ATMOSPHERIC FOAM CONCENTRATE
STORAGE TANK HD FIRE PROTECT
PVT. LTD.
TECHNICAL DATA
STORAGE CAPACITY 150 to 17500 Ltrs.
MATERIAL OF Stainless Steel
CONSTRUCTION (304 or 316)
EXPANSION DOME 2% of total tank capacity
FINISH Red RAL 3001 or Yellow
ORDERING Specify Tank capacity,
INFORMATION Material of construction of
tank. Optional: Accessories.
APPLICATION
Atmospheric storage tanks are used with Inline Foam The tank is provided with following as standard supply.
Inductor, Balance Pressure Foam Proportioner and
1. Fill connection with expansion dome.
Inline Balance Pressure Foam Proportioning system.
2. Drain connection at bottom.
SPECIFICATION 3. Flanged suction connection at the bottom of tank.
The atmospheric foam concentrate storage tank is 4. Flanged return connection at the bottom or
made of stainless steel. All the tanks must be kept at the top of tank.
filled upto the level of half way of expansion dome. The
5. Site Gauge
tank is provided with an expansion dome with a volume
not less than 2% of the total capacity of the tank. 6. Air Vent
A sediment sump is provided at the bottom of the 7. Lifting Hook
concentrate tank. The tank is provided with an inlet,
an outlet, a drain connection and a fill connection. Optional Supply
Mineral oil shall be placed on the surface of the Foam 1. Pressure Vaccum Vent
Concentrate in the tank to a depth of approximately 2. Ladder
6mm. This will service to minimise Foam Concentrate
contact with air. 3. Level Switch
4. Custom connection size, type & location
LIMITED WARRANTY
HD FIRE PROTECT PVT. LTD. hereby referred to as HD FIRE warrants to the original purchaser of the fire protection products manufactured by HD FIRE and to any other person
to whom such equipment is transferred, that such products will be free from defect in material and workmanship under normal use and care, for two (2) years from the date of
shipment by HD FIRE. Products or Components supplied or used by HD FIRE, but manufactured by others, are warranted only to the extent of the manufacturer’s warranty.
No warranty is given for product or components which have been subject to misuse, improper installation, corrosion, unauthorized repair, alteration or un-maintained.
HD FIRE shall not be responsible for system design errors or improper installation or inaccurate or incomplete information supplied by buyer or buyer’s representatives.
HD FIRE will repair or replace defective material free of charge, which is returned to our factory, transportation charge prepaid, provided after our inspection the material is
found to have been defective at the time of initial shipment from our works. HD FIRE shall not be liable for any incidental or consequential loss, damage or expense arising directly
or indirectly from the use of the product including damages for injury to person, damages to property and penalties resulting from any products and components manufactured
by HD FIRE. HD FIRE shall not be liable for any damages or labour charges or expense in making repair or adjustment to the product. HD FIRE shall not be liable for any
damages or charges sustained in the adaptation or use of its engineering data & services. In no event shall HD Fire’s product liability exceed an amount equal to the sale price.
The foregoing warranty is exclusive and in lieu of all other warranties and representation whether expressed, implied, oral or written, including but not limited
to, any implied warranties or merchantability or fitness for a particular purpose. All such other warranties and representations are hereby cancelled.
NOTICE :
The equipment presented in this bulletin is to be installed in accordance with the latest publication standards of NFPA or other similar organisations and also with the
provision of government codes or ordinances wherever applicable.
The information provided by us is to the best of our knowledge and belief, and consist of general guidelines only. Site handling and installation control is not in our scope.
Hence we give no guarantee for result and take no liability for damages, loss or penalties whatsoever, resulting from our suggestion, information, recommendation or
damages due to our product.
Product development is a continuous programme of HD FIRE PROTECT PVT. LTD. and hence the right to modify any specification without prior notice is reserved with
the company.
D-6/2, ROAD NO. 34, WAGLE INDUSTRIAL ESTATE, THANE 400 604, INDIA.
HD FIRE PROTECT PVT. LTD. • TEL: + (91) 22 2158 2600 • FAX: +(91) 22 2158 2602
Protecting What Matters Most to You • EMAIL: [email protected] • WEB: www.hdfire.com
MARCH, 2018 PAGE 1 OF 1 HD 192
