30 km/h (19 mph) or more to 0
S Throttle position sensor
P0121/41 km/h (0 mph), output value of throttle position sensor is out of
S Engine ECU
applicable range. (2 trip detection logic)

INSPECTION PROCEDURE
HINT:
Read freeze frame data using hand−held tester. Because freeze frame records the engine conditions when
the malfunction is detected, when troubleshooting it is useful for determining whether the vehicle was run-
ning or stopped, the engine warmed up or not, the air−fuel ratio lean or rich, etc. at the time of the malfunction.

Replace throttle body (See page FI−31).

1ZZ−FE, 2ZZ−GE ENGINE (RM733E)

You might also like