Scribd
Upload
248 views

Bootloader Commands

The document describes various bootloader commands that can be sent by a host to a microcontroller. It lists 12 commands that the bootloader supports, including commands to get the bootloader version, read chip identification, erase flash memory sectors, write memory, enable and disable read/write protection. Each command returns a success or error code to indicate if the operation was completed successfully.

Uploaded by

Noid Noid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
248 views

Bootloader Commands

The document describes various bootloader commands that can be sent by a host to a microcontroller. It lists 12 commands that the bootloader supports, including commands to get the bootloader version, read chip identification, erase flash memory sectors, write memory, enable and disable read/write protection. Each command returns a success or error code to indicate if the operation was completed successfully.

Uploaded by

Noid Noid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Supported Bootloader Commands

Host Sends Command Bootloader Notes


Code Replies
BL_GET_VER 0x51 Bootloader This command is
version used to read the
number bootloader version
(1byte) from the MCU
BL_GET_HELP 0x52 All supported This command is
Command used to know what
codes are the commands
(10 bytes) supported by the
bootloader
BL_GET_CID 0x53 Chip This command is
identification used to read the
number MCU chip
(2 bytes) identification
number
BL_GET_RDP_STATUS 0x54 Returns the This command is
FLASH Read used to read the
Protection FLASH Read
level. Protection level.
(1byte)
BL_GO_TO_ADDR 0x55 Success or This command is
Error Code used to jump
(1byte) bootloader to
specified address.
BL_FLASH_ERASE 0x56 Success or This command is
Error Code used to mass erase
(1byte) or sector erase of
the user flash .
BL_MEM_WRITE 0x57 Success or This command is
Error Code used to write data
(1byte) in to different
memories of the
MCU
BL_EN_R_W_PROTECT 0x58 Success or This command is
Error Code used to enable
(1byte) read/write protect
on different sectors
of the user flash .
BL_MEM_READ 0x59 Memory This command is
contents of used to read data
length asked from different
by the host. memories of the
microcontroller.
TODO: This is left as
exercise for the
student
BL_READ_SECTOR_STATUS 0x5A All sector This command is
status used to read all the
(2bytes) sector protection
status.
BL_OTP_READ 0x5B OTP contents This command is
used to read the
OTP contents.
TODO: This is left as
exercise for the
student
BL_DIS_R_W_PROTECT 0x5C Success or This command is
Error Code used to disable
(1byte) read/write
protection on
different sectors of
the user flash . This
command takes the
protection status to
default state.

You might also like