Scribd
Upload
324 views2 pages

Sample PQR Form (GTAW & SMAW - Page 1) Procedure Qualification Record (PQR)

This document contains sample forms for a Procedure Qualification Record (PQR) used to document welding procedures for steel structures. The first page collects information about the base and filler metals, joint details, welding process parameters, and postweld heat treatment if used. The second page documents the required tests, including visual inspection, nondestructive testing, bend tests, and toughness tests. Test results are recorded and certified to verify the welding procedure meets the requirements of the structural welding code.

Uploaded by

Luis Carlos Clericci Limon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
324 views2 pages

Sample PQR Form (GTAW & SMAW - Page 1) Procedure Qualification Record (PQR)

This document contains sample forms for a Procedure Qualification Record (PQR) used to document welding procedures for steel structures. The first page collects information about the base and filler metals, joint details, welding process parameters, and postweld heat treatment if used. The second page documents the required tests, including visual inspection, nondestructive testing, bend tests, and toughness tests. Test results are recorded and certified to verify the welding procedure meets the requirements of the structural welding code.

Uploaded by

Luis Carlos Clericci Limon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AWS D1.1/D1.

1M:2015 ANNEX M

Sample PQR Form (GTAW & SMAW – page 1)


PROCEDURE QUALIFICATION RECORD (PQR)

Company Name PQR No. Rev. No. Date

Type or AWS
BASE METALS Specification Grade Group No. Thickness Size (NPS) Schedule Diameter
Base Material
Welded To
Backing Material
Other

JOINT DETAILS JOINT DETAILS (Sketch)


Groove Type
Groove Angle
Root Opening
Root Face
Backgouging
Method

POSTWELD HEAT TREATMENT


Temperature
Time at Temperature
Other

PROCEDURE
Weld Layer(s)
Weld Pass(es)
Process
Type (Manual, Mechanized, etc.)
Position
Vertical Progression
Filler Metal (AWS Spec.)
AWS Classification
Diameter
Manufacturer/Trade Name
Shielding Gas Compos. (GTAW)
Flow Rate (GTAW)
Nozzle Size (GTAW)
Preheat Temperature
Interpass Temperature
Electrical Characteristics — — — — — — — —
Electrode Diameter (GTAW)
Current Type & Polarity
Amps
Volts
Cold or Hot Wire Feed (GTAW)
Travel Speed
Maximum Heat Input
Technique — — — — — — — —
Stringer or Weave
Multi or Single Pass (per side)
Oscillation (GTAW Mech./Auto.)
Traverse Length
Traverse Speed
Dwell Time
Peening
Interpass Cleaning
Other
Form M-1 (Front) (See http://go.aws.org/D1forms)
ANNEX M AWS D1.1/D1.1M:2015

Sample PQR Form (Test Results – page 2)


PROCEDURE QUALIFICATION RECORD (PQR) TEST RESULTS

PQR No. Rev. No.


TESTS
✓ Type of Tests Clause/Figure(s) Reference Acceptance Criteria Result Remarks
Visual Inspection 4.9.1 4.9.1
Radiographic Examination 4.9.2.1 4.9.2.2
Ultrasonic Testing 4.9.2.1 4.9.2.2
2 Transverse Root Bends 4.9.3.1/Fig. 4.8 4.9.3.3
2 Transverse Face Bends 4.9.3.1/Fig. 4.8 4.9.3.3
2 Longitudinal Root Bends 4.9.3.1/Fig. 4.8 4.9.3.3
2 Longitudinal Face Bends 4.9.3.1/Fig. 4.8 4.9.3.3
2 Side Bends 4.9.3.1/Fig. 4.9 4.9.3.3
4 Side Bends 4.9.3.1/Fig. 4.9 4.9.3.3
2 Tensile Tests 4.9.3.4/Fig. 4.10 4.9.3.5
All-Weld-Metal Tensions 4.9.3.6/Figs. 4.14 and 4.18 4.14.1.3(b)
3 Macroetch 4.9.4 4.9.4.1
4 Macroetch 4.9.4 4.9.4.1
CVN Tests 4 Part D/Fig. 4.28 4.30 and Table 4.14

TENSILE TEST DETAILS


Specimen Ultimate Ultimate Type of
Number Width Thickness Area Tensile Load Unit Stress Failure and Location

TOUGHNESS TEST DETAILS


Specimen Notch Specimen Test Absorbed Percent Lateral
Number Location Size Temperature Energy Shear Expansion Average

CERTIFICATION
Welder’s Name ID Number Stamp Number Tests Conducted by
Laboratory
Test Number
File Number

We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in
accordance with the requirements of Clause 4 of AWS D1.1/D1.1M, ( __________ ) Structural Welding Code—Steel.
(year)

Title

Name Signature

Date
Form M-1 (Back)
(See http://go.aws.org/D1forms)

You might also like