Scribd
Upload
128 views6 pages

Ventosa Fipa HNBR

This document provides information on bellows vacuum cups made of HNBR rubber for removing hot plastic parts from injection moulding machines. It describes the SKH-B1 and SKH-B2 series bellows vacuum cups with 1.5 and 2.5 bellows respectively, as well as oval vacuum cups in the SKH-O series. Technical data is provided for each model including dimensions, material, temperature range and compatible fittings. The bellows cups are suitable for uneven surfaces and hot parts up to 320°F, while the oval cups provide increased suction force for smooth surfaces.

Uploaded by

HIDRAFLUID
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
128 views6 pages

Ventosa Fipa HNBR

This document provides information on bellows vacuum cups made of HNBR rubber for removing hot plastic parts from injection moulding machines. It describes the SKH-B1 and SKH-B2 series bellows vacuum cups with 1.5 and 2.5 bellows respectively, as well as oval vacuum cups in the SKH-O series. Technical data is provided for each model including dimensions, material, temperature range and compatible fittings. The bellows cups are suitable for uneven surfaces and hot parts up to 320°F, while the oval cups provide increased suction force for smooth surfaces.

Uploaded by

HIDRAFLUID
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Industries | Plastics

Bellows vacuum cups, 1.5 bellows made of HNBR – Series SKH-B1

Bellows vacuum cups, 1.5 bellows made of HNBR – Series SKH-B1

MINIMUM MARKING / UP
TO 320°F

Product Description Advantage


Bellows vacuum cups for uneven surfaces with suitability for removing hot plastic > Free of silicone and other paint-wetting-impairment substances (PWIS)
parts to be painted from an injection moulding machine. Connection via plug > Bellows compensate differences in height and enable good adaptation to curved
nipple. or uneven product surfaces

Technical Data
Model / Lip dimensions Number of bellows Material / color Usage temperature [°F]
Item no.
23.011.008._* SKH-B1-11 4.5 1.5 HNBR (ge) 32 - 320
23.015.122._* SKH-B1-15 5 1.5 HNBR (ge) 32 - 320
23.016.016._* SKH-B1-16 6 1.5 HNBR (ge) 32 - 320
23.020.124._* SKH-B1-20 8 1.5 HNBR (ge) 32 - 320
23.030.125._* SKH-B1-30 9 1.5 HNBR (ge) 32 - 320
23.043.096._* SKH-B1-43 12 1.5 HNBR (ge) 32 - 320

Accessories

Suitable fittings

Item no. M5-male M5-female M6-male G1/8-male G1/8-female G1/4-male G1/4-female


23.011.008._* 270.013 (p. 448) -- 270.103 (p. 451) 270.003 (p. 455) 270.015 (p. 459) -- --
23.015.122._* 270.010 (p. 449) 270.005 (p. 450) -- 270.009 (p. 455) 270.007 (p. 460) -- --
23.016.016._* 270.013 (p. 448) -- 270.103 (p. 451) 270.003 (p. 455) 270.015 (p. 459) -- --
23.020.124._* 270.311 (p. 449) -- -- 270.063 (p. 457) 270.061 (p. 461) -- --
270.312/19
23.030.125._* -- -- 270.030 (p. 457) 270.019 (p. 461) 270.274 (p. 465) 270.275 (p. 471)
(p. 452)
23.043.096._* -- -- -- 270.132 (p. 455) 270.114 (p. 460) 270.190 (p. 466) 270.192 (p. 471)

[email protected]
976 24 32 10
Industries | Plastics
Bellows vacuum cups, 2.5 bellows made of HNBR – Series SKH-B2

Bellows vacuum cups, 2.5 bellows made of HNBR – Series SKH-B2

MINIMUM MARKING /
UP TO 320°F

Product Description Advantage


Bellows vacuum cups for uneven surfaces with suitability for removing hot plastic > Free of silicone and other paint-wetting-impairment substances (PWIS)
parts to be painted from an injection moulding machine. Connection via plug > Long vacuum cup stroke and good adaptation to curved or uneven product
nipple. surfaces

Technical Data
Model / Lip dimensions Number of bellows Material / color Usage temperature [°F]
Item no.
21.005.057._* SKH-B2-5 3 2.5 HNBR (ge) 32 - 320
21.007.089._* SKH-B2-7 3 2.5 HNBR (ge) 32 - 320
21.009.002._* SKH-B2-9 2 2.5 HNBR (ge) 32 - 320
21.012.135._* SKH-B2-12 7 2.5 HNBR (ge) 32 - 320
21.014.053._* SKH-B2-14 9 2.5 HNBR (ge) 32 - 320
21.018.010._* SKH-B2-18 8 2.5 HNBR (ge) 32 - 320
21.020.016._* SKH-B2-20 9 2.5 HNBR (ge) 32 - 320
21.032.075._* SKH-B2-32 13 2.5 HNBR (ge) 32 - 320
21.043.049._* SKH-B2-43 19 2.5 HNBR (ge) 32 - 320
21.060.051._* SKH-B2-60 25 2.5 HNBR (ge) 32 - 320

