Scribd
Upload
145 views1 page

Fe-1001 W-H

This document provides specifications for an orifice plate flowmeter with flange taps used to measure natural gas flow. Key details include that it has a 1.00345 inch orifice diameter, operates at pressures up to 1600 psig, and is designed to measure flow rates from 1700000 to 4000000 standard cubic feet per day of natural gas at 68 degrees Fahrenheit. The orifice plate element and flanges are made of carbon steel and meet AGA 3 standards.

Uploaded by

Jan Richardo Gultom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
145 views1 page

Fe-1001 W-H

This document provides specifications for an orifice plate flowmeter with flange taps used to measure natural gas flow. Key details include that it has a 1.00345 inch orifice diameter, operates at pressures up to 1600 psig, and is designed to measure flow rates from 1700000 to 4000000 standard cubic feet per day of natural gas at 68 degrees Fahrenheit. The orifice plate element and flanges are made of carbon steel and meet AGA 3 standards.

Uploaded by

Jan Richardo Gultom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Pgas-PTG Kso

AGA Orifice Plate - Concentric - Flange Taps - Gas Flow


Spec. Sheet
MKI Project 4600002525Rev.
WELL CONNECTION TN-G68r Req. Date
By Appr.

Tag Number FE - 1001


Element 1) Design type Concentric
data 2) Design standard AGA 3
3) Element material Carbon steel
4) Ring joint data
5) Manufacturer DANIEL
6) Model
7) Beta ratio (d/D) .318354
8) Orifice diameter 1.00345 in
9) Pipe & flange inside diameter 3.152 in
10) Flange type RAISE FACE
11) Drain hole diameter Not required
12) Element thickness .125 in
13) Option
Flange 1) Flange type RAISE FACE
data 2) Flange material Carbon steel
3) Supplied with flow element
4) Flange rating & facing 900# RF
5) Option
Tap data 1) Pressure tap location Flange taps
2) Pressure tap size
Flowmeter 1) Sensor type
data 2) Differential range 200 inH2O
3) Static pressure range
4) Chart or scale range
5) Chart multiplier 400000
Process 1) Service
data 2) Line number
3) Fluid name NG
4) Fluid state Gas
5) Maximum flowrate 4000000 sft3/d
6) Normal flowrate 1700000 sft3/d
7) Operating pressure 1600 psig
8) Operating temperature 68.19 degF
9) Operating density 7.087 lb/ft3
10) Molecular weight 18.6
11) Cp/Cv specific heat ratio 1.868
12) Operating viscosity .0159 cp
13) Barometric pressure 14.7 psia
14) Calibration temperature 68 degF
15) Base temperature 60 degF
16) Base pressure 14.73 psia
Notes

You might also like