Scribd
Upload
345 views1 page

03.i. Pipe Data Sheet

The pipe data sheet provides specifications for a buried gravity storm water pipe with a nominal diameter of 1,200 mm for the NPP0085 Strategic Food Security Facilities project. The pipe will be made of glass reinforced plastic (GRP) via filament winding. It must have a minimum total wall thickness of 22.7 mm and withstand a design pressure of gravity and a site hydrostatic test pressure of 1.5 barg.

Uploaded by

Balaji Naik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
345 views1 page

03.i. Pipe Data Sheet

The pipe data sheet provides specifications for a buried gravity storm water pipe with a nominal diameter of 1,200 mm for the NPP0085 Strategic Food Security Facilities project. The pipe will be made of glass reinforced plastic (GRP) via filament winding. It must have a minimum total wall thickness of 22.7 mm and withstand a design pressure of gravity and a site hydrostatic test pressure of 1.5 barg.

Uploaded by

Balaji Naik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

P I P E    D A T A    S H E E T S

Project NPP0085 Strategic Food Security Facilities.
Client Al Jaber Engineering LLC.

Pipe Design Parameters Value Units

Service Strom Water ‐
Installation Type Buried ‐
System Thrust Balance Non‐Restrained ‐
Product Type GRP ‐
Manufacturing Process Filament Winding ‐
Joint Type Double Bell Coupler ‐
Nominal Diameter 1,200 mm
Design Pressure Gravity Barg
Site Hydrostatic Test Pressure 1.5 Barg
Required Vacuum Rating Full Vacuum Barg

Pipe Dimensions Value Units

Maximum Pipe Length 12,000 mm
Minimum Total Wall Thickness 22.7 mm
Liner Thickness 2.0 mm
Resin Type Vinyl Ester ‐
Glass Type C‐Veil + Chop ‐
Structural Wall Thickness 20.4 mm
Resin Type Isophthalic ‐
Glass Type E‐Glass ‐
Aggregate Silica Sand (Max. 60% by Weight) ‐
Top Coat Thickness 0.3 mm

Pipe Mechanical Properties Value Units

Minimum Pipe Stiffness (ASTM D 2412) 10,000 Pa

Note: FPI producion range for GRP pipes is DN 200 ‐ 4000 mm.

RFQ‐207‐16‐QTR‐VETM‐TEC‐PDS R0‐Gravity‐DN 1200 mm  Form Number: TSD‐CEN‐PDS R0
24/05/2018 Page: 1 of 1 Issue Date: Jan 01, 2014

You might also like