Scribd
Upload
585 views1 page

AF-11 Antifoam Datasheet

AF-11 is an antifoam product formulated with polyglycol polymers to control foaming in amine units without detrimental effects. It has a clean or opaque appearance, molecular weight of 2,000 g/mol, and pH between 5-7.5. AF-11 is used as needed when foaming occurs and injected directly or diluted. Proper safety precautions and disposal methods are required when handling AF-11.

Uploaded by

saeid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
585 views1 page

AF-11 Antifoam Datasheet

AF-11 is an antifoam product formulated with polyglycol polymers to control foaming in amine units without detrimental effects. It has a clean or opaque appearance, molecular weight of 2,000 g/mol, and pH between 5-7.5. AF-11 is used as needed when foaming occurs and injected directly or diluted. Proper safety precautions and disposal methods are required when handling AF-11.

Uploaded by

saeid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AF-11 Antifoam

Formulated Antifoam for Amine Units


Product Characteristics
Amine Filtration Company Antifoam AF-11 is an antifoam product that is formulated with
several polyglycol polymers for best results in Amine Units when foaming events occur in
the amine absorber or regenerator. AF-11 is designed specifically for amine units to control
foaming events without causing other detrimental effects to the amine unit and solvent.
The product is used on an as-needed basis when foaming commences to occur.
Appearance
• Clean or slightly opaque
• CAS #: 9003-11-6
Specifications
• Chemical family: Polyglycol
• Molecular weight: 2,000 g/mol
• pH value: 5 – 7.5
Product Data Sheet

• Freezing point: approx. -29 oC


• Boiling point: > 300 oF
• Vapor pressure: < 0.1 mmHg (@ 25 oC)
• Relative density: 1.01 (@ 25 oC)
• Dynamic viscosity: 325 mPa.s (@ 25 oC)
• Packaging: 55 gal drums or 330 gallon totes

Product Usage
Amine Filtration Company recommends using AF-11 only when foaming begins to occur,
and not on a continuous basis. The need for continuous use of any antifoam product
generally means that further steps for proactive foam prevention should be implemented.
The product should be injected directly or diluted with a proper solvent such as methanol
or a dispersant medium such as water. For more information on antifoam products,
contact [email protected]

Safety & Disposal


In case of contact with skin, wash thoroughly with soap and water and seek medical
attention if irritation develops. In case of contact with eyes, wash under running water
with eyelids open for 15 minutes and seek medical attention. If swallowed, rinse mouth,
drink plenty of water and do not induce vomiting; immediate medical attention is required.
Disposal of AF-11 should comply with all applicable local, state and federal guidelines.
Tel +1 (832) 296 6624 www.AmineFiltration.com

You might also like