Scribd
Upload
162 views10 pages

Use Mesh Analysis To Obtain

This document contains a tutorial on mesh analysis with 22 example circuit problems. The tutorial is for an Electric Circuit I course and teaches students how to use mesh analysis to solve for unknown currents, voltages, power values, and current/voltage gains in circuits containing resistors and voltage/current sources. For each circuit diagram and problem, the expected solution is provided.

Uploaded by

azizi abdullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
162 views10 pages

Use Mesh Analysis To Obtain

This document contains a tutorial on mesh analysis with 22 example circuit problems. The tutorial is for an Electric Circuit I course and teaches students how to use mesh analysis to solve for unknown currents, voltages, power values, and current/voltage gains in circuits containing resistors and voltage/current sources. For each circuit diagram and problem, the expected solution is provided.

Uploaded by

azizi abdullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 10

EET 140 - Electric Circuit I

TUTORIAL
MESH ANALYSIS

Question 1
Use mesh analysis to obtain io in the circuit of Figure 1

Figure 1

(ANS: -1.7333A)

Question 2
Find current i in the circuit in Figure 2.

Figure 2

(ANS: 8.561A)

Diploma in Electrical Engineering 1


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 3
Apply mesh analysis to find vo in the circuit in Figure 3.

Figure 3

(ANS: 10.667A, 33.78V)

Question 4
Use mesh analysis to find i1, i2, and i3 in the circuit of Figure 4.

Figure 4

(ANS: 3.5A, -0.5A, 2.5A)

Diploma in Electrical Engineering 2


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 5
Determine v1 and v2 in the circuit of Figure 5 using mesh analysis.

Figure 5
(ANS: 6V, 6V)

Question 6
Calculate the current gain io/is in the circuit of Figure 6 using mesh analysis.

Figure 6

(ANS: -0.3)

Diploma in Electrical Engineering 3


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 7
Find the mesh currents i1, i2, and i3 in the network of Figure 7.

Figure 7
(ANS: 2mA, 6mA, 2mA)

Question 8
Find the current in and the voltage across, the 2Ω resistor in Figure 8.

Figure 8
(ANS: 5A, 10V)

Diploma in Electrical Engineering 4


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 9
Solve for I1 and I2 of the network of Figure 9 by mesh analysis.

Figure 9

(ANS: 0.37A, -1.85A)

Question 10
Determine the current supplied by the 100V battery in the circuit of Figure 10 using mesh
analysis.

Figure 10
(ANS: 7.5A)

Diploma in Electrical Engineering 5


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 11
Determine the current I supplied by the battery to the resistive network shown in Figure
11 using mesh analysis.

Figure 11
(ANS: 0.3A)

Question 12
For the network shown in Figure 12, calculate the power supplied (or absorbed) by each
voltage source. Use mesh analysis.

Figure 12
(ANS: 1230.77W, 576.9W, 4769.14W)

Diploma in Electrical Engineering 6


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 13
Solve for the current in the 2Ω resistor of the network of Figure 13 by mesh analysis.

Figure 13
(ANS: 2.98A)

Question 14
Using mesh analysis, find the current I1 and I2 in the network of Figure 14.

Figure 14
(ANS: 5A, 10A)

Diploma in Electrical Engineering 7


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 15
Solve for the current in 5Ω resistor of the circuit in Figure 15.

Figure 15
(ANS: 1.5A)

Question 16
In the circuit of Figure 15, find the voltage across ab if the 5Ω resistor is removed and the
terminals ab are open circuited.

(ANS: 22.5V)

Question 17
Find the current in the 10Ω resistor of the circuit shown in Figure 16 using mesh analysis.

Figure 16
(ANS: -1A)

Diploma in Electrical Engineering 8


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 18
By applying only mesh equations to the circuit of Figure 17, find the power dissipated in
the 20Ω resistor.

Figure 17
(ANS: 7.469W)

Question 19
Solve for the power supplied by the 12V source shown in Figure 18 by network
reduction, source transformation and finally using KVL and KCL.

Figure 18
(ANS: 46.56W)

Question 20
Without using network reduction and source transformation, solve Question 19 by using
only mesh equations.
(ANS: 46.59W)

Diploma in Electrical Engineering 9


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi
EET 140 - Electric Circuit I

Question 21
Determine the power supplied(or absorbed) by the controlled voltage source in the
network of Figure 19.

Figure 19
(ANS: 1008W)

Question 22
Transform the two current source in the circuit of Figure 20 to voltage sources and find
the current in the 4Ω resistor using mesh analysis.

Figure 20
(ANS: 5A)

Diploma in Electrical Engineering 10


Universiti Malaysia Perlis (UniMAP)
Prepared by Hasnizam Hanafi

You might also like