Accessories

Suitable fittings

Item no. M5-male M5-female M6-male G1/8-male G1/8-female G1/4-male G1/4-female


21.005.057._* 270.134 (p. 447) 270.347 (p. 450) 270.104 (p. 451) 270.033 (p. 454) 270.478 (p. 459) -- --
21.007.089._* 270.010 (p. 449) 270.005 (p. 450) -- 270.009 (p. 455) 270.007 (p. 460) -- --
21.009.002._* 270.013 (p. 448) 270.005 (p. 450) 270.103 (p. 451) 270.003 (p. 455) 270.015 (p. 459) -- --
21.012.135._* 270.013 (p. 448) 270.005 (p. 450) 270.103 (p. 451) 270.003 (p. 455) 270.015 (p. 459) -- --
21.014.053._* 270.134 (p. 447) 270.347 (p. 450) 270.104 (p. 451) 270.033 (p. 454) 270.478 (p. 459) -- --
21.018.010._* 270.013 (p. 448) 270.005 (p. 450) 270.103 (p. 451) 270.003 (p. 455) 270.015 (p. 459) -- --
21.020.016._* 270.013 (p. 448) 270.005 (p. 450) 270.103 (p. 451) 270.003 (p. 455) 270.015 (p. 459) 270.194 (p. 463) --
21.032.075._* -- -- 270.315 (p. 452) 270.132 (p. 455) 270.114 (p. 460) 270.190 (p. 466) 270.192 (p. 471)
21.043.049._* -- -- 270.315 (p. 452) 270.132 (p. 455) 270.114 (p. 460) 270.190 (p. 466) 270.192 (p. 471)
21.060.051._* -- -- 270.315 (p. 452) -- -- 270.540 (p. 468) 270.539 (p. 473)

[email protected]
976 24 32 10
Industries | Plastics
Oval vacuum cups made of HNBR – Series SKH-O

Oval vacuum cups made of HNBR – Series SKH-O

MINIMUM MARKING /
UP TO 320°F

Product Description Advantage


> Free of silicone and other paint-wetting-impairment substances (PWIS)
Oval vacuum cups for smooth surfaces suitable for removing hot plastic parts to be > Significantly increased suction force compared to round vacuum cups of the
painted from an injection moulding machine. Connection via plug nipple. same width
> Soft sealing lip also allows adhesion to curved products

Ordering notes
From size 15x5 mm upward, a gripper clamp (available separately) is recommended to prevent inadvertent rotation

Technical Data
Model / Lip dimensions Material / color Usage temperature [°F]
Item no.
132.4x2.031._* SKH-O-4X2A 0.5 HNBR (ge) 32 - 320
132.7x4.034._* SKH-O-7X4 0.8 HNBR (ge) 32 - 320
132.15X5.067._* SKH-O-15X5 1 HNBR (ge) 32 - 320
132.24X8.066._* SKH-O-24X8 1 HNBR (ge) 32 - 320
132.36X12.068._* SKH-O-36X12 2 HNBR (ge) 32 - 320
132.45X15.064._* SKH-O-45X15 3 HNBR (ge) 32 - 320

Accessories

Suitable fittings Suitable clamp

Item no. M3-male M4-male M5-male G1/8-male G1/4-male G1/4-female


132.4x2.031._* 270.014 (p. 446) 270.111 (p. 446) 270.300 (p. 449) -- -- -- --
132.7x4.034._* 270.014 (p. 446) 270.111 (p. 446) 270.300 (p. 449) -- -- -- --
132.15X5.067._* -- -- -- 270.431 (p. 456) -- -- 78.030 (p. 513)
132.24X8.066._* -- -- -- 270.431 (p. 456) -- -- 78.032 (p. 513)
132.36X12.068._* -- -- -- 270.431 (p. 456) -- -- 78.032 (p. 513)
132.45X15.064._* -- -- -- -- 270.097 (p. 464) 270.098 (p. 471) 78.033 (p. 513)

[email protected]
976 24 32 10
Industries | Plastics
Flat vacuum cups with a short stroke, made of HNBR – Series SFK-K

Flat vacuum cups with a short stroke, made of HNBR – Series SFK-K
NEW
MINIMUM MARKING /
UP TO 320°F

Product Description Advantage


Flat vacuum cups with a minimum stroke for flat surfaces. Well suited for removing > Free of silicone and other paint-wetting-impairment substances (PWIS)
hot plastic parts to be painted from an injection moulding machine. Connection via > High suction force with a small footprint.
a form-locking, snap-in aluminum plate. > Minimised wear, as the suction lip does not slide over the product during suction

Technical Data
Model / Lip dimensions Material / color Usage temperature [°F]
Item no.
102.020.458._* SFK-K-20 0.5 HNBR (ge) 32 - 320
102.030.459._* SFK-K-30 0.8 HNBR (ge) 32 - 320
102.045.460._* SFK-K-45 1.2 HNBR (ge) 32 - 320

