Scribd
Upload
231 views1 page

Pawnee Parts - Full

This document provides instructions for building a small airplane model out of 3mm Depron foam. It includes details on cutting out and assembling the wing, rudder, and fuselage sections, as well as tips on motor mounting, decorating, and flying the finished model. The instructions recommend using a brushless motor and LIPO battery for 3D flying performance.

Uploaded by

Alejandro Lablée
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
231 views1 page

Pawnee Parts - Full

This document provides instructions for building a small airplane model out of 3mm Depron foam. It includes details on cutting out and assembling the wing, rudder, and fuselage sections, as well as tips on motor mounting, decorating, and flying the finished model. The instructions recommend using a brushless motor and LIPO battery for 3D flying performance.

Uploaded by

Alejandro Lablée
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

F2

F3

F3

elavetor 3mm Depron


Motor mounting
F2
When useing a brushless motor be sure to glue the plywood
wing 3mm Depron

bracket firmly. The thrust can be enormous (600-800 grams)


rudder 3mm Depron and can pull out the bracket if not firmly attacht.

3mm Depron
Rudder attachment
Step 1
wing 3mm Depron

Step 2

Step 3

bo You can use clear packing tape for connecting the rudders.
tto
m Use these steps for a strong attachment.

3m
m
De
pro Building tips
n After cutting the pieces out of Depron, you can use a
Steadler or Edding waterproof pen for a collerfull deceration

Before bending the round curves first tape the outside


with clear packing tape. Bend the piece over a round
object such as a table edge. After glueing and drying
remove the tape for weight reduction.

For 3D flying is a Brushless motor and LIPO battery the


best choice.

Let me now how your airoplane performs on:


Visit me on www.geocities.com/rc_pittsspecial
Have lots of fun with this little Depron Airplane!

folding lines

fuselage 3mm Depron

F1
OvdProductions Designer: Olaf van der Plaats
Date: 30 june 2004 Wingspan: 750 mm
Plywood Scale 1:1
Version V1.0
Length:
Wingarea:
680 mm
23 dm2
Max. weight: 300 g
Semi Christen Eagle Wingload: 13 g/dm2

You might also like