Control Ball Valve
Description
Winner control ball valve consists of WAV4-… series rotary
actuator and WCBS… series ball valve. Equal percentage flow
characteristic guarantees the valve performances of stability. Control
ball valves are widely used in HVAC system, heating system, water
treatment equipment, and water running control in industrial
automation, such as: AHU, flesh air-handling unit, differential pressure control unit and heat ex-changer for flow
regulation and on/off control.
Application
HVAC system, Heating system, Water treatment system, Industrial equipment
Operational mode
Winner control ball valve is motor-operated by a type of WVA4-1…, WAV4-2…, and WAV4-3… actuator. The
actuator is controlled by a modulating on/off , 3-point or proportional control system and move the ball of the valve,
to the opening position dictated by the control signal.
Technical data
Valve body:
Medium: cold/hot water, with 50% glycol Temperature of medium: 2°C...90°C
Rated pressure: PN20 Pipe connector: internal thread
Ambient temp. range: −5…+60°C；0…90%RH Size: 1/2’’ -2’’
Valve type: 2-way and 3-way Flow characteristic: equal percentage, on/off
Material
Valve body: forged brass, Hpb59-1 Seal: ball: EPDM+PTFE
Ball: chrome-plated brass stem: EPDM
Valve connector: PC Valve spindle: aluminum alloy
Model No. DN(mm) Inch Kvs(m3/h)
△ Pmax △ Ps
(MPa) (KPa)
WCBS215 DN15 1/2” 6.3 0.6Mpa 1400
WCBS220 DN20 3/4’’ 6.3 0.6Mpa 1400
WCBS225 DN25 1” 10 0.6Mpa 1400
2-way
WCBS232 DN32 11/4” 16 0.6Mpa 1400
WCBS240 DN40 11/2” 25 0.6Mpa 1400
WCBS250 DN50 2” 43 0.6Mpa 1400
WCBS315 DN15 1/2” 6.3 0.6Mpa 1400
WCBS320 DN20 3/4’’ 6.3 0.6Mpa 1400
WCBS325 DN25 1” 10 0.6Mpa 1400
3-way
WCBS332 DN32 11/4” 16 0.6Mpa 1400
WCBS340 DN40 11/2” 25 0.6Mpa 1400
WCBS350 DN50 2” 43 0.6Mpa 1400
Actuator
WVA4-1… ±
230 VAC 15%, on/off or 3-point
WVA4-2… 24VAC/DC±15%, on/ off or 3-point
WVA4-3… 24VAC/DC±15%, proportional (0(2)-10VDC/0(4)-20Ma)
TPS THERMAL CONTROLS LTD UNIT A9 ARDS BUISNESS CENTRE , NEWTOWNARDS CO DOWN BT23 4YH
TEL +44(0)2891820799 [email protected] www.tpsthermalcontrols.com
Output torque: 3 type, 4N.m, 6N.m and 10N.m Angle of rotation: 90°
Manual handle Automatic overload protection system
Manual selection of ball rotation direction: C.W. /C.C.W, factory setting is C.W.
Protect rank: IP54 Operation time: 50S-120S
Function （3-point, on/off or proportional type）
The actuator is controlled by a modulating on/off, 3-point, and proportional control signal, using high transmitting
ratio gear drive to fix and lock.
WVA4-1… ±
230 VAC 15%, on/off or 3-point
Brown wire is power on counterclockwise rotation, valve open
Red wire is power on clockwise rotation, valve close
Brown or red wire is power off Valve keep the current position
WVA4-2… 24VAC/DC ±15%, on/ off or 3-point
Brown wire is power on counterclockwise rotation, valve open
Red wire is power on clockwise rotation, valve close
Brown or red wire is power off Valve keep the current position
WVA4-3… 24VAC/DC ±15%, proportional (0(2)-10VDC/0(4)-20Ma)
Black wire and brown wire are the power wire.
