Scribd
Upload
1K views1 page

Telehandler Checklist

This document is a checklist for inspecting a telehandler. It contains over 50 individual inspection points to check the condition and proper functioning of the machine's components. Any non-compliant items require tagging out the machine for repair. The inspection covers areas like hydraulic systems, safety equipment, engine fluids, electrical systems, attachments, and operation testing the boom, bucket/forks, brakes, lights and horn. At the end, space is provided to note any faults found and required maintenance, and for the inspector to sign off.

Uploaded by

japv_pas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Telehandler Checklist

This document is a checklist for inspecting a telehandler. It contains over 50 individual inspection points to check the condition and proper functioning of the machine's components. Any non-compliant items require tagging out the machine for repair. The inspection covers areas like hydraulic systems, safety equipment, engine fluids, electrical systems, attachments, and operation testing the boom, bucket/forks, brakes, lights and horn. At the end, space is provided to note any faults found and required maintenance, and for the inspector to sign off.

Uploaded by

japv_pas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Make: ___________________ Model: ______________ REGO/NO: _________

TELEHANDLER CHECKLIST
To Be Completed by a trained operator. WARNING! Do not operate machine if not safe to operate!
If ANY are ticked N for NON-COMPLIANT, Tag out machine and refer this sheet
Visual check of the Telehandler Function Checks Conducted with the engine running. Y/N
Conducted with the engine off. Y/N Boom arm Extends to full height 
Data plate/Load chart plate Fitted & Readable  Bucket/forks Tilts and Crowds to full travel. 
Warning decals Readable  Boom extends Full Travel, Smooth operation. 
Hydraulic Cylinders No Damage  Auxiliary Hydraulics Operations 
Hydraulics No Leaks or Damage  Quick-Hitch Releases Bucket when pin removed. 
Quick-Hitch & Pin Not Seized. No Damage. Clip  Foot Pedals Not fouled. Clean. Operate Correctly. 
Seat and Seat Belt Good Condition & Functional  Control Panel Lights/Gauges/Warning Indicators 
Safety equipment Operating, engine should start.  Lights Work/Spot/Driving 
FOPS/ROPS Secure & Good Condition  Beeper Operates in Reverse 
Tyres & rims Correct inflation, studs tight.  Rotating Beacon Rotates & Visible 
Fluid Leaks No Fluid Leaks under Machine  Park Brake Hold Machine on incline. 
Fuel Level enough for the day’s work  Hydraulic Lockout. Locks controls & Hydraulics. 
Engine Oil Level Correct  Driving Inspection Conducted driving in circle/figure 8 Y/N
Transmission/Gearbox Oil Level Correct  Steering Steers well. No undue noise/stress 
Hydraulic Oil Level Correct  Creep No creeping when controls neutralized. 
Coolant Level Correct  Model-Specific Checks Cross out if not applicable Y/N
Battery Bracket & Terminals Secure & Clean  Bucket (if fitted) Bucket not damaged/loose/worn. 
Battery Electrolyte Levels Correct & Caps in place  Attachment Security Attachment Secure & Pins Secure 
Start Engine Runs & Smooth  Attachment Damage Attachment not damaged 
Horn Operation & Volume  Ground-Engaging Surface Teeth/Cutting edges/loose/worn. 
Faults Identified: _____________________________________________________________________________________________________________________________

Maintenance Required/Administered: ____________________________________________________________________________________________________________

Operator/Inspector Name: ________________________ Signature: __________________________ Date: ___________________ Hours Start: ______________

Finish:
Available free of charge from Ag Training Pty Ltd. 49 Carrington Road Toowoomba Qld 4350. P 07 4634 6887 E [email protected] W www.agtraining.com.au

You might also like