Accessories

Suitable fittings

Item no. M5-male G1/8-female


102.020.458._* 270.521 (p. 450) --
102.030.459._* -- 270.234 (p. 478)
102.045.460._* -- 270.235 (p. 478)

Dimensions

d3
d2
h1
h2

H
h3

d4
D

[email protected]
976 24 32 10
Series | Bellows suction cups SB
High temperature HNBR bellows cups, 2.5 folds - SKH-B2

High temperature HNBR bellows cups, 2.5 folds - SKH-B2

Up to 320 °F &
Minimum marking

Product description Advantage


Bellows suction cups for uneven surfaces with suitability for removing > Free of silicone and other paint-wetting-impairment substances (PWIS)
hot plastic parts to be painted from an injection molding machine. > Minimum-marking
Connection via plug-in nipple. > Long suction cup stroke and good adaptation to curved or uneven
product surfaces

Technical data

Item no. Model / Lip dimensions Number of folds Material / Color Usage temperature [°F]
21.005.057._* SKH-B2-5 3 2.5 HNBR (ge) 32 - 320
21.007.089._* SKH-B2-7 3 2.5 HNBR (ge) 32 - 320
21.009.002._* SKH-B2-9 2 2.5 HNBR (ge) 32 - 320
21.012.135._* SKH-B2-12 7 2.5 HNBR (ge) 32 - 320
21.014.053._* SKH-B2-14 9 2.5 HNBR (ge) 32 - 320
21.018.010._* SKH-B2-18 8 2.5 HNBR (ge) 32 - 320
21.020.016._* SKH-B2-20 9 2.5 HNBR (ge) 32 - 320
21.032.075._* SKH-B2-32 13 2.5 HNBR (ge) 32 - 320
21.043.049._* SKH-B2-43 19 2.5 HNBR (ge) 32 - 320
21.060.051._* SKH-B2-60 25 2.5 HNBR (ge) 32 - 320

Accessories

Suitable mounting brackets

Item no. M5-male M5-female M6-male G1/8-male G1/8-female G1/4-male G1/4-female


21.005.057._* 270.134 270.347 270.104 270.033 270.478 -- --
21.007.089._* 270.010 270.005 -- 270.009 270.007 -- --
21.009.002._* 270.013 270.005 270.103 270.003 270.015 -- --
21.012.135._* 270.013 270.005 270.103 270.003 270.015 -- --
21.014.053._* 270.134 270.347 270.104 270.033 270.478 -- --
21.018.010._* 270.013 270.005 270.103 270.003 270.015 -- --
21.020.016._* 270.013 270.005 270.103 270.003 270.015 270.194 --
21.032.075._* -- -- 270.315 270.196 270.114 270.190 270.192
21.043.049._* -- -- 270.315 270.196 270.114 270.190 270.192
21.060.051._* -- -- 270.315 -- -- 270.540 270.539

[email protected]
976 24 32 10
Series | Bellows suction cups SB
High temperature HNBR bellows cups, 1.5 folds - SKH-B1

High temperature HNBR bellows cups, 1.5 folds - SKH-B1

Up to 320 °F &
Minimum marking

Product description Advantage


Bellows suction cups for uneven surfaces with suitability for removing > Free of silicone and other paint-wetting-impairment substances (PWIS)
hot plastic parts to be painted from an injection molding machine. > Minimum-marking
Connection via plug-in nipple. > Bellows compensate differences in height and enable good adaptation
to curved or uneven product surfaces

Technical data

Item no. Model / Lip dimensions Number of folds Material / Color Usage temperature [°F]
23.005.178._* SKH-B1-5 2 1.5 HNBR (ge) 32 - 320
23.008.166._* SKH-B1-8 3.5 1.5 HNBR (ge) 32 - 320
23.011.008._* SKH-B1-11 4.5 1.5 HNBR (ge) 32 - 320
23.015.122._* SKH-B1-15 5 1.5 HNBR (ge) 32 - 320
23.016.016._* SKH-B1-16 6 1.5 HNBR (ge) 32 - 320
23.020.124._* SKH-B1-20 8 1.5 HNBR (ge) 32 - 320
23.030.125._* SKH-B1-30 9 1.5 HNBR (ge) 32 - 320
23.043.096._* SKH-B1-43 12 1.5 HNBR (ge) 32 - 320

Accessories

Suitable mounting brackets

Item no. M5-male M5-female M6-male G1/8-male G1/8-female G1/4-male G1/4-female


23.005.178._* 270.153 -- -- -- -- -- --
23.008.166._* 270.153 -- -- -- -- -- --
23.011.008._* 270.013 270.005 270.103 270.003 270.015 -- --
23.015.122._* 270.010 270.005 -- 270.009 270.007 -- --
23.016.016._* 270.013 270.005 270.103 270.003 270.015 -- --
23.020.124._* 270.311 -- -- 270.063 270.061 -- --
23.030.125._* -- -- 270.312/19 270.030 270.019 270.274 270.275
23.043.096._* -- -- 270.315 270.196 270.114 270.190 270.192

[email protected]
976 24 32 10

You might also like