Scribd
Upload
110 views4 pages

Work Sheet 2 Logic IC Implementation

This document provides instructions for a laboratory exercise on implementing logic gates using integrated circuits (ICs). The objectives are to understand the differences between transistor-transistor logic (TTL) and complementary metal-oxide-semiconductor (CMOS) ICs, implement logic gates using actual ICs, complete truth tables, and measure output voltages. Students are instructed to test various logic ICs - NAND, NOT, OR, EXOR, and NOR gates - by connecting the ICs to a logic trainer, applying input combinations, observing outputs, and filling in truth tables and voltage measurements. Questions are also provided to check students' understanding of TTL vs CMOS and digital logic gates.

Uploaded by

Mehrez Saafi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views4 pages

Work Sheet 2 Logic IC Implementation

This document provides instructions for a laboratory exercise on implementing logic gates using integrated circuits (ICs). The objectives are to understand the differences between transistor-transistor logic (TTL) and complementary metal-oxide-semiconductor (CMOS) ICs, implement logic gates using actual ICs, complete truth tables, and measure output voltages. Students are instructed to test various logic ICs - NAND, NOT, OR, EXOR, and NOR gates - by connecting the ICs to a logic trainer, applying input combinations, observing outputs, and filling in truth tables and voltage measurements. Questions are also provided to check students' understanding of TTL vs CMOS and digital logic gates.

Uploaded by

Mehrez Saafi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SULTANATE OF OMAN

MINISTRY OF MANPOWER
Directorate General of Vocational Training
Fishermen Training Institute Salalah

Department: Engineering Section: Electronics Specialization: Electronic Instrument Maintenance


Course Name: Fundamental Digital Electronics and Circuits Course Code: EECIM1203
Credit Hour: Week: 2 Date:
Exe
‫ا‬
Work Sheet # 2: Logic IC Implementation

NAME: _______________________________________
S.N Apparatus/Equipment Max
Crieria Mark
Score
1 IDL 800 Trainer
2 Digital Multimeter Proper Wiring 10
3 IC Tester Proper method of
10
4 measurement
5 Truth Table / Data
10
6 Correctness
Safety/Cleanliness 5
Participation /Behavior 5
Total 40

OBJECTIVES: The student should be able to:


 Understand the difference between TTL and CMOS Logic IC
 Implement logic gate and verify functions using actual ICs
 Complete truth table and measure output voltage
 Test Logic IC using the IC Tester

PROCEDURES:
1. Test the logic IC on the Logic Trainer
2. Place the IC on digital trainer kit.
3. Connect Vcc and Ground to respective pins of digital IC.
4. Connect the input to the input switches provided in the trainer kit.
5. Connect the outputs to the switches of O/P LED in the trainer kit.
6. Apply various combinations of inputs according to the truth table and observe the
condition of LEDs and complete the truth table
7. Measure the output voltage readings for various inputs multimeter.
1. NAND Gate

a. Complete the wiring diagram as described in the instruction above.

c cvA
v
A

IC Pin Configuration Truth Table (LED) Voltage Measurement

A B Y A B Y

7400

a. Fill in the blank:


i. IC 7400 is a ___________ (TTL / CMOS) Logic IC.
ii. Pin 14 of IC 7400 is connected to __________.
iii. Pin 7 of IC 7400 is connected to __________.
2. NOT Gate

IC Pin Configuration Truth Table (LED) Voltage Measurement

A Y A Y
7404: 1 1
0 0

A Y A Y
4069 1 1
0 0

a. Fill in the blank:


i. IC 7404 is a ___________ (TTL / CMOS) Logic IC.
ii. IC 7404 requires _______Vcc at pin 14.
iii. IC 4069 is a ____________ (TTL / CMOS) Logic IC.
iv. IC 7404 requires ________Vcc at pin 14.

3. OR Gate

IC Pin Configuration Truth Table (LED) Voltage Measurement

A B Y A B Y

7432

a. Fill in the blank:


i. IC 7432 is a ___________ (TTL / CMOS) Logic IC.
ii. Pin 14 of IC 7432 is connected to __________.
iii. Pin 7 of IC 7432 is connected to __________.
4. EXOR Gate
IC Pin Configuration Truth Table (LED) Voltage Measurement

A B Y A B Y

7486

a. Fill in the blank:


i. IC 7486 is a ___________ (TTL / CMOS) Logic IC.
ii. Pin 14 of IC 7486 is connected to __________.
iii. Pin 7 of IC 7486 is connected to __________.

5. NOR Gate

IC Pin Configuration Truth Table (LED) Voltage Measurement

A B Y A B Y

4001

a. Fill in the blank:


i. IC 4001 is a ___________ (TTL / CMOS) Logic IC.
ii. Pin 14 of IC 4001 is connected to __________.
iii. Pin 7 of IC 4001 is connected to __________.
True or False:
1. The CMOS and the TTL Logic ICs have the same voltage requirement. ______
2. The TTL Logic IC uses the Field Effect Transistors in their internal circuit. ____
3. TTL stands for Transistor Transformer Logic. _______________
4. The CMOS Logic IC uses the Field Effect Transistors in their internal circuit. ____
5. The digital logic gates can have 2 or more inputs._________

Name of the Staff : Carla Mendoza Head of the Department : Mr. Emad Doggui

You might also like