Yellow wire accept 0-10V control signal to control the valve’s open angle
WVA4-3… Flow characteristic
Input 0-10VDC control signal
Flow characteristic: equal percentage
Flow range: 0%-100%
Output
Model No. Working Voltage Actuator type Consumption Valve body
torque
WVA4-104 4N.m 12VA DN25,DN20,DN15
WVA4-106 230VAC±15% On/off or 3-point 6N.m
6VA
DN50 ，DN40,DN32,
WVA4-110 10N.m DN50
WVA4-204 4N.m 3VA DN25,DN20,DN15
WVA4-206 24VAC/DC±15% On/off or 3-point 6N.m
6VA
DN50 ，DN40,DN32,
WVA4-210 10N.m DN50
WVA4-304 0(2)-10VDC 4N.m 3VA DN25,DN20,DN15
WVA4-306 24VAC/DC±15% (0(2)-10VDC/0(4)-20Ma) 6N.m
6VA
DN50 ，DN40,DN32,
WVA4-310 (0(2)-10VDC/0(4)-20Ma) 10N.m DN50
Connector
Model No Commodity Application Actuator Valve body Spindle
Be used to WVA4-104 ， WVA4-204 ， ，
WCBS225
WCBS325，
WCBS-1 WCBS-3
connect WVA4-304
Connector
the WVA4-106 ， WVA4-206 ， WCBS232，WCBS240，
WCBS-2 actuator WVA4-306， WCBS250， WCBS-4
and the WVA4-110 ， WVA4-210 ， WCBS332, WCBS340，
TPS THERMAL CONTROLS LTD UNIT A9 ARDS BUISNESS CENTRE , NEWTOWNARDS CO DOWN BT23 4YH
TEL +44(0)2891820799 [email protected] www.tpsthermalcontrols.com
valve body WVA4-310 ， WCBS350 ，
Installation:
1. Ensure that the valve body is in the full open status.
2. Ensure that the actuator is in the fully open position as the follow picture:
3. Aligning the valve stem, press down the aluminum alloy spindle.
Change of running direction
The rotation can be reversed by pushing the CCW/CW switch on the casing.
CW CCW
Factory settings: "CW"
Dimension and Wiring
Actuator
WVA4-104, WVA4-204, WVA4-304 WVA4-106, WVA4-206, WVA4-306
WVA4-110, WVA4-210, WVA4-310
Connector Dimension
TPS THERMAL CONTROLS LTD UNIT A9 ARDS BUISNESS CENTRE , NEWTOWNARDS CO DOWN BT23 4YH
TEL +44(0)2891820799 [email protected] www.tpsthermalcontrols.com
85.00 85.00
29.50
0
5
.
00 9
2 00
.0
0.7 7
13.00
14.00
24.00 31.00
WCBS-1 WCBS-2
Wiring diagram
WVA4-104，WVA4-106，WVA4-110 WVA4-304 ，WVA4-306，WVA4-310
WVA4-204，WVA4-206，WVA4-210
Feedback resistances Feedback Micro travel switch
10K
BLU
Y EL
G RN
GR N
ORG
YEL
P1 P2 P3 S1 S2 S3
WVA4-1…-R, WVA4-2…-R WVA4-1…-K, WVA4-2…-K
Model definition
Valves body model Actuator model
TPS THERMAL CONTROLS LTD UNIT A9 ARDS BUISNESS CENTRE , NEWTOWNARDS CO DOWN BT23 4YH
TEL +44(0)2891820799 [email protected] www.tpsthermalcontrols.com
WCBS215
DN(mm)
2- 2 way
3-3 way
WC BS-valve body code
Actuator torque code will not be showed if delivered.
TPS THERMAL CONTROLS LTD UNIT A9 ARDS BUISNESS CENTRE , NEWTOWNARDS CO DOWN BT23 4YH
TEL +44(0)2891820799 [email protected] www.tpsthermalcontrols.com
