CPCD30

Diesel
Pneumatic Tire Forklifts

Model Capacity @ 500 mm LC Fuel Type Engine

CPCD30 3,000 kg Diesel Xinchai A490BPG/ 2.54L
CPCD30 3,000 kg Diesel ISUZU AK-C240PKJ-30/2.369L
CPCD30  
Diesel • Pneumatic Tire Forklifts

1 Model CPCD30 CPCD30

2 Power Type Diesel Diesel
General
3 Base Capacity @ rated load center kg 3,000 3,000
4 Load Center mm 500 500
5 Service Weight unloaded kg 4,360 4,360
Weights 6 loaded / unloaded, front kg 6,580 / 1,830 6,580 / 1,830
Axle Load
7 loaded / unloaded, rear kg 780 / 2,530 780 / 2,530
8 Tire Type Pneumatic Pneumatic
9 Wheels front / rear 2/2 2/2
10 Wheelbase mm 1,700 1,700
Tires
11 front 28X9-15-12PR 28X9-15-12PR
Tire Size
12 rear 6.50-10-10PR 6.50-10-10PR
13 Tread Width front / rear 1,000 / 980 1,000 / 980
14 Max. Fork Height with std 2-stage mast mm 3,000 3,000
15 Freelift with std 2-stage mast mm 135 135
16 Height, Upright Lowered with std 2-stage mast mm 2,124 2,124
17 Height, Upright Extended with std 2-stage mast mm 4,120 4,120
Mast
18 Mast Tilt, Fwd/Back with std 2-stage mast deg 6o / 12o 6o / 12o
19 Carriage width mm 1,100 1,100
20 Fork Spread minimum / maximum mm 272/ 1,072 272 / 1,072
21 Fork Dimensions TxWxL mm 45 x 122 x 1070 45 x 122 x 1070
22 Length to Fork Face with std 2-stage mast mm 2,676 2,676
23 Overall Width mm 1,266 1,266
24 Overhead Guard Height mm 2,125 2,125
25 Turning Radius minimum outside mm 2,400 2,400
Chassis
26 Fork Overhang with std 2-stage mast mm 496 496
27 Right Angle Stack add load length and clearance mm 4,166 4,166
28 minimum loaded mm 130 130
Gound Clearance
29 center of wheelbase mm 140 140
30 Travel Speed loaded / unloaded km/h 19 / 19 19/ 19
31 Lift Speed loaded / unloaded m/s 0.4 / 0.45 0.4 / 0.45
Performance 32 Lower Speed loaded / unloaded m/s 0.46 / 0.4 0.46 / 0.4
33 Max. Drawbar Pull loaded kg 1,650 1,650
34 Max. Gradeability loaded / unloaded % 18 / 20 18 / 20
35 service Foot / Hyd Foot / Hyd
Brakes
36 parking Hand / Mech Hand / Mech
37 manufacturer Xinchai ISUZU
38 model A490BPG AK-C240PKJ-30
Systems 39 emission compliance China Tier II Euro Tier III
40 Engine cylinders 4 4
41 displacement liter 2.54 2.369
42 rated power kw/rpm 36.8 / 2,650 35.4 / 2,500
43 max. torque N·m/rpm 148 / 1,850 137.7 / 1,800
 
 

Specifications and designs are subject to change without notice. Machines shown may include optional equipment.

01/2013 Designed by LiuGong

Guangxi Liugong Machinery Co., Ltd.
No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China
T: +86 772 3886124 E: [email protected]
www.liugong.com